Continuous, flow-through immunomagnetic cell sorting in a quadrupole field.

Abstract

A flow-through quadrupole magnetic cell separator has been designed, built, and evaluated by using a cell model system of human peripheral T lymphocytes (CD4+, CD8+, and CD45+ cells). The immunomagnetic labeling was accomplished by using a sandwich of mouse anti-human monoclonal antibody conjugated to fluorescein isothiocyanate and rat anti-mouse polyclonal antibody conjugated to a colloidal magnetic nanoparticle. The feed and sorted fractions were analyzed by FACScan flow cytometry. The magnetically labeled cells were separated from nonlabeled ones in a flow-through cylindrical column within a quadrupole field, which exerted a radial, outward force on the magnetic cells. The flow rate of the cell samples was 0.1-0.75 ml/min, and the flow rate of sheath fluid was 1.5-33.3 times that of the sample flow rate. The maximum shear stress exerted on the cell was less than 1 dyne/cm2, which was well below the level that would threaten cell integrity and membrane disruption. The maximum magnetic field was 0.765 T at the channel wall, and the gradient was 0.174 T/mm. The highest purity of selected cells was 99.6% (CD8 cells, initial purity of 26%), and the highest recovery of selected cells was 79% (CD4 cells, initial purity of 20%). The maximum throughput of the quadrupole magnetic cell separator was 7,040 cells/s (CD45 cells, initial purity of 5%). Theoretical calculations showed that the throughput can be increased to 10(6) cells/s by a scale-up of the current prototype.