PubMed Health⌕ Search

PubMed · 9689507

A new HF current generator with automatically controlled system (Endocut mode) for endoscopic sphincterotomy--preliminary experience.

Abstract

BACKGROUND AND STUDY AIMS: The main complications of endoscopic sphincterotomy are pancreatitis, hemorrhage, perforation and cholangitis. In a prospective randomized trial, a conventional current generator was compared to a new generator with an automatically controlled cut system (Endocut) for sphincterotomy. The purpose was to establish whether the new device reduces the complication rate of sphincterotomy. Our experiences over the last 2 years with the new HF current generator are described here. PATIENTS AND METHODS: In this study 100 patients were randomly assigned to one of the two generators. The following points were documented in a protocol form: abrupt or continuous cutting; length of papillotomy; complications. RESULTS: There were no significant differences in sex, age or indication for sphincterotomy. Nor were there any significant differences in the length of the sphincterotomy or mild pancreatitis. In contrast, an abrupt opening of the papillary roof was more frequently observed with the conventional generator (18 patients) than with the new device (one patient, P < 0.001). Mild bleeding occurred in two patients with the new unit, but in 13 with the conventional unit (P = 0.002). Moderate or severe bleeds were observed in neither of the two groups. During the subsequent application phase lasting for 2 years, the following complications occurred in a total number of 850 sphincterotomies (EST): pancreatitis 2.8% (one patient died); hemorrhages requiring transfusion 1% (n = 8); concealed perforations 0.3% (n = 3). CONCLUSIONS: According to our experience to date and based on this study, this new HF surgery unit enables performance of controlled, bloodless sphincterotomies. The danger of papillary hemorrhage appears to be reduced. All examiners found the new system to be safer and more convenient.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A Kohler, M Maier, C Benz, W R Martin, G Farin, J F Riemann. 1998. A new HF current generator with automatically controlled system (Endocut mode) for endoscopic sphincterotomy--preliminary experience.. https://doi.org/10.1055/s-2007-1001281

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays.

We report on the microstructure and dynamics of electron transport and recombination in dye-sensitized solar cells (DSSCs) incorporating oriented TiO2 nanotube (NT) arrays. The morphology of the NT arrays, which were prepared from electrochemically anodized Ti foils, were characterized by scanning and transmission electron microscopies. The arrays were found to consist of closely packed NTs, several micrometers in length, with typical wall thicknesses and intertube spacings of 8-10 nm and pore diameters of about 30 nm. The calcined material was fully crystalline with individual NTs consisting of about 30 nm sized crystallites. The transport and recombination properties of the NT and nanoparticle (NP) films used in DSSCs were studied by frequency-resolved modulated photocurrent/photovoltage spectroscopies. While both morphologies display comparable transport times, recombination was much slower in the NT films, indicating that the NT-based DSSCs have significantly higher charge-collection efficiencies than their NP-based counterparts. Dye molecules were shown to cover both the interior and exterior walls of the NTs. Analysis of photocurrent measurements indicates that the light-harvesting efficiencies of NT-based DSSCs were higher than those found for DSSCs incorporating NPs owing to stronger internal light-scattering effects.

Electric Power Supplies↗

Intermediate-band solar cells employing quantum dots embedded in an energy fence barrier.

Power efficiencies>60% have been predicted for idealized quantum dot (QD) intermediate band solar cells. This goal has not yet been realized, due in part to nonidealities that result in charge trapping followed by recombination of photocarriers in the QDs, and the lack of an optimal materials combination. To eliminate charge trapping, a p+-i-n+ cell employing QDs buried within a high band gap barrier layer is proposed and analyzed. The maximum solar power conversion efficiency under AM1.5 spectral radiation of an example GaAs-based photovoltaic cell employing 10-20 layers of InAs QDs surrounded by AlxGa1-xAs barriers in the junction built-in depletion region can be as high as 45%. Higher efficiencies are anticipated for InP-based cells. This represents a significant improvement over GaAs homojunction cells with maximum efficiencies of <25%.

Electric Power Supplies↗

Electricity generation and microbial community analysis of alcohol powered microbial fuel cells.

Two different microbial fuel cell (MFC) configurations were investigated for electricity production from ethanol and methanol: a two-chambered, aqueous-cathode MFC; and a single-chamber direct-air cathode MFC. Electricity was generated in the two-chamber system at a maximum power density typical of this system (40+/-2 mW/m2) and a Coulombic efficiency (CE) ranging from 42% to 61% using ethanol. When bacteria were transferred into a single-chamber MFC known to produce higher power densities with different substrates, the maximum power density increased to 488+/-12 mW/m2 (CE = 10%) with ethanol. The voltage generated exhibited saturation kinetics as a function of ethanol concentration in the two-chambered MFC, with a half-saturation constant (Ks) of 4.86 mM. Methanol was also examined as a possible substrate, but it did not result in appreciable electricity generation. Analysis of the anode biofilm and suspension from a two-chamber MFC with ethanol using 16S rDNA-based techniques indicated that bacteria with sequences similar to Proteobacterium Core-1 (33.3% of clone library sequences), Azoarcus sp. (17.4%), and Desulfuromonas sp. M76 (15.9%) were significant members of the anode chamber community. These results indicate that ethanol can be used for sustained electricity generation at room temperature using bacteria on the anode in a MFC.

Electric Power Supplies↗