PubMed · 8969770
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M Armstrong, P L Efros. 1996. Speaking tubes for bedside use.. https://doi.org/10.1016/s0194-5998(96)70020-7
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Integrated circuits (ICs) containing cross-point switch arrays were applied to create analog input selector switch devices for multi-channel electrophysiological experiments. The described analog input selector switch devices make it possible to connect to the main amplifier's inputs those microelectrode and preamplifier output wires that yield unit discharges of acceptable shape and amplitude, or yield other kind of acceptable electrophysiological signals (EEG, EP). This kind of selector allows to use higher number of preamplifier channels and to ignore the input channels without adequate signals or the channels with noisy inputs. No manual switching is required, as the work is done by computer controlled switches. The switch positions can be saved and reloaded at the next experimental session through an I/O port (e.g. the parallel port) of the computer.
A biopotential amplifier for single supply operation is presented. It uses a Driven Right Leg Circuit (DRL) to drive the patient's body to a DC common mode voltage, centering biopotential signals with respect to the amplifier's input voltage range. This scheme ensures proper range operation when a single power supply is used. The circuit described is especially suited for low consumption, battery-powered applications, requiring a single battery and avoiding switching voltage inverters to achieve dual supplies. The generic circuit is described and, as an example, a biopotential amplifier with a gain of 60 dB and a DC input range of +/-200 mV was implemented using low power operational amplifiers. A Common Mode Rejection Ratio (CMRR) of 126 dB at 50 Hz was achieved without trimming.
Panel speakers are investigated in terms of structural vibration and acoustic radiation. A panel speaker primarily consists of a panel and an inertia exciter. Contrary to conventional speakers, flexural resonance is encouraged such that the panel vibrates as randomly as possible. Simulation tools are developed to facilitate system integration of panel speakers. In particular, electro-mechanical analogy, finite element analysis, and fast Fourier transform are employed to predict panel vibration and the acoustic radiation. Design procedures are also summarized. In order to compare the panel speakers with the conventional speakers, experimental investigations were undertaken to evaluate frequency response, directional response, sensitivity, efficiency, and harmonic distortion of both speakers. The results revealed that the panel speakers suffered from a problem of sensitivity and efficiency. To alleviate the problem, a woofer using electronic compensation based on H2 model matching principle is utilized to supplement the bass response. As indicated in the result, significant improvement over the panel speaker alone was achieved by using the combined panel-woofer system.