A new phosphor Li2B4O7: Cu for TLD.

M Takenaga; O Yamamoto; T Yamashita

doi:10.1097/00004032-198304000-00009

Home/Archive/PubMed

PubMed · 6841096

A new phosphor Li2B4O7: Cu for TLD.

M Takenaga·O Yamamoto·T Yamashita

View original source ↗Export metadata ↓

Abstract

The phosphor Li2B4O7: Cu (0.03% by weight) has an effective atomic number of 7.3, which is very similar to that of tissue (7.4). This suggests that the phosphor should have excellent properties for thermoluminescent dosimetry. The phosphor prepared by a sintering method shows two glow peaks composed of a dosimetric peak at 205 degrees C and a shoulder at 120 degrees C, and a broad emission band peaking at 368 nm. The material based on the stoichiometric compound of Li2O . 2B2O3 has a good moisture resistant property. The dosimetric characteristics are as follows: (1) The sensitivity of gamma rays is about 20 times higher than that of Li2B4O2: Mn prepared by the conventional melting method. (2) The dosimetry peak of 205 degrees C fades less than 9% in intensity at 25 degrees C after 60 days in dark. (3) The TL output is linear with exposure to about 10(5) R, becoming sublinear above it. (4) The sensitivity loss caused by humidity is about 10-25% after 2-6 months of storage in air of 90% relative humidity at 25 degrees C. (5) The energy dependence of TL output for photons is flat within the limit of 10% from 40 keV to 7 MeV. (6) The light induced fading is 10% after 3 h room lighting at 1000 lux.

Explore related subjects

Borates Copper Gamma Rays Lithium Lithium Compounds Thermoluminescent Dosimetry Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

M Takenaga, O Yamamoto, T Yamashita. 1983. A new phosphor Li2B4O7: Cu for TLD.. https://doi.org/10.1097/00004032-198304000-00009

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2001

LiBF4-mediated C-glycosylation of glycals with allyltrimethylsilane: a facile synthesis of allyl C-glycosylic compounds.

The treatment of glycals with allyltrimethylsilane in the presence of lithium tetrafluoroborate in acetonitrile gave the corresponding allyl 2,3-unsaturated C-glycosylic compounds in excellent yields with high anomeric selectivity.

Borates↗

PubMed2001

Separation of N2-ethyl-2'-deoxyguanosine-5'-monophosphate and four native deoxyribonucleoside monophosphates using capillary zone electrophoresis with polyethylene glycol as buffer additive.

We investigated the separation of five deoxyribonucleoside monophosphates: 2'-deoxyguanosine-5'-monophosphate (dGMP), 2'-deoxyadenosine-5'-monophosphate (dAMP), 2'-deoxycytosine-5'-monophosphate (dCMP), 2'-deoxythymidine-5'-monophosphate (dTMP) and a dGMP adduct possessing N2-ethyl-guanine, which has been noted in relation to mutagenesis of alcohol, using capillary zone electrophoresis (CZE). The concentration of polyethylene glycol (PEG) as a modifier and the pH of the running solutions can efficiently control the observed separation. Interaction of PEG with analytes was quantitatively evaluated. PEG worked effectively as a hydrophobic selector in these separations. The values of pKa of the acidic-NH-groups in the base moieties of dGMP, dTMP, and the dGMP adduct are close to that of boric acid used as buffer of the running solutions. The control of their charge was facilitated, enabling improved separations. A more sufficient and fast separation was achieved by both optimization of pH of the running solutions and PEG concentration compared with that obtained by pH control alone. On-line concentration using a stacking method followed by the PEG-assisted CZE was briefly studied.

Borates↗

PubMed2001

Particle electrophoresis for quality assurance and process control.

Process control is an increasingly important issue as life science companies world-wide strive for recognition of their manufacturing and product development quality measures according to International Standards Organization (ISO) or good manufacturing practices (GMP) standards. Analytical particle electrophoresis (APE) has the potential for significant contributions, not just to basic research, but also in process development and control in manufacturing environments. An important feature of colloidal (small) particles, which controls their behavior, is their surface charge. Optimization of life science products and process conditions involving small particles (>100 nm) may be approached by a variety of strategies based upon direct measurements of the charge properties of process particles or "reporter" particles. The availability of increasingly powerful instruments and control particle preparations (National Institute of Standards and Technology ((NIST) and others) for validation of instrument operation make the method more attractive than ever. We summarize highly flexible electrophoretic strategies for assessing process consistency both from the perspective of particles being processed as well as the processing environment and describe principles for the use of polymer microspheres both as control particles for validation of instrument operation as well as for probes of the assay medium.

Borates↗