PubMed Health⌕ Search

PubMed · 7473871

Implant isotopy (II).

Abstract

Because nature has given humans from 14 to 16 teeth per arch, the author maintains that an implantologist ought to replace each missing tooth with an implant and calls this philosophical creed "implant isotopy". Three different prosthetic solutions are suggested for the cases of either complete or partially edentulous arches, where from 12 to 14 abutments are emerging from the gingiva. The first type consists of parallel protruding posts. The second type is a modification of the first method through the connection of all the posts (although they are not perfectly parallel) via a titanium wire-drawn bar to be welded via endoral welding. Finally, the third type consists of a laboratory cast titanium denture composed of different sections that can be connected to one another and to the implant abutments via endoral welding.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G Muratori. 1995. Implant isotopy (II).. https://pubmed.ncbi.nlm.nih.gov/7473871/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Fabrication of custom clips for bar-and-clip attachments for implant-supported overdentures.

Bar-and-clip attachments for dental implants are a common and versatile device for improving the retention and stability of a removable prosthesis. Manufactured clips may be unsubstantial and may not always fit or provide the desired amount of retention for the bar. The purpose of this article is to describe a technique for custom fabrication of clip attachments. The wax pattern of the clips is fabricated and then cast in dental gold alloy. The gold clips are then cut to an appropriate size that will allow for a variety of clinical applications.

Dental Casting Technique↗

[Effects of laser welding on bond of porcelain fused cast pure titanium].

OBJECTIVE: To investigate the influence of the laser welding on bond of porcelain fused to cast pure titanium. METHODS: Twenty cast titanium plates were divided into two groups: laser welded group and control group. The low-fusing porcelain was fused to the laser welded cast pure titanium plates at fusion zone. The bond strength of the porcelain to laser welded cast pure titanium was measured by the three-point bending test. The interface of titanium and porcelain was investigated by scanning electron microscopy (SEM) and energy depressive X-ray detector (EDX). The non-welded titanium plates were used as comparison. RESULTS: No significant difference of the bond strength was found between laser-welded samples [(46.85 +/- 0.76) MPa] and the controls [(41.71 +/- 0.55) MPa] (P > 0.05). The SEM displayed the interface presented similar irregularities with a predominance. The titanium diffused to low-fusing porcelain, while silicon and aluminum diffused to titanium basement. CONCLUSIONS: Laser welding does not affect low-fusing porcelain fused to pure titanium.

Dental Casting Technique↗