SEARCH · PubMed Health

Results for “CELLULOSE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

PubMed1980

Effect of delignification upon in vitro digestion of forage cellulose.

Orchardgrass forages harvested at two maturities (early and late) were ground through two screens (1 and 8 mm) and digested in vitro as intact forage and forage delignified by permanganate oxidation. Initial and residual cell wall, initial and residual cellulose and potentially digestible cellulose were greater in late intact forage than in the early. In the delignified forage, late cut forage had less residual cellulose than did the early, but initial and potentially digestible cellulose were similar. Particle size had less consistent and smaller effects upon cell wall and cellulose than did maturity. Cellulose of intact orchardgrass was 64% digested at 72 h vs 94% for cellulose of delignified orchardgrass. Digestion rate of cellulose was .0197 and .0220 logn units/hr for early and late cut intact forage and .0554 and .0719 logn units/hr for early and late cut delignified forage. Removal of the inhibitory effects of lignin increased the amount of digestible cellulose, increased the rate at which cellulose degraded and decreased the indigestible cellulose residue. Reduction in lignin could greatly improve forage intake and utilization at moderate levels of animal production.

Animal Feed↗

PubMed2001

Sucrose phosphate synthase activity rises in correlation with high-rate cellulose synthesis in three heterotrophic systems.

Based on work with cotton fibers, a particulate form of sucrose (Suc) synthase was proposed to support secondary wall cellulose synthesis by degrading Suc to fructose and UDP-glucose. The model proposed that UDP-glucose was then channeled to cellulose synthase in the plasma membrane, and it implies that Suc availability in cellulose sink cells would affect the rate of cellulose synthesis. Therefore, if cellulose sink cells could synthesize Suc and/or had the capacity to recycle the fructose released by Suc synthase back to Suc, cellulose synthesis might be supported. The capacity of cellulose sink cells to synthesize Suc was tested by analyzing the Suc phosphate synthase (SPS) activity of three heterotrophic systems with cellulose-rich secondary walls. SPS is a primary regulator of the Suc synthesis rate in leaves and some Suc-storing, heterotrophic organs, but its activity has not been previously correlated with cellulose synthesis. Two systems analyzed, cultured mesophyll cells of Zinnia elegans L. var. Envy and etiolated hypocotyls of kidney beans (Phaseolus vulgaris), contained differentiating tracheary elements. Cotton (Gossypium hirsutum L. cv Acala SJ-1) fibers were also analyzed during primary and secondary wall synthesis. SPS activity rose in all three systems during periods of maximum cellulose deposition within secondary walls. The Z. elegans culture system was manipulated to establish a tight linkage between the timing of tracheary element differentiation and rising SPS activity and to show that SPS activity did not depend on the availability of starch for degradation. The significance of these findings in regard to directing metabolic flux toward cellulose will be discussed.

Arabidopsis Proteins↗

PubMed1982

[Adsorption of cellulolytic enzymes on cellulose and the kinetics of the adsorbed enzymes. Two modes for interaction of the enzymes with the insoluble substrate].

The affinity of cellulolytic enzymes of various origin for microcrystalline cellulose (MCC) in a column type reactor has been studied. It was shown that there exist two types of the enzymes differing in their ability to bind to cellulose and to degrade MCC. One group of cellulases is characterized by weak affinity for MCC and by a rather low degree of conversion of this substrate into soluble products, but shows a burst of soluble products during the initial period of the hydrolysis. On the contrary, the other group of the enzymes irreversibly binds to cellulose and shows a noticeable ability to solubilize MCC. The results obtained suggest that the weak binding reflects a productive enzyme--cellulose interaction by the enzyme active center, like its interaction with soluble polymeric substrates. The tight binding, on the other hand, is less productive and reflects the interaction of peripheral parts of the enzymes with the cellulose surface. The hydrolytic action of the tightly adsorbed cellulases proceeds on the substrate surface consecutively, without leaving the insoluble substrate between the catalytic acts and the enzymes might steadily penetrate into the cellulose matrix. This in turn might induce mechanical fragmentation of the substrate. The rate of action of adsorbed cellulases can be limited by their diffusion along the surface or into the cellulose matrix. A decrease of the ionic strength weakens the cellulase affinity for cellulose, which in its turn leads to an increase in the initial burst of the soluble products of cellulose hydrolysis and a respective decrease of efficiency of cellulose conversion into glucose. It is concluded that the principal factor which determines the ability of cellulases to degrade crystalline cellulose is the affinity (i. e. degree of adsorption) of the enzymes for the insoluble substrate.

Cellulase↗

PubMed1997

Surface Force Studies of Langmuir-Blodgett Cellulose Films

The interactions between cellulose surfaces, between chitosan-coated surfaces, and between one cellulose surface and one chitosan-coated surface have been studied using the interferometric surface force apparatus (SFA). The cellulose surfaces were prepared by depositing trimethylsilyl cellulose on hydrophobized mica using the Langmuir-Blodgett technique. The surfaces were desilylated in a humid HCl atmosphere to obtain regenerated cellulose. ESCA measurements and wetting studies demonstrated that the desilylation process was effective. Scanning force microscopy studies showed the cellulose surfaces to be smooth with a root-mean-square roughness of 0.16 nm. Surface force and ellipsometry measurements illustrate that the cellulose film swells considerably in humid air and in water, suggesting that it is mostly amorphous. The interaction between two cellulose surfaces is dominated by a steric repulsion caused by a few dangling tails. On separation an attractive force was present both between two cellulose surfaces and between one cellulose surface and one chitosan surface. The long-range interaction between cellulose and chitosan was shown to be attractive.

Journal Article↗

PubMed1981

Ethanol Production by Thermophilic Bacteria: Fermentation of Cellulosic Substrates by Cocultures of Clostridium thermocellum and Clostridium thermohydrosulfuricum.

The fermentation of various saccharides derived from cellulosic biomass to ethanol was examined in mono- and cocultures of Clostridium thermocellum strain LQRI and C. thermohydrosulfuricum strain 39E. C. thermohydrosulfuricum fermented glucose, cellobiose, and xylose, but not cellulose or xylan, and yielded ethanol/acetate ratios of >7.0. C. thermocellum fermented a variety of cellulosic substrates, glucose, and cellobiose, but not xylan or xylose, and yielded ethanol/acetate ratios of approximately 1.0. At nonlimiting cellulosic substrate concentrations ( approximately 1%), C. thermocellum cellulase hydrolysis products accumulated during monoculture fermentation of Solka Floc cellulose and included glucose, cellobiose, xylose, and xylobiose. A stable coculture that contained nearly equal numbers of C. thermocellum and C. thermohydrosulfuricum was established that fermented a variety of cellulosic substrates, and the ethanol yield observed was twofold higher than in C. thermocellum monoculture fermentations. The metabolic basis for the enhanced fermentation effectiveness of the coculture on Solka Floc cellulose included: the ability of C. thermocellum cellulase to hydrolyze alpha-cellulose and hemicellulose; the enhanced utilization of mono- and disaccharides by C. thermohydrosulfuricum; increased cellulose consumption; threefold increase in the ethanol production rate; and twofold decrease in the acetate production rate. The coculture actively fermented MN300 cellulose, Avicel, Solka Floc, SO(2)-treated wood, and steam-exploded wood. The highest ethanol yield obtained was 1.8 mol of ethanol per mol of anhydroglucose unit in MN300 cellulose.

Journal Article↗

PubMed1996

The Cellulases Endoglucanase I and Cellobiohydrolase II of Trichoderma reesei Act Synergistically To Solubilize Native Cotton Cellulose but Not To Decrease Its Molecular Size.

Degradation of cotton cellulose by Trichoderma reesei endoglucanase I (EGI) and cellobiohydrolase II (CBHII) was investigated by analyzing the insoluble cellulose fragments remaining after enzymatic hydrolysis. Changes in the molecular-size distribution of cellulose after attack by EGI, alone and in combination with CBHII, were determined by size exclusion chromatography of the tricarbanilate derivatives. Cotton cellulose incubated with EGI exhibited a single major peak, which with time shifted to progressively lower degrees of polymerization (DP; number of glucosyl residues per cellulose chain). In the later stages of degradation (8 days), this peak was eventually centered over a DP of 200 to 300 and was accompanied by a second peak (DP, (apprx=)15); a final weight loss of 34% was observed. Although CBHII solubilized approximately 40% of bacterial microcrystalline cellulose, the cellobiohydrolase did not depolymerize or significantly hydrolyze native cotton cellulose. Furthermore, molecular-size distributions of cellulose incubated with EGI together with CBHII did not differ from those attacked solely by EGI. However, a synergistic effect was observed in the reducing-sugar production by the cellulase mixture. From these results we conclude that EGI of T. reesei degrades cotton cellulose by selectively cleaving through the microfibrils at the amorphous sites, whereas CBHII releases soluble sugars from the EGI-degraded cotton cellulose and from the more crystalline bacterial microcrystalline cellulose.

Journal Article↗

PubMed2006

Cell-wall structure and anisotropy in procuste, a cellulose synthase mutant of Arabidopsis thaliana.

In dark-grown hypocotyls of the Arabidopsis procuste mutant, a mutation in the CesA6 gene encoding a cellulose synthase reduces cellulose synthesis and severely inhibits elongation growth. Previous studies had left it uncertain why growth was inhibited, because cellulose synthesis was affected before, not during, the main phase of elongation. We characterised the quantity, structure and orientation of the cellulose remaining in the walls of affected cells. Solid-state NMR spectroscopy and infrared microscopy showed that the residual cellulose did not differ in structure from that of the wild type, but the cellulose content of the prc-1 cell walls was reduced by 28%. The total mass of cell-wall polymers per hypocotyl was reduced in prc-1 by about 20%. Therefore, the fourfold inhibition of elongation growth in prc-1 does not result from aberrant cellulose structure, nor from uniform reduction in the dimensions of the cell-wall network due to reduced cellulose or cell-wall mass. Cellulose orientation was quantified by two quantitative methods. First, the orientation of newly synthesised microfibrils was measured in field-emission scanning electron micrographs of the cytoplasmic face of the inner epidermal cell wall. The ordered transverse orientation of microfibrils at the inner face of the cell wall was severely disrupted in prc-1 hypocotyls, particularly in the early growth phase. Second, cellulose orientation distributions across the whole cell-wall thickness, measured by polarised infrared microscopy, were much broader. Analysis of the microfibril orientations according to the theory of composite materials showed that during the initial growth phase, their anisotropy at the plasma membrane was sufficient to explain the anisotropy of subsequent growth.

Anisotropy↗

PubMed1978

Comparison of glucocorticoid-receptor complex binding to nuclei and DNA cellulose. Evidence for different forms of interaction.

Binding of dexamethasone . receptors with isolated nuclei, DNA-cellulose and cellulose has been compared with respect to dependence on salt concentration and resistance to KCl extraction and DNAse I digestion. A solution of cytoplasmic dexamethasone . receptor complexes was prepared by the incubation of rat thymus cells with steroid at 3 degrees C and breaking the cells by hypotonic lysis. Activation of the complexes was accomplished by warming the solution at 25 degrees C for 15 min. Activation significantly increased the ability of dexamethasone . receptors to bind to nuclei and DNA-cellulose but not to cellulose. Dexamethasone-receptor complexes bound to nuclei at 3 degrees C are completely resistant to extraction with 0.1 M KCl, 76% resistant to 0.2 M KCl and 20% resistant to 0.4 M KCl. Dexamethasone . receptors bound to DNA-cellulose are 45% resistant to extraction with 0.1 M and 0.2 M KCl and 29% resistant to 0.4 M KCl extraction. Cellulose-bound dexamethasone . receptors are not resistant to any of these extractions. DNAase I treatment releases 60% of the dexamethasone . receptors bound to DNA-cellulose but only 13% of those bound to nuclei, though at least 60% of the nuclear DNA is solubilized. The presence of 0.15 M KCl decreases binding of activated dexamethasone . receptors to nuclei by 73% but to DNA-cellulose by only 17%. Pretreatment of nuclei with 0.1--0.4 M KCl reduces their capacity to bind activated dexamethasone . receptors by 90% whereas similar treatment reduces the capacity of DNA-cellulose to bind dexamethasone . receptors by only 29%. Nuclei extracted with 0.1 M KCl appear to have a limited capacity to accept dexamethasone . receptors. These studies demonstrate that binding of dexamethasone . receptors to nuclei and DNA-cellulose differs by (a) the higher resistance of nuclear complexes to KCl and DNAase I treatment; (b) the much greater sensitivity of nuclei to KCl treatment.

Cell Nucleus↗

PubMed2002

ORF2 gene involves in the construction of high-order structure of bacterial cellulose.

An ORF2 gene located upstream of the cellulose synthase (bcs) operon of Acetobacter xylinum BPR2001 was disrupted and a mutant (M2-2) was constructed. In static cultivation, the parent strain produced a tough, colorless, and insoluble cellulose pellicle, whereas M2-2 culture produced a thin, yellow, and fragile pellicle. The results of X-ray diffraction and 13C solid-state NMR indicated that the product of M2-2 is a mixture of cellulose I, cellulose II, and amorphous cellulose. The cellulose I to cellulose II ratio of the mixture was evaluated from the signal areas of C6 to be about 1:2. Electron microscopy revealed that the product of M2-2 included ribbon-like cellulose and irregularly shaped particles attached to the ribbons. On the other hand, the mutant complemented with plasmid pSA-ORF2/k containing the ORF2 gene and BPR2001 produced only cellulose I. These results indicate that the ORF2 gene is involved in the production and crystallization of cellulose I microfibrils by this microorganism.

Acetobacter↗

PubMed2002

Ion-exchange separation of proteins by polyallylamine-grafted cellulose gel.

A cellulose-based anion exchanger bearing water-soluble polycation was tested for separation of proteins. The exchanger was obtained by partial oxidation of cellulose gel by aq. NaIO4 followed by Schiff base formation with polyallylamine (PAA, molecular mass 5000). The retention behavior of proteins for three grades of PAA-cellulose gels, with amino group contents of 0.35, 0.59 and 0.96 mmol/g cellulose, was examined at several pH values and compared with that for conventional DEAE-cellulose gel with amino group content of 1.07 mmol/g cellulose. The retention of proteins by PAA-cellulose gels was remarkably greater than that for the DEAE-cellulose gel. Pairs of proteins having close isoelectric points and molecular masses (human and bovine serum albumins; beta-lactoglobulin A and B) could be separated by the PAA-cellulose gel columns. Such efficiency can be ascribed to high local density of grafted polyallylamine, in contrast to the random and sparse charge distribution in DEAE-cellulose.

Cellulose↗

PubMed2006

Unique gelation behavior of cellulose in NaOH/urea aqueous solution.

A transparent cellulose solution was prepared by mixing 7 wt % NaOH with 12 wt % urea aqueous solution which was precooled to below -10 degrees C and which was able to rapidly dissolve cellulose at ambient temperature. The rheological properties and behavior of the gel-formed cellulose solution were investigated by using dynamic viscoelastic measurement. The effects of temperature, time, cellulose molecular weight, and concentrations on both the shear storage modulus (G') and the loss modulus (G") were analyzed. The cellulose solution having a viscosity-average molecular weight (M(eta)) of 11.4 x 10(4) had its sol-gel transition temperature decreased from 60.3 to 30.5 degrees C with an increase of its concentration from 3 to 5 wt %. The gelation temperature of a 4 wt % cellulose solution dropped from 59.4 to 30.5 degrees C as the M(eta) value was increased from 4.5 x 10(4) to 11.4 x 10(4). Interestingly, at either higher temperature (above 30 degrees C), or lower temperature (below -3 degrees C), or for longer gelation time, gels could form in the cellulose solutions. However, the cellulose solution remains a liquid state for a long time at the temperature range from 0 to 5 degrees C. For the first time, we revealed an irreversible gelation in the cellulose solution system. The gel having been formed did not dissolve even when cooled to the temperature of -10 degrees C, at which it was dissolved previously. Therefore, this indicates that either heating or cooling treatment could not break such stable gels. A high apparent activation energy (E(a)) of the cellulose solution below 0 degrees C was obtained and was used to explain the gel formation under the cooling process.

Cellulose↗

PubMed2003

Biofilm formation at the air-liquid interface by the Pseudomonas fluorescens SBW25 wrinkly spreader requires an acetylated form of cellulose.

The wrinkly spreader (WS) genotype of Pseudomonas fluorescens SBW25 colonizes the air-liquid interface of spatially structured microcosms resulting in formation of a thick biofilm. Its ability to colonize this niche is largely due to overproduction of a cellulosic polymer, the product of the wss operon. Chemical analysis of the biofilm matrix shows that the cellulosic polymer is partially acetylated cellulose, which is consistent with predictions of gene function based on in silico analysis of wss. Both polar and non-polar mutations in the sixth gene of the wss operon (wssF ) or adjacent downstream genes (wssGHIJ ) generated mutants that overproduce non-acetylated cellulose, thus implicating WssFGHIJ in acetylation of cellulose. WssGHI are homologues of AlgFIJ from P. aeruginosa, which together are necessary and sufficient to acetylate alginate polymer. WssF belongs to a newly established Pfam family and is predicted to provide acyl groups to WssGHI. The role of WssJ is unclear, but its similarity to MinD-like proteins suggests a role in polar localization of the acetylation complex. Fluorescent microscopy of Calcofluor-stained biofilms revealed a matrix structure composed of networks of cellulose fibres, sheets and clumped material. Quantitative analyses of biofilm structure showed that acetylation of cellulose is important for effective colonization of the air-liquid interface: mutants identical to WS, but defective in enzymes required for acetylation produced biofilms with altered physical properties. In addition, mutants producing non-acetylated cellulose were unable to spread rapidly across solid surfaces. Inclusion in these assays of a WS mutant with a defect in the GGDEF regulator (WspR) confirmed the requirement for this protein in expression of both acetylated cellulose polymer and bacterial attachment. These results suggest a model in which WspR regulation of cellulose expression and attachment plays a role in the co-ordination of surface colonization.

Acetylation↗

PubMed2003

Mutation or drug-dependent microtubule disruption causes radial swelling without altering parallel cellulose microfibril deposition in Arabidopsis root cells.

As critical determinants of growth anisotropy in plants, cortical microtubules are thought to constrain the movement of cellulose synthase complexes and thus align newly deposited cellulose microfibrils. We tested this cellulose synthase constraint model using the temperature-sensitive mor1-1 mutant of Arabidopsis. Contrary to predictions, the disruption of cortical microtubules in mor1-1 root epidermal cells led to left-handed root twisting and radial swelling but did not alter the transverse orientation of cellulose microfibrils. We also found that drug-dependent disassembly or hyperstabilization of cortical microtubules did not alter the parallel order of cellulose microfibrils. By measuring cellulose content in mor1-1 seedlings, we verified that cellulose synthesis is not reduced at the restrictive temperature. The independence of cortical microtubule organization and cellulose microfibril alignment was supported by the observation that double mutants of mor1-1 and rsw1-1, the cellulose-deficient mutant with misaligned microfibrils, had additive phenotypes. Our results suggest that cortical microtubules regulate growth anisotropy by some mechanism other than cellulose microfibril alignment or synthesis.

Arabidopsis↗

PubMed1995

Mechanism of cellulose synthesis in Agrobacterium tumefaciens.

Extracts of Agrobacterium tumefaciens incorporated UDP-[14C]glucose into cellulose. When the extracts were fractionated into membrane and soluble components, neither fraction was able to synthesize cellulose. A combination of the membrane and soluble fractions restored the activity found in the original extracts. Extracts of cellulose-minus mutants showed no significant incorporation of UDP-glucose into cellulose. When mixtures of the extracts were made, the mutants were found to fall into two groups: extracts of mutants from the first group could be combined with extracts of the second group to obtain cellulose synthesis. No synthesis was observed when extracts of mutants from the same group were mixed. The groups of mutants corresponded to the two operons identified in sequencing the cel genes (A. G. Matthysse, S. White, and R. Lightfoot. J. Bacteriol. 177:1069-1075, 1995). Extracts of mutants were fractionated into membrane and soluble components, and the fractions were mixed and assayed for the ability to synthesize cellulose. When the membrane fraction from mutants in the celDE operon was combined with the soluble fraction from mutants in the celABC operon, incorporation of UDP-glucose into cellulose was observed. In order to determine whether lipid-linked intermediates were involved in cellulose synthesis, permeablized cells were examined for the incorporation of UDP-[14C]glucose into material extractable with organic solvents. No radioactivity was found in the chloroform-methanol extract of mutants in the celDE operon, but radioactive material was recovered in the chloroform-methanol extract of mutants in the celABC operon. The saccharide component of these compounds was released after mild acid hydrolysis and was found to be mainly glucose for the celA insertion mutant and a mixture of cellobiose, cellotriose, and cellotetrose for the celB and celC insertion mutants. The radioactive compound extracted with chloroform-methanol form the celC insertion mutant was incorporated into cellulose by membrane preparations from celE mutants, which suggests that this compound is a lipid-linked intermediate in cellulose synthesis.

Agrobacterium tumefaciens↗

PubMed1997

Role of scaffolding protein CipC of Clostridium cellulolyticum in cellulose degradation.

The role of a miniscaffolding protein, miniCipC1, forming part of Clostridium cellulolyticum scaffolding protein CipC in insoluble cellulose degradation was investigated. The parameters of the binding of miniCipC1, which contains a family III cellulose-binding domain (CBD), a hydrophilic domain, and a cohesin domain, to four insoluble celluloses were determined. At saturating concentrations, about 8.2 micromol of protein was bound per g of bacterial microcrystalline cellulose, while Avicel, colloidal Avicel, and phosphoric acid-swollen cellulose bound 0.28, 0.38, and 0.55 micromol of miniCipC1 per g, respectively. The dissociation constants measured varied between 1.3 x 10(-7) and 1.5 x 10(-8) M. These results are discussed with regard to the properties of the various substrates. The synergistic action of miniCipC1 and two forms of endoglucanase CelA (with and without the dockerin domain [CelA2 and CelA3, respectively]) in cellulose degradation was also studied. Although only CelA2 interacted with miniCipC1 (K(d), 7 x 10(-9) M), nonhydrolytic miniCipC1 enhanced the activities of endoglucanases CelA2 and CelA3 with all of the insoluble substrates tested. This finding shows that miniCipC1 plays two roles: it increases the enzyme concentration on the cellulose surface and enhances the accessibility of the enzyme to the substrate by modifying the structure of the cellulose, leading to an increased available cellulose surface area. In addition, the data obtained with a hybrid protein, CelA3-CBD(CipC), which was more active towards all of the insoluble substrates tested confirm that the CBD of the scaffolding protein plays an essential role in cellulose degradation.

Bacterial Proteins↗

PubMed1987

Electron microscopic study of the methylcellulose-mediated detachment of cellulolytic rumen bacteria from cellulose fibers.

The presence of methylcellulose prevents the attachment of cellulolytic rumen bacteria to cellulose fibers. The addition of methylcellulose to pure cultures of these organisms in which the cells are already adherent to cellulose causes their detachment from this insoluble substrate and the inhibition of their growth. Methylcellulose is not used as a carbon source by these organisms and has no effect on their growth when glucose and cellobiose are the carbon sources. Attached cells of Bacteroides succinogenes orient themselves in the plane of the individual cellulose fibers and their methylcellulose-induced detachment, which is complete (almost 100%), leaves grooves where the cellulose has been digested. Attached cells of Ruminococcus albus colonize the cellulose in a looser and less regular pattern and their almost complete methylcellulose-induced detachment leaves less regular pits in the cellulose surface. On the other hand, attached cells of Ruminococcus flavefaciens colonize the cellulose surface in a random orientation by means of a discernible exopolysaccharide network, and their less complete methylcellulose-induced detachment leaves no residual impressions on the cellulose surface. These data support the suggestion that bacterial attachment is necessary for the digestion of highly ordered crystalline cellulose, and that cellulolytic species differ in the nature of their attachment to this insoluble substrate and in the nature of their enzymatic attack. Methylcellulose is an effective agent for detaching major rumen cellulolytic bacteria from their cellulosic substrate.

Animals↗

PubMed2002

Effect of short-chain fructooligosaccharides and cellulose on cecal enzyme activities in rats.

The effect of fructooligosaccharides (FOS) on cecal enzyme activity was studied. Adult male Wistar rats were fed a fiber-free diet supplemented with 5% cellulose, a 5% mixture (1:1) of cellulose and FOS or 5% FOS as a source of fiber for 4 weeks. The cecal content was used to measure azoreductase, beta-glucuronidase, beta-glucosidase, nitrate reductase and nitroreductase activities. Cellulose-fed diet increased significantly body weight gain, food intake and fecal stool weight compared to FOS-fed diet. No differences in food intake between FOS-containing diets were found. FOS-containing diets showed statistically higher weight of cecal content and weight of cecal wall compared with the cellulose group. There were significant differences in cecal enzyme activities between cellulose-fed rats and FOS-fed rats. Cellulose-FOS-fed diet decreased significantly nitroreductase, beta-glucuronidase and beta-glucosidase enzymes, but did not differ statistically in azoreductase and nitrate reductase compared with the control group. FOS-fed diet increased significantly reductive enzymes and decreased hydrolytic enzymes compared with the cellulose group. The incorporation of cellulose in diet seems to affect the prebiotic effect of FOS, since both cellulose and FOS are possible substrates for bifidobacteria proliferation. The results suggest that a mixture of cellulose and FOS as a source of dietary fiber could have a healthier effect on bacterial enzyme activities than each type of dietary fiber alone.

Animals↗

PubMed2000

Influence of the degree of polymerization on the behavior of cellulose during homogenization and extrusion/spheronization.

The study objective was to investigate the influence of the degree of polymerization (DP) of cellulose materials (microcrystalline cellulose [MCC] and powder cellulose [PC]) on the behavior of these materials during homogenization and extrusion/spheronization processes. Suspensions of the cellulose types with different DP values were homogenized using a high-pressure homogenizer. The particle size, agglomeration index, and apparent viscosity of these suspensions was determined at different times after pouring. Additionally, these different cellulose types were processed into pellets using the extrusion/spheronization method, and the water content and power consumption as a function of the DP were determined. Cellulose types with a high DP value showed greater particle size after homogenization than the types with a low DP value. In contrast, no relevant relationship between the apparent viscosity and DP could be observed. During the extrusion process, water content in the extrudate and pellet porosity were increased as the DP was increased for the extrudates produced at the same level of power consumption. MCC types with various DPs compared with PC provided a novel way of understanding the role of cellulose in the extrusion process. The DP showed a remarkable influence on the physicochemical properties of the cellulose materials and, consequently, on the behavior of these materials during the extrusion/spheronization process. It is postulated that the sponge model is more appropriate for the cellulose type with high DP (PC), whereas the gel model is more applicable to cellulose types with lower DP (MCC).

Cellulose↗