SEARCH · PubMed Health

Results for “Thermal Diffusion”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

PubMed1982

Experimental comparative study on morphological effects of different lasers on the liver.

Three types of laser radiation were compared as to their capabilities in hepatic surgery using 17 New Zealand rabbits. In four animals, subtotal scalpel lobectomy was performed, the hepatic pedicle being clamped. Hemostasis is obtained by means of argon or Nd YAG laser as long as the internal diameter of the vessels encountered is less than 4.5 mm. Nd YAG laser requires a power output four times higher than argon laser to obtain hemostasis. In six animals limited resection was performed by means of Nd YAG and CO2 lasers. CO2 radiation supplied insufficient hemostasis whenever the vessel diameter was more than 1 mm despite an excellent cutting power. Nd YAG radiation created an important necrosis zone due to thermal diffusion. In seven animals various focal hepatic lesions produced by the three types of laser were compared. Argon laser induced superficial and regularly round lesion, Nd YAG laser deeper, cauliflower-like lesions with thermal diffusion following especially vessels. Veins presented thrombosis of their blood content and coagulation necrosis of their wall. The amount of glycogenic granulation decreased. The CO2 laser induced very sharp punctual lesion without necrosis. Electron-microscopic sections revealed faint shadowy liver cells closet to the thermal source and bubbled mitochondria containing disrupted critea around the lesion. In later lesions Nd YAG laser produced more extensive fibrosis than argon or CO2 laser. After first clinical trials we believe that laser irradiation is actually an adjuvant safety factor in current hepatic surgery, whereas the Nd YAG laser could be of real interest in metastatic carcinoma destruction in liver.

Animals↗

PubMed2002

A microfabricated thermal field-flow fractionation system.

A microscale thermal field-flow fractionation (micro-TFFF) system has been designed, fabricated, and characterized. Motivation for miniaturization of TFFF systems was established by examining the geometrical scaling of the fundamental TFFF theory. Miniaturization of conventional macroscale TFFF systems was made possible through utilization of micromachining technologies. Fabrication of the micro-TFFF system was discussed in detail. The micro-TFFF system was characterized for plate height versus flow rate, single-component polystyrene retention, and multicomponent polystyrene separations. Retention, thermal diffusion coefficients, and maximum diameter-based selectivity values were extracted from separation data and found comparable with macroscale TFFF system results. Retention values ranged from 0.33 to 0.46. Thermal diffusion coefficients were between 3.0 x 10(-8) and 5.4 x 10(-8) cm2/s x K. The maximum diameter-based selectivity was 1.40.

Journal Article↗

PubMed2003

Characteristics of electron heat transport of plasma with an electron internal-transport barrier in the large helical device.

Associated with the transition from ion root to electron root, an electron internal transport barrier (ITB) appears in the large helical device, when the heating power of electron cyclotron resonance heating exceeds the threshold power. The incremental thermal diffusivity of electron heat transport chi(inc)(e) in the ITB plasma is much lower than that in the plasma with the heating power below the threshold, and the thermal diffusivity chi(e) decreases with increasing of heating power [dchi(e)/d(P/n(e))<0] in helical ITB plasmas.

Journal Article↗

PubMed2002

Scatter-limited phototherapy: a model for laser treatment of skin.

BACKGROUND AND OBJECTIVES: To effectively deliver laser light into the skin for non-ablative resurfacing, hair removal, and other applications, one must account for scatter, absorption, and thermal diffusion. A novel method to control the penetration of laser light into tissue is proposed. This method uses the incident beam diameter, the pulse duration, and the intrinsic light scattering of tissues such as skin to limit the laser light penetration and thermal damage. We term this innovative laser delivery concept 'scatter-limited phototherapy'. STUDY DESIGN/MATERIALS AND METHODS: This study demonstrates how the delivery mechanism simplifies the non-ablative treatment of sun-damaged skin. Calculations are based upon Gaussian scatter of light and isotropic thermal diffusion. Calculations of light distribution and profiles of temperature increase are created. RESULTS: Using an optical fiber delivery system with the appropriate diameter, coupled with skin surface protection, one can create thermal damage at a given depth with preservation of the epidermis. CONCLUSIONS: Scatter-limited phototherapy is a predictive model, allowing one to design better laser delivery systems. Scatter-limited phototherapy should also be applicable to other fields of dermatologic surgery, such as hair removal and the treatment of vascular lesions. Additionally, other medical specialties will be able to use the concept of scatter-limited phototherapy to predict and better understand laser-tissue interactions.

Hair Removal↗

PubMed1999

Biliary structures lead to tumour recurrences after laser-induced interstitial thermotherapy.

BACKGROUND AND OBJECTIVE: Thermal diffusion during laser-induced interstitial thermotherapy (LITT) has not yet been fully investigated in heterogeneous tissue architecture such as liver. LITT was performed on rabbit liver tumours to analyse the role of biliary structures in thermal diffusion. STUDY DESIGN/MATERIALS AND METHODS: Twenty-four VX2 tumours were grafted onto 12 rabbit livers. The animals were randomly separated into two groups when tumour size reached 8 mm. Thermotherapy was performed by delivering the 830-nm output of a diode laser to the centre of the tumour with a 300-,microm fibre. Irradiation conditions were 1.5 W over 900 sec. On day 7 or 14, the tumours were removed and stained with haematoxylin-eosin and picrosirius red F3BA (PR). Thermal damage was evaluated by PR and electron microscopic examinations. RESULTS: Among the treated tumours, recurrences were found both at the periphery (one on day 7, seven on day 14) and within the treated area (two on day 7, two on day 14). All recurrences were located in the vicinity of the biliary structures, which are frequently spared from thermal injury. CONCLUSION: Biliary ducts lead to a heat sink, thereby facilitating tumour recurrences.

Animals↗

PubMed2006

On the unsteady-state species separation of a binary liquid mixture in a rectangular thermogravitational column.

This paper investigates the unsteady-state species segregation of binary liquid mixtures in rectangular thermogravitational columns. The analysis leads to a procedure to obtain both molecular and thermal diffusion coefficients from transient separation measurements. Two models are presented: first, an ideal model where buoyancy only depends on temperature and second, a general model where buoyancy also varies with composition. Steady-state measurements are not required regardless of which model is chosen. As a result, the new procedure is faster than steady-state procedures. When either the molecular or thermal diffusion coefficient is known a priori, the other can be obtained without knowledge of fluid properties such as density, viscosity, thermal expansion, and compositional coefficients.

Journal Article↗

PubMed2003

Electron heat transport measured in a stochastic magnetic field.

New profile measurements have allowed the electron thermal diffusivity profile to be estimated from power balance in the Madison Symmetric Torus where magnetic islands overlap and field lines are stochastic. The measurements show that (1) the electron energy transport is conductive not convective, (2) the measured thermal diffusivities are in good agreement with numerical simulations of stochastic transport, and (3) transport is greatly reduced near the reversal surface where magnetic diffusion is small.

Journal Article↗

PubMed1980

Elementary transition state theory of the Soret and Dufour effects.

The elementary transition state approach has been used to obtain a simple model theory for the Soret effect (thermal diffusion) and the Dufour effect. The flow of heat in the Dufour effect is identified as the transport of the enthalpy change of activation as molecules diffuse. The theory as now formulated applies only to thermodynamically ideal mixtures of substances with molecules of nearly equal size. The results of the theory conform to the Onsager reciprocal relationship. When the results were fit to data on thermal diffusion for two liquid systems, a close fit was obtained and yielded reasonable values of between 2 and 3 kcal mol(-1) for enthalpy changes of activation and differences between the entropy changes of activation for the two components of between 0 and 1 cal K(-1) mol(-1).

Journal Article↗

PubMed2006

Probe beam size effect on the measurement of the distance between the probe beam and the sample in photothermal deflection.

A distance-scan method to determine the distance between the probe beam and sample, which is not easily measured exactly, in photothermal deflection (PD) was reported, with which the distance and thermal diffusivity of the deflecting medium can be simultaneously measured. Probe beam size effect (PBSE) on PD phase signal was quantitatively analyzed to clearly show its physical meaning. The measured distance was experimentally verified as correct and reliable, and the measured thermal diffusivities of N2 and CO2 are in good agreement with the literature values. They could not be precisely measured by phase signal without considering the PBSE.

Journal Article↗

PubMed2004

Mode-selective dynamic light scattering spectroscopy: application to the isotropic phase of liquid crystals.

We have developed a new method of "mode-selective" dynamic light scattering spectroscopy. This method allows us to study dynamic modes usually hidden behind large fluctuations of a critical mode. Here we apply this method to measurements of three dynamic modes of the isotropic phase of liquid crystals near the isotropic-nematic transition. In conventional methods detecting thermally excited modes, the thermal diffusion and sound modes are usually overwhelmed by the orientational relaxation mode since the intensity of the last mode diverges toward the isotropic-nematic critical point. Thanks to the phase-coherent detection ability of our method, we have successfully observed the thermal diffusion and sound modes without the interference of incoherent critical orientational fluctuations.

Crystallography↗

PubMed2007

Theoretical approach to evaluate thermodiffusion in aqueous alkanol solutions.

Flow due to thermodiffusion may change direction in fluid mixtures with the variation of composition and temperature. This occurrence remains an unraveled phenomenon in petroleum research. Using a modified theoretical approach, this paper evaluates the thermal diffusion factor in alkanol water mixtures, including methanol, ethanol, and isopropanol aqueous mixtures. By combining this approach with an equation of state perturbed chain statistical associating fluid theory and using two adjustable parameters calculated from experimental data, the present approach provides a good agreement for the prediction of thermal diffusion in alkanol water mixtures when compared with the available experimental data. This work reveals that the thermodiffusion in infinite dilutions may play an important role in understanding the thermodiffusion phenomena.

Journal Article↗

PubMedDate not supplied

Measurements of thermal properties for human femora.

In this study, density, specific heat, thermal conductivity, and thermal diffusivity were measured experimentally along the lengths of human cadaveric femora. Fresh and dry bone samples were selected from both male and female specimens, and for different age groups varying between 44 and 73 years old. Measured values for specific heat vary between 1.14 and 2.37 J/gm degrees C; for thermal conductivities the range is from 0.16 to 0.34 W/m degrees C; and for thermal diffusivities the range is from 0.10 to 0.23 cm2/sec, depending on whether the bone samples were fresh or dry, cancellous or cortical. The experimental results are presented in non-dimensional coordinates and are compared with the few other data available in the literature.

Adult↗

PubMedDate not supplied

"Nonisolated-sensor" solid polystyrene absorbed dose measurements.

A "nonisolated-sensor" solid polystyrene calorimeter was constructed to test the role of thermal diffusion in limiting the length of irradiation time during which temperature measurements with nonisolated sensors could be made sufficiently free of drift for determining dose with radiation fields such as gamma rays, x rays, and high-energy electrons. From measured ratios of dose at 5.0 and 0.5 cm in polystyrene and comparisons to dose measurements with a polystyrene parallel-plate (pancake) ion chamber, it was shown that thermal diffusion is sufficiently small in polystyrene to permit accurate measurements for irradiation periods of less than 20 min. Comparison of the absorbed dose measurements and depth dose ratios with pancake ion chambers and calorimeter showed, that within the precision and accuracy of the two measuring systems, there is close agreement. The nonisolated-sensor solid polystyrene calorimeter has the interesting features of (i) simplicity of construction, (ii) simplicity of operation without vacuum or feedback for temperature control, (iii) capability of simultaneous measurements at several depths and off-axis positions, (iv) the very small thermal defect correction with polystyrene, and (v) operation with the calorimeter in any orientation.

Calorimetry↗

PubMed1991

Effect of vibration frequency on finger blood flow.

A total of 18 healthy subjects (9 men and 9 women) 20-35 years of age were used to study the effect of vibration frequency on finger blood flow. Seven vibration frequencies of 16, 31.5, 63, 125, 250, 500 and 1,000 Hz, at vibrational accelerations of 10 m/s2 (rms: root mean square) or 50 m/s2 (rms), with the exception of 16 Hz, which was measured at only 10 m/s2 (rms), were randomly applied to the palm of the right hand for 1 min at intervals of about 3 min. Finger blood flow was measured simultaneously in both the right and the left middle fingers with a blood flowmeter using a thermal diffusion method and in the left middle finger with a laser Doppler flowmeter. The experiments were performed in an artificial climate chamber set at 23 degrees C air temperature and 50% humidity. Relatively great responses were observed at frequencies of 31.5-63 and 250-500 Hz on the exposed and unexposed sides, respectively, as measured with a blood flowmeter using a thermal diffusion method and at 31.5-63 as well as 500 Hz on the unexposed side with a laser Doppler flowmeter. These results may be related to Meissner's and pacinian corpuscles.

Acoustics↗

PubMedDate not supplied

Flow, diffusion, and thermal convection in percolation clusters: NMR experiments and numerical FEM/FVM simulations.

Percolation objects were fabricated based on computer-generated, two- or three-dimensional templates. Random-site, semi-continuous swiss cheese, and semi-continuous inverse swiss-cheese percolation models above the percolation threshold were considered. The water-filled pore space was investigated by NMR imaging and, in the presence of a pressure gradient, NMR velocity mapping. The fractal dimension, the correlation length, and the percolation probability were evaluated both from the computer-generated templates and the corresponding NMR spin density maps. Based on velocity maps, the percolation backbones were determined. The fractal dimension of the backbones turned out to be smaller than that of the complete cluster. As a further relation of interest, the volume-averaged velocity was calculated as a function of the probe volume radius. In a certain scaling window, the resulting dependence can be represented by a power law the exponent of which was not yet considered in the theoretical literature. The experimental results favorably compare to computer simulations based on the finite-element method (FEM) or the finite-volume method (FVM). Percolation theory suggests a relationship between the anomalous diffusion exponent and the fractal dimension of the cluster, i.e., between a dynamic and a structural parameter. We examined interdiffusion between two compartments initially filled with H2O and D2O, respectively, by proton imaging. The results confirm the theoretical expectation. As a third transport mechanism, thermal convection in percolation clusters of different porosities was studied with the aid of NMR velocity mapping. The velocity distribution is related to the convection roll size distribution. Corresponding histograms consist of a power law part representing localized rolls, and a high-velocity cut-off for cluster-spanning rolls. The maximum velocity as a function of the porosity clearly visualizes the percolation transition.

Computer Simulation↗

PubMed2002

Soret effect in interacting micellar solutions.

We show that electrostatic effects have a dramatic influence on thermal diffusion of charged micelles. In the dilute regime, the Soret coefficient strongly decreases with the solution ionic strength, and scales as the square of the Debye-Hückel length. Yet, collective effects yield a reversed scenario even at fairly low surfactant concentration. We find that single-particle behavior can be explained using an interfacial tension mechanism proposed by Ruckenstein, which also fairly accounts for collective effects and opens the way to a general picture of thermal diffusion in disperse systems.

Journal Article↗

PubMed1991

Thermal property measurements on biological materials at subzero temperatures.

The self-heated thermistor technique was used to measure the thermal conductivity and thermal diffusivity of biomaterials at low temperatures. Thermal standards were selected to calibrate the system at temperatures from -10 degrees C to -70 degrees C. The thermal probes were constructed with a convection barrier which eliminates convection inside liquid samples of low viscosity, without affecting the conductivity and diffusivity results. Using this technique, the thermal conductivity and diffusivity of two organ perfusates (HP5 and HP5 + 2M glycerol), one kidney phantom (a low ionic strength gel), as well as rabbit kidney cortex have been measured from -10 degrees C to -70 degrees C.

Animals↗

PubMed1998

A 3-D finite-element model for computation of temperature profiles and regions of thermal damage during focused ultrasound surgery exposures.

Although there have been numerous models implemented for modeling thermal diffusion effects during focused ultrasound surgery (FUS), most have limited themselves to representing simple situations for which analytical solutions and the use of cylindrical geometries sufficed. For modeling single lesion formation and the heating patterns from a single exposure, good results were achieved in comparison with experimental results for predicting lesion size, shape and location. However, these types of approaches are insufficient when considering the heating of multiple sites with FUS exposures when the time interval between exposures is short. In such cases, the heat dissipation patterns from initial exposures in the lesion array formation can play a significant role in the heating patterns for later exposures. Understanding the effects of adjacent lesion formation, such as this, requires a three-dimensional (3-D) representation of the bioheat equation. Thus, we have developed a 3-D finite-element representation for modeling the thermal diffusion effects during FUS exposures in clinically relevant tissue volumes. The strength of this approach over past methods is its ability to represent arbitrarily shaped 3-D situations. Initial simulations have allowed calculation of the temperature distribution as a function of time for adjacent FUS exposures in excised bovine liver, with the individually computed point temperatures comparing favorably with published measurements. In addition to modeling these temperature distributions, the model was implemented in conjunction with an algorithm for calculating the thermal dose as a way of predicting lesion shape. Although used extensively in conventional hyperthermia applications, this thermal dose criterion has only been applied in a limited number of simulations in FUS for comparison with experimental measurements. In this study, simulations were run for focal depths 2 and 3 cm below the surface of pig's liver, using multiple intensity levels and exposure times. The results also compare favorably to published in vitro experimental measurements, which bodes well for future application to more complex problems, such as the modeling of multiple lesion arrays within complex anatomical geometries.

Algorithms↗