SEARCH · PubMed Health

Results for “Particle Size”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

PubMed1996

Effect of particle size on molten states of starting powder and degradation of the relevant plasma-sprayed hydroxyapatite coatings.

Crystallinity of hydroxyapatite (HA) coatings is an important parameter to evaluate their stability. Variation of the size distribution of the starting powder is one way to alter crystallinity of coatings. The fundamental reason might be the variation of molten states of HA powders with different particle sizes. In the experiments, HA particles sized between 1 and 180 microns were divided into six groups by sieving. It was observed that the trend of crystallinity of coatings on particle size is not linear but fluctuates. The fluctuation of crystallinity was caused by the alteration of molten states of HA powders with different size distributions. It is concluded that the molten state of starting powder also fluctuated with particle size but the trend was different from that of crystallinity. Coatings sprayed with different particle sizes were immersed in deionized water for 1 month. After immersion, severe degradation and break-up were observed on the surface of coatings with the highest crystallinity, which were sprayed with large sized HA powders. It may be the high porosities in these coatings that cause the severe degradation. This shows that high crystallinity is not necessarily related to high stability of coatings and microstructure is of great importance when stability of coatings is considered.

Biocompatible Materials↗

PubMed1996

Methodology to estimate the amount and particle size of soil ingested by children: implications for exposure assessment at waste sites.

Despite considerable efforts to improve the design of soil ingestion studies, substantial variability in daily soil ingestion rates based on different tracer estimates exists in the same subjects. The present study assessed the hypothesis that one of the unexplored causes of this intertracer variation in soil ingestion estimation was related to differences in soil tracer concentration by particle size. The study analyzed the tracer concentration in soil for children in the Anaconda, Montana soil ingestion study for the particle size fraction less than 250 microm [corrected] in diameter. Soil ingestion estimates for these children were recalculated based on the new soil concentration values and compared to previous findings (E. J. Calabrese, E. J. Stanek, P. Pekow, and R. M. Barnes, submitted, 1996) when the soil concentrations were determined for soil particle size diameter of <2 mm. The results indicated that five tracers (Al, Si, Ti, Y, and Zr) did not have their soil concentrations changed by particle size. However, for three tracers (La, Ce, and Nd) the concentration increased by two- to fourfold with the smaller particle size. Recalculation of soil ingestion estimates indicates that the soil ingestion estimates of the five tracers not varying by particle size did not change while those of the remaining three tracers were decreased by approximately 60%. The revised calculations provide a substantial improvement in intertracer estimates of soil ingestion and suggest that the children ingested soil of small particle size. These findings are of significance since they (1) identify an important potential cause of intertracer variability in soil ingestion estimates, (2) establish a new criterion for soil tracer selection, and (3) develop a method for not only providing improved soil ingestion estimates but also determining the particle size of the ingested soil. These findings offer important potential applications for risk assessment practices at contaminated sites since soil ingestion is frequently the dominant route of estimated contaminant exposure in children.

Child↗

PubMed1999

Influence of pigment concentration and particle size on adhesion of an acrylic resin copolymer to tablet compacts.

The effects of the particle size and the concentration of pigments in aqueous polymeric dispersions on the adhesive properties of an acrylic resin copolymer were investigated. Aqueous polymeric dispersions containing up to 20% (v/v) pigment were coated onto hydrophilic and hydrophobic tablet compacts, and polymer adhesion was assessed using a novel butt adhesion technique. An inverse relationship was found between the particle size of the pigment present in the aqueous polymeric dispersion and film-tablet adhesion. As the particle size of the pigment increased, the adhesive strength of the polymer to the tablet compact decreased. Increased concentrations of the opacifying agent titanium dioxide in the acrylic dispersion resulted in stronger film-tablet adhesion. No clear relationship could be established between the wettability of the tablet compact by the pigmented polymeric dispersion and the strength of film-tablet adhesion. The hydrophobicity of the tablet compact was found to affect the glass transition temperature of the polymeric film to a greater extent than the particle size, morphology, or concentration of the pigment incorporated into the acrylic dispersion.

Acrylic Resins↗

PubMed2001

Influence of hay particle size at different concentrate and feeding levels on digestive processes and feed intake in ruminants. 2. Passage, digestibility and feed intake.

In order to study the main effects of particle size, three ruminally fistulated cows (550 to 580 kg BW) were fed a constant low concentrate level (3.56 kg DM/d, 20% of total DMI) and a fibre-rich hay (approximately 60% NDF in DM) in long (28.7 mm), chopped (9.2 mm) and fine ground (2.9 mm) form in a 3 x 3 Latin square design. In another three factorial experiment with 8 wethers (4 animals were ruminally fistulated, mean BW = 68 kg) the main effects and interactions of the above mentioned hay particle sizes at two concentrate levels (10.4 to 13.3% and 29.5 to 40.1% of DMI, resp.) and two intake levels (restricted and ad libitum) were investigated. In comparison to long hay (28.7 mm), feeding of chopped hay (9.2 mm) at low concentrate levels, increased not only the hay intake (7% in dairy cows and 13% in sheep) but also the intake of digestible organic matter (12% in dairy cows and 32% in sheep), due to an increase in the apparent digestibility of OM by 3.8% in dairy cows and 8.2% in sheep. Ad libitum feeding of fine ground hay in combination with low concentrate amount in the ration increased the passage rate in the hindgut and consequently the hay intake, but not the intake of DOM, due to a significant depression of digestibility, especially of fibre fractions (4 to 7% in dairy cows and 4.5 to 14% in sheep), in comparison to 28.7 and 9.2 mm hay particle sizes. The digestibility decreased significantly with restricted feeding of fine ground hay in sheep only in comparison to 9.2 mm particle size. A threefold increase of concentrate amount leveled out all effects of the particle size reduction. The effect of particle size was more pronounced in sheep than in dairy cows.

Animal Feed↗

PubMed2004

Effects of diamond bur particle size on dentin bond strength.

PURPOSE: To evaluate the influence of particle size of originally designed diamond burs on resin adhesion to sound young human permanent dentin. METHODS: The buccal surfaces of 105 premolars were used. Six test groups were prepared. The adhesive systems and resin-based composites used for Groups 1-3 were Clearfil SE Bond (SE) and Clearfil AP-X, and for Groups 4-6, Single Bond (SB) and Z250. Flat dentin surfaces were finely ground with 25 microm particle size IW-G5 diamond bur (IW-G5, Groups 1 and 4), 50 microm particle size IW-G4 diamond bur (IW-G4, Groups 2 and 5), or 600-grit SiC paper (#600, Groups 3 and 6). The microstructure of the prepared dentin, SE primed or SB etched dentin, and resin-dentin interfaces of each group (3 teeth/group) were studied using SEM. Shear bond strengths (SBS) in MPa were tested (10 teeth/group), and the failed surfaces were observed using SEM. Data was statistically analyzed using ANOVA and Fisher's PLSD at P < 0.05. RESULTS: The dentin ground with the IW-G5 or IW-G4 bur was rougher than the dentin ground with the 600-grit SiC paper. The mean SBS (MPa) for Groups 1-6 were: 32.3 +/- 5.0, 27.6 +/- 6.4, 21.3 +/- 3.6, 5.9 +/- 2.9, 6.5 +/- 3.1 and 5.3 +/- 2.0. The SBS of Groups 1-3 (SE groups) were significantly higher than those of Groups 4-6 (SB groups). The SBS of Group 1 (IW-G5, SE group) was significantly higher than those of Groups 2 (IW-G4, SE group) and 3 (#600, SE group), and the SBS of Group 2 was significantly higher than that of Group 3. There was no significant difference for SBS among Groups 4, 5 and 6. Fracture mode after SBS test mainly showed mixed fracture (adhesive and cohesive resin fracture) for the SE groups, and adhesive fracture for the SB groups.

Analysis of Variance↗

PubMed1995

Effects of reducing particle size of corn in lactation diets on energy and nitrogen metabolism in second-parity sows.

Thirty-eight second-parity sows were used to determine the effects of particle size of corn in lactation diets on nutrient metabolism. The sows were fed a corn-soybean meal-based diet with the corn ground to targeted average particle diameters of 1,200, 900, 600, and 400 microns. Loss of BW and backfat and litter performance were not influenced by treatment (P > .10). However, as particle size was reduced from 1,200 to 400 microns, apparent digestibilities of DM (linear effect, P < .001) and N (quadratic effect, P < .007) were increased by 7 and 10%, respectively, and fecal excretions of DM and N were decreased (linear effects, P < .001) by 35 and 42%, respectively. Urinary N excretion was not affected by particle size (P > .20), but there was a trend (P < .08) for the greatest apparent biological values at the intermediate particle sizes (i.e., 900 and 600 microns). Thus, with increased apparent digestibility and no increases in urinary loss, N retention was increased by 22% as particle size of corn was reduced from 1,200 to 600 microns (quadratic effect, P < .04). Digestible energy and ME concentrations of the diets were increased as particle size of corn was reduced from 1,200 to 400 microns (linear effects, P < .001), with a ME value of 3,745 kcal/kg for the diet with corn at 400 microns compared with 3,399 kcal/kg for the diet with corn at 1,200 microns.(ABSTRACT TRUNCATED AT 250 WORDS)

Animal Feed↗

PubMed2003

Effect of particle size of activated clay on the adsorption of paraquat from aqueous solution.

This paper describes the effect of particle size on the process of paraquat adsorption from aqueous solution onto an activated clay surface at 25 degrees C and initial pH 11.0. Measurements of the pore properties of the clay adsorbents with three different particle sizes (0.053-0.074 mm, 0.037-0.053 mm, and <0.037 mm) were carried out. The rates and isotherms of adsorption have been also investigated by batch methods under the controlled conditions. From the experimental results obtained, the adsorption process can be well described with the pseudo-second order model and Freundlich model for adsorption kinetics and adsorption isotherm, respectively. In addition, the effect of the particle size of the clay adsorbent on the adsorption kinetics was found to be of considerable significance; namely, the rate constant (k) of paraquat adsorption by the clay adsorbent decreased with increasing particle size. It was concluded that the pore properties (i.e., surface area and total pore volume) and particle size of the clay adsorbent played a significant role in determining adsorption capacity and adsorption rate, respectively.

Journal Article↗

PubMed1996

Influence of particle size of calcium phosphate ceramics as a capping agent on the formation of a hard tissue barrier in amputated dental pulp.

The purpose of this research was to compare the effect of two different particle sizes of hydroxyapatite and beta-tricalcium phosphate as capping agents on hard tissue barrier formation after experimental pulpotomy in canine dental pulp. By the thirtieth day after pulp exposure and capping with hydroxyapatite-300 (particle size, 300 microns), a hard tissue barrier was formed in 8 of 17 specimens. A newly formed barrier was seen around the hydroxyapatite particles and connecting neighboring particles. Capping with tricalcium phosphate-300 (particle size, 300 microns) led to the formation of a hard tissue barrier surrounding the particles in 11 of 17 specimens. In contrast, using hydroxyapatite-40 (particle size, 40 microns) and beta-tricalcium phosphate-40 (particle size, 40 microns), hard tissue barrier formation was poor and almost all pulp tissues showed infiltrations of inflammatory cells or abscess formation. These findings suggest that the particle size of hydroxyapatite and beta-tricalcium phosphate is an important factor in reparative hard tissue formation.

Animals↗

PubMed1994

Effects of particle size on cell uptake of model triglyceride-rich particles with and without apoprotein E.

The effect of apoprotein E on cellular uptake of "VLDL-size" and "IDL-size" triacylglycerol-phospholipid emulsion particles was studied in J-774 macrophages and fibroblasts. In the absence of apoprotein E (apo E), uptake of the smaller IDL-size particles was up to 2-fold higher by mass and 100-fold higher as calculated by particle number. Apo E enhanced the uptake of both VLDL-size and IDL-size emulsion particles, but the effect was greater on the uptake of larger particles (4-5-fold) as compared to up to a 2-fold increase in the uptake of IDL-size particles. In fibroblasts, particle uptake was less than in macrophages (30-50%), but preferential uptake of smaller particles was similarly observed. Particle internalization was demonstrated by 125I-apo E degradation and resistance to particle release by heparin-suramin. In the absence of apo E, cholesteryl ester of emulsion particles (prepared with trace amounts of [3H]cholesteryl ester) was hydrolyzed to free cholesterol, proving internalization and intracellular metabolism. Double-label experiments using DiI-labeled emulsion particles, in the absence and presence of apo E, showed that emulsion particles are rapidly targeted to perinuclear lysosomes. Thus, at physiological concentrations of triglyceride-rich particles, non-receptor-mediated uptake is a mechanism for the uptake of VLDL-size and IDL-size particles into cells.

Apolipoproteins E↗

PubMed2006

The effect of varying the particle size of beta tricalcium phosphate carrier of recombinant human bone morphogenetic protein-4 on bone formation in rat calvarial defects.

BACKGROUND: Beta tricalcium phosphate (beta-TCP) has been developed as one of the carriers of recombinant human bone morphogenetic protein (rhBMP). However, it is not known whether the particle size of beta-TCP is related to its resorption rate and the degree of bone formation. The purpose of this study was to evaluate the effect of using beta-TCP with different particle sizes on the ability of rhBMP-4 to enhance bone formation in the rat calvarial defect model. METHODS: Calvarial, 8-mm-diameter, critical-size defects were created in 100 male Sprague-Dawley rats. Five groups of 20 animals each received either rhBMP-4 (2.5 microg) using beta-TCP with a particle size of 50 to 150 microm, rhBMP-4 (2.5 microg) using beta-TCP with a particle size of 150 to 500 microm, a beta-TCP control with a particle size of 50 to 150 microm, a beta-TCP control with a particle size of 150 to 500 microm, or a sham-surgery control, respectively, and were evaluated by measuring their histologic and histometric parameters following a 2- and 8-week healing interval. RESULTS: There were no significant differences in the defect closure, new bone area, or augmented area between either the two rhBMP-4/beta-TCP groups or between the two beta-TCP control groups at 2 and 8 weeks. CONCLUSIONS: rhBMP-4 combined with either small- or large-particle beta-TCP had a significant effect on the induction of bone formation compared to either a small- or large-particle beta-TCP control or a sham-surgery control. Within the parameters of this study, varying the particle size of beta-TCP did not seem to have a significant effect on bone formation.

Animals↗

PubMed1988

Effect of particle size on the in vitro and in vivo degradation rates of poly(DL-lactide-co-glycolide) microcapsules.

Three different sieve size fractions of ergot-containing biodegradable microcapsules were examined both in vitro and in vivo. The sieve sizes and average particle diameter, (micron), were: less than 45-75 (mean = 30); 75-106 (mean = 79); 106-177 (mean = 130). These microcapsules contained ca. 9% drug and were produced from 50:50 poly(DL-lactide-co-glycolide). The objective was to determine the effect of particle size on in vivo and in vitro degradation rates. The microcapsules were injected into rat gastrocnemius muscle and excised and examined at various time points up to 70 days. Initially a minimal tissue response was noted which was characterized by a sharply localized acute inflammatory reaction. Following this, connective tissue and foreign body giant cells engulfed the microcapsules at 20-30 days. Only vestiges of the microcapsules were found surrounded by minimal connective tissue and foreign body giant cells after 60-70 days. The tissue reaction was a minimal, sharply localized foreign body giant cell and connective tissue process for all three size groups of microcapsules. The largest microcapsules (mean = 130 microns) exhibited a slightly greater tendency to undergo in vivo and in vitro degradation relative to the other groups. However, it can be concluded that over the microcapsule size ranges examined minimal differences in the degradation properties of the polymeric matrices and consequently those of the microcapsules were noted.

Animals↗

PubMed2006

Effects of rumen acid load from feed and forage particle size on ruminal pH and dry matter intake in the lactating dairy cow.

The objective of this study was to evaluate the effects of level of concentrate acidogenic value (AV) and forage particle size on ruminal pH and feed intake in lactating dairy cows. Two isoenergetic (net energy for lactation = 1.5 +/- 0.01 Mcal/kg) and isonitrogenous (crude protein = 17.4 +/- 0.1% dry matter) concentrates with either a low AV or high AV were formulated and fed in a total mixed ration with either coarsely or finely chopped corn silage and alfalfa haylage ad libitum. Four rumen-fistulated cows (114 +/- 14 d in milk) were randomly assigned to 1 of the 4 treatments in a 4 x 4 Latin square with a 2 x 2 factorial treatment arrangement. Each period consisted of 3-wk (14-d treatment adaptation and 7-d data collection). Increasing the concentrate AV decreased the mean pH (from 6.07 to 5.97) and minimum pH (from 5.49 to 5.34). Cows fed high-AV diets spent a longer time below pH 5.6 (135.1 vs. 236.7 min/d; low-AV diet vs. high-AV diet, respectively) and pH 5.8 (290.0 vs. 480.6 min/d; low-AV diet vs. high-AV diet, respectively) than cows fed low-AV diets. Increasing forage particle size had no effect on the mean and minimum ruminal pH. There was an interaction between concentrate AV and forage particle size on maximum ruminal pH. Increasing forage particle size increased the maximum pH for cows fed the high-AV concentrate (6.69 vs. 6.72; low-AV diet vs. high-AV diet, respectively) and had no effect on the maximum pH for cows fed the low-AV concentrate (6.98 vs. 6.76; low-AV diet vs. high-AV diet, respectively). Increasing the concentrate AV did not affect dry matter intake but reduced neutral detergent fiber intake from 9.7 to 8.8 kg/d. Milk fat content was negatively correlated with time and area below pH 5.6 (time below, r = -0.51; area below, r = -0.56) and pH 5.8 (time below, r = -0.42; area below, r = -0.54). These results suggest that coarse forage particle size can attenuate drops in ruminal pH. However, the ameliorating effects of forage particle size on drops in ruminal pH were more apparent for high-AV diets than for low-AV diets. The AV approach combined with physically effective neutral detergent fiber would therefore improve the formulation of diets and help to mitigate subacute ruminal acidosis in dairy cows.

Animal Feed↗

PubMedDate not supplied

Peroxisome proliferator-activated receptor-gamma agonist increases both low-density lipoprotein cholesterol particle size and small high-density lipoprotein cholesterol in patients with type 2 diabetes independent of diabetic control.

OBJECTIVE: To ascertain whether troglitazone, independent of control of diabetes, increases low-density lipoprotein (LDL) particle size. METHODS: We administered 600 mg of troglitazone (a peroxisome proliferator-activated receptor-gamma agonist) daily for 8 weeks to 10 patients with type 2 diabetes (8 of whom completed the study). Then troglitazone therapy was discontinued, and alternative medication for diabetic control was used for another 4 weeks. The LDL, very-low-density lipoprotein (VLDL), and high-density lipoprotein (HDL) concentrations and subpopulations, as well as blood glucose and hemoglobin A1c (HbA1c), were determined at weeks 0, 4, 8, and 12 and analyzed statistically. RESULTS: Small, dense LDL cholesterol is commonly seen in patients with diabetes and is thought to be associated with an increased risk for coronary artery disease. After both 4 and 8 weeks of troglitazone therapy, control of diabetes was significantly improved (mean HbA1c values at baseline, week 4, and week 8 were 8.0 +/- 0.7%, 7.4 +/- 0.5%, and 7.0 +/- 0.7%, respectively; P<0.05). HbA1c (6.5 +/- 0.6% at 12 weeks) and blood glucose levels (126 +/- 19 mg/dL at 8 weeks versus 145 +/- 9 mg/dL at 12 weeks) were not significantly different 4 weeks after troglitazone therapy was discontinued. Troglitazone treatment increased the large LDL particle at 4 and 8 weeks, a change that significantly (P<0.05) enlarged the LDL particle size (20.5 +/- 0.3 nm, 21.2 +/- 0.3 nm, and 21.3 +/- 0.2 nm at baseline, week 4, and week 8, respectively). After 8 weeks of troglitazone therapy, VLDL triglycerides were reduced (195 +/- 37 mg/dL versus 136 +/- 28 mg/dL; P<0.05) and HDL was increased (31.6 +/- 2.4 mg/dL versus 35.5 +/- 2.9 mg/dL; P<0.05). This greater HDL value was due to an increase in the small HDL particles. A decrease in the larger VLDL particles (V5 and V6) resulted in a reduction in the mean VLDL particle size (59 +/- 3 nm versus 46 +/- 2 nm; P<0.05). Despite the fact that control of diabetes remained significantly improved after troglitazone therapy was discontinued, the LDL particle size decreased to the baseline value. This change was due to a reduction in the large LDL cholesterol particle (L3). CONCLUSION: This study shows that troglitazone therapy increases LDL particle size, reduces VLDL particle size, and increases small HDL particles. These changes may lower the risk for coronary artery disease.

Blood Glucose↗

PubMed1996

An analytic probability density for particle size in human mastication.

In previous studies the distribution of particles sizes of chewed food has been described by an empirical function. However, at the beginning of the chewing process, when many unbroken food particles are still present in the mixture, this function failed to give a good description. In the present study, formulae were derived to characterize the distribution of chewed food particles by size as a function of the number of chewing cycles. The reduction of food particle sizes was considered to be the composite result of a selection and a breakage process. Both processes were described by simple functions. The probability density Pn + 1(x) of finding a particle of size x after n + 1 chewing cycles was computed from Pn(x) by selecting a proportion of particles of size y from Pn to be converted to particles of size x < y by a breakage function. Measures of central tendency--average, median and most probable size--were obtained as a function of the number of chewing cycles. The measures of central tendency characterize the degree of food comminution during the chewing process and so can be used to quantify chewing performance. The comminution of food is described in terms of the selection and breakage functions in a convenient, efficient, analytic way, valid for all phases of the chewing process.

Food↗

PubMed2000

Influence of particle size on the effectiveness of the fiber in barley silage.

We used eight multiparous Holstein cows in a 4 x 4 Latin square design to evaluate the effects and possible interactions between silage particle size and concentrate level on chewing activities and productivity of cows fed barley-based total mixed rations (TMR). Diets were designed with two forage-to-concentrate ratios (low forage, 45:55, high forage 55:45), combined with two theoretical chop lengths of barley silage (short = 4.68 mm and long = 18.75 mm). Diets were formulated to provide similar and above-minimum neutral detergent fiber recommended for cows in early lactation. Increasing silage particle size of the forage did not affect dry matter intake. The 3.5% fat-correct milk and fat yields trended higher for increased particle size. Percent milk protein was higher for short particle size. Increasing the concentrate levels in the diets increased proportions of milk protein and lactose, but not milk fat. Cows fed short silage spent 90 min less per day chewing and ruminating than did those on long silage. Total chewing activity per kilogram of forage intake was higher for cows on long silage compared with those on short silage diets. Although a reduction in silage particle size did not depress milk fat, rumination and chewing activity were significantly reduced. These results suggest that particle size of the silage may have dominant control over chewing activity despite adequate neutral detergent fiber intakes.

Animal Feed↗

PubMed1999

Breathing zone particle size and lead concentration from sanding operations to remove lead based paints.

The relationship between lead concentration in the dry film of lead based paints applied to steel bulkheads aboard ship, the lead concentration found in the air when the paint is removed by mechanical means, and blood lead concentrations of workers involved in lead based paint removal has not been well characterized. Intuitively a direct relationship must exist but confounding factors confuse the issue. Simultaneous sampling procedures from the same paint removal operation may differ by several orders of magnitude. The process from dried film to aerosol (airborne dust) exposure, and on to dose can be separated into two major phases; (1) generation of the dust and its transport through the air to the worker and (2) uptake and dose related factors within the body. Both phases involve complex interactions and there are a number of factors within each phase that significantly affect the potential lead dose for the worker. This study attempts to clarify the mechanisms involved in the generation and transportation of the dust to the worker by evaluating the relationship of a number of key factors on particle size and lead distribution within the aerosol dust generated when lead based paint is removed by sanding. The study examined the relationship between particle size in the dust and grit size of the abrasive. It also examined the distribution of lead within selected particle sizes. The Mass Median Aerodynamic Diameter (MMAD) was used as an indicator of change in the particle size distribution. Particle size distributions were evaluated using a TSI Aerodynamic Particle Sizer, a five stage cyclone and scanning electron microscopy. Lead distribution was determined using the five stage cyclone, and personal or area samples analyzed using inductively coupled plasma (ICP). Mass concentrations were evaluated using a MIE Mass Concentration Analyzer and gravimetric analysis of filter samples collected in the breathing zone. Student's t-tests were used to evaluate changes in MMADs, mass concentrations and other indices for inter and intra-grit size samples. Correlation coefficients (Pearson's r) were used to determine the relationship between factors. Findings of the research indicated that the particle size distribution in the dust is directly related to the grit size of the abrasive (i.e. inversely related to the abrasive grit number). Particulate mass concentrations of dust varied directly with abrasive grit number. The distribution of lead did not appear to be affected by grit size of the abrasive in that the lead distribution within the particle size ranges remained homogeneous and consistent with the lead concentration in the dried film. Mass concentrations of lead in air samples varied directly with lead concentration in the bulk coating. Results of this project, coordinated with deposition modeling and bioavailability studies will be useful in the development of a model to characterize lead dose to workers based on known parameters within the work specifications.

Aerosols↗

PubMed1984

Particle size and surface area distributions of pharmaceutical powders by microcomputerized mercury porosimetry.

The Mayer-Stowe theory was applied to derive the particle size distribution of powders of pharmaceutical interest using mercury porosimetry. Particle size data obtained by this approach are fairly comparable with data derived by other, more popular, techniques such as the electrical sensing zone or the air jet sieving methods provided that the experimental value of the mercury-powder contact angle and the state of aggregation of the powder are carefully studied. Furthermore, by applying the Rootare-Prenzlow method a surface area distribution can also be derived from the same porosimetry data used to obtain the particle size distribution. All experiments were carried out with a microcomputerized mercury porosimeter, which allows storage of data during the analysis and a subsequent fast elaboration at the end of the run, with fully printed data on pore size, pore volume, surface area, and particle size of the powder sample.

Chemistry, Pharmaceutical↗

PubMed1994

Influence of perflubron emulsion particle size on blood half-life and febrile response in rats.

Perfluorochemical (PFC) emulsions are particulate in nature and, as such, can cause delayed febrile reactions when injected intravenously. This study investigated the influence of emulsion particle size on intravascular retention and on body temperature changes in unrestrained conscious rats. Concentrated (60% to 90% w/v) emulsions based on perflubron (perfluorooctyl bromide [PFOB]) with mean particle sizes ranging from 0.05 microns to 0.63 microns were tested. Rats were fitted with a chronic jugular catheter and an abdominal body temperature telemetry unit. Fully recovered, conscious rats were monitored for 24 hours after infusion (dose = 2.7 g PFC/kg). Emulsion blood half-life (T1/2) was determined from blood perflubron levels measured by gas chromatography. Emulsions with a particle size of 0.2-0.3 microns caused fevers (6 to 8 hour duration) which peaked at 1-1.5 degrees C above normal (approximately 37.5 degrees C). Fevers could be blocked by i.v. treatment with either cyclooxygenase inhibitors (ibuprofen) or corticosteroids (dexamethasone). Both intensity and duration of the temperature response, quantified by area under the temperature curve, was decreased significantly for emulsions with a particle size < or = 0.12 micron. Blood T1/2 varied inversely with particle size, and was 3 to 4 fold longer for emulsions with a mean particle size < or = 0.2 micron. Thus, smaller emulsion particles more effectively evaded the reticuloendothelial system, which resulted in longer intravascular retention, less macrophage activity, and reduced febrile responses.

Animals↗