SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The management of delayed union and nonunion is complex and is contingent on appropriate diagnosis and classification. Detection techniques and treatment options, including cast immobilization, electrical stimulation, surgical repair, or a combination of regimens, are discussed in this article.
Ankle arthrodesis is an operation that produces fusion of the talocrural joint. Ideally, the ankle is fused in a position of slight valgus, neutral dorsiflexion, midsagittal translation, slight posterior translation, symmetric external rotation, and plantigrade foot alignment. Malunion after ankle arthrodesis is characterized as a deviation from this ideal position. The derangement may produce inefficient or painful gait and pain or dysfunction at the hip, knee, or foot. Preoperative planning is essential to achieve a final plantigrade foot position. Correction is accomplished through the ankle arthrodesis itself, the foot, or the supramalleolar tibia. Complications of ankle malunion repair include nonunion; malunion; nerve, vessel or tendon injury; and infection.
Many patients with foot and ankle deformities have concurrent deformities (osseous and soft tissue), with or without limb length discrepancies. Lower extremity deformities and limb length discrepancies typically result from trauma, congenital abnormality, avascular necrosis, previous surgery, nonunion, and malunion. Limb deformity correction requires extensive surgical experience because many considerations and factors apply to realignment. The considerations and factors regarding realignment are highlighted throughout this article.
Anterior knee pain is a common symptom, which may have a large variety of causes including patellofemoral pathologies. Patellofemoral maltracking refers to dynamic abnormality of patellofemoral alignment and has been measured using plain film, computed tomography (CT) and magnetic resonance imaging (MRI) using static and kinematic techniques. Patellar dislocation is usually transient, but specific conventional radiographic and MRI features may provide evidence of prior acute or chronic dislocation. In addition, chondromalacia patellae, osteochondritis dissecans, patellofemoral osteoarthritis, excessive lateral pressure syndrome, and bipartite patella have all been implicated in causing patellofemoral pain. The imaging and clinical features of these processes are reviewed, highlighting the specific diagnostic features of each condition.
Wrist deformities can occur after fracture because of malunion of the fracture or injury to the growth plate leading to imbalance of growth. Prevention of malunion is paramount by early recognition with proper reduction and casting or fixation with casting. If a mal-union occurs, an osteotomy may be necessary if anticipated growth will not correct the deformity. Injury of the growth plate may lead to wrist deformity in two ways: angular growth or growth arrest. Angular growth deformities are corrected most commonly by osteotomy. Growth arrest of the radius or the ulna leads to an ulnar-positive or an ulnar-negative variance at the wrist. If the ulnar variance is symptomatic, treatment is centered on achieving a level joint. Options for joint leveling procedures include epiphysiodesis or physeal stapling of the longer bone, lengthening osteotomy of the shorter bone, or shortening osteotomy of the longer bone.
Nonunion of the lateral humeral condyle,cubitus varus, cubitus valgus, and fishtail deformity represent particularly challenging problems to the upper extremity surgeon. Although closed or open reduction and pinning of supracondylar fractures of the distal humerus can restore anatomic alignment and avoid anatomic deformities in most cases, closed reduction is still a common form of treatment. In those hopefully few cases in which reduction is less than optimal, or when a good reduction is performed but subsequently lost between follow-up visits, the aforementioned deformities of the distal humerus can develop. Even when anatomic reduction is obtained and held, avascular necrosis of the trochlea may develop, leading to the so-called fishtail deformity. Although not recognized for several years, and when initially recognized, not necessarily taken seriously, fishtail deformity may be one of the more devastating deformities in that it is not correctable by traditional methods of osteotomy. Flexion contracture when present may be treated by standard release; however, when a bony block exists as a result of the shape of the fishtail, nonsurgical options exist and the patient often is left with a permanent loss of motion.
OBJECTIVES: Although knee alignment is associated with the progression of knee osteoarthritis (OA), it is unclear which features that characterize radiographic OA are related to alignment. The aim of this study was to examine the relationship between static knee joint alignment (measured as a continuous variable) and the radiographic features of knee OA (joint space narrowing and osteophytes). METHODS: One hundred and twenty one adults with symptomatic knee OA were recruited using a combined strategy including referral from specialist centres, arthritis support groups and media advertising. X-rays were performed to classify the severity of disease and to determine static knee alignment. RESULTS: Increasing varus knee alignment was associated with increasing risk of medial compartment joint space narrowing (P < 0.001) and osteophytes (P = 0.005). Increasing valgus knee alignment was associated with an increased risk for lateral compartment joint space narrowing (P < 0.001) and osteophytes (P = 0.002). CONCLUSION: This study has demonstrated that the static knee angle, measured as a continuous variable, is an important determinant of the compartment-specific features of radiographic knee OA. Further work is required to determine whether interventions aimed at correcting these relatively minor levels of varus and valgus angulation will have an effect on the risk of tibiofemoral OA.
BACKGROUND: Different alignment strategies in total knee arthroplasty (TKA) may affect the patellofemoral joint. Mechanical alignment (MA) is commonly used but may alter native anatomy. Newer strategies such as kinematic alignment (KA), restricted kinematic alignment (rKA), and functional alignment (FA) aim to better restore native joint mechanics. This study provides an overview of the effects of alignment strategies on patellofemoral outcomes after TKA. METHODS: A literature search in July 2025 identified studies comparing patellofemoral outcomes in TKA using different alignment strategies. Of 166 studies screened, eight met inclusion criteria. Three studies were considered medium quality and five studies low quality. RESULTS: KA and rKA more closely restored native trochlear morphology than MA and FA, reducing outliers in the anterior trochlear line compared with MA and FA. MA showed greater trochlear translation, suggesting worse patellar tracking. Trochlear angles were more anatomical in KA and rKA. However, KA was associated with increased internal femoral component rotation and more outliers beyond safe thresholds. FA showed more consistent rotational positioning, generally within safe limits. Lateral patellar shift and intraoperative lateral release rates did not differ significantly between KA and MA. Only one study reported patella-specific clinical outcome scores, finding no difference between FA and adjusted MA. CONCLUSION: KA and rKA better restore trochlear morphology, but risk excessive internal femoral component rotation. FA provides a more balanced approach. MA, while widely used, is linked to altered trochlear shape and worse patellar tracking. The clinical impact of these radiological differences remains unclear, and higher-quality studies are needed.
Iatrogenic cervical deformity can develop after anterior or posterior procedures. Careful attention to detail can minimize the likelihood of creating a sagittal or coronal plane deformity. Strategies for the prevention and correction of postoperative cervical deformity are presented.
Altered position of the patella has been associated with patellofemoral joint pain. The main techniques used for assessment of position are either expensive or invasive; there are limited reports of the use of ultrasound (US) scanning to assess patella position. The aim of this study was to establish the validity of a measure of patella position using US scanning compared with those found using magnetic resonance imaging (MRI). MRI and US scans were taken of 20 subjects and analyzed using previously described methods. The correlation between patella position assessed by US scan and lateral patella displacement on MRI showed a good statistically significant correlation (r = 0.64, p = 0.003). The correlation between the patella position assessed by US scan and the equivalent measure on MRI showed an excellent statistically significant correlation (r = 0.78, p = 0.0001). The method described has shown US scanning to be a reliable measure of patella position, with strong criterion validity compared with MRI measures.
Unreamed intramedullary nailing is an alternative to external fixation in the treatment of open tibial fractures. We compared a prospective series of thirty-one patients managed with a solid nail with static interlocking without intramedullary reaming, with a retrospective series of thirty-one patients managed by external fixation. The protocol for soft tissue treatment was the same throughout the study period. Most fractures were caused by high energy trauma and included Grade I to III B injuries. The fracture wound infection rate was equal in both groups; there were two deep and three superficial infections in the nail group and three deep and two superficial infections in the external fixation group. In addition, eleven patients in the external fixation group had severe pin track infections. The mean time to union was five months in the nail group and eight months in the external fixation group. The incidence of delayed union was twice as high in the external fixation group as in the nail group. The number of surgical procedures performed to promote union was three times higher in the external fixation group. The malunion rate did not differ between the groups. Although the treatment groups are not fully comparable, the results indicate that intramedullary nailing is superior to external fixation in the treatment of most open tibial fractures.
Several factors can lead to persistent instability after total knee arthroplasty, including bone and soft tissue loss, preexisting ligamentous laxity, and poor operative technique. Achieving stability should not be equated with making the knee extremely tight, without any natural laxity.
PURPOSE OF THE STUDY: We conducted a retrospective radiographic study to identify and quantify medial and lateral misalignments in candidates for total knee arthroplasty. MATERIAL AND METHODS: We studied a discontinuous series of 101 patients (164 knees) among candidates for total knee arthroplasty seen between 1990 and 2002. We selected a random sample for study. Exclusion criteria were any history of fracture, surgical treatment, rheumatoid disease, or congenital disorder. A first group of 136 genu varum knees was identified in 82 patients (mean age 72 years, mean weight 79 kg). A second group of 28 genu valgum knees was identified in 19 patients (mean age 67 years, mean weight 71 kg). The standard radiograms were digitalized for semi-automatic measurements using the Metros software. We recorded overall deformation, femoral valgus, tibial varus, HKA angle, HKS angle (mechanical/anatomic axis of the femur) and angle C (horizontal inclination of the ankle to the ground). All measures were compared between each other for each patient to search for relations. RESULTS: In the genu varum group (136 knees), mean overall deformation was 9 degrees , mainly due to tibial misalignment (5.5 degrees ) with a 1 degrees femoral valgus component. The HKS angle was 6.3 degrees , and lateral joint gap 4.3 degrees ; the C angle was 4 degrees . Overall varus followed tibial varus (p<0.01). Ankle inclination followed tibial varus (p<0.01). In the genu valgum group (28 knees), overall deformation was 4.2 degrees , mainly due to femoral misalignment (5.6 degrees) with 1 degrees tibial varus and a medial joint gap of 2 degrees . The HKS angle was 4.7 degrees and the mean C angle -4 degrees . Overall valgus was related to femoral valgus (p<0.001). Tibial varus was greater with greater femoral valgus (p<0.01). In both groups, the HKS angle was smaller with greater femoral valgus. DISCUSSION: Semi-automatic measurements on digitalized films enabled excellent reproducibility. Causes of error were related to limb rotation at acquisition. This study showed that genu varum worsens because of tibial wear followed by ligament distension, while for genu valgum, worsening predominantly results from femoral wear. The ankle joint line was nearly horizontal in one-third of the limbs, even when there was a major misalignment of the lower limb. The HKS angle was quite variable in both morphotypes, but was smaller with greater femoral valgus in both groups. CONCLUSION: Measuring all components involved in medial and lateral knee misalignment is very useful for understanding the morphotype of each individual knee before performing osteotomy or implanting a knee prosthesis.
The Cardanic or Eulerian description is the most commonly used method for the description of in vivo knee rotation. It is based on the determination of external anatomical landmarks used for the decomposition of the position of the tibia relative to the femur by three rotations about three pre-defined axes. However, the in vivo localisation of external anatomical landmarks is known to be difficult and subjective. Even a small mislocalisation may lead to dramatic consequences: the Cardanic description may become irreproducible and angle values may be overestimated. This error is well documented in the literature and known as the "cross-talk effect". Therefore this study proposes an additional calibration step of the classic Cardanic description by a reorientation procedure of rotation axes. The procedure is based on biomechanical constraints of knee kinematics as they appear during a knee squat exercise using the finite helical axis (FHA) method and is independent of anatomical landmark. The method was validated with the help of a special set-up modelling a perfect knee. Furthermore, an inter-session reliability study was performed involving tests on two healthy subjects during knee squat exercises. We found that the reorientation procedure was more reproducible than the classic Cardanic description. We observed a maximum inter-session difference of 37.1 degrees for the adduction angle obtained with the classic Cardanic description. In contrast, the maximum angle difference obtained with the reorientation procedure was less than 10 degrees.
Rheumatoid arthritis (RA) causes structural damage that precipitates joint deformity, including metacarpophalangeal (MCP) joint ulnar drift (UD). Orthoses have been designed in order to maintain hand function by improving joint alignment, restoring biomechanical balance and reducing stress on supporting diseased tissues. This study investigated the impact an MCP UD (MUD) splint had on: pain, hand function, grip strength, and passive correction of UD when worn for function by RA patients. Twenty seven hands (26 subjects) were evaluated and performances compared with and without the splint. Results showed anatomic alignment improved significantly in all except the index finger. The mean difference for all fingers combined was 10 degrees. Observable correction of subluxation was identified from x-ray film and noted in 14.8% of index fingers, 18.5% of middle fingers, 33.3% of ring fingers, and 48.1% of little fingers. Three point pinch showed a statistically significant change, the mean difference being an improvement of 15% while wearing the splint. There was no significant change in hand function score, pain score, gross grip strength, and lateral pinch. Subjects' perceptions of the MUD splint gained from a questionnaire showed a high acceptance: 79.2% reporting minimal interference in ADL, 95.8% satisfied with cosmesis, 87.5% satisfied with comfort, and 95.8% reported continued use of the orthosis.
To analyze the effect of lower-limb rotation on foot pressure distribution, 16 patients (23 feet) with neuromuscular diseases who received derotation osteotomy of lower limbs without concomitant foot-ankle procedures were included in this retrospective study. The cross-correlation analysis showed that the interval change of the foot progression angle was correlated with the interval change of the medial-lateral foot pressure impulse distribution. The externally rotated foot progression angle tends to introduce higher loading on the medial foot, and the internally rotated foot progression angle shifts the loading to lateral side of the foot. This study provides evidence that the rotational profile of the lower limb has a substantial impact on foot pressure distribution.
Accurate component placement in knee replacement surgery is important. The precision with which the implants are placed directly affects patient outcome as implant position and alignment influence stability, durability and patellar tracking. The ability to measure the accuracy of implantation of knee replacement components is valuable in assessing not only ones own technique but also in evaluating new instruments or implants and in teaching. The standard AP and lateral radiographs employed by most surgeons give inadequate information to assess alignment of each component accurately. We present a straightforward way of assessing femoral and tibial component alignment by using a series of three radiographs. This technique is reproducible and can be performed using standard equipment in any radiology department. This technique was applied to 160 total knee replacements performed using newly developed instrumentation. It was shown to be simple and the measurements were reproducible, with very little inter observer bias. We believe this technique has a role in audit, teaching, training and assessing new techniques and instruments.