PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9352059

Modified polyacrylamide microspheres as immunosorbent.

B Panikkar·P R Hari·C P Sharma
View original source ↗Export metadata ↓

Abstract

Extracorporeal immunoadsorption system has been used for the specific removal of immunologically active substances from the blood. In this study, an attempt is made to utilise polyacrylamide microspheres as a matrix for immunoadsorption. Phenyl alanine is coupled onto the polymer beads using glutaraldehyde. These modified beads exhibit a high binding affinity for gamma-globulin compared to bare beads. The surface modified ones showed selective adsorption of immunoglobulins of IgG class. The C3 adsorption pattern is not altered significantly upon modification. Modified beads are found to be less hemolytic after modification. However, more studies are to be conducted for the development of a hemoperfusion column based on this modified matrix.

Explore related subjects

Acrylic ResinsAnimalsCattleChromatography, AffinityCross-Linking ReagentsElectrophoresis, Polyacrylamide GelHumansImmunosorbent TechniquesImmunosorbentsMicrospheresPerfusionPolyacrylamidesJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B Panikkar, P R Hari, C P Sharma. 1997. Modified polyacrylamide microspheres as immunosorbent.. https://doi.org/10.3109/10731199709117451

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed1999

Entropic trapping of macromolecules by mesoscopic periodic voids in a polymer hydrogel.

The separation of macromolecules such as polymers and DNA by means of electrophoresis, gel permeation chromatography or filtration exploits size-dependent differences in the time it takes for the molecules to migrate through a random porous network. Transport through the gel matrices, which usually consist of full swollen crosslinked polymers, depends on the relative size of the macromolecule compared with the pore radius. Sufficiently small molecules are thought to adopt an approximately spherical conformation when diffusing through the gel matrix, whereas larger ones are forced to migrate in a snake-like fashion. Molecules of intermediate size, however, can get temporarily trapped in the largest pores of the matrix, where the molecule can extend and thus maximize its conformational entropy. This 'entropic trapping' is thought to increase the dependence of diffusion rate on molecular size. Here we report the direct experimental verification of this phenomenon. Bragg diffraction from a hydrogel containing a periodic array of monodisperse water voids confirms that polymers of different weights partition between the hydrogel matrix and the water voids according to the predictions of the entropic trapping theory. Our approach might also lead to the design of improved separation media based on entropic trapping.

Acrylic Resins↗
PubMed1999

Disinfection of denture base acrylic resin.

STATEMENT OF PROBLEM: During repair or adjustments of acrylic resin removable complete and partial dentures, particles of the acrylic resin from the interior of the prosthesis may expose dental personnel to microbial health hazards if the prosthesis has not been thoroughly disinfected. PURPOSE: This study investigates the efficacy of a commercially prepared microbial disinfectant (Alcide) on the external and internal surfaces of acrylic resins. MATERIAL AND METHODS: Four groups of acrylic resin were incubated in an experimental model to simulate the oral environment over time. Specimens were treated in 2 groups, disinfected and not disinfected, and then further grouped by breaking and not breaking. Analysis was performed with microbial colony counts, SEM, and statistical analyses. RESULTS: Viable microorganisms still remain on the internal and external surfaces of treated resins. CONCLUSION: Chlorine dioxide reduces, but does not eliminate, viable microorganisms on these dental prostheses.

Acrylic Resins↗
PubMed1999

Microwave disinfection of denture base materials colonized with Candida albicans.

STATEMENT OF PROBLEM: Infection of denture materials with Candida albicans is common and contributes to denture stomatitis. PURPOSE: This 3-phase investigation examined: (1) the efficacy of microwave irradiation against C albicans colonized on 3 soft denture liners and 1 heat-polymerized denture base resin, and (2) the effect of this irradiation on the hardness of the materials tested. MATERIAL AND METHODS: In phase 1, an experimental protocol was developed. Sterilized specimens from 2 denture base soft liners and 1 heat-polymerized acrylic resin denture base material (n = 45 each) were inoculated with C albicans. Two thirds of the specimens were irradiated in a 60 Hz microwave oven for 5 minutes (dry). C albicans growth was then assessed with streaked blood agar plates and thioglycollate broth. One third of the specimens were not irradiated and served as controls. Pretest and posttest Shore A hardness values were obtained and compared. For phase 2, 15 specimens from each material group were subjected to irradiation (while immersed in water) for 5 minutes; and, 15 from each material were subjected to 10- and 15-minute irradiation (dry), with subsequent sterility and change in hardness assessments completed as described in phase 1. In phase 3, 15 specimens from each material group were subjected to repeated 5-minute irradiation cycles (while immersed in water), and changes in hardness were examined. RESULTS: Only the 5-minute irradiated specimens immersed in water were effectively sterilized, as verified by the thioglycollate assay. The effect of repeated 5-minute irradiation cycles resulted in a significant change in hardness of the PermaSoft specimens. CONCLUSIONS: Five-minute irradiation, while immersed in water, killed all C albicans present on the materials tested; and, repeated 5-minute irradiation significantly affected the hardness of only the PermaSoft material.

Acrylic Resins↗