PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 894493

Parameter for assessing parenteral cleanliness based on particle-size distributions.

J Blanchard·J A Schwartz·D M Byrne
View original source ↗Export metadata ↓

Abstract

A new parameter for assessing the particulate matter content of large-volume parenteral solutions was developed and tested. Some problems and shortcomings associated with previously proposed standards are discussed, together with the potential advantages of employing the proposed parameter. Cleanliness factors were compared with another parameter and were less susceptible to changes resulting from the method of measurement utilized and the premeasurement conditions encountered by the solution. The use of these cleanliness factors in conjunction with an automatic particle counter is proposed as a worthwhile supplement to the USP-NF standard for monitoring the quality of large-volume parenteral solutions.

Explore related subjects

Drug CompoundingDrug ContaminationInfusions, ParenteralParticle SizePharmacopoeias as TopicSolutionsJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J Blanchard, J A Schwartz, D M Byrne. 1977. Parameter for assessing parenteral cleanliness based on particle-size distributions.. https://doi.org/10.1002/jps.2600660808

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

A correction factor for bridging compaction simulator and different roller compactors.

Roller compaction (RC) is an important dry granulation technique. Since pilot and commercial scale roller compactors, which operate continuously on a large scale, usually require kilograms of material per run, formulation and process development directly on such roller compactors is not practical. In contrast, a compaction simulator (CS) can produce ribblets, also known as "slugs", using only a few grams of material with sinusoidal displacement profile replicating the motion of a specific point on the roll surface. Thus, it is possible to develop RC formulation and process in laboratory using a CS-based material-sparing approach. However, because of the inherently different configurations for applying pressure between die compression and roll compression, translating uniaxial pressure from CS experiments to roll pressure during RC is often unreliable, leading to significant uncertainties in the critical quality attributes of ribbons, such as ribbon solid fraction (or porosity) and mechanical strength. The objective of this study was to identify a correction factor (Kp = uniaxial die compression pressure/roll pressure), by correlating the compressibility profiles from CS and a roller compactor of interest, to enable more reliable process translation from CS to roller compactor. In this study, a Kp value of 0.5 was determined for Alexanderwerk WP120 and validated for Gerteis Mini-Pactor and Bepex Pharmapactor. This value may serve as a starting point for translating the optimal compaction pressure identified based on CS investigation to common roller compactors, requiring only minor adjustments to attain optimal RC process parameters (i.e., roll force and roll gap) for a chosen roller compactor.

Drug Compounding↗
PubMed2006

Establishing a stability window for medium- and long-chain-triglyceride lipid-based total nutrient admixtures using USP standards.

PURPOSE: The stability window of medium-chain triglyceride (MCT) and long-chain-triglyceride (LCT) lipid-based total nutrient admixtures (TNAs) was studied. METHODS: Sixteen different admixtures were selected for study. Of these, eight base macronutrient concentrations representing low and high concentrations were selected, along with low and high concentrations of electrolytes. All TNAs studied contained 2 mg of elemental iron as part of the trace-element formulation, an amount previously shown to produce unstable TNAs with pure LCT-based lipid injectable emulsions. All admixtures were prepared in triplicate and analyzed over five time intervals: time 1 (immediately after preparation), time 2 (after four days of storage at 6 +/- 2 degrees C), and times 3, 4, and 5, corresponding to 6, 24, and 30 hours of storage at 25 +/- 2 degrees C, respectively, after time 2. Stability was measured by comparing results with USP standards for fat globule size in lipid injectable emulsions. RESULTS: A total of 48 admixtures were studied. Samples at each time interval showed an inconsistent but general increase in the number of globules with a diameter of >1.8 microm over time. All admixtures met both the proposed pharmacopoeial criteria for stability with respect to mean droplet size and volume-weighted proportion of fat globules with a diameter of >5 microm. CONCLUSION: A wide range of macronutrients and micronutrients were tested in a series of MCT-LCT-based TNAs and found to be stable. The use of MCTs and LCTs in lipid injectable emulsions confers greater stability to TNAs than has been achieved with pure LCT-based formulations.

Drug Compounding↗