Experience with Eudragit-S coated mesalamine (Asacol) in inflammatory bowel disease: adverse events.
Explore the source record for details and available documents.
Acrylic Resins↗
SEARCH · PubMed Health
Results for “Polymethacrylic Acids”
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In situ production of a synthetic barrier dressing for burn wounds in rats.
We describe the in situ production of a burn wound dressing applied to eschar that completely isolates burned tissue from contamination with Pseudomonas aeruginosa. Anesthetized, adult rats were subjected to a scald burn over 10% of their body surfaces. One-half hour later a test dressing presumed to be a barrier to bacterial contamination of the wound was applied to the burned surface. Tannic acid, vaseline, ethyl linoleate, collodion, and polyhydroxethylmethacrylate (PHEMA) were evaluated. Each agent was applied directly to the burned surface. A solid film of the PHEMA was produced on the eschar by addition of solvent and a powdered form of the polymer. The surface of each synthetic dressing was contaminated 30 min after application by the addition of 10(8) P. aeruginosa. Also, a control set of rats was burned and their eschars were directly contaminated without application of the test dressing. Seven days later the contaminated muscle under the burned area in 10 control rats had P. aeruginosa counts of 10(7) to 10(8) per g of muscle (wet weight). Of the materials tested, only PHEMA consistently acted as an effective barrier dressing, reducing bacteria in the muscle to undetectable levels in 11 of 14 tests. It was also possible to treat contaminated eschar through this synthetic dressing by topical application of antibiotics to the barrier surface. The results suggest a novel clinical approach in which a barrier dressing could be used to isolate a burn eschar from environmental and subject contamination until the wound site is ready for grafting.
Acrylic Resins↗
Effect of polymer coating on faecal recovery of ingested 5-amino salicylic acid in patients with ulcerative colitis.
It has been suggested that polymer coating might retard jejunal absorption of 5-amino salicylic acid (5-ASA) and thus promote delivery to its colonic site of action. Twenty three patients with active (nine), or quiescent (14) ulcerative colitis were given either uncoated or coated 5-ASA (Asacol) 400 mg qds for one to three weeks, after which they ingested five 1.5 ml dialysis membrane sachets which were recovered from the stool in the next 72 hours. After one week of treatment the concentration of 5-ASA in the faecal dialysate, urine, and fasting plasma in those receiving the coated and uncoated preparations were respectively: 25.4 +/- 5.1 compared with 1.2 +/- 0.4 mmol/l (p less than 0.001); 0.34 +/- 0.21 compared with 0.70 +/- 0.29 mmol/24h (NS) and 11.1 +/- 4.2 compared with 0.07 +/- 0.03 mumol/l (p less than 0.02). Faecal excretion of the drug appeared to be greater in patients with active colitis than in those with quiescent disease. Thus coating with pH dependent methacrylic acid copolymer B is a very effective method of promoting delivery of 5-ASA to the colon, stool dialysate concentrations being 20 fold more than those in controls. Increased trough plasma concentrations in the polymer coating group probably reflect delayed intestinal absorption but no evidence of plasma accumulation after 21 days of therapy was found.
Acrylic Resins↗
Dentin-polymer bond in resin fillings tested in vitro by thermo- and load-cycling.
The effect of stress applied by thermo- and load-cycling to the bond between composite- and bonding-agent-treated dentin was tested. Cylindrical cavities in extracted human teeth, approximately one-half of the margins in dentin, were etched and treated with two bonding agents - Gluma and Clearfil Bond - before being filled with Silux composite. Forty specimens, some provided with cavity floor lining, were cycled several hundred times between 15 degrees and 50 degrees C, either immediately after light-curing or upon 24 hr of water storage. In all cases, microscopic inspection revealed unchanged adaptation at the dentin margins. Teeth with Class 3 and Class 5 cavities, ten of each and with the gingival margins entirely in dentin, were pre-treated and filled as above. The teeth were covered with a dye during loading and unloading in a manner simulating biting and chewing. Inspection of the cavity margins revealed absence of percolation at the dentin margins. It is concluded that effective bonding agents are necessary to prevent contraction gaps in resin-filled cavities where the margins are partly or entirely located in dentin.
Bisphenol A-Glycidyl Methacrylate↗
Preparation and characterization of acrylic hydrogels neutralized by basic amino acids.
Basic amino acids were used as neutralizers in the gellation of Eudispert as an acrylic hydrogel. Arginine and lysine successfully neutralized Eudispert, as did sodium hydroxide, and formed hydrogels. A gentle rise of pH was observed as the dosage of the base increased when arginine and lysine were used, in contrast to the sharp rise of pH observed when sodium hydroxide was used. The rank of viscosity of the prepared hydrogels was as follows: lysine > arginine > NaOH. The release rate of model drugs (salicylic acid, theophylline, and bovine insulin) from the prepared hydrogels ranked as follows: NaOH>lysine>arginine, the sustained-release profile being observed with arginine. The rate of diffusion of the model drug from the hydrogel was inversely proportional to the molecular weight of the cationized neutralizer used. It is concluded that the strategy of neutralization of acidic polymers by basic amino acids has advantage with the respect to both the sustained-release characteristics of the gel and the biocompatibility of the basic amino acids themselves.
Amino Acids↗
Polymer properties on resins composed of UDMA and methacrylates with the carboxyl group.
The properties of dental matrix resins have been improved by synthesis of new monomers. However, except for improvements in water-resistance, monomers with better mechanical properties than Bis-GMA and UDMA could not being synthesized. Changing the point of emphasis, we tried to improve the mechanical properties controlling the matrix resin higher structure using noncovalent bonds. We prepared a matrix resin structured by UDMA, which is a high viscosity base monomer with imino groups, and by a low viscosity acidic monomer with carboxyl groups, which permits noncovalent bonds such as hydrogen bonds or electrostatic interaction with imino groups. The maximal mechanical strength for matrix resins structured by UDMA and an acidic monomer was obtained with a composition of imino groups and carboxyl groups at a ratio of 1:1. This mechanical strength value was higher than those obtained with UDMA resin or with a Bis-GMA/TEGDMA/UDMA resin with typical composition. The improvement in mechanical properties may be due to the complex based on noncovalent bonds, between the imino groups of UDMA and the carboxyl groups of the acidic monomers.
Aminobenzoates↗
Effect of calcium removal on dentin bond strengths.
OBJECTIVE: The purpose of this in vitro study was to determine the microtensile bond strengths (mu TBS) of 3 dental adhesives when applied to dentin decalcified with ethylenediaminetetraacetic acid (EDTA). The null hypothesis tested was that the removal of calcium from dentin would not influence the bond strengths. METHOD AND MATERIALS: Eighteen extracted human molars were cut in 2 equal halves. One half served as the control, having no EDTA treatment, while the other half was assigned to 1 of 3 periods (1 hour, 24 hours, or 100 hours) of decalcification with buffered 0.5 mol/L EDTA. Middle dentin was bonded with 1 of 3 dentin adhesive groups: a self-etching primer, Clearfil SE Bond (SE); an acetone-based total-etch adhesive, Prime&Bond NT (NT); and an ethanol- and water-based total-etch adhesive, Single Bond (SB). The specimens were restored with Z-250 resin composite and sectioned in 0.9 +/- 0.2 mm2 sticks that were tested in tensile mode. RESULTS: For each adhesive, the control group (not decalcified) resulted in statistically higher bond strengths than the treatment groups. For specimens that were not decalcified, SE and SB had statistically similar bond strengths, but both resulted in statistically higher bond strengths than NT. For specimens decalcified for 1 hour, SE resulted in statistically higher bond strengths than either SB or NT, which were ranked in the same statistical group. SE was the only dentin adhesive to result in measurable mu TBS after decalcification with EDTA for 24 hours, while SB/24 hour and NT/24 hour specimens debonded spontaneously prior to testing. All the specimens treated with EDTA for 100 hours debonded prior to testing. CONCLUSION: Three conclusions were drawn: (1) All 3 adhesive systems included in this project bonded significantly better to calcified than to decalcified dentin, regardless of their composition; (2) The self-etching primer-based adhesive ranked consistently equal to or better than the 2 total-etch-based adhesives, regardless of the EDTA decalcification time; and (3) Removal of calcium may be more detrimental for adhesives that rely on dentin acid etching than for adhesives based on self-etching primers.
Acetone↗
[TRIAL TREATMENT OF VARIOUS "PROTEUS" INFECTIONS WITH 2,4-DIAMINO-5-(3,4,5-TRIMETHOXYBENZYL) PYRIMIDINE, OR (TRIM'ETHOPRIME)].
Explore the source record for details and available documents.
Drug Synergism↗
Thermosensitive and biodegradable polymeric micelles with transient stability.
Explore the source record for details and available documents.
Biocompatible Materials↗
Application of solubility parameter theory to dentin-bonding systems and adhesive strength correlations.
The principal aim of this study was to investigate the relationships between the solubility parameters of ectched dentin, and adhesive primer solutions and adhesive bond strength. Solubility parameters characterize the molecular interactions which determine physical properties such as wetting, and thus can serve as tools to aid development of polymeric adhesives and interpenetrating polymer networks. If an adhesive monomer has a solubility parameter close to that of a polymer substrate, then the monomer may act as a solvent for the polymer and penetrate below the surface. Subsequent polymerization of the monomer may then produce an interpenetrating network, thus adhering without necessarily forming primary chemical bonds to the substrate. The dentin substrate considered in this study was abraded dentin treated with ethylenediaminetetraaceitc acid. Solubility parameters delta pr, delta h, and delta d calculated for the etched dentin substrate were 20.3, 23.6, and 16.0 (J/cm3)1/2, respectively. Solubility parameters of the primers were expressed using Hansen's three-dimensional scheme. The data indicate a correlation between the calculated solubility parameters of the etched dentin, and dentin primers and the resulting bond strengths. The results corroborate the significance of solubility parameter considerations for adhesive bonding to dentin.
Acid Etching, Dental↗
Graft copolymer emulsions of sodium alginate with hydroxyalkyl methacrylates for microencapsulation.
A hybrid material with interesting capsule forming properties has been prepared by gamma-initiated polymerization of hydroxyethyl methacrylate (HEMA) or other acrylic monomers in the presence of aqueous sodium alginate. For example, an aqueous solution of HEMA (1 wt%) and sodium alginate (1 wt%) was irradiated in a gamma-source at a dose of 0.15 MR, to produce a stable emulsion which coalesced in the form of a homogeneous precipitate when added to 0.1 M CaCl2. Polymerization of HEMA was presumed to be initiated by free radicals generated in the alginate by gamma-irradiation. The emulsion consisted largely of polyHEMA homopolymer stabilized by an alginate-polyacrylate graft (or block) copolymer of highly branched and ill-defined character, which acts as surfactant to prevent coagulation of the emulsion. Erythrocytes were encapsulated in such an emulsion by extrusion of cell/copolymer emulsion mixture into HEPES buffered CaCl2 (10 mM Ca). Cells appeared intact and functional after encapsulation. By SEM it appeared that the capsule wall consisted of microspheres of polyHEMA on the inner and outer surfaces held together by the alginate. Furthermore the capsule did not contain the internal meshwork, characteristic of calcium alginate homopolymer gels. Although much remains to be learned about these materials, the combination of the easy gelling characteristics of the alginate with the range of desirable properties (e.g. biocompatibility) afforded by the acrylic monomers may have a significant impact on the development of cell microencapsulation technology.
Alginates↗
Using highly carboxylated microspheres to simplify immunoassays and enhance diffusional mixing in a microfluidic device.
Manufacturers of latex immunoassays have typically added surfactants to improve detection sensitivity and prevent non-specific aggregation of microspheres, which may cause both false positives and negatives during diagnostic testing. There is also growing interest in conducting immunoassays in smaller volumes using microfluidic devices with minimum human effort. The first goal of our study was to simplify immunoassays by eliminating the use of surfactants. Our second objective was to determine if this strategy would also enhance diffusional mixing in a microfluidic channel, which has been one of the biggest barriers to using these devices. We first ran a series of cuvette experiments to document the performance of sodium dodecyl sulfate (SDS) and polysorbate 80 (Tween 80) surfactants in a mouse immunoglobulin G (IgG) immunoassay using plain polystyrene microspheres. Next, we tested highly carboxylated microspheres with no surfactants, to determine if the same levels of accuracy and specificity could be achieved. Finally, we evaluated the surfactants and highly carboxylated microspheres in a microfluidic device. Our results show that highly carboxylated microspheres can indeed be used to replace surfactants and to induce rapid mixing via diffusion in a microfluidic device.
Carboxylic Acids↗
Quantitative estimation of film forming polymer-plasticizer interactions by the Lorentz-Lorenz Law.
Molar refraction as well as refractive index has many uses. Beyond confirming the identity and purity of a compound, determination of molecular structure and molecular weight, molar refraction is also used in other estimation schemes, such as in critical properties, surface tension, solubility parameter, molecular polarizability, dipole moment, etc. In the present study molar refraction values of polymer dispersions were determined for the quantitative estimation of film forming polymer-plasticizer interactions. Information can be obtained concerning the extent of interaction between the polymer and the plasticizer from the calculation of molar refraction values of film forming polymer dispersions containing plasticizer.
Chemistry, Pharmaceutical↗
A substrate-independent approach for cyclodextrin functionalized surfaces.
6-Amino-6-deoxy-beta-cyclodextrin can be immobilized onto a range of solid surfaces via reaction with a predeposited pulsed plasma poly(glycidyl methacrylate) layer. X-ray photoelectron spectroscopy, infrared spectroscopy, and quartz crystal microbalance measurements have been employed to monitor guest-host interactions between N,N-dimethylformamide or cholic acid and surface-tethered 6-amino-6-deoxy-beta-cyclodextrin barrels.
Biosensing Techniques↗
Mass spectrometric identification of serum peptides employing derivatized poly(glycidyl methacrylate/divinyl benzene) particles and mu-HPLC.
Biomarkers play a key role in preclinical screening and diagnosis of a disease. Various support materials are utilized for this task, in combination with MALDI-TOF-MS. The way to effectively bind serum contents and their profiling is well-elaborated by the material-enhanced laser desorption ionization (MELDI) approach. In this particular work, focus is placed on the development of a strategy to identify low molecular weight serum peptides. Poly(GMA/DVB) is derivatized in a way to achieve an affinity termed as immobilized metal ion affinity chromatography (IMAC). Iminodiacetic acid (IDA) is used as a chelating ligand, whereas copper (Cu2+) acts as a metal ion for complexing peptides and proteins out of blood serum. Polymer binds the serum compounds over a broad mass range, which includes low mass peptides and high mass albumin (66 kDa). Bound contents are eluted from material by an acetonitrile/trifluoroacetic acid mixture, which proves the reversible nature of metal and amino acid linkage. Polystyrene/divinyl benzene (PS/DVB) monolithic capillary column is used for fractionation through RP-HPLC, prior to the target spotting. The tandem TOF fragment ion mass spectra of each fraction is acquired and used to search against the Swiss-Prot database, using the Mascot search engine for the identification of peptides.
Amino Acid Sequence↗
Wetting characteristic of ceramic to water and adhesive resin.
STATEMENT OF PROBLEM: Maximum wetting of ceramic by adhesive resin is required to achieve optimal adhesion of the resin to ceramic. It is unknown whether the adhesion of the resin to the ceramic is affected by the surface topography and wetting by water or the adhesive resin. PURPOSE: This study was designed to characterize the effect of surface topography on the wetting of ceramics by water and adhesive resin. MATERIALS AND METHODS: Three materials, a veneering ceramic, Eris (ERV), and 2 core ceramics, Empress 1 core ceramic (E1C) and an experimental core ceramic (EXC), were used. Four surface-roughening procedures were used. They included polishing through 1200-grit SiC paper (P), air abrasion with 50 microm Al(2)O(3) (A), etching with 5% hydrofluoric acid gel (E), and a combination of airborne particle abrasion and etching (A/E). Forty bar specimens (15 x 10 x 1.5 mm) were prepared from each material (N=120). Twelve groups of 10 specimens each were prepared for the 4 surface-roughening procedures. Advancing (theta(A)) and receding (theta(R)) contact angles were measured with a CAHN Dynamic Contact Analyzer, on the basis of the Wilhelmy plate technique, with water and adhesive resin. The work of adhesion (W(A)) by the probing media was calculated by use of advancing contact angle data. The data were analyzed by t testing, analysis of variance, and Duncan's tests (alpha=0.05) to determine the statistical significance of differences in the contact angles between ceramic and water or resin as a function of surface roughening. RESULTS: In general, the mean theta(A) values were higher than the mean theta(R) values except for groups of E or A/E specimens with water used as a probing medium. E and A/E treatments yielded the lowest contact angle values, followed by A and P treatments (P<.001). The E1C exhibited the highest mean contact angles, whereas EXC exhibited the lowest mean contact angle except for the theta(R) with resin. The corresponding values for ERV were between those of E1C and EXC except for theta(R) values with resin. The resin medium yielded higher mean contact angles than the water medium for the same surfaces. W(A) ranged from 62.9 to 145.2 mJ/m(2). CONCLUSIONS: Within the limitations of this study, etching or a combination of air abrasion and etching were comparably effective in increasing the surface area for bonding. The most wettable surface as measured by the resin medium was EXC, followed by ERV and E1C.
Acid Etching, Dental↗
Polymers with pH-dependent solubility: possibility of use in the formulation of gastroresistant and controlled-release matrix tablets.
Polymers usually utilized for gastroresistant film coating of tablets or pellets such as cellulose acetate phthalate (CAP), cellulose acetate trimellitate (CAT), hydroxypropylmethylcellulose phthalate (HPMCP), and Eudragit L and S were used in the preparation of drug/polymer matrix tablets. These tablets were prepared either by direct compression of both powders or by the formulation of microspheres that were then compressed. The microspheres were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffractometry analyses. Dissolution studies were finally carried out to verify if the tablets possessed gastroresistant or controlled-release characteristics. Except for Eudragit L, the polymers can be used under certain conditions in the formulation of modified-release tablets.
Acetaminophen↗
Enteric-coated solid dosage forms containing sodium bicarbonate as a drug substance: an exception from the rule?
Sodium bicarbonate (sodium hydrogen carbonate) is used as an oral medication in disorders such as mild metabolic acidosis and chronic kidney disease. The two commercial products on the German market, bicaNorm and Nephrotrans, and also newly developed multiple-unit pellet formulations, have been characterized in these investigations by in-vitro methods like disintegration and dissolution testing. Both marketed products containing sodium bicarbonate are of sufficient pharmaceutical quality according to the European Pharmacopoeia. However, they and the novel pellet preparations showed different drug release at moderately elevated pH values. Early drug release may cause dose dumping in the stomach and adverse drug effects from the developed carbon dioxide. The soft capsule preparation (Nephrotrans) released the smallest amount of sodium bicarbonate at pH 1 and 4.5 of all formulations tested. It appeared that oral dosage formulations of sodium bicarbonate were an exception to the rule: the monolithic soft capsule seemed to be superior to an enteric-coated tablet as well as to multiple-unit pellet formulations from the biopharmaceutical point of view. Our results correspond with individual reports on adverse effects from patients treated with the sodium bicarbonate products.
Capsules↗