PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9300108

Coil optimization for magnetic brain stimulation.

J Ruohonen·J Virtanen·R J Ilmoniemi
View original source ↗Export metadata ↓

Abstract

Further development of magnetic brain stimulation requires smaller coils, smaller power consumption, and less coil heating. This study addresses the optimization of the complete stimulator and in particular the coil. We describe the coil structure in terms of simple mathematical functions and examine the influence of changes in the structure on several figures of merit. A few optimal coil geometries suitable for repetitive brain stimulation are depicted. It is demonstrated that today's coils are far from optimal and that, for instance, the power consumption can be reduced remarkably from the level of today's equipment. Improvements may act as a springboard toward new applications.

Explore related subjects

Biomedical EngineeringBrainElectronics, MedicalEquipment DesignEvaluation Studies as TopicHumansMagneticsModels, TheoreticalJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J Ruohonen, J Virtanen, R J Ilmoniemi. Coil optimization for magnetic brain stimulation.. https://doi.org/10.1007/bf02684168

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗