PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9212938

Flow visualization studies to improve the spiral pump design.

A Andrade·J Biscegli·J E Sousa·Y Ohashi·Y Nosé
View original source ↗Export metadata ↓

Abstract

The spiral pump (SP) uses centrifugal and axial pumping principles simultaneously, through a conical shaped impeller with threads in its surface. Flow visualization studies were performed in critical areas of the SP. A closed circuit loop was filled with glycerin-water solution (40%). Amberlite particles (80 mesh) were illuminated by a planar helium-neon laser light (7 mW). The particle velocities were recorded with Kodak (TMAX-400) black and white film, and the flow behavior was studied with a micro video camera and color video printer. The flow visualization studies showed no turbulence or stagnant areas in the inlet and outlet ports of the SP. When using the impeller with one lead, at the top of the threads some recirculation appeared when the total pressure head increased. Two new impellers were made. One of them had the same conical shape with a thread having 2 leads. The second had a thread with 2 leads, but it also had a bigger cone angle. These modifications improved the pump hydrodynamic performance, decreasing the recirculation in pumping conditions that require pressures over 200 mm Hg.

Explore related subjects

CentrifugationGlycerolHeart-Assist DevicesHeliumLaser-Doppler FlowmetryNeonParticle SizeQuality ControlResins, SyntheticVideo RecordingWaterComparative StudyJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A Andrade, J Biscegli, J E Sousa, Y Ohashi, Y Nosé. 1997. Flow visualization studies to improve the spiral pump design.. https://doi.org/10.1111/j.1525-1594.1997.tb03722.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Comparison of sampling techniques for parallel analysis of transcript and metabolite levels in Saccharomyces cerevisiae.

Mathematical modelling of cellular processes is crucial for the understanding of the cell or organism as a whole. Genome-wide observations, at the levels of the transcriptome, proteome and metabolome, provide a high coverage of the molecular constituents of the system in study. Time-course experiments are important for gaining insight into a system's dynamics and are needed for mathematical modelling. In time-course experiments it is crucial to use efficient and fast sampling techniques. We evaluated several techniques to sample and process yeast cultures for parallel analysis of the transcriptome and metabolome. The evaluation was made by measuring the quality of the RNA obtained with UV-spectroscopy, capillary electrophoresis and microarray hybridization. The protocol developed involves rapid collection by spraying the sample into -40 degrees C tricine-buffered methanol (as previously described for yeast metabolome analysis), followed by the separation of cells from the culture medium in low-temperature rapid centrifugation. Removal of the residual methanol is carried out by freeze-drying the pellet at -35 degrees C. RNA and metabolites can then be extracted from the same freeze-dried sample obtained with this procedure.

Centrifugation↗
PubMed2007

Preliminary investigations on the standardisation and quality control for the determination of gamma-glutamyltranspeptidase activity in seminal plasma.

The present study was designed to assess the effects of centrifugation velocity, standing time after dilution, freezing-thawing and chymotrypsin on the determination of gamma-glutamyltranspeptidase (gamma-GT) activities in seminal plasma, and to establish an instruction for the standardisation and quality control for the determination of gamma-GT within the same laboratory and among different laboratories. The gamma-GT level and sperm concentration of each of 72 samples of seminal plasma obtained by centrifugation at 1000 g for 10 min or 3000 g for 15 min were assayed. In addition, gamma-GT activities in diluted seminal plasma with different standing time and in samples with or without chymotrypsin were measured. The results showed that there was a significant difference of gamma-GT levels in seminal plasma obtained by centrifugation at different velocities (P < 0.001), and that gamma-GT activities in seminal plasma measured after standing for 30 min after dilution were notably lower than those measured immediately after dilution (P < 0.001). However, the data indicated that both chymotrypsin and freezing-thawing had no apparent effect on the determination of seminal gamma-GT. In conclusion, standing time after dilution and centrifugation velocity should be standardised, and frozen seminal plasma could serve as quality control products for the determination of gamma-GT activity among different laboratories.

Centrifugation↗
PubMed2006

Increases in fecal coliform bacteria resulting from centrifugal dewatering of digested biosolids.

In many countries, the classification of biosolids for disposal purposes can be based, in part, on fecal coliform levels, with alternative criteria also available based on the stabilization process used, such as anaerobic digestion. The assumption that these alternative criteria provide equivalent protection may be flawed. This paper demonstrates that fecal coliform levels determined after digestion do not always indicate the bacterial levels after the same biosolids have been dewatered by centrifugation. In samples from mesophilic digestion, half had significant increases in coliform numbers (P<0.05) with up to one order of magnitude increase during centrifugation, suggesting coliform regrowth. Thermophilically digested samples had significant increases of several orders of magnitude during dewatering, more likely from reactivation of viable but non-culturable coliforms than from regrowth. In other cases, centrifugation induced coliform regrowth or reactivation upon incubation and storage of dewatered samples, but not digested samples. These 2-3 order of magnitude increases occurred with both 25 and 37 degrees C incubations. Coliform increases continued for up to 5 days, then gradually declined. However, by day 20 coliform numbers were still 2 orders of magnitude greater than when originally sampled. The magnitude of the increases could be due either to regrowth or reactivation, but the nature of the longer-term increases--also seen in biosolids/soil mixtures--suggests regrowth. Differences in numbers between digested and dewatered samples could not be duplicated with high shear processing in lab-scale devices, with nitrogen purging to remove volatile or gaseous constituents, or with redilution using centrate. They could not be attributed to enumeration methods, to interference of Bacillus spp. on apparent coliform counts, or to temperature changes. The increases have practical implications in the use of fecal coliform or alternative criteria to define pathogen content in biosolids.

Centrifugation↗