PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9184850

Basic strategies for valid cytometry using image analysis.

A Jonker·W J Geerts·P Chieco·A F Moorman·W H Lamers·C J Van Noorden
View original source ↗Export metadata ↓

Abstract

The present review provides a starting point for setting up an image analysis system for quantitative densitometry and absorbance or fluorescence measurements in cell preparations, tissue sections or gels. Guidelines for instrumental settings that are essential for the valid application of image analysis in cytophotometry and cytofluorometry are described. The general principles of the working mechanism of CCD cameras in combination with general methods to improve the behaviour of the cameras are presented. Optimization of illumination of microscopical and macroscopical objects receives special attention because of its importance for valid cytometry. Sources of errors in quantitative measurements are listed and step-by-step charts for tuning the CCD camera, frame grabber and illumination for the optimal use of the systems are described. Suggestions are given for improvement of image arithmetic in difficult imaging situations, such as low fluorescence signals and high absorbance signals.

Explore related subjects

AbsorptionCell SeparationCellsCytophotometryDensitometryFlow CytometryGelsImage CytometryImage Processing, Computer-AssistedMicroscopy, FluorescenceReproducibility of ResultsJournal ArticleReview

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A Jonker, W J Geerts, P Chieco, A F Moorman, W H Lamers, C J Van Noorden. 1997. Basic strategies for valid cytometry using image analysis.. https://doi.org/10.1023/a%3A1026434816947

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2000

Carbon dioxide uptake efficiency by outdoor microalgal cultures in tubular airlift photobioreactors.

The influence of solar irradiance and carbon dioxide molar fraction of injected CO(2)-air mixtures on the behavior of outdoor continuous cultures of the microalga Phaeodactylum tricornutum in tubular airlift photobioreactors was analyzed. Instantaneous solar irradiance, pH, dissolved oxygen, temperature, biomass concentration, and the mass flow rates of both the inlet and outlet oxygen and carbon with both the liquid and gas phases were measured. In addition, elemental analysis of the biomass and the cell-free culture medium was performed. The oxygen production rate and carbon dioxide consumption rate increased hyperbolically with the incident solar irradiance on the reactor surface. Carbon losses showed a negative correlation with the daily variation of the carbon dioxide consumption rate. The maximum CO(2) uptake efficiency was 63% of the CO(2) supplied when the CO(2) concentration in the gas supplied was 60% v/v. Carbon losses were >100% during the night, due to CO(2) production by respiration, and hyperbolically decreased to values of 10% to 20% in the midday hours. An increase in the carbon fixed in the biomass with the solar cycle was observed. A slight daily decrease of carbon content of the cell-free culture medium indicated the existence of carbon accumulation in the culture. A decrease in CO(2) molar fraction in the injected gas had a double benefit: first, the biomass productivity of the system was enhanced from 2.05 to 2.47 g L(-1) day(-1) by reduction of CO(2) inhibition and/or pH gradients; and second, the carbon losses during the daylight period were reduced by 60%. The fluid dynamics in the reactor also influenced the carbon losses: the higher the liquid flow rate the higher the carbon losses. By using a previous mass transfer model the experimental results were simulated and the usefulness of this method in the evaluation and scale-up of tubular photobioreactors was established.

Absorption↗
PubMed2000

Bioabsorbable polymer scaffolds for tissue engineering capable of sustained growth factor delivery.

Engineering new tissues utilizing cell transplantation on biodegradable polymer matrices is an attractive approach to treat patients suffering from the loss or dysfunction of a number of tissues and organs. The matrices must maintain structural integrity during the process of tissue formation, and promote the vascularization of the developing tissue. A number of molecules (angiogenic factors) have been identified that promote the formation of new vascular beds from endothelial cells present within tissues, and the localized, controlled delivery of these factors from a matrix may allow an enhanced vascularization of engineered tissues. We have developed a gas foaming polymer processing approach that allows the fabrication of three-dimensional porous matrices from bioabsorbable materials (e.g., copolymers of lactide and glycolide [PLG]) without the use of organic solvents or high temperatures. The effects of several processing parameters (e.g., gas type, polymer composition and molecular weight) on the process were studied. Several gases (CO(2), N(2), He) were utilized in the fabrication process, but only CO(2) resulted in the formation of highly porous, structurally intact matrices. Crystalline polymers (polylactide and polyglycolide) did not form porous matrices, while amorphous copolymers (50:50, 75:25, and 85:15 ratio of lactide:glycolide) foamed to yield matrices with porosity up to 95%. The mechanical properties of matrices were also regulated by the choice of PLG composition and molecular weight. Angiogenic factors (e.g., vascular endothelial growth factor) were subsequently incorporated into matrices during the fabrication process, and released in a controlled manner. Importantly, the released growth factor retains over 90% of its bioactivity. In summary, a promising system for the incorporation and delivery of angiogenic factors from three-dimensional, biodegradable polymer matrices has been developed, and the fabrication process allows incorporation under mild conditions.

Absorption↗
PubMed2000

A mechanistic analysis of carrier-mediated oral delivery of protein therapeutics.

This article summarizes the results of a theoretical analysis of protein absorption into the systemic circulation from the small intestine, with and without molecular 'carriers' designed to enhance absorption. The predictions are compared with experimental systemic protein concentrations following intraduodenal delivery of insulin, interferon alpha-2b, and human growth hormone. The results show that, from the standpoint of improving oral absorption, the primary consequence of carrier molecules is to increase epithelial membrane permeability, thereby leading to higher bioavailability. Several possible mechanisms of this permeability enhancement are discussed.

Absorption↗