PubMed · 7025871
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
R A Carse, N Duthie. 1981-11-03. Temporary bridge construction: A laboratory technique.. https://doi.org/10.1038/sj.bdj.4804692
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
STATEMENT OF PROBLEM: Limiting abutment-to-implant hexagonal discrepancies and rotational movement of the abutment around the implant to less than 5 degrees would result in a more stable screw joint. However, the exact relationship after abutment screw tightening is unknown, as is the effect of a counter-torque device in limiting abutment movement during screw tightening. PURPOSE: This study examined the orientation of the abutment hexagon to the implant hexagon after tightening of the abutment screw for several abutment systems with and without the use of a counter-torque device. MATERIAL AND METHODS: Thirty conical self-tapping implants (3.75 x 10.0 mm) and 10 wide-platform Brånemark System implants (5.0 x 10.0 mm), along with 10 abutment specimens from the CeraOne, Estheticone, Procera, and AuraAdapt systems, were selected for this investigation. The implants were placed in a holding device prior to tightening of the abutments. When the tightening torque recommended for each abutment system was reached with the use of a torque controller, each implant abutment specimen was removed from the holding device and embedded in a hard resin medium. The specimens were sectioned in a horizontal direction at the level of the hexagons and cleansed of debris prior to examination. The hexagon orientations were assessed as the degree and direction of rotation of the abutment hexagon around the implant hexagon. RESULTS: The range of the maximum degrees of rotation for all 4 abutment groups tightened with or without the counter-torque device was slightly more than 3.53 degrees. The absolute degrees of rotation for all 4 abutment groups were less than 1.50 degrees with or without the use of the counter-torque device. CONCLUSION: The hexagon-to-hexagon orientation measured as rotational fit on all abutment systems was below the 5 degrees suggested as optimal for screw joint stability. The absolute degrees of rotation for all 4 abutment groups were less than 1.50 degrees regardless of whether the counter-torque device was used.
This article explains the mechanism of indirect retention for RPDs and discusses the factors which determine its effectiveness. Examples are given of designs which incorporate indirect retention.
A variety of terms have been used to describe changes in the oral mucosa around abutments underneath fixed and removable implant prostheses such as mucosal inflammation, peri-implant mucosal hyperplasia, gingival hyperplasia, hyperplastic tissue, mucosal proliferation, proliferative gingivitis and peri-implant mucositis. Although such terms have become part of the evidence-based literature, there is no histological evidence to support the descriptive terminology used by authors. The use of the alternative term mucosal enlargement for clinical observations underneath mandibular implant overdentures is proposed. Prospective and retrospective reports have failed to use similar criteria to measure periodontal parameters in relation to these mucosal changes, both in keratinized or non-keratinized tissues. Therapeutic remedies for mucosal enlargement are dictated by authors' opinions on the possible aetiology. This literature review, coupled with clinical observations during a 5-year prospective study, prompts this proposal of the term mucosal enlargement underneath splinted and unsplinted mandibular implant overdentures.