PubMed · 9608170
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
V Ia Gel'man, E S Dmitrieva, A V Nemirovskaia. [Psychoacoustic testing using computer technology].. https://pubmed.ncbi.nlm.nih.gov/9608170/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
A belt worn controller and lithium-ion battery pack have been developed for use with the initial clinical trials of the Jarvik 2000 heart. Patient interface considerations, safety, and simplicity were major design inputs for the system. The controller was developed using all analog technology to avoid difficulties with electromagnetic interference (EMI), to minimize susceptibility to electrostatic discharge, and to avoid the need for software validation. Manual control of pump speed is accomplished by a patient operated knob, according to physician instructions for rest and exercise for each individual patient. The system includes alarms and indicators which show the following: the amount of remaining battery charge, if the battery is low and needs replacement, the power in watts being consumed, if the power consumed is above 15 W, if the pump is running below the selected speed setting, and if the pump stops. The control box, curved to be worn on the belt, is only 2.5 inches high for comfort when sitting. The battery pack, also form fitted for patient comfort, weighs just over 1 1/2 pounds and supplies 65 W-h of energy storage, sufficient to run the device for over 8 h at nominal load.
We show that neural networks with three-times continuously differentiable activation functions are capable of computing a certain family of n-bit boolean functions with two gates, whereas networks composed of binary threshold functions require at least omega(log n) gates. Thus, for a large class of activation functions, analog neural networks can be more powerful than discrete neural networks, even when computing Boolean functions.
An analogue CMOS VLSI neural processing chip has been designed and fabricated. The device employs "pulse-stream" neural state signalling and is capable of computing some 360 million synaptic connections per second. In addition to basic characterisation results, the performance of the chip in solving "real-world" problems is also demonstrated. The experience gained from the development of this device has resulted in the design of a second "pulse-stream" chip with improved performance and features. It is anticipated that this second device will be integrated into a standard bus-based system and find early application in robotic control.