PubMed · 7917588
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
C Logan. 1994-09-10. A poor performance.. https://doi.org/10.1038/sj.bdj.4808531
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
Dental aspirator kits are equipped with amalgam separators, which eliminate the particulate matter from the effluent. When the aspirator kits are disinfected, the disinfectant solution is in contact with the separated amalgams over night and over the weekend. Oxidizing components of the disinfectants dissolve mercury from the separated amalgam. The dissolved mercury is released into the environment along with the effluent on the beginning of the following workday. The degree of mercury remobilization depends on the amount and oxidizing power of the disinfectant components. The mercury concentrations measured in the effluent of the aspirator kits after the application of seven different disinfectants were 18.4 micrograms/l-1396 micrograms/l. The emission of mercury by dental aspirator kits is lowered substantially by using disinfectants which contain no oxidizing substances. Disinfecting of dental aspirator kits for hygienic reasons is not necessary. Therefore we propose only cleaning rather than disinfecting dental aspirator kits.
The effect of palladium addition on the microstructure, compressive strength, creep rate and mercury release rate of Ag2Hg3 (gamma 1) phase was evaluated. Experimental results indicated that fairly pure gamma 1 phase could be fabricated using the present trituration method. The heat treatment of gamma 1 at 90 degrees C increased porosity level, increased dimensional shrinkage, increased mercury vapour release and enhanced the formation of beta1 phase. Addition of palladium in gamma 1 slowed down the amalgamation reaction, largely suppressed the phase transition to beta1 and caused a slight shift in open circuit potential toward the anodic direction. Although the overall anodic polarization profiles did not show a significant effect of palladium, scanning electron microscopy revealed morphological differences between pure and palladium-containing gamma 1. Addition of palladium in gamma 1 also increased compressive strength, increased creep resistance, and largely reduced both mercury vapour and ion release rates. Considering overall performance, the optimal palladium content in gamma 1 seems to be in the range between 0.50 and 0.75 wt%.