PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Silicates”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

Effects of silicate polymers on erythrocytes in presence and absence of complement.

The effects of silicates upon erythrocytes depend upon the degree of polymerization. Monomeric silicate does not appear to be taken up by red cells. Polymerized silicates are taken up and bound tightly. In the presence of small polymeric forms erythrocytes are lysed by complement. Larger polymers are bound to erythrocytes but do not sensitize to complement hemolysis. Larger polymers, however, are directly toxic and cause hemolysis in the absence of complement. Red cells exposed to complement-active polymers show characteristic alteration in morphology with the assumption of irregular bell shapes. Larger polymers cause the cells to become spherical before spontaneous rupture occurs. Large polymers cause erythrocyte agglutination but this is minimal or absent with small complement-active polymers. Complement-active polymers cause little or no change in osmotic fragility. Increase in mechanical fragility is a sensitive indication of the presence of larger, agglutinating polymers. The conversion of pneumococci from Gram positivity to negativity appears to be caused principally by complement-active polymers. Possible implications of polymer size and complement activity are discussed in relation to production of silicotic lesions by silica-containing ores.

Complement System Proteins↗

Comparison of Tc-99m HIG and three-phase Tc-99m MDP bone scintigraphy for evaluating the efficacy of Yttrium-90 silicate radionuclide synovectomy.

PURPOSE: The aim of this study was to compare Tc-99m human immunoglobulin (HIG) and three-phase Tc-99m MDP bone scintigraphy for the assessment of the efficacy of Y-90 silicate therapy in rheumatoid knee synovitis. MATERIALS AND METHODS: Fifteen patients with rheumatoid arthritis and chronic persistent synovitis in 23 knee joints had radionuclide synovectomy with Y-90 silicate. The patients underwent imaging before and 3, 6, 9, and 12 months after therapy using clinical evaluation, Tc-99m HIG scintigraphy, and three-phase Tc-99m MDP bone scintigraphy. RESULTS: In the 13 of 23 knee joints that showed successful clinical results with Y-90 therapy, the Tc-99m HIG index values obtained 3 months after radionuclide synovectomy were significantly lower than the pretreatment index values (P < 0.001). In the same 13 joints, the Tc-99m MDP index values (in the blood-pool and delayed phases) before and 3 months after therapy were statistically similar. Six months after injection, these values were significantly lower in both the blood-pool (P < 0.001) and late (P < 0.05) phases in all 13 joints. In the other 10 of 23 knee joints that did not respond to treatment, the Tc-99m MDP and Tc-99m HIG index values were statistically similar before and after Y-90 therapy. CONCLUSIONS: Based on these findings, Tc-99m HIG scintigraphy appears to be a valuable method that complements clinical assessment of the efficacy of Y-90 silicate therapy in rheumatoid knee synovitis, starting in the early post-treatment period. However, three-phase Tc-99m MDP bone scintigraphy may be valuable in the late postsynovectomy period.

Adult↗

Fluoride release from a fluoride-containing amalgam, a glass ionomer cement and a silicate cement in artificial saliva.

This study aimed to compare the fluoride release from a fluoride-containing amalgam, a silicate cement and a glass ionomer cement in artificial saliva. After storing specimens in an artificial saliva for 7 weeks, the fluoride content in the solvent was measured by a spectrophotometric method. The fluoride release from silicate cement was about 5 times greater than from glass ionomer cement, which again showed a release 4 times greater than the fluoride-containing amalgam. The fluoride release relative to fluoride content in test specimens was greater from fluoride-containing amalgam and silicate cement than from glass ionomer cement.

Chemical Phenomena↗

Effect on caries of self-application of a zirconium silicate paste containing 9% stannous fluoride.

A 2-year clinical trial was conducted using an adolescent population from a low-fluoride area to evaluate the anticaries effect of self-applications of zirconium silicate paste containing 9% stannous fluoride. tthree study groups totaling 464 children, with an initial average of 12.8 years, completed the study. The control group brushed with a non-fluoride zirconium silicate paste (tzircate Prophylaxis Paste) once each year: the first experimental group brushed with zirconium silicate paste containing 9% stannous fluoride (Zircate Treatment Paste) once each year; and the second experimental group brushed every 6 months with Zircate Treatment Paste. After 2 year, the DMFT and DMFS increments were virtually identical for the control group and the group that received one application of fluoride paste per year. The group that received two applications of fluoride paste per year had a DMTF increment that was about 24% less than that of the control group; however, the DMFS increment was only 5% less. These differences were not statistically significant at the P=.05 level.

Adolescent↗

Pulpal reactions to surface-sealed silicate cement and composite resin restorations.

The effect of surface sealing and presence of bacteria in connection with pulpal response to silicate cement and composite resin restorations was tested in monkey teeth. Surface-sealing of silicates reduced the pulpal reactions to this material, whereas no such effect was observed when composites were sealed. Bacteria regularly occurred on the cavity walls except underneath zinc oxide/eugenol (ZOE) fillings and when silicates were sealed with ZOE. The frequency of bacteria was higher in teeth with unacceptable pulpal responses (44 of 49) than in teeth with acceptable reactions (48 of 79).

Animals↗

Pulmonary disease from exposure to an artificial aluminium silicate: further observations.

A cross sectional analysis of the relation between exposure to an artificial aluminium silicate (alunite residue) and pulmonary function changes has been made in 32 subjects, 17 of whom had been previously reported and in whom there was suggestive evidence of a dose response relation between gas transfer and total silicate exposure. Longitudinal data were also available for nine subjects. No dose effect relation was observed in either analysis and only one of the three subjects previously observed to have an abnormal chest radiograph (the index subject) had deteriorated appreciably. Respirable particles of alunite residue were injected intratracheally into Syrian hamsters. No evidence of pulmonary toxicity was seen as judged by bronchoalveolar lavage measurements of the concentrations lactic dehydrogenase, albumin, and the lambda fraction of gold, and the numbers of macrophages, polymorphonuclear cells, and red blood cells (alpha-quartz and ferrous oxide were used as positive and negative controls). These results do not support a significant toxic effect of this aluminium silicate on the lungs.

Adolescent↗

Pure silicate fragment in a recurrent stone former of calcium oxalate.

Long-time oral intake of magnesium-silicate-containing drugs is thought to be a causative factor inducing silicate urolithiasis. Besides, magnesium seems to play an anti-urolithogenic part in the formation of calcium oxalate stones. We report a recurrent calcium oxalate former who had been treated with magnesium aluminometasilicate antacid for gastric ulcer for approximately 17 years. One of the fragments found during extracorporeal shock wave lithotripsy was identified as 100% silicate. Deposition of silica was also found on other fragments. A large dose of magnesium (given in a part of the drug) might have little influence on the formation of calcium oxalate.

Aluminum Compounds↗

Fluoride distribution in teeth using a silicate model.

The fluoride determinations were done on enamel biopsies taken before and after restoration of extracted teeth with silicate cement. Two sites, one near the restoration and one 3 mm or more away from the restoration, were assayed. No difference was noted in pre- and post-restoration biopsies when teeth were restored with a fluoride-free silicate. Post-restoration biopsies at sites near and away from the restoration were significantly higher in fluoride as compared to pre-restoration biopsies when the teeth were restored with a fluoride-containing silicate.

Dental Cements↗

Penetration of ions from silicate cement restorations into Copalite--covered cavity walls.

This study aimed to asses the effect of silicate cement on Copalite -covered cavity walls in extracted human teeth. Class V cavities were prepared in 24 premolars and filled with silicate cement (Bio-Trey). Four cavities were unlined, the rest of the cavities were lined with 1 or 2 layers of Copalite before insertion of the restorations. After 6 months, 70-100 microns thick longitudinal sections of the teeth were studied by polarized light microscopy, microradiography and electron probe microanalysis. When imbibed in water or quinoline, a subsurface zone of altered birefringence was noticed in nearly all cavity walls. Nearly half of the cavity walls in the experimental groups showed a surface zone of increased radiopacity. In a few instances a subsurface radiolucent zone was present. By electron probe microanalysis F (0,4-3% by weight), Zn (1-4%) and Al (0,2-6%) were measured in the outer 10-60 microns of the cavity walls. The study shows that even with a double layer of Copalite, known to prevent microleakage, a desirable uptake of F and Al from silicate restorations into cavity walls can take place. Copalite does not prevent a phosphoric acid effect on the cavity walls.

Aluminum↗

Microstructure and strength properties of silicate and glass ionomer cements.

Microstructure characterization of silicate and glass ionomer cements has been carried out using, SEM, EDAX and ion microprobe techniques. The distribution of aluminum, calcium, fluorine, phosphorus or silicon was measured in the set cement surfaces. Cracks in the cement specimens produced by mechanical breaking, in contraction during setting, or as a result of SEM preparation were observed to occur mainly in the matrix and in the interface between matrix and particle. Powders of silicate and glass ionomer cements were separated into various fractions using sieves or cyclone separation technique. Compressive strength measurements of specimens made of powders with various size distributions have been assessed. The fractionation did not reveal any strong effect on the compressive strength properties either for the silicate or the glass ionomer cement.

Chemical Phenomena↗

[Comparative studies on the cytotoxic effect of composite filling materials and silicate cement].

The biologic compatibility of two composite materials (Cosmic, Epstic) based on Bowen's resin and two silicate cements (Frontasil, Silicap) and theirs components were assessed in cell culture. The compounds eluated from the material specimens under physiological conditions affected monolayer cultures of rat fibroblasts and rat epithelial cells (linr RL-19). Silicate cement eluate brings about death of cells due to high concentration of H-ions. Neutralized eluate of freshly prepared Cosmic, Estic and Frontasil caused the same cell damage which was less pronounced following Silicap eluate. The toxicity was markedly reduced following use of an eluate material which had a setting time of 24 hours. After the 2nd and 3rd elution of same specimen the cytoxicity was noticeably weakened, however, it was still demonstrable. The patterns of injury were different following composite material and silicate cement. All tested components soluted in Eagle medium have an irritating effect on the cultivated cells.

Animals↗

Serum lipid picture of rabbits fed on silicate-supplemented atherogenic diet.

Silicon is recognised as a protective trace element in atherosclerosis by epidemiologic and biochemical studies. The goal of the present work was the evaluation of the antiatheromatous effect of the natrium silicate in an experimental trial on 30 rabbits given a standard diet (control), an atherogenic diet (L1 lot) and a natrium silicate-supplemented atherogenic diet (L2 lot), by comparing the variation of the lipid pictures between each of the experimental lots and control. Levels of total lipids, cholesterol, triglycerides (TG), free fatty acids (FFA) and phospholipids indicated that the natrium silicate supplemented to the atherogenic diet minimised the lipid metabolism unbalance by keeping constant the level of FFA and TG in rabbits.

Animals↗

[Silicate calculi: report of two cases].

Two patients, aged 53 and 55, discharged stones spontaneously. Infrared spectrophotometry of the stones demonstrated silicate. They had no history of taking magnesium silicate. Thirty cases of silicate calculi previously reported in the Japanese literature are reviewed.

Aged↗

Effect of silicate minerals (zeolite, bentonite, kaolin, granite) on in vitro fermentation of amorphous cellulose, meadow hay, wheat straw and barley.

The objective of the present experiment was to determine the effects of addition of silicate minerals, zeolite (Z), bentonite (B), kaolin (K), granite (G) on the rumen fermentation parameters, total gas, methane, total and individual volatile fatty acids (VFA) and hydrogen recovery in rumen fluid inoculum from sheep. Different materials (0.25 g) meadow hay (MH), wheat straw (WS), barley (BA) and amorphous cellulose (AC) were used as substrates. Silicate minerals (0.1 g) were added to the fermentation bottles containing substrates and rumen fluid inoculum and incubated for 72 h in vitro. The gas production technique simulates fermentation in the rumen was used to determine fermentation parameters. The total gas production was significantly higher compared to control for MH plus B (MHB), MH plus G (MHG), WS plus Z (WSZ), WS plus B (WSB), WS plus K (WSK), WS plus G (WSG), AC plus B (ACB), AC plus G (ACG), BA plus Z (BAZ), BA plus B (BAB), BA plus K (BAK), BA plus granite (BAG). Significant differences of the methane production were found between the controls, WSG, BAB and BAK. The total VFA concentration was increased in ACG (83.1 mM). The acetate: propionate (A:P) ratio of the control and additives ranged between 3.1 and 3.6 for MH, 2.7 and 3.5 for WS, 1.6 and 1.8 for AC and 2.3 and 2.9 for BA. It was concluded that the silicate minerals had no appreciable effect on the methane production, however, they support the microbial metabolism by influencing (bentonite, granite) and slightly influencing (zeolite, kaolin) the rumen fermentation.

Animal Feed↗

[Two cases of silicate urolithiasis].

Case 1: A 31-year-old woman with the chief complaint of right back pain was referred to our hospital. She was diagnosed with a right ureteral stone and it was delivered spontaneously after conservative medical therapy. The stone was found to consist of silicate by infrared spectrometry. Case 2: A 71-year-old man with the chief complaint of asymptomatic macrohematuria was referred to our hospital. No tumor was observed by cystourethroscopy, but a right ureteral stone was found by computerized tomography. Subsequently, it was delivered immediately and infrared spectrometry of the stone demonstrated silicate containing a small amount of calcium oxalate monohydrate. We analyzed and discussed 44 cases of silicate urolithiasis reported in Japan.

Adult↗

[A case of silicate urolithiasis].

We report a case of silicate calculi with no history of taking magnesium trisilicate. A 33-year-old woman was sent to our hospital as an emergency case because of severe right lower flank pain. Physical examination was unremarkable except for severe right cost-vertebral angle knock pain. She denied administration of a magnesium trisilicate anti-acid before. She was admitted to the urologic ward since the pain did not relieve in spite of several analgesics. The stone passed spontaneously on the third hospital day. Analysis by infrared spectrophotometry demonstrated the composition to be over 98% of silicate. A review of the literatures discloses only 21 cases of silicate stones.

Adult↗

Method for removal of surface-active impurities and calcium from conjugated bile salt preparations: comparison with silicic acid chromatography.

Some commercial preparations of common natural conjugated bile salts contain impurities (e.g., amines, lipids, and calcium) that are likely to affect their physicochemical properties. A method was developed for purifying commercial preparations of sodium salts of glycine- and taurine-conjugated bile acids. The method consists of passage of a dilute aqueous solution of the sodium bile salt through three columns in sequence: graphitized carbon, a hydrophobic bonded octadecylsilane (C18) cartridge, and a calcium-chelating resin. The final solution was extracted with chloroform, and the purified bile salt was then isolated by freeze-drying, with a yield of 65-75%. Each bile salt purified by this method was compared with the corresponding bile salt purified by conventional adsorption chromatography on a silicic acid column, using a mixture of methanol and chloroform as eluant. Purity was assessed by visible spectra, by surface tension measurements (using the maximum bubble-pressure method and a Wilhelmy wire method), by chloroform extractability of impurities in the conjugated bile acid, by liposome solubilization, and by chemical analysis of the calcium content. Both purification methods removed colored and surface-active impurities, but the new method was always as or more effective than silicic acid column chromatography. Calcium ion, present in commercial bile salts in concentrations up to 16 mmol/mol bile salt, was removed completely by the three-column method, but not by silicic acid chromatography. The new method is thus a simple, rapid, and efficient procedure for purification of the sodium salts of glycine- and taurine-conjugated bile acids for physicochemical measurements, in which elimination of surface-active impurities and polyvalent cations is desired.

Bile Acids and Salts↗

Prospective use of electrospun ultra-fine silicate fibers for bone tissue engineering.

Electrospinning involves the generation of a jet of viscous solution, and results in the formation of ultra-fine fibers. Silicate fibers prepared using this technology and via the sol-gel process were evaluated as scaffolds for bone tissue engineering. We found that human osteoblastic MG63 cells successfully adhered on individual silicate fibers, and proliferated on them. In an apatite-formation ability study, spherical particles covered the fibers after soaking in simulated body fluid for 7 days. Energy dispersive X-ray analysis revealed that Ca/P atomic ratio of the particles was similar to that of human bone. In addition, X-ray diffraction analysis revealed that crystalline structure of the particles agreed with that of apatite. These results suggest that electrospun silicate fibers are a potential candidate for scaffolding material in bone tissue engineering.

Apatites↗