SEARCH · PubMed Health

Results for “Solvent accessibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

PubMed1995

The optimization of protein-solvent interactions: thermostability and the role of hydrophobic and electrostatic interactions.

Protein-solvent interactions were analyzed using an optimization parameter based on the ratio of the solvent-accessible area in the native and the unfolded protein structure. The calculations were performed for a set of 183 nonhomologous proteins with known three-dimensional structure available in the Protein Data Bank. The dependence of the total solvent-accessible surface area on the protein molecular mass was analyzed. It was shown that there is no difference between the monomeric and oligomeric proteins with respect to the solvent-accessible area. The results also suggested that for proteins with molecular mass above some critical mass, which is about 28 kDa, a formation of domain structure or subunit aggregation into oligomers is preferred rather than a further enlargement of a single domain structure. An analysis of the optimization of both protein-solvent and charge-charge interactions was performed for 14 proteins from thermophilic organisms. The comparison of the optimization parameters calculated for proteins from thermophiles and mesophiles showed that the former are generally characterized by a high degree of optimization of the hydrophobic interactions or, in cases where the optimization of the hydrophobic interactions is not sufficiently high, by highly optimized charge-charge interactions.

Bacterial Proteins↗

PubMed2002

[Structures of peptides related to the inactivation gate on sodium channels].

The peptides related to inactivation of sodium channels were synthesized by the solid-phase method for the purpose of proposing a more precise concept than so far obtained for the inactivation and to determine the main factors that control inactivation. The three-dimensional structures of the peptides were determined using 1H-NMR spectroscopy. It was newly discovered that hydrogen bonding was formed between the amide proton of Ile in the IFM (IFM1488-1490) motif of the III-IV linker and the hydroxyl oxygen atom of the side chain of Thr located adjacent to the IFM motif. This hydrogen bonding characterizes the structure around the IFM motif. By calculating the solvent-accessible surface area of the peptide corresponding to the III-IV linker, it was found that a hydrophobic cluster was formed. The hydrophobic cluster stabilizes the structure of the IFM motif. Moreover, the solvent-accessible surface area of the IFM motif correlated with the sustained currents of the incompletely inactivated sodium channels. The free energy of stabilization by hydrophobic interactions (delta G, -3.9 kcal mol-1), which is calculated from the solvent-accessible surface area for the IFM motif (195 A2), was in good agreement with that calculated for the equilibrium between the open and the inactivated states of the sodium channels (-4.1 kcal mol-1). The structure of the III-IV linker peptide in a phosphate buffer also formed a hydrophobic cluster, as well as in SDS micelles, although no hydrogen bonding was formed. This distinction results in the following conformational change in the IFM motif: in SDS micelles, the side chains of Ile and Phe in the IFM motif were directed to the hydrophobic cluster, whereas those in a phosphate buffer were directed opposite to the cluster and solvent exposed. The secondary structures of IIIS4-S5 and IVS4-S5, which are considered to form a receptor site, assumed alpha-helical conformations around the N-terminal half of the sequences. The residue A1329 in MPD3, which is considered to interact with F1489 of the IFM motif, was found to locate within the alpha-helix. A hydrophobic cluster was formed on one side of the helix of MP-D4, which also plays an important role in the inactivation. A new concept for the process of fast inactivation is presented. In response to the voltage-dependent activation and the movement of the S4 segments, the two hydrophobic clusters due to the IVS4-S5 and the III-IV linker interact with each other. This interaction increases the hydrophobicity around the IFM motif. The increased hydrophobicity causes the conformational switching of the IF1488-1489 residues to allow F1489 to interact with A1329 of IIIS4-S5 and/or with N1662 in IVS4-S5. As a consequence of this process, the inactivation gate closes.

Amino Acid Motifs↗

PubMed1986

Methionyl-tRNA synthetase induced 3'-terminal and delocalized conformational transition in tRNAfMet: steady-state fluorescence of tRNA with a single fluorophore.

Five species of tRNAfMet labeled with a single fluorophore are prepared to analyze the conformational changes at the 3'-end, at dihydrouridine, and at thiouridine in tRNAfMet upon binding of methionyl-tRNA synthetase. The emission and excitation spectra, anisotropy, and solvent accessibility of the fluorophore in each of the modified tRNAfMet's are determined in the absence and presence of methionyl-tRNA synthetase. The results are consistent with the following. The probes at the 3'-end are in a nonpolar environment, mobile relative to the tRNA molecule, and fully exposed to the solvent. The probes at dihydrouridine are partially stacked over the neighboring bases, nearly immobile, and relatively inaccessible. The S8-C13 cross-linked product is rigid. Upon binding of methionyl-tRNA synthetase, the probes at the 3'-terminus become localized in a less polar environment, highly immobilized, and effectively shielded against solvent access, while the probes at dihydrouridine appear to be partially unstacked from the neighboring base and become slightly more accessible for solvent. Singlet-singlet energy transfer between the intrinsic protein fluorescence and the fluorophores in modified tRNA's was observed by sensitized emission for tRNAfMet modified at the 3'-end and for S8-C13 but not for tRNAfMet's modified at dihydrouridine. These results suggest that dihydrouridine in tRNAfMet is oriented away from methionyl-tRNA synthetase in the tRNA-enzyme complex.

Amino Acyl-tRNA Synthetases↗

PubMed2003

Amino acid empirical contact energy definitions for fold recognition in the space of contact maps.

BACKGROUND: Contradicting evidence has been presented in the literature concerning the effectiveness of empirical contact energies for fold recognition. Empirical contact energies are calculated on the basis of information available from selected protein structures, with respect to a defined reference state, according to the quasi-chemical approximation. Protein-solvent interactions are estimated from residue solvent accessibility. RESULTS: In the approach presented here, contact energies are derived from the potential of mean force theory, several definitions of contact are examined and their performance in fold recognition is evaluated on sets of decoy structures. The best definition of contact is tested, on a more realistic scenario, on all predictions including sidechains accepted in the CASP4 experiment. In 30 out of 35 cases the native structure is correctly recognized and best predictions are usually found among the 10 lowest energy predictions. CONCLUSION: The definition of contact based on van der Waals radii of alpha carbon and side chain heavy atoms is seen to perform better than other definitions involving only alpha carbons, only beta carbons, all heavy atoms or only backbone atoms. An important prerequisite for the applicability of the approach is that the protein structure under study should not exhibit anomalous solvent accessibility, compared to soluble proteins whose structure is deposited in the Protein Data Bank. The combined evaluation of a solvent accessibility parameter and contact energy allows for an effective gross screening of predictive models.

Amino Acids↗

PubMed1992

Fusarium solani cutinase is a lipolytic enzyme with a catalytic serine accessible to solvent.

Lipases belong to a class of esterases whose activity on triglycerides is greatly enhanced at lipid-water interfaces. This phenomenon, called interfacial activation, has a structural explanation: a hydrophobic lid, which at rest covers the catalytic site, is displaced on substrate or inhibitor binding and probably interacts with the lipid matrix. Fusarium solani pisi cutinase belongs to a group of homologous enzymes of relative molecular mass 22-25K (ref. 7) capable of degrading cutin, the insoluble lipid-polyester matrix covering the surface of plants, and hydrolysing triglycerides. Cutinases differ from classical lipases in that they do not exhibit interfacial activation; they are active on soluble as well as on emulsified triglycerides. Cutinases therefore establish a bridge between esterases and lipases. We report here the three-dimensional structure of a recombinant cutinase from F. solani pisi, expressed in Escherichia coli. Cutinase is an alpha-beta protein; the active site is composed of the triad Ser 120, His 188 and Asp 175. Unlike other lipases, the catalytic serine is not buried under surface loops, but is accessible to solvent. This could explain why cutinase does not display interfacial activation.

Amino Acid Sequence↗

PubMed2004

A conformational change in heparan sulfate 3-O-sulfotransferase-1 is induced by binding to heparan sulfate.

The 3-O-sulfation of glucosamine by heparan sulfate 3-O-sulfotransferase-1 (3-OST-1) is a key modification step during the biosynthesis of anticoagulant heparan sulfate (HS). In this paper, we present evidence of a conformational change that occurs in 3-OST-1 upon binding to heparan sulfate. The intrinsic fluorescence of 3-OST-1 was increased in the presence of HS, suggesting a conformational change. This apparent conformational change was further investigated using differential chemical modification of 3-OST-1 to measure the solvent accessibility of the lysine residues. 3-OST-1 was treated with acetic anhydride in either the presence or absence of HS using both acetic anhydride and hexadeuterioacetic anhydride under nondenaturing and denaturing conditions, respectively. The relative reactivity of the lysine residues to acetylation and [2H] acetylation in the presence or absence of HS was analyzed by measuring the ratio of acetylated and deuterioacetylated peptides using matrix-assisted laser desorption ionization mass spectrometry. The solvent accessibilities of the lysine residues were altered differentially depending on their location. In particular, we observed a group of lysine residues in the C-terminus of 3-OST-1 that become more solvent accessible when 3-OST-1 binds to HS. This observation indicates that a conformational change could be occurring during substrate binding. A truncated mutant of 3-OST-1 that lacked this C-terminal region was expressed and found to exhibit a 200-fold reduction in sulfotransferase activity. The results from this study will contribute to our understanding of the interactions between 3-OSTs and HS.

Amino Acid Substitution↗

PubMed2004

Analysis and prediction of DNA-binding proteins and their binding residues based on composition, sequence and structural information.

MOTIVATION: Though vitally important to cell function, the mechanism of protein-DNA binding has not yet been completely understood. We therefore analysed the relationship between DNA binding and protein sequence composition, solvent accessibility and secondary structure. Using non-redundant databases of transcription factors and protein-DNA complexes, neural network models were developed to utilize the information present in this relationship to predict DNA-binding proteins and their binding residues. RESULTS: Sequence composition was found to provide sufficient information to predict the probability of its binding to DNA with nearly 69% sensitivity at 64% accuracy for the considered proteins; sequence neighbourhood and solvent accessibility information were sufficient to make binding site predictions with 40% sensitivity at 79% accuracy. Detailed analysis of binding residues shows that some three- and five-residue segments frequently bind to DNA and that solvent accessibility plays a major role in binding. Although, binding behaviour was not associated with any particular secondary structure, there were interesting exceptions at the residue level. Over-representation of some residues in the binding sites was largely lost at the total sequence level, but a different kind of compositional preference was observed in DNA-binding proteins.

Algorithms↗

PubMed1995

Conformational analysis of endothelin-1: effects of solvation free energy.

In order to investigate conformational preferences of the 21-residue peptide hormone endothelin-1 (ET-1), an extensive conformational search was carried out in vacuo using a combination of high temperature molecular dynamics/annealing and a Monte Carlo/minimization search in torsion angle space. Fully minimized conformations from the search were grouped into families using a clustering technique based on rms fitting over the Cartesian coordinates of the atoms of the peptide backbone of the ring region. A wide range of local energy mining were identified even though two disulfide bridges (Cys1-Cys15 and Cys3-Cys11) constrain the structure of the peptide. Low energy conformers of ET-1 as a nonionized species in vacuo are stabilized by intramolecular interaction of the ring region (residues 1-15) with the tail (residues 16-21). Strained conformations for individual residues are observed. Conformational similarity to protein loops is established by matching to protein crystal structures. In order to assess the influence of aqueous environment on conformational preference, the electrostatic contribution to the solvation energy was calculated for ET-1 as a fully ionized species (Asp8, Lys9, Glu10, Asp18, N- and C-terminus) using a continuum electrostatics model (DelPhi) for each of the conformers generated in vacuo, and the total solvation free energy was estimated by adding a hydrophobic contribution proportional to solvent accessible surface area. Solvation dramatically alters the relative energetics of ET-1 conformers from that calculated in vacuo. Conformers of ET-1 favored by the electrostatic solvation energy in water include conformers with helical secondary structure in the region of residues 9-15. Perhaps of most importance, it was demonstrated that the contribution to solvation by an individual charge depends not only on its solvent accessibility but on the proximity of other charges, i.e., it is a cooperative effect. This was shown by the calculation of electrostatic solvation energy as a function of conformation with individual charges systematically turned "on" and "off". The cooperative effect of multiple charges on solvation demonstrated in this manner calls into question models that relate solvation energy simply to solvent accessibility by atom or residue alone.

Amino Acid Sequence↗

PubMed2005

Amino acid architecture and the distribution of polar atoms on the surfaces of proteins.

We propose that a necessary condition for a protein to be soluble is the absence of large hydrophobic patches on its solvent-accessible surface, which can cause aggregation to occur. We note that the polar nature of the backbone of all amino acids guarantees a minimum polar content and hence can interrupt such patches. As a result, a carefully conserved detailed atomic placement of residues on the protein surface is not necessary for solubility. In order to demonstrate this, we construct a measure based on the average hydrophobicity of a simply defined patch. We use this measurement to compare surfaces that exhibit a clear difference in their solubility properties, namely, a) the solvent accessible surfaces for a set of homo-dimers and the surfaces buried in their interfaces and b) for a set of monomers the surfaces of fragments of secondary structure which are solvent accessible/inaccessible. Having demonstrated a difference in the first set of distributions, we characterize the solvent accessible surfaces of monomeric proteins. To test if cooperative behavior occurs between the atoms for these surfaces, we construct a set of randomized surfaces, which obey a very simple stereochemical constraint. We find that the observed and randomized distributions are much more similar than the previous sets we examined. This implies that while surfaces of soluble proteins must have sufficient polar content, the relative placement of atoms of one amino acid with respect to the atoms of neighboring amino acid need not be finely tuned, which provides an innate robustness for protein design and folding.

Amino Acids↗

PubMed2004

Filtering remote homologues using predicted structural information.

Finding homologues for a given protein plays a major role in predicting the protein's structure and function. However, it is still difficult to find remote homologues with low sequence similarity, even with advanced sequence search methods. We propose a simple filtering method that uses predicted structural information, pertaining to secondary structures and solvent accessibilities. It filters the more promising homologues from the many candidate proteins obtained by PSI-BLAST with a less stringent threshold E-value. The final decision is made by a simple linear discrimination method, considering the E-value of PSI-BLAST and the statistical significance scores of structural matches. An in-house neural network program is used for the prediction of secondary structures and solvent accessibilities for both the query and library proteins. The performance of our filtering method was evaluated by the cross-validation method, using the SCOP superfamily relationship as the correct standard. Coverage-reliability plots show that our filtering method clearly improves the performance of PSI-BLAST. The secondary structure improves PSI-BLAST better than the solvent accessibilities, but the combination of these two features with PSI-BLAST leads to the best result. The advantage of our method is its easy implementation with fewer parameters to be tuned and faster computation. We also discuss its performance with predicted and observed secondary structures.

Algorithms↗

PubMed2006

Revisiting the Voronoi description of protein-protein interfaces.

We developed a model of macromolecular interfaces based on the Voronoi diagram and the related alpha-complex, and we tested its properties on a set of 96 protein-protein complexes taken from the Protein Data Bank. The Voronoi model provides a natural definition of the interfaces, and it yields values of the number of interface atoms and of the interface area that have excellent correlation coefficients with those of the classical model based on solvent accessibility. Nevertheless, some atoms that do not lose solvent accessibility are part of the interface defined by the Voronoi model. The Voronoi model provides robust definitions of the curvature and of the connectivity of the interfaces, and leads to estimates of these features that generally agree with other approaches. Our implementation of the model allows an analysis of protein-water contacts that highlights the role of structural water molecules at protein-protein interfaces.

Binding Sites↗

PubMed2004

Factors governing the protonation state of Zn-bound histidine in proteins: a DFT/CDM study.

We have performed systematic theoretical studies to elucidate the factors governing the His protonation/deprotonation state in Zn-binding sites, especially those containing the ubiquitous Zn-His-Asp/Glu triad. Specifically, we have addressed the following three questions: (1) How does the transfer of the Zn-bound His imidazole proton to the second-shell Asp/Glu carboxylate oxygen depend on the composition of the other first-shell ligands and the solvent accessibility of the metal-binding site? (2) Can any second-shell ligand with a proton acceptor group such as the backbone carbonyl oxygen also act as a proton acceptor? (3) What is the effect of the Asp/Glu in the Zn-His-Asp/Glu triad on the Zn-bound water protonation state? To address these questions, we used a combination of quantum mechanical and continuum dielectric methods to compute the free energies for deprotonating a Zn-bound imidazole/water in various Zn complexes. The calculations show that whether the Zn-bound His is protonated or deprotonated depends on (1) the solvent accessibility of the metal-binding site, and (2) the Lewis acid ability of Zn, which is indirectly determined by both the first- and the second-shell Zn ligands. The calculations also show that the effect of the Zn-His-Asp/Glu interaction on the nucleophilicity of the Zn-bound water depends on the solvent accessibility of the catalytic Zn site. Furthermore, they show that the Asp/Glu side chain in the Zn-His-Asp/Glu triad can increase the negative charge of its partner, His, and create an anionic hole that may stabilize a cation in buried cavities, provided that the Zn complex is cationic/neutral. The findings of this work are in accord with available experimental data.

Binding Sites↗

PubMed2004

Multivariate analysis of the selectivity for a pentachlorophenol-imprinted polymer.

A pentachlorophenol (PCP)-imprinted polymer (MIP) was obtained by thermal polymerization of a mixture of template, 4-vinylpyridine and ethylene glycol dimethacrylate with molar ratio 1 +3 + 27, using as porogenic solvent methanol-water ( 3 + 1(v/v)). The polymer was packed in an HPLC column and selectivity towards 52 PCP-related phenols (22-chloro-, 21-alkyl-, 4-aryl-, 3-methoxy- and 6-polyphenols) was measured using acetonitrile-acetic acid (99 + 1(v/v)) as mobile phase. The same was made for a reference polymer obtained without pentachlorophenol (NIP). The molecular recognition properties of the imprinted polymer were expressed in terms of selectivity index (SI), calculated for each phenol as k(NIP)/k(MIP). Sixteen molecular descriptors were calculated for each molecule: qO, the partial charge of the phenolic oxygen atom; qH, the partial charge of the phenolic hydrogen atom; Deltaq, the absolute value of the difference qO - qH; HOMO, the highest occupied molecular orbital; LUMO, the lowest unoccupied molecular orbital; Deltaorb, absolute value of the difference HOMO - LUMO; micro(2), the square of total dipole moment; MW, the molecular weight; SAS, the solvent-accessible molecular surface area; hSAS, the hydrophobic solvent-accessible molecular surface area; Svdw, the van der Waals molecular surface area; hSvdw, the hydrophobic part of Svdw; MOv, the molecular ovality; RG, the radius of gyration; logP, the logarithm of n-octanol-water partition coefficient; pK, the phenolic dissociation constant. Correlations between selectivity index and these descriptors were searched utilizing multivariate principal component analysis (PCA). The multivariate model obtained by regression on the principal components correlate collectively several of the calculated descriptors with the polymer selectivity. The magnitude of the model's parameters shows that selectivity is strongly influenced by molecular descriptors having structural character, such as MW, hSvdw and logP, while the effect of molecular descriptors having electronic character, such as qO and pK, is much less marked.

Multivariate Analysis↗

PubMed2005

The nucleotide-binding site of the Escherichia coli DnaC protein: molecular topography of DnaC protein-nucleotide cofactor complexes.

The structure of the nucleotide-binding site of the Escherichia coli replication factor DnaC protein and the effect of the nucleotide cofactor on the protein structure have been examined using ultraviolet, steady-state, and time-dependent fluorescence spectroscopy. Emission spectra and quenching studies of the fluorescent nucleotide analogs, 3'-O-(N-methylantraniloyl)-5'-triphosphate (MANT-ATP) and 3'-O-(N-methylantraniloyl)-5'-diphosphate (MANT-ADP), bound to the DnaC protein indicate that the nucleotide-binding site forms a hydrophobic cleft on the surface of the protein. Fluorescence decays of free and bound MANT-ATP and MANT-ADP indicate that cofactors exist in two different conformations both, free and bound to the protein. However, the two conformations of the bound nucleotides differ in their solvent accessibilities. Moreover, there are significant differences in the solvent accessibility between ATP and ADP complexes. Specific binding of magnesium to the protein controls the structure of the binding site, particularly, in the case of the ATP complex, leading to additional opening of the binding site cleft. Both tyrosine and tryptophan residues are located on the surface of the protein. The tryptophans are clustered at a large distance from the nucleotide-binding site. However, in spite of a large spatial separation, binding of both cofactors induces significant and different changes in the structure of the environment of tryptophans, indicating long-range structural effects through the DnaC molecule. Moreover, only ATP induces changes in the distribution of the tyrosine residues on the surface of the protein. The data reveal that the nucleotide-DnaC protein complex is a sophisticated allosteric system, responding differently to the ATP and ADP binding.

Adenosine Diphosphate↗

PubMed2004

GSSI, a general model for solute-solvent interactions. 1. Description of the model.

A novel, semiempirical approach for the general treatment of solute-solvent interactions (GSSI) was developed to enable the prediction of solution-phase properties (e.g., free energies of desolvation, partition coefficients, and membrane permeabilities). The GSSI approach is based on the principle that all solution-phase processes can be modeled in terms of one or more gas-to-solution transfer processes. The free energy of each gas-to-solution transfer process is calculated as the sum of the free energy of cavity formation and the free energy of solute-solvent interaction. The solute's contributions to these free energies are modeled on the basis of various quantities computed from the solute's three-dimensional (3D) structure, whereas the solvent's contributions are modeled by empirically determined regression coefficients. More specifically, the free energy of cavity formation is modeled on the basis of the total solvent-accessible surface area of the solute. The enthalpy of solute-solvent interaction is modeled on the basis of intermolecular interaction potentials calculated at many uniformly distributed points on the solvent-accessible surface of the solute. The entropy of solute-solvent interaction is modeled on the basis of an effective number of rotatable bonds in the solute and by the regression coefficients characteristic of the solvent. The potential utility of the GSSI approach was demonstrated by modeling the free energy of gas-to-solution transfer for 111 solutes in water, 250 solutes in hexadecane, and 84 solutes in octanol.

Kinetics↗

PubMed1992

The folding of an enzyme. II. Substructure of barnase and the contribution of different interactions to protein stability.

Barnase is described anatomically in terms of its substructures and their mode of packing. The surface area of hydrophobic residues buried on formation and packing of the structural elements has been calculated. Changes in stability have been measured for 64 mutations, 41 constructed in this study, strategically located over the protein. The purpose is to provide: (1) information on the magnitudes of changes in stabilization energy for mutations of residues that are important in maintaining the structure; and (2) probes for the folding pathway to be used in subsequent studies. The majority of mutations delete functional moieties of side-chains or make isosteric changes. The energetics of the interactions are variable and context-dependent. The following general conclusions may be drawn, however, from this study about the classes of interactions that stabilize the protein. (1) Truncation of buried hydrophobic side-chains has, in general, the greatest effect on stability. For fully buried residues, this averages at 1.5 kcal mol-1 per methylene group with a standard deviation of +/- 0.6 kcal mol-1. Truncation of partly exposed leucine, isoleucine or valine residues that are in the range of 50 to 80 A2 of solvent-accessible area (30 to 50% of the total solvent-accessible area on a Gly-X-Gly tripeptide, i.e. those packed against the surface) has a smaller, but relatively constant effect on stability, at 0.81 kcal mol-1 per methylene group with a statistical standard deviation of +/- 0.18 kcal mol-1. (2) There is a very poor correlation between hydrophobic surface area buried and the free energy change for an extensive data set of hydrophobic mutants. The best correlation is found to be between the free energy change and the number of methylene groups within a 6 A radius of the hydrophobic groups deleted. (3) Burial of the hydroxyl group of threonine in a pocket that is intended for a gamma-methyl group of valine costs 2.5 kcal mol-1, in the range expected for the loss of two hydrogen bonds.(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acid Sequence↗

PubMed1993

Proposed atomic structure of a truncated human immunodeficiency virus glycoprotein gp120 derived by molecular modeling: target CD4 recognition and docking mechanism.

The atomic structure of a truncated glycoprotein gp120 from human immunodeficiency virus 1 (HIV-1) that contains the principal neutralizing antigenic sites and the CD4 binding domain has been derived by molecular dynamics and calculation of potential energy using the DREIDING force field. The resultant N-glycosylated molecular model is consistent with known properties of gp120 and docks with CD4 with a substantial reduction in the sum of the internal potential energies of the individual proteins (delta E = -200 kcal/mol). The primary mechanism of recognition and binding is the insertion of the solvent-accessible Phe-43 of CD4 into a gp120 solvent-accessible acceptor pit formed by Trp-427, Tyr-435, and the high-mannose oligosaccharide N-linked to Asn-230. delta E for the nonglycosylated complex is reduced significantly (-75 kcal/mol). Binding is by pi-pi* interactions of the aromatic groups forming a hydrophobic, thermodynamically stable environment for these functional noncovalent bonding participants. This model for gp120 provides a theoretical basis for the evaluation of HIV molecular pathogenesis involving the env proteins, the analysis of conformation on functional immune response of the host, and the design of nonproteinaceous inhibitors specific for the CD4 binding site on gp120.

Amino Acid Sequence↗

PubMed1979

Electrostatic effects in hemoglobin: hydrogen ion equilibria in human deoxy- and oxyhemoglobin A.

The modified Tanford-Kirkwood theory of Shire et al. [Shire, S. J., Hanania, G.I.H., & Gurd, F.R.N. (1974) Biochemistry 13, 2967] for electrostatic interactions was applied to the hydrogen ion equilibria of human deoxyhemoglobin and oxyhemoglobin. Atomic coordinates for oxyhemoglobin were generated by the application of the appropriate rigid rotation function to alpha and beta chains of the deoxyhemoglobin structure [Fermi, G. (1975) J. Mol. Biol. 97, 237]. The model employs two sets of parameters derived from the crystalline protein structures, the atomic coordinates of charged amino acid residues and static solvent accessibility factors to reflect their individual degrees of exposure to solvent. Theoretical titration curves based on a consistent set of pKint values compared closely with experimental potentiometric curves. Theoretical pK values at half-titration for individual protein sites corresponded to available observed values for both quaternary states. The results bring out the cumulative effects of numerous electrostatic interactions in the tetrameric structures and the major effects of the quaternary transition that result from changes in static solvent accessibility of certain ionizable groups.

Amino Acids↗