PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Distillation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100Linked to original sources

Determination of total sulfite in wine. Zone electrophoresis-isotachophoresis quantitation of sulfate on a chip after an in-sample oxidation of total sulfite.

This work deals with the determination of total sulfite in wine. The determination combines an in-sample hydrogen peroxide oxidation of total sulfite in alkalized wine to sulfate with the separation and quantitation of the latter anion by zone electrophoresis (ZE) on-line coupled with isotachophoresis (ITP) on a column-coupling chip. Sample clean up, integrated into the ITP-ZE separation, eliminated wine matrix in an extent comparable to that provided by a highly selective distillation isolation of sulfite. At the same time, conductivity detection, employed to the detection of sulfate in the ZE stage of the ITP-ZE combination, provided for sulfate the concentration limit of detection corresponding to a 90 microg/l concentration of sulfite in the loaded sample (0.9 microl). Such a detectability allowed a reproducible quantitation of total sulfite when its concentration in wine was 15 mg/l. Formaldehyde binding of free sulfite in wine, included into the pre-column sample preparation, prevented an uncontrolled oxidation of this sulfite form. This step contributed to an unbiased determination of sulfate present in the original wine sample (this determination corrected for the concentration of sulfate determined in the sample after the peroxide oxidation of sulfite to the value equivalent to the total sulfite). The 99-101% recoveries of sulfite, determined for appropriately spiked wine samples, indicate a very good accuracy of the present method. Such a statement also supports excellent agreements of the results of quantitation based on the in-sample peroxide oxidation of the total sulfite (bound sulfite released at a high pH) with those in which this analyte was isolated from wine by distillation (bound sulfite released at a very low pH).

Electrophoresis, Microchip↗

Mechanical stability of resin-dentin bond components.

OBJECTIVES: To evaluate the effects of long-term storage on the mechanical properties of the components of resin-dentin bonds, that is, resin composite, adhesive system, demineralized and mineralized dentin. METHODS: Specimens of resin composite (Z250) and adhesive systems (Single Bond-SB; One-Step-OS and Clearfil Liner Bond 2V-CL) were cast in molds. Dentin specimens were prepared from dentin discs obtained from the crowns of extracted human molars. Specimens of demineralized dentin were obtained by immersion of dentin discs for 6 days in 0.5 mol/l EDTA (pH 7.0). Both dentin and resin-based substrates were shaped to hourglass or I-beam specimens that were used to determine the true stress (TS) or apparent modulus of elasticity (E), respectively. Control specimens were subjected to tensile testing at 0.6 mm/min after 24 h of immersion in distilled water. Experimental specimens were stored at 37 degrees C in either distilled water or mineral oil and tested after 12 months. The data of each group were individually analyzed by ANOVA and Tukey's test. RESULTS: Both TS and E of the resin-based materials decreased significantly after 12 months of storage in water (p < 0.05) except the TS of SB (p > 0.05). No changes were observed for specimens of mineralized dentin, regardless of storage condition (p > 0.05). Storage of demineralized dentin in water did not cause any significant effect in either TS or E (p > 0.05), however, significant reductions of TS and E of demineralized dentin occurred after storage in oil for 1 year (p < 0.05). SIGNIFICANCE: Storage time and medium may be deleterious to the mechanical properties of the resin-dentin bond components, which ultimately could compromise the durability of resin-dentin bonds.

Analysis of Variance↗

Fluoride release from aged resin composites containing fluoridated glass filler.

OBJECTIVES: The aim of this study was to evaluate the fluoride release from aged resin composites containing different types of fluoridated glass filler into both deionized distilled water and lactic acid solution. METHODS: Three resin composites, UniFil S (containing fluoro-alumino-silicate glass filler), Reactmer (containing pre-reacted glass-ionomer filler) and Beautifil (containing both types of fillers) were used. A conventional glass-ionomer cement, Ketac-Fil, was used as a control. Five disk specimens of each material were prepared and aged in water for 10 weeks. After aging, specimens were immersed in deionized distilled water for a further 6 days and then in aqueous lactic acid (pH 4.0) for 2 days. This process was repeated twice more and the specimens were subsequently immersed in water for a further 12 days. Fluoride release was measured every 2 days throughout the post-aging period. RESULTS: The amount of fluoride release for aged UniFil S and Beautifil markedly increased in acid solution compared with water storage. The difference was not so great for aged Reactmer and Ketac-Fil. UniFil S and Beautifil gave significantly greater fluoride release in water following immersion in acid solution (p<0.05, two-way ANOVA and Scheffe's test), but Reactmer and Ketac-Fil showed no such increase in fluoride release after acid immersion. SIGNIFICANCE: These results suggested that the nature of the fluoridated glass filler within a resin composite and the way in which the material interacts with an acidic environment affected the amount of fluoride released.

Analysis of Variance↗

Dynamic visco-elastic properties of dental composite resins.

OBJECTIVES: This study aimed to examine the visco-elastic properties of dental composites by dynamic mechanical analysis under the influence of clinically relevant temperatures and variable frequencies, after being stored in air or distilled water for up to 3 months. METHODS: Two direct (Diamond Lite and Grandio) and two indirect (Artglass and Vita Zeta LC) composites were used. Samples were immediately tested (baseline) or stored at 37 degrees C, either in air or distilled water for 1 day, 7 or 90 days before testing. During dynamic testing, elastic modulus, viscous modulus and loss tangent were determined over a frequency range from 0.1 to 10 Hz at constant temperatures between 5 and 55 degrees C. RESULTS: Results were analyzed by one-way ANOVA and Turkey's-test. Elastic and viscous moduli were higher for direct than for indirect composites. No such evidence was found for loss tangent. Only the elastic modulus showed statistically relevant differences in the direct and indirect materials groups: Grandio showed higher modulus than Diamond Lite, while Artglass had higher modulus than Vita Zeta LC. The elastic modulus reduced with increasing temperature and decreasing frequency, while the loss tangent showed the opposite trend. The influence of temperature and frequency on viscous modulus was not conclusive. The elastic modulus was more sensitive to moisture than viscous modulus and loss tangent but all three properties showed no overall consistent trend in the results following the storage periods. SIGNIFICANCE: Dynamic mechanical analysis was a valuable tool to characterize the visco-elastic properties of dental composites, thus giving us a greater insight into material behavior.

Air↗

Subsurface degradation of resin-based composites.

OBJECTIVES: To determine the depth of a degraded subsurface layer produced in dental composites as a result of exposure to lactic acid or NaOH, by observing the penetration of AgNO(3) solution. METHODS: Specimens were prepared from four resin composites; Point 4 (Kerr), Premise (Kerr), Filtek Supreme (3M/ESPE), Ceram X (Dentsply), and two polyacid-modified resin composites; Dyract (Dentsply) and F2000 (3M/ESPE). The specimens were immersed in distilled water for 1 week, transferred to one of three aqueous media at 60 degrees C for 2 weeks; distilled water, 0.01mol/L lactic acid or 0.1N NaOH, washed and immersed in 50% (w/w) aqueous silver nitrate for 10 days at 60 degrees C and placed in a photodeveloper solution. After reduction of the silver, specimens were embedded in epoxy resin, sectioned and polished, coated with carbon, and examined by backscattered mode scanning electron microscopy. The depth of silver penetration into the degraded area was measured from the SEM micrographs. Energy dispersive analysis X-ray (EDAX) was used to confirm the presence of silver. RESULTS: NaOH produced the greatest depth of degradation and lactic acid the least. Premise showed the greatest depth of silver penetration when subjected to NaOH, and Filtek Supreme the second with peeling of the surface and cracking, whereas F2000 and Point 4 showed the least in NaOH and lactic acid. SIGNIFICANCE: ANOVA and Tukey's test showed that the depth of silver penetration was material and solution dependent, and the differences were significant for most of the materials (P<0.05).

Analysis of Variance↗

Photochemistry of a major commercial polybrominated diphenyl ether flame retardant congener: 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE153).

The photochemistry of a major commercial polybrominated diphenyl ether (PBDE) flame retardant congener, 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE153), was investigated in acetonitrile, distilled water, and seawater. After a short irradiation period in acetonitrile at 302 nm, the major photoproducts of BDE153 included 2,2',4,4',5-(BDE99), 2,2',4,5,5'-(BDE101), and 2,4,4',5,5'-(BDE118) substituted penta-BDEs as primary photohydrodebromination products, 2,2',4,4'-(BDE47), 3,3',4,4'-(BDE77), 2,3',4,4'-(BDE66), and 2,2',4,5'-(BDE49) substituted tetra-BDEs as secondary photohydrodebromination products, a suite of non-2,3,7,8-substituted mono- through penta-brominated dibenzofurans, and three tetrabrominated 2-hydroxybiphenyl congeners. By comparison, irradiation in distilled water and seawater gave increased relative photohydrodebromination contributions and no evidence for the formation of brominated dibenzofurans or 2-hydroxybiphenyls. In all solvent systems, subsequent degradation of primary and secondary photoproducts under continuing irradiation led to a steadily decreasing reaction mass balance. The results suggest a short photochemical half-life for BDE153 in aquatic systems, with rapid photohydrodebromination to some of the most prevalent penta- and tetra-brominated diphenyl ether congeners typically observed in environmental matrices.

Flame Retardants↗

Effects of Butea superba on reproductive systems of rats.

The effects of Butea superba on the reproductive system in male Wistar rats were investigated. The animals were fed daily with the powdered crude drug suspended in distilled water by a gastric tube at the dose of 2, 25, 250 and 1250 mg/kg body weight for 8 weeks. Rats fed with 1 ml of distilled water were used as a negative control. The weights of all vital organs in all treated groups were not different from the control. The percentage weight ratios of body weights of seminal vesicles and prostate glands were not different from the control, except that the testis of the group fed with 1250 mg/kg was significantly different from the control and the other treated groups. In addition, the sperm counts in this group showed about 16% more than the control group. Hematology as well as the liver and kidney function of all treated groups showed no difference from the control. B. superba, drug at 250 mg/kg which was 100 times more than the Thai FDA recommended dose for humans appeared to be safe in rats. The crude drug has demonstrated an increase tendency on testis weight and sperm counts in rat. The information from the present study can be used to explain the Thai folklore application of this plant in Thailand.

Administration, Oral↗

Buccal penetration enhancement properties of N-trimethyl chitosan: Influence of quaternization degree on absorption of a high molecular weight molecule.

The aim was to evaluate the influence of the degree of quaternization of N-trimethyl chitosans (TMCs) on the mucoadhesive and penetration enhancement properties towards buccal mucosa. Fluorescein isothiocyanate dextran (MW 4400 Da) (FD4) was used as model molecule. TMCs, obtained from chitosans of different MW (1460 and 580 kDa, respectively), were hydrated in distilled water and in pH 6.4 phosphate buffer (simulating the buccal fluid). The polymer solutions were subjected to mucoadhesion measurements towards bovine submaxillary mucin dispersion and porcine buccal mucosa and to FD4 permeation tests through porcine cheek epithelium. The trimethylation of chitosan allows maintenance or improvement of the mucoadhesive properties of the starting chitosans dependently on quaternization degree. In particular, the mucoadhesive properties increase on increasing degree of quaternization. The trimethylation does not produce any change in chitosan penetration enhancement properties when the medium is distilled water while if pH 6.4 buffer is used, the trimethylation produces an improvement in chitosan penetration enhancing effect. TMC derived from the lower MW chitosan and characterized by the highest degree of quaternization shows the best mucoadhesive and penetration enhancement properties and is the most promising TMC to improve the bioavailability of hydrophilic and large MW molecules (like peptides and proteins) when administered via buccal route.

Absorption↗

Xanthan-alginate composite gel beads: molecular interaction and in vitro characterization.

Xanthan gum (XG), a trisaccharide branched polymer, was applied to reinforce calcium alginate beads in this study. Composite beads consisting of XG and sodium alginate (SA) were prepared using ionotropic gelation method. Diclofenac calcium-alginate (DCA) beads incorporated with different amounts of XG were produced as well. Molecular interaction between SA and XG in the composite beads and the XG-DCA beads was investigated using FTIR spectroscopy. Physical properties of the XG-DCA beads such as entrapment efficiency of diclofenac sodium (DS), thermal property, water uptake, swelling and DS release in various media were examined. XG could form intermolecular hydrogen bonding with SA in the composite beads with or without DS. Differential scanning calorimetric study indicated that XG did not affect thermal property of the DCA beads. The DS entrapment efficiency of the DCA beads increased with increasing amount of XG added. The XG-DCA beads showed higher water uptake and swelling in pH 6.8 phosphate buffer and distilled water than the DCA beads. A longer lag time and a higher DS release rate of the XG-DCA beads in pH 6.8 phosphate buffer were found. In contrast, the 0.3%XG-DCA beads could retard the drug release in distilled water because interaction between XG and SA gave higher tortuosity of the bead matrix. However, higher content of XG in the DCA beads increased the release rate of DS. This can be attributed to erosion of small aggregates of XG on the surface of the DCA beads. This finding suggested that XG could modulate physicochemical properties and drug release of the DCA beads, which based on the existence of molecular interaction between XG and SA.

Alginates↗

Oral tryptic casein hydrolysate enhances phagocytosis by mouse peritoneal and blood phagocytic cells but fails to prevent induced inflammation.

Mouse experiments were conducted in order to find whether oral application of tryptic casein hydrolysate (TCH) results in enhancement of phagocytosing capacity of murine phagocytic cells as well as whether such application might be of use for prevention of inflammatory processes. Phagocytosing capacity of phagocytic cells of mice that received oral TCH once daily in a dose of 1.0 mg/g body weight dissolved in 0.5 ml of distilled water for five successive days was significantly higher (p < 0.05) than that of mice given equivalent volumes of distilled water, with a phagocytosing capacity enhancement index being 1.39 and 1.34 regarding peritoneal macrophages and blood phagocytic cells, respectively. Taken on the other hand, the immunostimulatory effects of oral TCH were found to be not enough to prevent mice from inflammation that was induced experimentally using acute (paw edema) and contact hypersensitivity models. A possibility for development of food protein enzymatic hydrolysates as antimicrobial immunostimulants acting through improvement of phagocytic cell functioning is discussed.

Administration, Oral↗

Techniques of preparing plant material for chromatographic separation and analysis.

This paper discusses preparation techniques of samples of plant material for chromatographic analysis. Individual steps of the procedures used in sample preparation, including sample collection from the environment or from tissue cultures, drying, comminution, homogenization, leaching, extraction, distillation and condensation, analyte enrichment, and obtaining the final extracts for chromatographic analysis are discussed. The techniques most often used for isolation of analytes from homogenized plant material, i.e., Soxhlet extraction, ultrasonic solvent extraction (sonication), accelerated solvent extraction, microwave-assisted extraction, supercritical-fluid extraction, steam distillation, as well as membrane processes are emphasized. Sorptive methods of sample enrichment and removal of interferences, i.e., solid-phase extraction, and solid-phase micro-extraction are also discussed.

Chromatography↗

Modification of a montmorillonite-illite clay using alkaline hydrothermal treatment and its application for the removal of aqueous Cs+ ions.

A montmorillonite-illite clay was modified using alkaline hydrothermal treatment (reflux method) and applied to the removal of aqueous Cs+ ions. The alkaline solutions were prepared by dissolving NaOH in seawater and in distilled water, and the effect of the two alkaline media on the sorption capacities of the modified clay was discussed. The modified materials were characterized using XRD, SEM/EDS, and FTIR. As a result of the modification, the original mineral was partially transformed into a zeolitic material with spherical morphology. The results showed that the modification improved the Cs+ uptake capacity of the starting clay, with the clay modified in distilled water medium demonstrating higher sorption capacity. The sorption data were adequately described using the Freundlich and Dubinin-Radushkevich isotherm models.

Journal Article↗

Surface oxidation of polyethylene using an atmospheric pressure glow discharge with liquid electrolyte cathode.

This study investigated the action of an atmospheric pressure air glow discharge (APGD) with aqueous electrolyte cathode onto the surface of polyethylene (PE) films. Distilled water and aqueous solutions of KCl and HCl were utilized as a cathode. The surface properties of PE were characterized by contact angle measurement followed by surface free energy calculation, Fourier transform infrared by attenuated total reflectance (FTIR-ATR), and XPS. After treating the PE surface, we observed OH groups, CO groups in ester, ketone, and carboxyl groups, and CO groups in unsaturated ketones and aldehydes. For a treatment time of 20 min and a discharge current of 40 mA, atomic concentrations of O and N were 12% and 2%, respectively, under distilled water application. Modification processes were able to improve the surface free energy of PE.

Journal Article↗

Dissolution-induced preferential flow in a limestone fracture.

Flow in a rock fracture is surprisingly sensitive to the evolution of flow paths that develop as a result of dissolution. Net dissolution may either increase or decrease permeability uniformly within the fracture, or may form a preferential flow path through which most of the injected fluid flows, depending on the prevailing ambient mechanical and chemical conditions. A flow-through test was completed on an artificial fracture in limestone at room temperature under ambient confining stress of 3.5 MPa. The sample was sequentially circulated by water of two different compositions through the 1500 h duration of the experiment; the first 935 h by tap groundwater, followed by 555 h of distilled water. Measurements of differential pressures between the inlet and the outlet, fluid and dissolved mass fluxes, and concurrent X-ray CT imaging and sectioning were used to characterize the evolution of flow paths within the limestone fracture. During the initial circulation of groundwater, the differential pressure increased almost threefold, and was interpreted as a net reduction in permeability as the contacting asperities across the fracture are removed, and the fracture closes. With the circulation of distilled water, permeability initially reduces threefold, and ultimately increases by two orders of magnitude. This spontaneous switch from net decrease in permeability, to net increase occurred with no change in flow rate or applied effective stress, and is attributed to the evolving localization of flow path as evidenced by CT images. Based on the X-ray CT characterizations, a flow path-dependent flow model was developed to simulate the evolution of flow paths within the fracture and its influence on the overall flow behaviors of the injected fluid in the fracture.

Calcium Carbonate↗

Preparation, characterization and in vitro release of gentamicin from PHBV/wollastonite composite microspheres.

Composite microspheres have been prepared from bioactive wollastonite (W) and biodegradable poly (hydroxybutyrate-polyhydroxyvalerate) (PHBV) in the present study. Gentamicin was encapsulated into the microspheres by the absorption method and the in vitro release of the gentamicin from the microspheres was performed in distilled water, modified simulated body fluid (SBF) and phosphate buffered saline (PBS) at 37 degrees C for 22 days, respectively. The results showed that the release behavior of gentamicin from PHBV/W composite microspheres was similar to that from the pure PHBV microspheres when the experiment was performed in distilled water. However, in the PBS and SBF solutions, gentamicin released from the PHBV/W composite microspheres at a relatively lower rate as compared to that of the pure PHBV microspheres and 90% of the total amount of gentamicin released from the composite microspheres after soaking for 22 days, which was much longer than that for the release of the same amount gentamicin from the pure PHBV microspheres (8 days). Scanning electron microscopy (SEM) and energy-dispersive spectrometer (EDS) analysis on the microspheres after release in SBF and PBS revealed that a microporous apatite layer was formed on the composite microspheres surface, which resulted in a controlled release behavior of the gentamicin from the PHBV/W composite microspheres. All of these results provided the possibility that the PHBV/W composite microspheres could be applied as alternative drug controlled release systems, especially as bone fillings for bone repair due to their advantages of controlled releasing antibiotics and apatite-formation ability, through which the implanted microspheres could chemically bond to the surrounding tissue in vivo.

Algorithms↗

Time course of lens capsule staining using trypan blue and indocyanine green: in vitro study in porcine eyes.

PURPOSE: To determine whether staining of the lens capsule with trypan blue 0.1% and indocyanine green (ICG) 0.5% diminishes with time and whether it differs between the anterior and posterior capsules. SETTING: Department of Ophthalmology, Keio University School of Medicine, Tokyo, Japan. METHODS: Crystalline lenses removed from porcine eyes were stained for 10 seconds with 0.1 mL of trypan blue 0.1% or indocyanine green 0.5%. They were then placed in distilled water and observed for the persistence of staining over time. In a second experiment, the anterior chamber and internal aspects of the anterior capsule and internal and vitreous aspects of the posterior capsule were gently irrigated with 0.1 mL of trypan blue 0.1% or ICG 0.5%. After 10 seconds, the capsules were irrigated with distilled water and the staining intensities were compared. RESULTS: Staining was not diminished 30 seconds, 5 minutes, or 1 hour after application of either dye. No difference was evident in staining intensity or diminution with time between the anterior and posterior capsules, but the external aspects were stained more than the internal aspects with both dyes. Trypan blue produced more intense staining than ICG. CONCLUSIONS: Since the intensity of capsule staining in the intact lens did not change during a 1-hour immersion in water, capsule dyes may not dissipate fully during cataract surgery. As possible long-term adverse effects have not been ruled out, capsule dyes should be used in a low concentration for a short exposure time.

Animals↗

Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials.

OBJECTIVES: To determine the degree of surface staining of resin-based composites (RBCs) and glass-ionomer cements (GICs) after immersion in various stains and food-simulating solutions (FSS). METHODS: Six tooth-coloured restorative materials were used: a light-cured microfilled RBC (Durafil, Kulzer), a light-cured microglass RBC (Charisma, Kulzer), a polyacid-modified RBC (F2000, 3M/ESPE), a conventional GIC (Fuji IX, GC) and two resin-modified GICs (Fuji II LC, GC; Photac Fil, 3M/ESPE). Disk-shaped specimens were prepared and tested with either a matrix finish or polished using wet silicon carbide papers up to 2000 grit. All specimens were immersed in 37 degrees C distilled water for 1 week, followed by three different FSS (water, 10% ethanol, Crodamol GTCC) and five stains (red wine, coffee, tea, soy sauce and cola) for a further 2 weeks. Three specimens of each material for each stain were tested. Colour coefficients (CIE L* a* b*) were measured by a spectrophotometer after each treatment. The change in colour (DeltaEn) was calculated using the formula: DeltaEn=[(DeltaLn+(Deltaa(n))2+(Deltab(n))2]1/2. RESULTS: Distilled water caused no perceptible colour change as tested by ANOVA and Tukey's tests. The effect of surface finish on staining was not statistically significant (P>0.05). There was no strong interaction between FSS and stains or between FSS and materials. There was a strong interaction between surface and material, and stain and material (P<0.001). CONCLUSIONS: All materials were susceptible to staining by all stains especially coffee, red wine and tea; Fuji IX showed the least susceptibility and F2000 the greatest.

Analysis of Variance↗

The constituents of essential oil and in vitro antimicrobial activity of Micromeria cilicica from Turkey.

The chemical composition of the essential oil of Micromeria cilicica (Labiatae) that has been used in folk medicine were analysed by GC, GC-MS, 1H NMR and 13C NMR. The totals of 34 components in hydrodistillation, 30 components in steam distillation were detected. The major component characterized in the essential oils was pulegone (66.55, 64.10%) and other main components were determined as cis-p-menthone (21.71, 25.31%), trans-p-menthone (9.59, 5.59%), nerol (0.35, 2.49%) and 3-octonol (0.81, 0.25%), respectively. Essential oils obtained by hydro and steam distillation and organic solvent extracts of the aerial parts of the plant were investigated for antimicrobial activities on several microorganisms including bacteria and yeast. Moreover, the main constituent of the oil has been tested against the same microorganisms. The extracts and pulegone exhibited a significant antibacterial and antifungal activity. The activities were increased depend on the amount of extracts and pulegone. Pulegone also showed antimicrobial activity, particularly against Candida albicans and Salmonella typhimurium. Furthermore Candida albicans is the most susceptible to pulegone giving two times the effect of nystatin.

Anti-Bacterial Agents↗

Refine your search to explore more results.