PubMed · 7466585
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
R A Ersek. 1981. Mesenteric transillumination for vascular visualization.. https://pubmed.ncbi.nlm.nih.gov/7466585/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A continuous chemically sensitive optical fiber is used with optical time-of-flight chemical detection (OTOF-CD) for spatially resolved analyte mapping. To enhance signal levels and to improve their reproducibility, two novel principles for signal generation and processing are introduced. In the first, the fluorescene of an analyte-insensitive fluorophore is monitored as a function of the evanescent wave absorption of an analyte-sensitive indicator. The resulting signal levels are well above those encountered in optical time domain reflectometry methods that rely upon backscattering for spatially resolved detection. As a result, the method could significantly expand the range of species that can be detected with absorption reagents used in OTOF sensors. The second method raises signal-to-noise ratios by 3-4.5-fold for measurements made at the far ends of the sensing fiber. It functions by sending probe laser pulses into and monitoring their return sequentially from both ends of the sensing fiber. Because the two pulses provide complementary information, only the first half of each of the collected waveforms is used for analyte quantitation. The introduced concepts were experimentally verified with a distributed sensor constructed from a 40-m-long continuous chemically sensitive optical fiber. This sensing element was produced by immobilization of an ammonia-sensitive absorbing reagent (phenol red) and an analyte-insensitive fluorophore (rhodamine 640) into the original silicone cladding of the plastic-clad silica fiber.
Discoloring of glass due to ionizing radiation depends on the absorbed dose. The radiation-induced light attenuation in optical fibers may be used as a measure of the dose. In high-energy photon beams (6 MV X rays), a lead-doped silica fiber can be calibrated. A dosimeter based on an optical fiber was developed for applications in radiation therapy. The diameter of the mounted fiber is 0.25 mm, whereas the length depends on the sensitivity required. To demonstrate the applicability, a customized fiber device was used to determine scattered radiation close to the lens of the eye. Measurements were compared with TLDs (LiF) in an anthropomorphic phantom. The comparison with TLD measurements shows good agreement. In contrast to TLD, optical fibers provide immediate dose values, and the readout procedure is much easier. Owing to its small size and diameter, interesting invasive dose measurements are feasible.
Explore the source record for details and available documents.