PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “ROOT CANAL OBTURATION”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

Obturation of root canals with different sealers using non-instrumentation technology.

AIM: To evaluate and compare the sealing quality of hand- or vacuum-obturated root canals after hand preparation or hydrodynamic cleansing of root canals, respectively. METHODOLOGY: After assessing root curvature, 96 single-rooted deep-frozen teeth were divided into eight comparable groups. The root canals of four groups were instrumented with the balanced force technique. The remaining uninstrumented teeth were connected to a reduced-pressure device (NIT) and the root-canal system perfused with 2.5% NaOCl under alternating pressure fields. This dissolved the pulpal tissues and removed debris from the root-canal system. The canals of the hand-instrumented groups were obturated using the cold lateral condensation method with guttapercha and one of four different sealers (AH26, AH Plus, Apexit and Pulp Canal Sealer EWT). The teeth treated with the alternating pressure device (NIT) were obturated by a vacuum obturation method (NIT) with the same four sealers. The quality of the coronal seal was assessed using a dye penetration method. In order to minimize errors the roots were perfused with water before exposure to the dye, under vacuum. The teeth were then rendered transparent and the depth of penetration of the dye between the wall of the canal and the obturating material was measured with a stereomicroscope. RESULTS: The canals cleaned and filled by NIT showed statistically significantly less dye penetration than those obturated by lateral condensation (P < 0.05). Within the NIT group, Pulp Canal Sealer EWT exhibited significantly more dye penetration than Apexit. Amongst the control lateral condensation groups no significant differences were found between the various sealers. CONCLUSIONS: The present investigation demonstrated the validity of the NIT obturation method in combination with commonly used root-canal sealers.

Bismuth↗

Comparison of vertical with lateral condensation technique in obturation of root canal system.

OBJECTIVE: To compare vertical condensation with laterally condensed gutta-percha technique in obturation of root canal system. DESIGN: A comparative study. PLACE AND DURATION OF STUDY: The Armed Forces Institute of Dentistry (Operative Deptt), Rawalpindi. SUBJECTS AND METHODS: Fifty six human permanent extracted teeth were collected from central incisor to second molar from the both arches and in vitro root canal procedure was carried out. RESULTS: Warm vertical technique resulted in a uniform smooth surface and least observable space between gutta percha and canal wall, especially in middle and apical region. CONCLUSION: Root canal obturation by warm vertical condensation is better than cold lateral condensation.

Humans↗

Long-term obturation quality using noninstrumentation technology.

The aim of the study was to evaluate and compare the sealing quality of hand- or vacuum-obturated root canals after hand instrumentation or noninstrumentation cleansing. A total of 60 single-rooted teeth were divided into six comparable groups. The root canals of three groups were instrumented with the balanced-force technique and obturated with gutta-percha condensation. The remaining teeth were cleansed and filled using noninstrumentation technology and the same sealers as with hand instrumentation (AH Plus, Apexit, Pulp canal sealer EWT). After aging the quality of coronal seal was assessed with a dye penetration method after perfusion with the dye under vacuum. The results of this study indicated superior sealing of the machine-filled roots (noninstrumentation technology), compared with laterally condensed conventionally filled root canals.

Calcium Hydroxide↗

Comparison of cold lateral condensation and a warm multiphase gutta-percha technique for obturating curved root canals.

AIM: The aim of this project was to evaluate and compare the radiographic quality and sealability of root fillings in extracted human teeth using lateral condensation of gutta-percha or multiphase gutta-percha obturation (Alphaseal). METHODOLOGY: A total of 108 freshly extracted human, mature single-rooted teeth were divided into two identical groups of 54 teeth on the basis of root canal shape. The canals were prepared to a minimum 0.055 taper and enlarged to size 35 at the apex. All root canals were flushed with 17% EDTA solution and 2.5% NaOCl to remove the dentinal smear layer. The canals of one group were obturated using cold lateral condensation of gutta-percha and the canals of the other group were filled using a warm multiphase gutta-percha obturation technique. The extrusion of sealer and/or gutta-percha through the apex of the teeth was recorded using a simple yes/no scheme. The sealability of each technique was assessed by a dye penetration method. The radiographic quality of obturation was determined for each canal using a four-point scale. RESULTS: Root canals filled by multiphase obturation had significantly more extrusion of sealer (P < 0.001) and gutta-percha (P < 0.001) than canals filled by lateral condensation. Canals filled by multiphase gutta-percha obturation had significantly less apical dye leakage than those obturated by lateral condensation (P < 0.05). Lateral condensation achieved significantly better scores for radiographic quality than multiphase obturation from the bucco-lingual view (P < 0.01). CONCLUSIONS: Under laboratory conditions multiphase gutta-percha had better sealability but poorer radiographic quality than lateral condensation.

Composite Resins↗

Comparison of lateral condensation and thermomechanically compacted warm alpha-phase gutta-percha with a single cone for obturating curved root canals.

OBJECTIVE: To evaluate and compare the sealability and radiographic quality of root fillings in extracted teeth by using lateral condensation of gutta-percha or alpha-phase gutta-percha in conjunction with a single gutta-percha cone. STUDY DESIGN: A total of 108 single-rooted teeth were divided into 2 groups of 54 teeth based on canal shape. Canals were prepared to a minimum 0.055 taper and enlarged to a size 35 at the working distance. Irrigation was done with 17% EDTA and 2.5% sodium hypochlorite (NaOCl) to remove smear layer. One group was obturated by using cold lateral condensation of gutta-percha; the other group was obturated with thermomechanically compacted alpha-phase gutta-percha and a single cone of gutta-percha. Apical extrusion of sealer or gutta-percha was recorded. Sealability of each technique was assessed by dye penetration. The radiographic quality of obturation was also determined. RESULTS: Root canals filled with alpha-phase gutta-percha and a single cone had significantly more extrusion of sealer than canals filled by lateral condensation. Lateral condensation achieved significantly better scores for radiographic quality. There was no significant difference between the 2 filling techniques in terms of apical or coronal leakage. CONCLUSIONS: Thermomechanically condensed alpha-phase gutta-percha used in conjunction with a single gutta-percha cone had poorer radiographic quality than laterally condensed gutta-percha.

Dental Leakage↗

Fluid transport and bacterial penetration along root canal fillings.

Convective transport of water from the coronal to the apical end of obturated root canals was determined by the movement of an air bubble in a capillary glass tube connected to the apex of the experimental root section using a headspace pressure of 120 kPa (1.2 atm). Water transport through existing voids in the obturated canals could be measured reproducibly in this way. The root canals of 60 human maxillary canines were filled with gutta-percha and sealer by the cold lateral condensation technique. Thirty of these were first exposed to a small motile bacterium, Pseudomonas aeruginosa, growing in a reservoir at the coronal end of each root. After 50 days, two specimens allowed penetration of bacteria to a reservoir at the apical end. All the roots were then assessed quantitatively for convective transport of water. The results were divided into three defined categories: 39 obturated canals were in the 'bacteria tight' category, 14 canals in the 'slight leakage' and 7 canals in the 'gross leakage' category. The two specimens that showed bacterial penetration fell into the slight and gross leakage categories. The previous test for bacterial passage did not statistically influence the fluid transport pattern of these roots which was measured subsequently. These findings indicate that fluids transport through obturated root canals, most of which do not allow the passage of bacteria.

Biological Transport↗

Evaluation of leakage of bacteria and endotoxins in teeth treated endodontically by two different techniques.

Root canal recontamination occurs after contact between oral-bacterial flora and the coronal extremity of the root canal. The aim of this study was to evaluate the time required for endotoxins and bacteria to penetrate through root-canal obturations performed with vertical and lateral gutta-percha condensation techniques. Specimens prepared by the two alternative methods were exposed to contaminated saliva, and leakage into the root was evaluated over time. None of the obturated roots was infiltrated by endotoxins after 31 days. On the contrary, between day 13 and day 37 bacteria had infiltrated all specimens.

Coloring Agents↗

Influence of coronal restorations on the periapical health of endodontically treated teeth.

The purpose of the study was to evaluate a possible relationship between the quality of the coronal restoration, the root canal obturation and the periapical status of endodontically treated teeth. Full mouth series of radiographs from randomly selected patient charts at the Dental Faculty, University of Oslo were examined. A total of 1001 endodontically treated teeth restored with a permanent restoration were evaluated independently by two examiners. According to a predetermined set of radiographic criteria, the technical quality of the root filling of each tooth was scored as either good (GE) or poor (PE), and the technical quality of the coronal restoration was scored as good (GR) or poor (PR). The root and the surrounding structures were then evaluated and according to the periradicular findings, the treatment was categorized as success or failure. The success rate for all endodontically treated teeth was 67.4% (n = 1001). Teeth with root canal posts had a success rate of 70.7% (n = 527) and teeth without posts had a success rate of 63.6% (n = 472). The two groups with technically good endodontics had the highest success rates. In combination with technically good restorations the success rate was 81% (GE + GR, 81%) and combined with technically poor restorations the success rate was 71% (GE + PR, 71%). The two groups with technically poor endodontics combined with either good restorations or poor restorations had significantly lower success rates (PE + GR, 56% and PE + PR, 57%). The technical quality of the endodontic treatment as judged radiographically was significantly more important than the technical quality of the coronal restoration when the periapical status of endodontically treated teeth was evaluated.

Chi-Square Distribution↗

Comparison of the quality of obturation following endosonic versus hand instrumentation.

This study was undertaken to compare the quality of root canal obturation following preparation by endosonic or hand instrumentation. Forty single-canal, extracted lower premolar teeth were selected. One group of 20 teeth was prepared using a standard step-back technique, the other 20 teeth were prepared with an ultrasonic machine. The groups were subdivided, with two operators preparing 10 teeth of each group. The teeth were obturated by a third operator using cold laterally condensed gutta percha. The root apices were then immersed in methylene blue dye for 48 h and the teeth sectioned longitudinally. Image analysis recorded the amount of sealer and void within the obturated canal. The linear distance of dye penetration was measured to provide an indication of apical seal. Examination of the root canal shape resulting from the different preparation techniques used was also undertaken. No significant difference was noted in the percentage of sealer and void present in the root canals obturated after endosonic or hand instrumentation. There was a slightly greater although not significant increase in the degree of linear penetration of dye in canals prepared endosonically. The endosonic technique used in this study appeared to produce a canal preparation of slightly less continuous taper than that obtained with hand preparation.

Analysis of Variance↗

Obturation of root canals in vivo with a new vacuum technique.

It was demonstrated in vitro that it is possible to achieve obturation of the root canal system with a system utilizing a reduced pressure of 15 hPa (15 mbar). The purpose of this study was to develop a procedure to reach a vacuum of at least 15 hPa within root canals in vivo. It was also determined if root canals could be obturated in daily practice with this vacuum technique. After hand instrumentation of the root canals a tooth was prepared for obturation of the canals with the new technique by obtaining a tightly fitting attachment to a vacuum pump. The result showed that it was possible in vivo to reach reduced absolute pressures of 10 hPa in roots and to fill the root canal system with the new system.

Dental Pulp Cavity↗

Radicular temperatures associated with thermoplasticized gutta-percha.

Thermoplasticized gutta-percha has been used to obturate root canals. The continuous wave of condensation technique uses the System B Heat Source with the choice of different-sized pluggers. The purpose of this study was to measure the temperatures within the root canal and on the root surface at different radicular levels while using the System B Heat Source. Fine, Fine-Medium, and Medium pluggers were evaluated at temperature settings of 200 degrees C, 250 degrees C, and 300 degrees C. The Obtura II gutta-percha delivery system following the manufacturer's instructions and ultrasonically thermoplasticized gutta-percha were used for comparative purposes. The highest mean temperature change on the internal root surface was 74.19 degrees C with the system B at the 6 mm level (6 mm coronal to working length) when the Fine-Medium plugger was set at 300 degrees C. The lowest mean temperature change on the internal root surface was 2.09 degrees C at the 0 mm level (at working length) when the F plugger was set at 200 degrees C. With the Obtura II, the lowest mean internal temperature change was 5.22 degrees C at the 0 mm level, whereas the highest mean internal temperature change was 26.63 degrees C at the 6 mm level. With ultrasonic lateral compaction the lowest mean internal temperature change was 5.01 degrees C at the 0 mm level, whereas the highest mean internal temperature change was 28.95 degrees C at the 6 mm level. At no time did the System B, the Obtura II, or ultrasonic delivery of warm gutta-percha exceed an increase of 10 degrees C at any thermocouple level on the external root surface.

Body Temperature↗