PubMed HealthSearch

PubMed · 8558383

Multiple emulsion-based systems carrying insulin: development and characterization.

Abstract

An insulin delivery system based on liquid surfactant membranes has been developed. The formulation was based on a w/o/w emulsion where an organic membrane separated two aqueous phases and the internal aqueous phase contained insulin. Sesame and cotton seed oils were used as organic membranes. In order to facilitate the transportation of glucose across the organic membrane various additives such as calcium stearate, lecithin, cholesterol, hexamine, stearic acid and glyceryl tristearate were used. The additives were found to be successful carriers for the transportation of glucose to the internal aqueous phase. Similarly, viscosity enhancers, e.g. cetostearyl alcohol, in the organic phase enhanced the immobilization of insulin. Various parameters affecting the stability of the emulsions were established. The developed system was characterized for insulin activity and insulin efflux profile.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S Singh, R Singh, S P Vyas. Multiple emulsion-based systems carrying insulin: development and characterization.. https://doi.org/10.3109/02652049509006791

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Mechanical test methods for biomedical membranes.

It is important to estimate the mechanical characteristics and strength of biomedical membrane. For this purpose, previously we have proposed several mechanical test methods for biomedical membranes. To establish the safety design for biomedical membrane, such as cellophane membrane for hemodialysis, it is important to estimate the viscoelastic characteristics of these materials. On the other hand, artificial biomedical membrane such as tympanic membrane, are subjected to noncontact internal air pressure under the membranous state. To estimate mechanical characteristics of such membrane, it is necessary to develop a well-simulated test under the gaseous pressure and the other mechanical test under the membranous state. In this paper, several test methods for these purposes were shown. Furthermore, results obtained by these methods were shown and related to clinical problems. These proposed test methods are quite different from the axial tensile test. But they are also important to estimate the mechanical property of biomedical membrane. Each result obtained by these test methods has its own significance. By selection of the most suitable test method for each purpose and revealing these mutual relations, safety design of artificial organs can be performed from the viewpoint of the strength.

Cellophane

[Comparative study on the effectiveness of modified Kato's cellophane thick smear and Stoll's dilution egg counting technique for quantitative fecal examination of helminth eggs].

A total of 197 fecal specimens was prepared for quantitative examination of helminth eggs by modified Kato's cellophane thick smear (M.C.T.S.) and Stoll's dilution egg counting technique (D.E.C.T.). The comparative effectiveness of two techniques was evaluated and conversion function was deduced. The average time required for the microscopic examination on one slide by M.C.T.S. was 12.6 minutes and that of D.E.C.T. was 14.6 minutes. M.C.T.S. showed lower false negative rate than D.E.C.T. in light worm burden cases. Functions to convert the counts obtained by M.C.T.S. to E.P.G. by Stoll's dilution egg counting technique were 47.86 x 10(0.87) logM.C.T.S. in A. lumbricoides, 41.69 x 10(0.82) logM.C.T.S. in T. trichiura and 63.10 x 10(0.85) logM.C.T.S. in C. sinensis. It was suggested M.C.T.S. be better than D.E.C.T. for the quantitative examination of intestinal helminthiases such as A. lumbricoides, T. trichiura, and C. sinensis infections even in the cases with low worm burden.

Cellophane