SEARCH · PubMed Health

Results for “Pyrolysis”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

PubMed2004

Efficient hydrogen sulfide adsorbents obtained by pyrolysis of sewage sludge derived fertilizer modified with spent mineral oil.

Terrene, sewage sludge derived granulated fertilizer, was impregnated with spent mineral oil and then pyrolyzed at 600, 800, and 950 degrees C. Materials obtained were characterized from the point of view of the pore structure and surface chemistry. Then the H2S breakthrough capacitywas measured using a lab designed test. The results showed that the new adsorbents over perform by 30% materials obtained by simple thermal treatment of Terrene and by 230% virgin coconut shell based activated carbon. The surface reaction products were evaluated using thermal analysis. On the surface of new adsorbents hydrogen sulfide is oxidized mainly to elemental sulfur which is then deposited within the pore system. The breakthrough occurs when all small pores available to promote catalytic oxidation (caused by the inorganic sludge component) are filled with sulfur. An increase in pyrolysis temperature leads to an improvement in the performance of materials as hydrogen sulfide adsorbents. This is caused likely by changes in an inorganic phase and inorganic/carbonaceous phase interactions during pyrolysis.

Adsorption↗

PubMed2003

Characterization of gaseous and solid product from thermal plasma pyrolysis of waste rubber.

Pyrolysis of waste rubber in thermal plasma is studied for the purpose of producing gaseous fuel and recovering carbon black filler. The plasma reactor has a dc arc nitrogen plasma generator with a maximum electric power input of 62.5 kVA and a reaction chamber of 50 mm inner diameter and 1000 mm height. The results of a series of experiments have shown that the main components of the gaseous product are H2, CO, C2H2, CH4, and C2H4; the heat value of the gas is about 5-9 MJ/Nm3. The solid product contains more than 80 wt % elemental carbon, has a surface area of about 65 m2/g, and is referred to as pyrolytic carbon black (CBp). X-ray photoelectron spectroscopy (XPS) analysis has revealed that the CBp has mainly graphitic carbon structure similar to those of commercial carbon black. The CBp may be used as semireinforcing carbon black in nontire rubber applications, or, after upgrading, as carbon black filler for tire. Thus thermal plasma pyrolysis is potentially a useful way of treating waste rubber for resource recovery.

Air Pollutants↗

PubMed2005

Novel incineration technology integrated with drying, pyrolysis, gasification, and combustion of MSW and ashes vitrification.

The conventional mass burn systems for municipal solid waste (MSW) emit large amount of acidic gases and dioxins as well as heavy metals due to the large excess air ratio. Additionally, the final process residues, bottom ash with potential leachability of heavy metals and fly ash with high level of heavy metals and dioxins, also constitute a major environmental problem. To deal with these issues more effectively, a novel MSW incineration technology was developed in this study. MSW drying, pyrolysis, gasification, incineration, and ash vitrification were achieved as a spectrum of combustion by the same equipment (primary chamber) in one step. In practice, the primary chamber of this technology actually acted as both gasifier for organic matter and vitrifying reactor for ashes, and the combustion process was mainly completed in the secondary chamber. Experiments were carried outto examine its characteristics in an industrial MSW incineration plant, located in Taiyuan, with a capability of 100 tons per day (TPD). Results showed that (1) the pyrolysis, gasification, and vitrification processes in the primary chamber presented good behaviors resulting in effluent gases with high contents of combustibles (e.g., CO and CH4) and bottom ash with a low loss-on-ignition (L.o.l), low leachability of heavy metals, and low toxicity of cyanide and fluoride. The vitrified bottom ash was benign to its environment and required no further processing for its potential applications. (2) Low stack emissions of dioxins (0.076 ng of TEQ m(-3)), heavy metals (ranging from 0.013 to 0.033 mg m(-3)), and other air pollutants were achieved. This new technology could effectively dispose Chinese MSW with a low calorific value and high water content; additionally, it also had a low capital and operating costs compared with the imported systems.

Air Pollutants↗

PubMed2005

Formation of bromochlorodibenzo-p-dioxins and furans from the high-temperature pyrolysis of a 2-chlorophenol/2-bromophenol mixture.

The homogeneous, gas-phase pyrolytic thermal degradation of a 50:50 mixture of 2-bromophenol and 2-chlorophenol was studied in a 1 cm i.d., fused silica flow reactor at a total concentration of 88 ppm, reaction time of 2.0 s, and temperatures from 300 to 1000 degrees C. Observed products included (in decreasing yield) naphthalene, dibenzo-p-dioxin (DD), phenol, dibenzofuran (DF), bromobenzene, chloronaphthalene, 4-bromo-6-chlorodibenzofuran (4-B,6-CDF), bromonaphthalene, benzene, 4,6-dichlorodibenzofuran (4,6-DCDF), chlorobenzene, 4-monobromodibenzofuran (4-MBDF), 4-monochlorodibenzofuran (4-MCDF), 1-mono-bromodibenzo-p-dioxin (1-MBDD), 2-chloro,4-bromophenol, 2,4-dibromophenol, and 2-bromo-4-chlorophenol. Unlike the case for the pyrolysis of pure 2-chlorophenol, 4,6-DCDF was observed, but the analogous 4,6-DBDF remained undetected similar to the individual results with 2-MBP. This indicates that the presence of bromine increases the concentration of chlorine atoms available for the formation of 4,6-DCDF. Due to bromine atoms acting as better leaving groups than chlorine atoms, the yield of DD was increased over that observed for the pyrolysis of 2-chlorophenol. The addition of bromine to a chlorinated hydrocarbon system results in an increase in the total yield of PCDD/Fs as well as PBDD/Fs and mixed PBCDD/Fs due to the ease of bromine elimination reactions as well as an increase of the chlorine atom concentration.

Benzofurans↗

PubMed2006

Porous carbon powders prepared by ultrasonic spray pyrolysis.

New, thermally robust meso- and macroporous carbon powders were prepared by ultrasonic spray pyrolysis (USP) of aqueous solutions using an inexpensive high-frequency ultrasound generator from a household humidifier. We choose our molecular precursors rationally, so that the expected decomposition pathways produce only remnant carbon atoms. Specifically, our rational design criterion led to halo-organic carboxylate salts, whose pyrolysis yields well-defined carbon solids with a temporary template being generated in situ, simply an inorganic salt, which is easily dissolved during aqueous workup. The materials have been characterized by SEM, TEM, XRD, 13C NMR MAS, XPS, FTIR spectroscopy, and BET surface area measurements. Changing the alkali metal alters the morphology and pore structure of the final material, which can be explained in terms of the observed differences in the DSC and TGA of the various precursors. This preparatory method provides an extremely facile and versatile method for the generation of meso- and macroporous carbons.

Journal Article↗

PubMed2001

Pyrolysis-GC-MS analysis of the formation and degradation stages of charred residues from lignocellulosic biomass.

The structural transformations undergone by lignocellulosic biomass (freeze-dried rye grass, Lolium rigidum) subjected to progressive isothermal heating (burning at 350 degrees C under oxidizing conditions for 30, 45, 60, 75, and 90 s) have been monitored by Curie-point pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). The pyrograms suggest that even charred residues after severe heating (carbon loss ca. 50%) still contain substantial concentrations of some resistant plant structural components. Several trends were observed when monitoring the relative concentrations of the different groups of pyrolysis compounds released during successive charring stages: (i) the tetrapyrrole moiety of chlorophylls is rapidly destroyed as indicated by the decreasing yields of pyrroles and pyrrolines, whereas the phytol backbone is comparatively more resistant, leading to phytadienes after dehydration and reduction; (ii) the increasing yields of imidazoles from progressively heated samples (maximum at 45 s stage) suggest accumulation of newly formed nitrogen-containing compounds that may survive natural fires; (iii) the lignin backbone shows a relative resistance, the yields of aromatic products pointing to progressive demethoxylation; and, (iv) a selective accumulation of recalcitrant alkyl material occurred, which is interpreted as the result of thermal condensation of hydrocarbons and fatty acids into macromolecular materials in the charred residue. In terms of the intensity of the isothermal heating, the yields of the different classes of alkyl compounds follow the order phytadienes < fatty acids < alkanes < wax esters < sterols.

Biomass↗

PubMed2005

Detoxification of corn stover and corn starch pyrolysis liquors by ligninolytic enzymes of Phanerochaete chrysosporium.

Phanerochaete chrysosporium (ATCC 24725) shake flask culture with 3 mM veratryl alcohol addition on day 3 was able to grow and detoxify different concentrations of diluted corn stover (Dcs) and diluted corn starch (Dst) pyrolysis liquors [10, 25, and 50% (v/v)] in defined media. GC-MS analysis of reaction products showed a decrease and change in some compounds. In addition, the total phenolic assay with Dcs samples demonstrated a decrease in the phenolic compounds. A bioassay employing Lactobacillus casei growth and lactic acid production was developed to confirm the removal of toxic compounds from 10 and 25% (v/v) Dcs and Dst by the lignolytic enzymes, but not from 50% (v/v) Dcs and Dst. The removal did not occur when sodium azide or cycloheximide was added to Ph. chrysosporium culture media, confirming the participation of lignolytic enzymes in the detoxification process. A concentrated enzyme preparation decreased the phenolic compounds in 10% (v/v) corn stover and corn starch pyrolysis liquors to the same extent as the fungal cultures.

Cycloheximide↗

PubMed2000

Flash vacuum pyrolysis of methoxy-substituted lignin model compounds.

The flash vacuum pyrolysis (FVP) of methoxy-substituted beta-O-4 lignin model compounds has been studied at 500 degrees C to provide mechanistic insight into the primary reaction pathways that occur under conditions of fast pyrolysis. FVP of PhCH(2)CH(2)OPh (PPE), a model of the dominant beta-O-4 linkage in lignin, proceeds by C-O and C-C cleavage, in a 37:1 ratio, to produce styrene plus phenol as the dominant products and minor amounts of toluene, bibenzyl, and benzaldehyde. From the deuterium isotope effect in the FVP of PhCD(2)CH(2)OPh, it was shown that C-O cleavage occurs by homolysis and by 1,2-elimination in a ratio of 1.4:1, respectively. Methoxy substituents enhance the homolysis of the beta-O-4 linkage, relative to PPE, in o-CH(3)O-C(6)H(4)OCH(2)CH(2)Ph (o-CH(3)O-PPE) and (o-CH(3)O)(2)-C(6)H(3)OCH(2)CH(2)Ph ((o-CH(3)O)(2)-PPE) by a factor of 7.4 and 21, respectively. The methoxy-substituted phenoxy radicals undergo a complex series of reactions, which are dominated by 1,5-, 1,6-, and 1,4-intramolecular hydrogen abstraction, rearrangement, and beta-scission reactions. In the FVP of o-CH(3)O-PPE, the dominant product, salicylaldehyde, forms from the methoxyphenoxy radical by a 1,5-hydrogen shift to form 2-hydroxyphenoxymethyl radical, 1,2-phenyl shift, and beta-scission of a hydrogen atom. The 2-hydroxyphenoxymethyl radical can also cleave to form formaldehyde and phenol in which the ratio of 1, 2-phenyl shift to beta-scission is ca. 4:1. In the FVP of o-CH(3)O-PPE and (o-CH(3)O)(2)-PPE, products (ca. 20 mol %) are also formed by C-O homolysis of the methoxy group. The resulting phenoxy radicals undergo 1,5- and 1,6-hydrogen shifts in a ratio of ca. 2:1 to the aliphatic or benzylic carbon, respectively, of the phenethyl chain. In the FVP of (o-CH(3)O)(2)-PPE, o-cresol was the dominant product. It was formed by decomposition of 2-hydroxy-3-hydroxymethylbenzaldehyde and 2-hydroxybenzyl alcohol, which are formed from a complex series of reactions from the 2, 6-dimethoxyphenoxy radical. The key step in this reaction sequence was the rapid 1,5-hydrogen shift from 2-hydroxy-3-methoxybenzyloxy radical to 2-hydroxymethyl-6-methoxyphenoxy radical before beta-scission of a hydrogen atom to give the substituted benzaldehyde. The 2-hydroxybenzyl alcohols rapidly decompose under the reaction conditions to o-benzoquinone methide and pick up hydrogen from the reactor walls to form o-cresol.

Biopolymers↗

PubMed2005

Visible light-induced water oxidation on mesoscopic alpha-Fe2O3 films made by ultrasonic spray pyrolysis.

Alpha-Fe(2)O(3) films having a mesoscopic leaflet type structure were produced for the first time by ultrasonic spray pyrolysis (USP) to explore their potential as oxygen-evolving photoanodes. The target of these studies is to use translucent hematite films deposited on conducting fluorine doped tin oxide (FTO) glass as top electrodes in a tandem cell that accomplishes the cleavage of water into hydrogen and oxygen by sunlight. The properties of layers made by USP were compared to those deposited by conventional spray pyrolysis (SP). Although both types of films show similar XRD and UV-visible and Raman spectra, they differ greatly in their morphology. The mesoscopic alpha-Fe(2)O(3) layers produced by USP consist mainly of 100 nm-sized platelets with a thickness of 5-10 nm. These nanosheets are oriented mainly perpendicularly to the FTO support, their flat surface exposing (001) facets. The mesoscopic leaflet structure has the advantage that it allows for efficient harvesting of visible light, while offering at the same time the very short distance required for the photogenerated holes to reach the electrolyte interface before recombining with conduction band electrons. This allows for water oxidation by the valence band holes even though their diffusion length is only a few nanometers. Distances are longer in the particles produced by SP favoring recombination of photoinduced charge carriers. Open-circuit photovoltage measurements indicate a lower surface state density for the nanoplatelets as compared to the round particles. These factors explain the much higher photoactivity of the USP compared to the SP deposited alpha-Fe(2)O(3) layers. Addition of hydrogen peroxide to the alkaline electrolyte further improves the photocurrent-voltage characteristics of films generated by USP indicating the hole transfer from the valence band of the semiconductor oxide to the adsorbed water to be the rate-limiting kinetic step in the oxygen generation reaction.

Journal Article↗

PubMed2005

Structural and electrochemical characterization of nanocrystalline LI[Li0.12Ni0.32Mn(0.56)]O2 synthesized by a polymer-pyrolysis route.

A nanocrystalline Li[Li(0.12)Ni(0.32)Mn(0.56)]O(2) powder was synthesized via the pyrolysis of polyacrylate salt precursors prepared by in situ polymerization of the metal salts and acrylate acid. The pyrolysis mechanism of the polymeric precursor is discussed by use of thermal analysis. Layered crystalline structure of the resulting compound was characterized by powder X-ray diffraction and high-resolution transmission electron (TEM) micrographs. The results revealed that the Li[Li(0.12)Ni(0.32)Mn(0.56)]O(2) as prepared has nanosized morphology and good crystallinity even if calcined at 900 degrees C, and the electrodes made from these nanoparticles exhibited high-rate characteristics and can deliver stable discharge capacity (163 mA.h/g) with excellent capacity retention at appropriate charge-discharge voltage interval. Since this preparation method is simple and particularly suitable for preparation of mixed metal oxides, it can be used for industrial production of highly homogeneous metal oxide cathode materials of the lithium-ion batteries.

Journal Article↗

PubMed2006

Surface characteristics of activated carbons obtained by pyrolysis of plasma pretreated PET.

Activated carbon materials have been prepared by pyrolysis of plasma pretreated recycled PET. The obtained carbon materials have been texturally characterized by N2 (77 K) and CO2 (273 K) adsorption. Atomic force microscopy (AFM) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) have been used to analyze the surface of the treated precursors. Carbon materials obtained by He, N2, and CO2 plasma pretreatments (4 min) of the precursor and subsequent pyrolysis have shown a higher adsorption capacity than the corresponding chars (untreated pyrolised PET). This effect seems to be related to the elimination by the plasma treatments of low-molecular-weight products in the precursor, which are responsible for the formation of amorphous carbon deposits during the carbonization that blocks the porosity. Longer periods of treatment (15 min) do not favor the opening of the microporosity because cross-linking reactions in the precursor producing high molecular weight deposits prevail. The development of porosity is less relevant if oxygen plasma is used, as a considerable amount of oxygen functionalities are also formed. These groups can decompose during pyrolysation producing the above-mentioned amorphous carbon deposits. The textural characteristics of the carbon materials obtained after 4 min of plasma treatment on the precursor are very similar to those obtained after 4 h of CO2 (1073 K) activation of the same char. Therefore, this method can be an alternative to avoid the burnoff and high energy cost of the activation step.

Journal Article↗

PubMed2006

Generation and detection of the peroxyacetyl radical in the pyrolysis of peroxyacetyl nitrate in a supersonic expansion.

The peroxyacetyl radical (PA, CH3C(O)OO) is generated by flash pyrolysis of peroxyacetyl nitrate (PAN, CH3C(O)OONO2) in a supersonic jet. The 0(0)(0) A2A' <-- X2A'' electronic transition for PA, at ca. 5582 cm(-1), is detected in a supersonically cooled sample by time-of-flight mass spectroscopy in the CH3CO mass channel. Rotational envelope simulation results find that the rotational temperature for PA in its ground electronic and vibrational state is ca. 55 K. At ca. 330 degrees C, the thermal decomposition of PAN by flash pyrolysis in a heated nozzle with supersonic expansion is mainly by formation of PA and NO2. The maximum yield of PA is obtained at this temperature. At higher temperatures (300-550 degrees C), an intense signal in the CH2CO+ mass channel is observed, generated by the decomposition of PA.

Journal Article↗

PubMed2006

High pressure pyrolysis of toluene. 2. Modeling benzyl decomposition and formation of soot precursors.

The pyrolysis of toluene, the simplest methyl-substituted aromatic molecule, has been studied behind reflected shock waves using a single pulse shock tube. Part 1 in this two-part series focused on the high-pressure experimental results and the high-pressure limiting rate coefficients for the primary steps in toluene decomposition. The present work focuses on the modeling of benzyl decomposition and the growth of key soot precursors (C2H2, C4H2, C8H6, and indene) from toluene pyrolysis with 81 among the 262 reactions in the detailed toluene model representing the chemistry that describes the formation and decomposition of these species. Feasible pathways for benzyl decomposition as well as phenylacetylene and indene formation have been tested. The simulations also show very good agreement with the single pulse shock tube profiles for the growth of key soot precursors such as C2H2, C4H2, C8H6, and indene.

Journal Article↗

PubMed2006

SANS analysis of the microstructural evolution during the aging of pyrolysis oils from biomass.

In this paper, we report for the first time a microstructural characterization of pyrolysis oils obtained from biomass. Bio crude oils (BCOs) are good candidates as substitutes for mineral oils as fuels. By using small-angle neutron scattering (SANS), we show that BCOs are nanostructured fluids constituted by a complex continuous phase and nanoparticles mainly formed by the association of units of pyrolytic lignins. The aggregation of these units during the time produces branched structures with fractal dimension D(f) between 1.4 and 1.5, which are responsible for BCO aging. SANS results fully support the recently formulated thermal ejection theory, accounting for the mechanism of formation of the lignin fraction in oils obtained from fast pyrolysis of biomass.

Journal Article↗

PubMed1999

Pyrolysis mass spectrometry analysis of free-living and symbiotic cyanobacteria.

The potential of pyrolysis mass spectrometry to distinguish closely related cyanobacterial strains was assessed by using the technique to compare symbiotic cyanobacteria isolated from the hornwort Phaeoceros laevis and free-living cyanobacterial strains at the same field site. The same strains had previously been compared using polymerase chain reaction-based DNA fingerprinting techniques (West & Adams 1997, Appl. Environ. Microbiol. 63: 4479-4484). Many of the strains were grouped identically by the two techniques, although there were some differences, possibly resulting from the ability of these cyanobacteria to develop a range of specialised cell types having different chemical compositions to the vegetative cells. Although growth conditions were chosen to suppress cellular differentiation, this may not always have been completely successful. With careful control of growth conditions pyrolysis mass spectrometry has considerable potential as an additional tool for the phenetic comparison of cyanobacterial strains. It has the advantage that analysis is directly derived from whole cells, and hence is simpler and cheaper than DNA-based methods, although it does require the growth of axenic strains. The technique may be particularly useful in the study of some of the more cryptic unicellular and non-heterocystous filamentous cyanobacterial groups, in which the lack of cellular differentiation should minimise any variability in the chemical composition of cells.

Bacterial Typing Techniques↗

PubMed1985

Low-Mr hydrocarbons generated during hydrous and dry pyrolysis of kerogen.

The validity of applying laboratory pyrolysis experiments to simulating the maturation of organic matter in sedimentary basins has been vigorously debated. We report here results from the generation of hydrocarbons of low relative molecular mass (Mr) in both hydrous and dry pyrolysis. A principal difference is that under dry conditions in the presence of montmorillonite, catalysis occurs with respect to generation of low-Mr hydrocarbons but no such effect is evident for hydrous conditions, probably because of a reduction in the clay's acidity. In addition, olefins which were previously reported as not being present in the products of hydrous pyrolyses were found to be produced in the C2-C6 range in comparable amounts under both hydrous and dry pyrolyses at 300 degrees C and may form in the course of kerogen catagenesis in nature but disappear with geologic time due to their instability. These studies have relevance to understanding the interactions between kerogen and minerals in sedimentary rocks and to processes in the formation of natural gas.

Alkenes↗

PubMed2005

Complex organic matter in Titan's atmospheric aerosols from in situ pyrolysis and analysis.

Aerosols in Titan's atmosphere play an important role in determining its thermal structure. They also serve as sinks for organic vapours and can act as condensation nuclei for the formation of clouds, where the condensation efficiency will depend on the chemical composition of the aerosols. So far, however, no direct information has been available on the chemical composition of these particles. Here we report an in situ chemical analysis of Titan's aerosols by pyrolysis at 600 degrees C. Ammonia (NH3) and hydrogen cyanide (HCN) have been identified as the main pyrolysis products. This clearly shows that the aerosol particles include a solid organic refractory core. NH3 and HCN are gaseous chemical fingerprints of the complex organics that constitute this core, and their presence demonstrates that carbon and nitrogen are in the aerosols.

Aerosols↗

PubMed2001

Characterization of Aphanomyces invadans isolates using pyrolysis mass spectrometry (PyMS).

Twenty-one isolates of Aphanomyces invadans, the fungal pathogen associated with the Asian fish disease epizootic ulcerative syndrome (EUS), were compared with other Oomycete fungi in terms of their pyrolysis mass spectrometry (PvMS) profiles. Canonical variate analysis (CVA) of the pyrolysis mass spectra distinguished the Aphanomyces species from a wide scatter of Achlya and Saprolegnia isolates. Further CVA and hierarchal cluster analysis (HCA) separated the Aphanomyces species into two main groups. The first group clustered A. invadans isolates from EUS outbreaks in Thailand, Bangladesh, Indonesia, Philippines, Australia and Japan together. However, HCA also included the crayfish plague fungus Aphanomyces astaci within this group. Non-pathogenic Aphanomyces strains isolated from ulcerative mycosis (UM)-affected fish were shown to be distinct from A. invadans, and instead clustered with saprophytic Aphanomyces strains to form the second group. Recently, an invasive Aphanomyces pathogen has been isolated from UNI-affected fish, but that was not tested here. This is the first report using PyMS in the study of Oomycete systematics. The technique was not sensitive enough to show any intraspecific differences, but it was considered a useful technique for the discrimination of species where taxonomic relationships are uncertain.

Animals↗