Theory and computer programs for calculating solution pH, buffer formula, and buffer capacity for multiple component system at a given ionic strength and temperature.

H Okamoto; K Mori; K Ohtsuka; H Ohuchi; H Ishii

doi:10.1023/a:1012037819211

Home/Archive/PubMed

PubMed · 9098870

Theory and computer programs for calculating solution pH, buffer formula, and buffer capacity for multiple component system at a given ionic strength and temperature.

H Okamoto·K Mori·K Ohtsuka·H Ohuchi·H Ishii

View original source ↗Export metadata ↓

Abstract

PURPOSE: A theory and computer programs running on Microsoft Excel for Windows for calculation of solution pH, buffer formula, and buffer capacity at a given ionic strength and temperature were developed. The theory does not limit the category of buffer components, the number of buffer components, or the number of ionizations for each buffer component. The usefulness of the programs was examined. METHODS: The formulas for 7 single component buffer solutions and 2 multiple component buffer solutions composed of citrate, phosphate, Tris, borate, and glycine were calculated. The solution pH values were measured at 25, 40, 55 and 70 degrees C for comparison with the calculated pH values. RESULTS: Of the 108 predictions made, 96 were of pH values with +/- 0.1 pH unit of the measured values, at temperatures ranging from 25 degrees C to 70 degrees C and at ionic strengths ranging from 0.1 M to 0.5 M. CONCLUSIONS: These programs will be useful for identifying appropriate buffer solutions at various temperatures and/or ionic strengths.

Explore related subjects

Buffers Hydrogen-Ion Concentration Kinetics Models, Chemical Osmolar Concentration Software Temperature Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

H Okamoto, K Mori, K Ohtsuka, H Ohuchi, H Ishii. 1997. Theory and computer programs for calculating solution pH, buffer formula, and buffer capacity for multiple component system at a given ionic strength and temperature.. https://doi.org/10.1023/a%3A1012037819211

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2000

Trace-level determination of triazines and several degradation products in environmental waters by disk solid-phase extraction and micellar electrokinetic chromatography.

An analytical method combining disk solid-phase extraction with micellar electrokinetic chromatography has been developed for the determination of atrazine, simazine, hydroxyatrazine, deisopropylatrazine, deethylatrazine, propazine and prometryn in water samples. The influence of the buffer and sodium dodecyl sulfate (SDS) concentration, pH and organic modifier on the separation has been studied. Baseline separation of the seven triazines was achieved under the following conditions: 10 mM borate buffer, 60 mM SDS, 20% methanol and pH 9.2. C18-bonded silica and poly(styrene-divinylbenzene) (PS-DVB) disks were evaluated for solid-phase extraction of the selected pesticides (11 of water sample). Using two PS-DVB disks, quantitative recoveries were obtained for all pesticides tested. The method was successfully applied for the determination of the seven triazines in drinking and well water at the 0.1 microg l(-1) and 0.5 microg l(-1) concentration levels, respectively. The detection limits for these analytes using the proposed analytical method were within the 0.02-0.06 microg l(-1) range in drinking water and the 0.06-0.30 microg l(-1) range in well water.

Buffers↗

PubMed2000

Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography.

A group of phenolic compounds including phenolic aldehydes, acids and flavonoids are separated by micellar electrokinetic chromatography (MECC). The influence of buffer (concentration and pH), concentration of sodium dodecylsulphate (SDS) and applied voltage were studied. To increase the selectivity of the separation and the resolution of the solutes organic solvents are added to the separation buffer, the best results were obtained when methanol was used at lower percentages. An optimized buffer (150 mM boric acid (pH 8.5)-50 mM SDS-5% methanol) provides the optimum separation with regard to resolution and migration time. This method was applied to the determination of these compounds in wine samples with good results.

Buffers↗

PubMed2000

Cys-93-betabeta-succinimidophenyl polyethylene glycol 2000 hemoglobin A. Intramolecular cross-bridging of hemoglobin outside the central cavity.

Bis(maleidophenyl)-PEG2000 (Bis-Mal-PEG2000), a new bifunctional protein cross-linker targeted to sulfhydryl groups, introduces intra-tetrameric cross-links into oxy-HbA in nearly quantitative yields. Structural as well as crystallographic analyses of the cross-linked species, Bis-Mal-PEG2000 HbA, identified Cys-93(beta) as the site of intramolecular cross-linking. The cross-bridging had only a limited influence on the O(2) affinity and cooperativity of HbA in 50 mM BisTris acetate, pH 7.4. However, the Bohr effect was reduced by approximately 60%. Bis-Mal-PEG2000 HbA retained sensitivity to the presence of allosteric effectors 2, 3-diphosphoglycerate, IHP, and chloride, albeit to a lesser degree compared with HbA. Crystallographic analysis revealed the overall structure of deoxy-Bis-Mal-PEG2000 HbA to be similar to deoxy-HbA but for the loss of the salt bridge between Asp-94(beta) and His-146(beta). The large influence of the cross-bridging on the alkaline Bohr effect of HbA is consistent with the loss of this salt bridge. Unlike the "central cavity cross-bridges" described previously, the cross-link introduced by Bis-Mal-PEG2000 into HbA is an "outside the central cavity cross-bridge." In view of its oxy-conformational specificity and limited influence on O(2) affinity, this new cross-linking strategy holds promise for the stabilization of new designer low O(2) affinity Hbs generated by recombinant DNA technology for applications as Hb based therapeutics.

Buffers↗