PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “SULFONAMIDE MIXTURES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

Universal response in liquid chromatography using charged aerosol detection.

A new, empirical approach is introduced to correct for the varying response of aerosol-based detectors with the varying composition of the mobile phase during gradient elution in HPLC. A Corona charged aerosol detector was used in the experiments. The detector is characterized by a nearly universal response at a given, constant mobile-phase composition for sufficiently nonvolatile analytes. A second pump was used to deliver an exactly inverse gradient compared to the analytical HPLC system, and both flows were mixed in a tee piece before introduction to the Corona detector. The approach proposed made it possible to extend the universal response from isocratic to gradient elution conditions in HPLC, vastly improving the usefulness of this detection technique. The constant response of the detector obtained in this way was first demonstrated in flow injection analysis. Very similar calibration curves were obtained for six sulfonamide drugs after mobile-phase compensation. The approach was also applied to gradient elution with excellent results. The data were characterized by good precision ranging from 4% RSD at 10 mg/L to 1.6% RSD at 780 mg/L. The average limit of detection with a 2-microL injection was 0.5 mg/L, corresponding to 1 ng injected on the column. The approach proposed allows quantification of unknown compounds, e.g., in pharmaceutical mixtures. Measurement of analytes at a relative concentration of 0.05% versus the main component is demonstrated.

Aerosols↗

Nimesulide-modified gum karaya solid mixtures: preparation, characterization, and formulation development.

Solid mixtures of nimesulide (NS) and modified gum karaya (MGK) were prepared to improve the dissolution rate of NS. The effect of drug-carrier ratio on dissolution rate of NS was investigated by preparing the solid mixtures of different ratios by cogrinding method. Solid mixtures were also prepared by physical mixing, kneading, and solid dispersion techniques to study the influence of method of preparation. Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), and equilibrium solubility studies were performed to explain the results of in vitro dissolution rate studies. It was clearly evident from the results that the NS dissolution rate was dependent on the concentration of MGK in the solid mixtures, and optimum weight ratio was found to be 1:4 (NS:MGK). Though the dissolution rate of NS from all solid mixtures prepared by different methods improved significantly, maximum improvement in dissolution rate was observed with solid dispersions. The order of methods basing on their effect on dissolution efficiency is solid dispersion > kneading > cogrinding > physical mixing > pure NS. Tablets of pure drug and solid mixtures (1:4 w/w, NS:MGK) were prepared. Though the best results from the dissolution test were obtained for the tablets containing solid dispersions, tablets containing cogrinding mixture were found to be suitable, from a practical point of view, for commercialization.

Adjuvants, Pharmaceutic↗

Determination of alcohol polyether average molar oligomer value/distribution via supercritical fluid chromatography coupled with UV and MS detection.

Supercritical fluid chromatography (SFC) was used for the analysis of ethoxylated and propoxylated surfactants. Samples were derivatized to phenylated silyl ethers with a disilazane-chlorosilane mixture. Addition of a phenyl group to the surfactant allowed UV-absorbance detection of each oligomer. Acetonitrile and methanol were evaluated as mobile phase modifiers. Better peak shape was realized with methanol-modified CO2 on an octadecyl silica bonded phase than with acetonitrile-modified CO2. Peak assignments were made via SFC coupled with electrospray ionization-mass spectrometry (ESI-MS) in the positive ion mode. A sulfonamide-embedded alkyl stationary phase was also evaluated for separation of the derivatized samples. SFC-UV and SFC-ESI-MS data were jointly used for calculation of average molar oligomer values which were then compared to values calculated from 1H NMR data of non-derivatized samples. The derivatization or separation method using the sulfonamide embedded phase required no preliminary cleanup and yielded reproducible oligomer values that were consistent with those of the manufacturer's nominal values.

Alcohols↗

Potentiation of sulphadimidine by 2,4-diaminopteridines and other 6,7-disubstituted 2,4-diaminopteridines against Eimeria infections of chicks.

Six 2,4-diaminopteridines substituted in the 6 and 7 positions were tested as potentiators of sulphadimidine against Eimeria tenella. 2,4-Diamino-6,7-di-isopropylpteridine and 2,4-diamino-1'-propylindolo(2',3':6,7)pteridine were selected for further study. Both potentiated sulphadimidine against E. tenella and the di-isopropylpteridine potentiated it against E. necatrix. A 10% mixture of the di-isopropylpteridine with sulphadimidine (or other sulphonamides) appears to offer advantages in the treatment of E. tenella and still more of E. necatrix.

Animals↗

Cyclooxygenase-2 in cancer cells and macrophages induces colon cancer cell growth by cigarette smoke extract.

Cigarette smoking, cyclooxygenase-2 (COX-2) and macrophages are independently associated with colorectal cancer. In the present study, cigarette smoke ethanol extract was applied to colon cancer cells (SW1116) or indirectly via activated macrophages (THP-1 cells) to attest their effects on cancer cell proliferation and tumor growth both in vitro and in vivo. Ethanol extract induced COX-2 expression in SW1116 and THP-1 cells. Combination of THP-1 pre-incubated medium and ethanol extract further potentiated COX-2 expression and proliferation of SW1116 cells. Tumor growth in nude mice was positively associated with the medium and/or ethanol extract treatments, together with the up-regulation of cell proliferation and angiogenesis, and down-regulation of apoptosis. Application of a COX-2 inhibitor (SC236) reduced tumor growth as well as cell proliferation and angiogenesis. These actions are partially depended on the decrease of COX-2 expression. Taken together, inhibition of COX-2 activity may have significant implication to prevent colon cancer in smokers.

Animals↗

Quantitative chemical proteomics for identifying candidate drug targets.

We have developed a systematic strategy for drug target identification. This consists of the following sequential steps: (1) enrichment of total binding proteins using two differential affinity matrixes upon which are immobilized positive and negative chemical structures for drug activity, respectively; (2) covalent labeling of the proteins with a new cleavable isotope-coded affinity tag (ICAT) reagent, followed by proteolysis of the combined proteins; (3) isolation, identification, and relative quantification of the tagged peptides by liquid chromatography-mass spectrometry; (4) array-based transcription profiling to select candidate proteins; and (5) confirmation of direct interaction between the activity-associated structure and the selected proteins by using surface plasmon resonance. We present a typical application to identify the primary binding protein of a novel class of anticancer agents exemplified by E7070. Our results suggest that this approach provides a new aspect of quantitative proteomics to find specific binding proteins from protein mixture and should be applicable to a wide variety of biologically active small molecules with unidentified target proteins.

Antineoplastic Agents↗

Primus (florasulam 50 G/L), a new triazolopyrimidine sulfonanilide herbicide to control broad-leaved weeds in maize when applied in early postemergence (1 to 6 leaf stage of maize). Preliminary results.

OBJECTIVE: PRIMUS was developed in maize in Belgium in 1999 and 2000 in the course of research into limiting or replacing the use of triazines in maize. One of the imperatives of this research was to find the lowest possible residue content (MRL). SELECTIVITY TEST: An application of florasulam, at the dose of 5 g of active substance (a.s.) at the 2 to 3 leaf stage of the maize was found to be selective on 132 (in 1999) and 126 (in 2000) varieties of maize. EFFICACY TEST: Florasulam was tested at doses of between 1 and 5 g a.s./hectare. The treatments were applied in early postemergence at the 3-5 leaf stage of the maize or in 2 separate applications: at the 1 leaf stage with a dose of 2 g a.s. florasulam at the 4 leaf stage with a dose of 2 g a.s. florasulam The herbicide was fully effective on the sensitive flora. A summary of the results is presented. A detailed weed spectrum is defined. PROGRAMMES: Herbicide programmes were developed on the basis of these findings. The results showed that the best partners for florasulam were triketones (sulcotrione and mesotrione) in very low doses. Sulcotrione was applied at doses of 75 to 150 g a.s./ha and mesotrione at 25 to 50 g a.s./ha. Triple mixes of florasulam + triketone + nicosulfuron in very low doses and 1 or 2 applications were also tested. The results were highly encouraging and this work should lead to practical recommendations. PHYTOTOXICITY: Phytotoxicity was observed on some occasions. The phytotoxicity results for the different figures seem, however, to depend more on the climate (difference between daytime and night-time temperatures just before and after the treatment) than on the products tested in the mixes. However, the florasulam + nicosulfuron (sulfonyl-urea antigrasses) may sometimes cause serious problems with selectivity. The phytotoxicity noted in the tests was usually short-lived (30 days). CONCLUSION: The results of the tests show that it is possible to consider replacing atrazine-based programmes with very low doses of modern herbicides applied at early stages of the maize. A mixture of active substances is vital. Repeated very low doses at the 1/2 and 4/5 leaf stages of the maize were found to be the most effective.

Cyclohexanones↗

Synthesis and characterization of protein and polylysine conjugates of sulfamethoxazole and sulfanilic acid for investigation of sulfonamide drug allergy.

Conjugates of sulfamethoxazole (SMX) with human serum albumin (HSA), transferrin (TR), and poly(L-lysine) (PL, degrees of polymerization 16 and 430) have been prepared. As a model, succinylSMX-glycine methyl ester was synthesized by carbodiimide and active ester routes. The proteins and PL were acylated with succinylSMX succinimido ester, affording conjugates (succinylSMX)2-21-HSA, (succinylSMX)17,27-TR, (succinylSMX)11-Lys16, and (succinylSMX)71-Lys430 in which SMX was linked by a spacer chain of four carbons. This represents substitution of up to 35, 46, 65, and 17% of the amino groups of HSA, TR, PL16, and PL430, respectively. HSA was also acylated with the succinimido esters of succinylSMX-glycine and succinylSMX-epsilon-aminohexanoic acid, affording conjugates (succinylSMX-Gly)53-HSA and (succinylSMX-epsilon-NH2hex)51-HSA. In these conjugates SMX was linked by a spacer chain of 7 and 11 carbons, respectively, and almost all the amino groups of HSA were substituted. Factors apparently influencing the extent of conjugation to HSA were the stability of the active ester and the solubility of the conjugation reaction mixture. A sulfanilic acid (SA) conjugate, containing 12 mol of ligand/mol of HSA, was also prepared. The route of synthesis involved acylation of HSA with sulfanilyl fluoride. N-epsilon-Sulfanilyl-L-lysine dihydrochloride, required for quantitation of bound SA, was synthesized by a new route starting from alpha-Boc-L-lysine. Conjugates (sulfanilyl)12-HSA and (succinylSMX)13-HSA, differing in molecular weight from HSA by only 2.6 and 6.5%, were distinguishable from HSA by gel-filtration HPLC, as were the more highly substituted conjugates from their respective unsubstituted materials.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acids↗

Validation of a screening method based on liquid chromatography coupled to high-resolution mass spectrometry for analysis of perfluoroalkylated substances in biota.

A screening method for analysis of perfluoroalkylated substances (PFAS) in biota samples has been developed and validated using liver samples from polar cod (Boreogadus saida) and glaucous gull (Larus hyperboreus). The method was based on extraction of target compounds from homogenised samples into the solvent mixture used as mobile phase in high-performance liquid chromatography (HPLC), i.e. methanol/water (50:50; 2 mM ammonium acetate). The extract was filtered and directly injected into a HPLC/time-of-flight mass spectrometry (TOF-MS) system. Quantification was performed using 7H-perfluoroheptanoic acid as internal standard and a calibration standard solution dissolved in sample extract for each matrix type (matrix-matched calibration standard). The method is very time and cost efficient. Except for long-chain compounds and perfluorooctane sulfonamide (which cannot be covered by this method), recoveries were between 60% and 115% and method detection limits were in the range 0.04-1.3 ng/g wet weight. Blank values could be neglected with the exception of perfluorooctane sulfonate (PFOS), perfluorohexanoic acid (PFHxA) and perfluorooctanoic acid (PFOA). One of the major challenges in PFAS analysis is ionisation disturbance by co-eluting matrix in the ion source of the mass spectrometer. Both matrix and analyte specific signal enhancement and suppression was observed and quantified. Repeated extractions (n = 3) gave relative standard deviations (RSD) <35% for all PFAS. Accuracy was examined by comparing the screening method to the generally applied ion pair extraction (IPE) method. PFAS concentration values of a glaucous gull liver sample deviated by less than 30% for the two methods, provided that matrix-matched calibration standards were employed in both methods.

Alkanesulfonic Acids↗

Identification of sulI allele of dihydropteroate synthase by representational difference analysis in Haemophilus parasuis serovar 2.

AIMS: Identification of genes differentially present in Haemophilus parasuis serovar 2 by representational difference analysis (RDA). METHODS AND RESULTS: Bacterial genomic DNA was extracted, cleaved with Sau3AI and ligated to oligonucleotide adapter pair. The optimal tester (H. parasuis serovar 2)/driver ratio (H. parasuis serovars 1, 3 and 5) for the hybridization was established and the mixture was hybridized, and amplified by PCR. The products were cloned and transformed into Escherichia coli TOP10 cells and checked for specificity by Southern blotting analysis. The RDA subtractive technique yielded six bands ranging from 1500 to 200 bp, which were cloned into pCR II-TOPO vector and 40 clones were analysed. A fragment of 369 bp was specific for H. parasuis serovar 2, and showed 99% homology to sulI gene encoding for dihydropteroate synthase (dhps). The dhps gene conferring sulfonamide resistance was detected in H. parasuis serovar 2 but was absent in serovars 1, 3, 5 and in most of the Actinobacillus pleuropneumoniae serotypes (except serotype 7). CONCLUSION: sulI allele of dihydropteroate synthase has been identified in H. parasuis serovar 2 by RDA technique. SIGNIFICANCE AND IMPACT OF THE STUDY: The RDA technique seems to be an useful method for the identification of genes that are differentially present in H. parasuis, a respiratory pathogen of veterinary interest.

Alleles↗

Rapid and sensitive HPLC method for the simultaneous determination of dorzolamide hydrochloride and timolol maleate in eye drops with diode-array and UV detection.

A rapid and sensitive HPLC method has been developed for the simultaneous determination of dorzolamide hydrochloride and timolol maleate. The drugs were monitored with a diode-array detector at two fixed wavelengths (lambda = 250.0 nm for dorzolamide hydrochloride and 300.0 nm for timolol maleate). Liquid chromatography was performed on a RP-YMC pack ODS A-132 C18 (5 microm, 15 cm x 6.0 mm) column and the mobile phase consisted of an acetonitrile: phosphate buffer (pH 2.5): methanol (5:85:10 v/v/v) mix and a flow rate of 1.2 ml x min(-1). The linearity of the method ranged between 4.0-45.0 microg x ml(-1) for dorzolamide hydrochloride and and 2.0-20.6 microg x ml(-1) for timolol maleate in binary mixture. The procedure was successfully applied to the determination of these compounds in pharmaceutical preparations and gave a high recovery, good accuracy and precision without any interference by the excipients.

Adrenergic beta-Antagonists↗

Hydrogen bond directed highly regioselective palladium-catalyzed allylic substitution.

The palladium-catalyzed allylic substitution of 5-vinyloxazolidinones and derivatives was investigated. Unusual and high regioselectivity for the branched product was observed. The regioselectivity was influenced by the type of substrate, the solvents, and the nucleophile. Imide-type nucleophiles were found to be directed to the internal carbon (branched:linear, 75:25 to >98:2), whereas sulfonamides, amines, and malonates added only to the terminal carbon of the allyl complex. Relatively nonpolar solvents such as toluene and THF favored the branched product (97:3 and 95:5, respectively). Acetonitrile and dichloromethane afforded lower regioselectivity (50:50 and 67:33, respectively), and the use of the protic solvent ethanol resulted in reversal of the regioselectivity (12:88). The directing group on the substrate was important. Amides afforded almost complete formation of the branched product, and carbamates gave a 50:50 mixture of regioisomers with phthalimide as the nucleophile. Evidence for direction of the nucleophile via hydrogen bonding was obtained by replacing the hydrogen of the amide with a methyl, resulting in the production of only the normal linear product.

Allyl Compounds↗

Chemiluminescent and bioluminescent techniques.

Light-emitting chemical reactions (chemiluminescence, CL) and biological reactions (bioluminescence, BL) have a diverse range of analytical applications but relatively few have been adopted by routine clinical laboratories. Advantages of CL and BL assays include sensitivity (attomole and sub-attomole detection limits), speed (signal generated in a few seconds and in some cases stable for several hours), nonhazardous reagents, and simple procedures. The most promising clinical applications are in immunoassay, protein blotting, and DNA probe assays. Chemiluminescent molecules exploited as labels include luminol, isoluminol, acridinium esters, thioesters and sulfonamides, and phenanthridinium esters. Separation and nonseparation assays have been devised, based on isoluminol and acridinium ester labels. The combination of the amplification properties of an enzyme and a CL or BL detection reaction provides a highly sensitive analytical system. Since 1983, CL and BL methods have been developed for many enzyme labels, e.g., alkaline phosphatase, glucose-6-phosphate dehydrogenase, horseradish peroxidase, Renilla luciferase, and xanthine oxidase. Currently, the most successful enzyme assays are the enhanced CL method for a peroxidase label involving a mixture of luminol, hydrogen peroxide, and an enhancer (e.g., p-iodophenol) and the direct CL method for alkaline phosphatase, with an adamantyl 1,2-dioxetane phenyl phosphate as substrate. Both systems are very sensitive (the detection limit for alkaline phosphatase when using the dioxetane reagent is 0.001 amol) and produce long-lived light emission (greater than 30 min), which is ideal for membrane applications in which light emission is detected with photographic film or a charge-coupled device camera.

Blotting, Western↗

Analysis of sulphonamides using supercritical fluid chromatography and supercritical fluid chromatography-mass spectrometry.

Packed-column supercritical fluid chromatography has been used for the separation of mixtures of sulphonamides on silica and amino-bonded stationary phases utilizing carbon dioxide with methanol modifier as the mobile phase. The effect of modifier concentration, column pressure and modifier identity on retention was also studied. Packed-column supercritical fluid chromatography-mass spectrometry (SFC-MS) of these mixtures utilizing both moving-belt and modified thermospray interfaces was also studied. The identification of sulphamethazine in a spiked porcine kidney extract was performed by SFC-MS using the moving-belt interface.

Animals↗

Neutralization of the haemorrhagic activities of viperine snake venoms and venom metalloproteinases using synthetic peptide inhibitors and chelators.

Envenoming by the West African saw-scaled viper, Echis ocellatus resembles that of most vipers, in that it results in local blistering, necrosis and sometimes life-threatening systemic haemorrhage. While effective against systemic envenoming, current antivenoms have little or no effect against local tissue damage. The major mediators of local venom pathology are the zinc-dependant snake venom metalloproteinases (SVMPs). The high degree of structural and functional homology between SVMPs and their mammalian relatives the matrix metalloproteinases (MMPs) suggests that substrate/inhibitor interactions between these subfamilies are likely to be analogous. In this study, four recently developed MMP inhibitors (MMPIs) (Marimastat, AG-3340, CGS-270 23A and Bay-12 9566) are evaluated in addition to three metal ion chelators (EDTA, TPEN and BAPTA) for their ability to inhibit the haemorrhagic activities of the medically important E. ocellatus venom and one of its haemorrhagic SVMPs, EoVMP2. As expected, the metal ion chelators significantly inhibited the haemorrhagic activities of both whole E. ocellatus venom and EoVMP2, while the synthetic MMPIs show more variation in their efficacies. These variations suggest that individual MMPIs show specificity towards SVMPs and that their application to the neutralization of local haemorrhage may require a synthetic MMPI mixture, ensuring that a close structural component for each SVMP is represented.

Animals↗

Stability-indicating methods for the determination of doxazosin mezylate and celecoxib.

Two stability-indicating methods were developed for the determination of doxazosin mesylate (I) and celecoxib (II) in the presence of their degradation products. The first method depends on the use of first derivative spectrophotometry (D(1)) at 256, 269 nm for (I) and (II), respectively. This method determines (I) and (II) in concentration ranges of 0.8-12 and 1-20 microg ml(-1) with mean percentage accuracies of 99.21+/-0.88 and 99.59+/-1.67% for (I) and (II), respectively. The second method depends on the quantitative densitometric evaluation of thin-layer chromatography of (I) and (II) in the presence of their degradation products without any interference. Methylisobutyl ketone-glacial acetic acid-water (20:10:10) was used as a mobile phase for (I) and cyclohexane-dichloromethane-diethyleamine (50:40:10) for (II). The chromatograms were scanned at 248 and 253 nm for (I) and (II), respectively. This method determines (I) and (II) in concentration ranges of l-4 microg per spot for both drugs with mean percentage accuracies of 100.19+/-0.95 and 99.91+/-1.95% for (I) and (II), respectively. The suggested methods were used to determine doxazosin mesylate and celecoxib in bulk powder, laboratory-prepared mixtures and pharmaceutical dosage forms (cardura tablet and celebrex capsule). The results obtained by applying the proposed methods were statistically analysed and compared with those obtained by the reported methods.

Adrenergic alpha-Antagonists↗

Formulation design of self-microemulsifying drug delivery systems for improved oral bioavailability of celecoxib.

Celecoxib is a hydrophobic and highly permeable drug belonging to class II of biopharmaceutics classification system. Low aqueous solubility of celecoxib leads to high variability in absorption after oral administration. Cohesiveness, low bulk density and compressibility, and poor flow properties of celecoxib impart complications in it's processing into solid dosage forms. To improve the solubility and bioavailability and to get faster onset of action of celecoxib, the self-microemulsifying drug delivery system (SMEDDS) was developed. Composition of SMEDDS was optimized using simplex lattice mixture design. Dissolution efficiency, t(85%), absorbance of diluted SMEDDS formulation and solubility of celecoxib in diluted formulation were chosen as response variables. The SMEDDS formulation optimized via mixture design consisted of 49.5% PEG-8 caprylic/capric glycerides, 40.5% mixture of Tween20 and Propylene glycol monocaprylic ester (3:1) and 10% celecoxib, which showed significantly higher rate and extent of absorption than conventional capsule. The relative bioavailability of the SMEDDS formulation to the conventional capsule was 132%. The present study demonstrated the suitability of mixture design to optimize the compositions for SMEDDS. The developed SMEDDS formulations have the potential to minimize the variability in absorption and to provide rapid onset of action of celecoxib.

Administration, Oral↗

[Intraocular pressure in rabbits after administration of 10% L-arginine HCl in 2% Trusopt].

In this contribution publish the observation that addition of 10% L-arginin.HCl to the 2% Trusopt eye drops intensifies activity of antiglaucomatics with an important reduction of the normal intraocular pressure (IOP) in rabbits New Zealand white namely from 15 up to 240 minutes, compared with application of both substance alone. Size of the pupil was not affected. Based on our experimental results we assume that this increasing activity of Trusopt mixture with amino acid L-arginin.HCl created a new metabolite. According to our observations this metabolite caused reduction of the humor aqueous production and together with the increased of the uveo-scleral outflow leads to the striking reduction of the IOP.

Animals↗