PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 6943909

Stress distribution in diametral compression tests.

L Ehrnford
View original source ↗Export metadata ↓

Abstract

In an attempt to find an explanation for an experimentally found strong connection between the extension of the loaded area and the load required for fracture, an analysis of the diametral compression test was carried out by means of the finite element method. The distribution of the stresses in a quadrant of a circular specimen section was studied for varying contact surface but at a given load distribution within this surface. Below a limit value for the width of the contact surface tensile stresses appeared peripherically outside the contact area, which had a magnitude exceeding those stresses which are centrally located and should normally initiate fracture. For that reason, peripheral fracture initiation must be regarded as a possibility. Only marginal importance could be attached to changes in the extension and magnitude of the central tensile stresses, as compared with the potential impact of the peripheral tensile stresses.

Explore related subjects

Dental MaterialsMethodsStress, MechanicalTensile StrengthJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L Ehrnford. 1981. Stress distribution in diametral compression tests.. https://doi.org/10.3109/00016358109162259

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Interphase effects in dental nanocomposites investigated by small-angle neutron scattering.

Small-angle and ultrasmall-angle neutron scattering (SANS and USANS) were used to characterize silica nanoparticle dispersion morphologies and the interphase in thermoset dimethacrylate polymer nanocomposites. Silica nanoparticle fillers were silanized with varying mass ratios of 3-methacryloxypropyltrimethoxysilane (MPTMS), a silane that interacts with the matrix through covalent and H-bonding, and n-octyltrimethoxysilane (OTMS), a silane that interacts through weak dispersion forces. Interphases with high OTMS mass fractions were found to be fractally rough with fractal dimensions, D(s), between 2.19 and 2.49. This roughness was associated with poor interfacial adhesion and inferior mechanical properties. Mean interparticle distances calculated for composites containing 10 mass % and 25 mass % silica suggest that the nanoparticles treated with more MPTMS than OTMS may be better dispersed than OTMS-rich nanoparticles. The results indicate that the covalent bonding and H-bonding of MPTMS-rich nanoparticles with the matrix are necessary for preparing well-dispersed nanocomposites. In addition, interphases containing equal masses of MPTMS and OTMS may yield composites with overall optimal properties. Finally, the combined SANS/USANS data could distinguish the differences, as a function of silane chemistry, in the nanoparticle/silane and silane/matrix interfaces that affect the overall mechanical properties of the composites.

Dental Materials↗
PubMed2007

Size control of silica nanoparticles and their surface treatment for fabrication of dental nanocomposites.

Nearly monodispersed silica nanoparticles having a controlled size from 5 to 450 nm were synthesized via a sol-gel process, and then the optimum conditions for the surface treatment of the synthesized silica nanoparticles with a silane coupling agent (i.e., 3-methacryloxypropyltrimethoxysilane (gamma-MPS)) were explored to produce dental composites exhibiting enhanced adhesion and dispersion of silica nanoparticles in the resin matrix. The particle size was increased by increasing amounts of the catalyst (NH4OH) and silica precursor (tetraethylorthosilicate, TEOS) and by decreasing the amount of water in the reaction mixtures regardless of solvents used for the synthesis. The particle size prepared by using ethanol as a solvent was significantly larger than that prepared by using methanol as a solvent when the composition of the reaction mixture was fixed. The nanosized particles in the 5-25 nm range were aggregated. The amount of grafted gamma-MPS on the surface of the synthesized silica nanoparticles was dependent on the composition of the reaction mixture when an excess amount of gamma-MPS was used. When surface treatment was performed at optimum conditions found here, the amount of the grafted gamma-MPS per unit surface area of the silica nanoparticles was nearly the same regardless of the particle size. Dispersion of the silica particles in the resin matrix and interfacial adhesion between silica particles and resin matrix were enhanced when surface treated silica nanoparticles were used for preparing dental nanocomposites.

Dental Materials↗