PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Dimerization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Palindromic sequence plays a critical role in human foamy virus dimerization.

The retroviral RNA genome is dimeric, consisting of two identical strands of RNA linked near their 5' ends by a dimer linkage structure. Previously it was shown that human foamy virus (HFV) RNA transcribed in vitro contained three sites, designated SI, SII, and SIII, which contributed to the dimerization process (O. Erlwein, D. Cain, N. Fischer, A. Rethwilm, and M. O. McClure, Virology 229:251-258, 1997). To characterize these sites further, a series of mutants were designed and tested for their ability to dimerize in vitro. The primer binding site and a G tetrad in SI were dispensable for dimerization. However, a mutant that changed the 3' end of SI migrated slower on nondenaturing gels than wild-type RNA dimers. The sequence composition of the SII palindrome, consisting of 10 nucleotides, proved to be critical for in vitro dimerization, since mutations within this sequence or replacement of the sequence with a different palindrome of equal length impaired in vitro dimerization. The length of the palindrome also seems to play an important role. A moderate extension to 12 nucleotides was tolerated, whereas an extension to 16 nucleotides or more impaired dimerization. When nucleotides flanking the palindrome were mutated in a random fashion, dimerization was unaffected. Changing the SIII sequence also led to decreased dimer formation, confirming its contribution to the dimerization process. Interesting mutants were cloned into the infectious molecular clone of HFV, HSRV-2, and were transfected into BHK-21 cells. Mutations in SII that reduced dimerization in vitro also abolished virus replication. In contrast, constructs containing mutations in SI and SIII replicated to some extent in cell culture after an initial drop in viral replication. Analysis of the SIM1 mutant revealed reversion to the wild type but with the insertion of an additional two nucleotides. Analysis of cell-free virions demonstrated that both replication-competent and replication-defective mutants packaged nucleic acid. Thus, efficient dimerization is a critical step for HFV to generate infectious virus, but HFV RNA dimerization is not a prerequisite for packaging.

Animals↗

Single-site modifications of half-ligated hemoglobin reveal autonomous dimer cooperativity within a quaternary T tetramer.

The patterns of energetic response elicited by single-site hemoglobin mutations and chemical modifications have been determined in order to probe the dimer-dimer interface of the half-ligated tetramer (species [21]) that was previously shown to behave as allosterically distinct from both the unligated and fully ligated molecules. In this study the free energies of quaternary assembly (dimers to tetramers) were determined for a series of 24 tetrameric species in which one dimeric half-molecule is ligated (cyanomet hemes) while the adjacent alpha beta dimer is unligated and contains a single amino acid modification. Assembly energies have also been determined for tetramers bearing the same amino acid modifications but where the hemesites were completely vacant and additionally where they were fully occupied. A total of 72 molecular species were thus characterized. It was found that mutationally induced perturbations to the free energy of quaternary assembly were identical for the half-ligated tetramers and the unligated tetramers over the entire spatial distribution of altered sites, but exhibited a radically different pattern from that of the fully ligated molecules. These results indicate that the dimer-dimer interface of the half-ligated tetramer (species [21]) has the same quaternary structure as that of the unligated molecule, i.e., "quaternary T." This quaternary structure assignment of species [21] strongly supports the operation of a Symmetry Rule which translates changes in hemesite ligation into six T-->R quaternary switchpoints. Analysis of the observed Symmetry Rule behavior in relation to the measured distribution of cooperative free energies for the partially ligated species reveals significant cooperativity between alpha and beta subunits of the dimeric half-tetramer within quaternary T. The mutational results indicate that these interactions are not "paid for" by breaking or making noncovalent bonds at the dimer-dimer interface (alpha 1 beta 2). They arise from structural and energetic changes that are "internal" to the ligated dimer even though its association with the unligated dimer is required for the cooperativity to occur. Free energy of "tertiary constraint" is thus generated by the first binding step and is propagated to the second hemesite while the dimer-dimer interface alpha 1 beta 2 serves as a constraint. The "sequential" cooperativity that occurs within the half-molecule is thus preconditioned by the constraint of a quaternary T interface; release of this constraint by dissociation produces only noncooperative dimers.(ABSTRACT TRUNCATED AT 400 WORDS)

Allosteric Regulation↗

Exchange of tubulin dimer into rings in microtubule assembly--disassembly.

We have prepared native radioactive tubulin dimer from two species: [35S]tubulin dimer, by in vivo labeling of rat brain, and porcine [3H]ethyltubulin, as previously described [Zeeberg, B., Cheek, J., & Caplow, M. (1980) Anal. Biochem. 104, 321--327]. After microtubule assembly with radioactive tubulin dimer and nonradioactive dimer and rings, the tubulin in the rings and the dimer obtained upon disassembly have approximately equal specific activities. Therefore, during the reaction sequence dimer + rings leads to 37 degrees C microtubules leads to 0 degrees C dimer + rings the tubulin initially in rings becomes indistinguishable from tubulin initially in dimer. Under nonpolymerizing conditions (0 degrees C) radioactive tubulin dimer and radioactive guanine nucleotide are incorporated into rings at approximately equal rates. This indicates that there is a pathway for nucleotide incorporation into rings under nonpolymerizing conditions which involves the incorporation of dimer-bound nucleotide. We also report results on the lack of the mirror image equilibrium during the disassembly process, using porcine [3H]-ethyltubulin dimer, rat [35S]tubulin dimer, and a [3H]-GDP.porcine tubulin dimer complex. In all three cases there is no significant disassembly-dependent incorporatioin of radioactivity into rings when microtubules are disassembled in the presence of radioactive dimer. These results demonstrate that, for rat and porcine tubulin, rings are formed during microtubule disassembly by direct cleavage of intact rings, without a tubulin dimer intermediate.

Animals↗

Structural requirement for the two-step dimerization of human immunodeficiency virus type 1 genome.

Generation of RNA dimeric form of the human immunodeficiency virus type 1 (HIV-1) genome is crucial for viral replication. The dimerization initiation site (DIS) has been identified as a primary sequence that can form a stem-loop structure with a self-complementary sequence in the loop and a bulge in the stem. It has been reported that HIV-1 RNA fragments containing the DIS form two types of dimers, loose dimers and tight dimers. The loose dimers are spontaneously generated at the physiological temperature and converted into tight dimers by the addition of nucleocapsid protein NCp7. To know the biochemical process in this two-step dimerization reaction, we chemically synthesized a 39-mer RNA covering the entire DIS sequence and also a 23-mer RNA covering the self-complementary loop and its flanking stem within the DIS. Electrophoretic dimerization assays demonstrated that the 39-mer RNA reproduced the two-step dimerization process, whereas the 23-mer RNA immediately formed the tight dimer. Furthermore, deletion of the bulge from the 39-mer RNA prevented the NCp7-assisted tight-dimer formation. Therefore, the whole DIS sequence is necessary and sufficient for the two-step dimerization. Our data suggested that the bulge region regulates the stability of the stem and guides the DIS to the two-step dimerization process.

Capsid↗

Synthesis of cobalamin dimers using isophthalate cross-linking of corrin ring carboxylates and evaluation of their binding to transcobalamin II.

Several cobalamin (Cbl) dimers have been prepared for evaluation as potential antiproliferative agents in the treatment of AIDS-related lymphoma. The Cbl dimers were synthesized by cross-linking Cbl carboxylates, produced by acid hydrolysis of the b-, d-, and e-propionamide side chains of cyanocobalamin (CN-Cbl), through an isophthalate molecule. Linking molecules were used between the Cbl carboxylates and the isophthalate moiety. The linkers were incorporated to provide a distance between the two Cbl molecules such that the dimeric Cbls might bind two molecules of transcobalamin II (TCII), the Cbl transport protein in plasma. Initially, the linking moiety used was 1,12-diaminododecane, but the resulting dimers had low aqueous solubility. To improve the solubility of the dimers, 4,7,10-trioxa-1,13-tridecanediamine was employed as the linking moiety. This improved the water solubility of the dimers considerably, while retaining the distance between the Cbl molecules at 41-42 A (fully extended). To introduce additional substitution on Cbl dimers, 5-aminoisophthalic acid was used as the cross-linking reagent. p-Iodobenzoyl and p-(tri-n-butylstannyl)benzoyl conjugates of 5-aminoisophthalate were synthesized and used to prepare Cbl dimers. The stannylbenzoyl-conjugated Cbl dimers were prepared as precursors to be used in radioiodination reactions, and the iodobenzoyl-conjugated Cbl dimers were prepared as HPLC standards for the radioiodinated product. Attempts to iodinate/radioiodinate the stannylbenzoyl Cbl dimers were unsuccessful. Although an explanation for this is not readily apparent, the failure to react may be due to the lipophilicity of the linker used and the steric environment of the two Cbl moieties. A biotinylated derivative of 5-aminoisophthalate was also synthesized and used to prepare biotinylated-Cbl dimers. In a competitive rhTCII binding assay with [57Co]CN-Cbl, Cbl dimers containing the lipophilic diaminododecane linking moiety had decreased binding avidities compared to those of Cbl monomers substituted at the same corrin ring carboxylate. However, Cbl dimers containing the water-solubilizing trioxadiamine linker appeared to have avidities similar to those of the Cbl monomers.

Antineoplastic Agents↗

Bis(phenylthienyl)ethene-tethered beta-cyclodextrin dimers as photoswitchable hosts.

Two beta-cyclodextrin dimers tethered by photoswitchable bis(phenylthienyl)ethene moieties were synthesized as potentially tunable receptor molecules. The cyclodextrin cavities of these dimers were linked via their secondary sides, with the photochromic bis(phenylthienyl)ethene unit either directly connected to the secondary rim (7) or via propyl spacers (10). By irradiation with light the dimers were reversibly switched between a relatively flexible (open) form and a rigid (closed) form. The photostationary states for both dimers consisted of 92% of the open and 8% of the closed form, enabling the nearly complete conversion between the two forms. The binding properties of the open and closed forms of dimers 7 and 10 were assessed by complexation studies with meso-tetrakis(4-sulfonatophenyl)porphyrin (TSPP) using isothermal titration calorimetry. For the rigidly tethered dimer 7, a factor 8 difference in binding affinity between the open and closed form of the dimer was found. This difference in binding affinity reflects the difference in enthalpy of binding for the two dimers, indicating that the beta-cyclodextrin cavities of the closed dimer 7b are spaced too far apart from each other by the rigid closed bis(phenylthienyl)ethene tether to cooperatively bind TSPP. The difference in binding affinity was sufficient to enable the phototriggered release of TSPP from dimer. The thermodynamic parameters obtained for dimer 10 suggested that the closed tether substantially contributes to the binding of TSPP. The open and closed form of dimer 10 bound TSPP with similar association constants, although the enthalpy of binding for the complexation of TSPP by the closed form of dimer 10 was more favorable than that found for the open form of the dimer.

Calorimetry↗

Dynamic interplay between adhesive and lateral E-cadherin dimers.

E-cadherin, an adhesive transmembrane protein of epithelial adherens junctions, forms two types of detergent-resistant dimers: adhesive dimers consisting of cadherin molecules derived from two neighboring cells and lateral dimers incorporating cadherins of the same cell. Both dimers depend on the integrity of the same residue, Trp156. While the relative amounts of these complexes are not certain, we show here that in epithelial A-431 cells, adhesive dimers may be a prevalent form. Inactivation of the calcium-binding sites, located between successive cadherin ectodomains, drastically reduced the amount of adhesive dimers and concomitantly increased the amount of lateral dimers. A similar interdependence of adhesive and lateral dimers was observed in digitonin-permeabilized cells. In these cells, adhesive dimers immediately disassembled after lowering the Ca2+ concentration below 0.1 mM. The disappearance of adhesive dimers was counterbalanced by an increase in Trp156-dependent lateral dimers. Increasing the calcium concentration to a normal level rapidly restored the original balance between adhesive and lateral dimers. We also present evidence that E-cadherin dimers in vivo have a short lifetime. These observations suggest that cadherin-mediated adhesion is based on the dynamic cycling of E-cadherin between monomeric and adhesive dimer states.

Binding Sites↗

Heterogeneities in ferritin dimers as characterized by gel filtration, nuclear magnetic resonance, electrophoresis, transmission electron microscopy, and gene engineering techniques.

To understand the mechanism underlying the preferential dimerization of ferritin shells, we studied monomers and dimers from both horse spleen and recombinant horse L-apoferritin by using gel filtration, nuclear magnetic resonance, electrophoresis, transmission electron microscopy, and gene engineering techniques. Our study of the kinetics of dimer-monomer dissociation that is produced by heating revealed the presence of at least two types of dimers, namely, weakly and strongly linked dimers with activation energies of 124 +/- 14 and 157 +/- 16 kJ/mol, respectively. Our study using thiol reagents indicated that the dimerization in horse spleen ferritin is partially mediated by disulfide bridges being formed between H-chains. Our analysis of the components that resulted from the dimer-monomer dissociation further clarified that these dimers form interdigitation structures. In summary, five types of dimers were identified in horse spleen apoferritin: reversible dimers with very weak interaction, non-sulfide dimers with weak interaction, non-sulfide dimers with strong interaction, disulfide dimers linked only by disulfide bridges, and disulfide dimers linked by disulfide bridges and having other interactions.

Animals↗

Finite-difference time-domain studies of the optical properties of nanoshell dimers.

The optical properties of metallic nanoshell dimers are investigated using the finite difference time domain (FDTD) method. We discuss issues of numerical convergence specific for the dimer system. We present results for both homodimers and heterodimers. The results show that retardation effects must be taken into account for an accurate description of realistic size nanoparticle dimers. The optical properties of the nanoshell dimer are found to be strongly polarization dependent. Maximal coupling between the nanoshells in a dimer occurs when the electric field of the incident pulse is aligned parallel to the dimer axis. The wavelengths of the peaks in the extinction cross section of the dimer are shown to vary by more than 100 nm, depending on the incident electric field polarization. The calculations show that electric field enhancements in the dimer junctions depend strongly on dimer separation. The maximum field enhancements occur in the dimer junction and at the expense of a reduced electric field enhancement in other regions of space. We investigate the usefulness of nanoshell dimers substrates for SERS by integrating the fourth power of the electric field enhancements around the surfaces of the nanoparticles as a function of dimer separation and wavelength. The SERS efficiency is shown to depend strongly on dimer separation but much weaker than the fourth power of the maximum electric field enhancement at a particular point. The SERS efficiency is also found to depend strongly on the wavelength of the incident light. Maximum SERS efficiency occurs for resonant excitation of the dimer plasmons.

Journal Article↗

Ciprofloxacin dimers target gyrase in Streptococcus pneumoniae.

We have examined the antipneumococcal activities of novel quinolone dimers in which ciprofloxacin was tethered to itself or to pipemidic acid by linkage of C-7 piperazinyl rings. Symmetric 2,6-lutidinyl- and trans-butenyl-linked ciprofloxacin dimers (dimers 1 and 2, respectively) and a pipemidic acid-ciprofloxacin dimer (dimer 3) had activities against Streptococcus pneumoniae strain 7785 that were comparable to that of ciprofloxacin, i.e., MICs of 2, 1, and 4 to 8 microg/ml versus an MIC of 1 to 2 microg/ml, respectively. Surprisingly, unlike ciprofloxacin (which targets topoisomerase IV), several lines of evidence revealed that the dimers act through gyrase in S. pneumoniae. First, ciprofloxacin-resistant parC mutants of strain 7785 remained susceptible to dimers 1 to 3, whereas a gyrA mutation conferred a four- to eightfold increase in the dimer MIC but had little effect on ciprofloxacin activity. Second, dimer 1 selected first-step gyrA (S81Y or S81F) mutants (MICs, 8 to 16 microg/ml) that carried wild-type topoisomerase IV parE-parC genes. Third, dimers 1 and 2 promoted comparable DNA cleavage by S. pneumoniae gyrase and topoisomerase IV, whereas ciprofloxacin-mediated cleavage was 10-fold more efficient with topoisomerase IV than with gyrase. Fourth, the GyrA S81F and ParC S79F enzymes were resistant to dimers, confirming that the resistance phenotype is largely silent in parC mutants. Although a dimer molecule could bind very tightly by bridging quinolone binding sites in the enzyme-DNA complex, the greater potency of ciprofloxacin against gyrase and topoisomerase IV suggests that dimers 1 to 3 bind in a monomeric fashion. The bulky C-7 side chain may explain dimer targeting of gyrase and activity against efflux mutants. Tethered quinolones have potential as mechanistic tools and as novel antimicrobial agents.

Anti-Infective Agents↗

The role of d-dimer as first marker of thrombophilia in women affected by sterility: implications in pathophysiology and diagnosis of thrombophilia induced sterility.

BACKGROUND: D-dimer is considered a marker of hypercoagulable state and of endogenous fibrinolysis, so increased d-dimer is detectable in patients affected by thrombosis. Yet, several studies showed that also infertility, in particular secondary infertility due to recurrent fetal losses, has been often related to thrombotic events, in particular in women carrying thrombotic risk factors such as inherited thrombophilia (MTHFRC677T, PTHRA20210G, Factor V Leiden polimorphisms and/or inhAfter this screening we selected 39erited protein C, protein S, AT III deficiency) or acquired thrombophilia (primary antiphospholipid syndrome, acquired protein C, protein S, AT III deficiency, drugs induced thrombophilia). However, because its high predictive negative value in case of suspected thrombosis, increased d-dimer has been often associated to subclinical thrombophilia. The aim of this study is to investigate the role of d-dimer as first marker of thrombophilia in women affected by unexplained infertility and subsequently to search the cause of increased d-dimer, such as inherited and/or acquired thrombophilia. PATIENTS AND METHODS: We selected 79 patients with unexplained primary or secondary infertility. We excluded 40 patients affected by hydrosalpinx, uterine fibroids, uterine malformations, endocrinological and immunological diseases, luteal insufficiency, cytogenetical alterations. All remaining 39 patients were tested for d-dimer and divided in two groups: the patients of group A (25 patients) showed increased plasma d-dimer, in group B were included 14 patients with normal plasma level of d-dimer. After this step all 39 patients were screened for MTHFRC677T, PTHRA20210G, Factor V Leiden polimorphisms, protein C, protein S, AT III, anticardiolipin IgM and IgG, lupus anticoagulant. In the control group were included 15 age matched women without sterility problems referred to our outpatient's section of vascular medicine for suspected deep venous thrombosis.Statistical analysis was based on chi2 test, differences were considered to be significant if p < 0.05. RESULTS: D-dimer was increased in 25/39 and 20/25 showed inherited/acquired thrombophilia while patients with normal d-dimer showed inherited/acquired thrombophilia in 7/14 (p: < 0.05, s). DISCUSSION: D-dimer is a well known marker of hypercoagulable state, in particular its high predictive negative value in case of suspected thrombosis has been recognised by several reports. Yet, increased d-dimer has been identified also for subclinical thrombophilia besides for vascular thrombosis. Our data, in fact, for the first time suggest an interesting role of d-dimer to identify women affected by unexplained primary or secondary infertility and thrombophilia. So, probably there is a role for d-dimer in these subjects for its predictive positive value. Of course, further data on large based population are needed to confirm our results, because these findings may speed up a diagnostic screening in these patients also for a good cost/effectiveness of this test.

Journal Article↗

D-dimer concentrations in normal pregnancy: new diagnostic thresholds are needed.

BACKGROUND: Pregnancy is known to increase the D-dimer concentration above the conventional normal threshold of 0.50 mg/L, leading to an increased false-positive D-dimer test when venous thromboembolism (VTE) is clinically suspected in a pregnant patient. Our aim was to determine the effect of normal pregnancy on the D-dimer concentration. METHODS: Healthy women who were seeking to become pregnant and had no preexisting condition known to increase the D-dimer concentration were identified. Quantitative D-dimer measurements (MDA turbidimetric assay) and fibrinogen assays were performed before conception, at each trimester, and at 4 weeks postpartum. Patients were excluded for fetal loss or preeclampsia. RESULTS: A total of 50 women were enrolled in the study, and blood samples were obtained at preconception and all trimesters from 23 women. The mean (SD) preconception D-dimer concentration was 0.43 (0.49) mg/L, and 79% of women had a D-dimer concentration <0.50 mg/L. D-Dimer increased with each trimester such that only 22% of women in the second trimester and none (of 23) in the third trimester (95% confidence interval, 0-14%) had a D-dimer concentration <0.50 mg/L. We found no correlation between either the D-dimer and fibrinogen concentrations or between the increases in D-dimer and fibrinogen with pregnancy. CONCLUSIONS: Normal pregnancy causes a progressive increase in circulating D-dimer. The D-dimer test has no use in ruling out VTE in the third trimester if a cutoff of 0.50 mg/L is used. A large management study is needed to establish new thresholds for the D-dimer to rule out VTE in each trimester.

Adult↗

DNA-induced dimerization of the Escherichia coli rep helicase. Allosteric effects of single-stranded and duplex DNA.

The Escherichia coli Rep helicase is a stable monomer (Mr = 72,802) in the absence of DNA; however, binding of single-stranded (ss) or duplex (ds) DNA induces Rep monomers to dimerize. Furthermore, a chemically cross-linked Rep dimer retains both its DNA-dependent ATPase and helicase activities, suggesting that the functionally active Rep helicase is a dimer (Chao, K., and Lohman, T. M. (1991) J. Mol. Biol. 221, 1165-1181). Using a modified "double-filter" nitrocellulose filter binding assay, we have examined quantitatively the equilibrium binding of Rep to a series of ss-oligodeoxynucleotides, d(pN)n (8 less than or equal to n less than or equal to 20) and two 16-base pair duplex oligodeoxynucleotides, which are short enough so that only a single Rep monomer can bind to each oligonucleotide. This strategy has enabled us to examine the linkage between DNA binding and dimerization. We also present a statistical thermodynamic model to describe the DNA-induced Rep dimerization in the presence of ss- and/or ds-oligodeoxynucleotides. We observe quantitative agreement between this model and the experimental binding isotherms and have analyzed these isotherms to obtain the seven independent interaction constants that describe Rep-DNA binding and Rep dimerization. We find that Rep monomers (P) can bind either ss-DNA (S) or ds-DNA (D) to form PS or PD, respectively, which can then dimerize to form P2S or P2D. Furthermore, both protomers of the DNA-induced Rep dimer can bind DNA to form either P2S2, P2D2 or the mixed dimer species P2SD and ss- and ds-DNA compete for the same sites on the Rep protein. When bound to DNA, the Rep dimerization constants are approximately 1-2 x 10(8) M-1 (6 mM NaCl, pH 7.5, 4 degrees C), which are greater than the dimerization constant for free Rep monomers by at least 10(4)-fold. The Rep-ss-DNA interaction constants are independent of base composition and sequence, consistent with its role as a nonspecific DNA-binding protein. Allosteric effects are associated with ss- and ds-DNA binding to the half-saturated Rep dimers, i.e. the affinity of either ss- or ds-DNA to the free promoter of a half-saturated Rep dimer is clearly influenced by the conformation of DNA bound to the first protomer. These allosteric effects further support the proposal that the Rep dimer is functionally important and that the Rep-DNA species P2S2 and P2SD may serve as useful models for intermediates that occur during DNA unwinding.(ABSTRACT TRUNCATED AT 400 WORDS)

Adenosine Triphosphatases↗

Dimers of porcine skeletal muscle lactate dehydrogenase produced by limited proteolysis during reassociation are enzymatically active in the presence of stabilizing salt.

Lactate dehydrogenase from pig skeletal muscle is known to be a "dimer of dimers" stabilized in its tetrameric state by an N-terminal sequence of 20 aminoacid residues. Limited proteolysis of dimeric intermediates of association with thermolysin prevents association of the enzyme to its tetrameric structure. The resulting stable "dimers" are still capable of binding to a Procion Green dinucleotide affinity column. This may indicate that the dimeric intermediates contain the dinucleotide fold of the native enzyme. Since this structural feature is preserved after thermolysin treatment, affinity chromatography may be applied to separate the "dimer" on a preparative scale. Endgroup analysis and peptide mapping of the proteolytic dimer indicates that the reaction product consists of intact chains lacking the "N-terminal arm", apart from "nicked subunits" with fragments of 18 000 and 12 000 molecular weight. According to its hydrodynamic and conformational characteristics (sedimentation velocity and circular dichroism), the "dimer" does not differ significantly from the native enzyme in the backbone structure of its subunits. Its sedimentation properties resemble those of other dimeric dehydrogenases. The spectral data are similar to those observed for the dimeric intermediates that form during reconstitution after acid denaturation. Under standard test conditions, the proteolytic "dimer" (as well as the dimeric intermediate on the pathway of folding) do not show enzymatic activity. However, in the presence of "structure-making ions" like 2 M ammonium sulfate, about 40% of the native catalytic function is restored in the dimeric state. As shown by activity transport measurements in the ultracentrifuge, both the native tetramer and the proteolytic "dimer" maintain their quaternary structure in this solvent.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Tetramer-dimer dissociation in homoglobin and the Bohr effect.

The pH dependence of the apparent tetramer to dimer dissociation constant has been determined at 20 degrees for both oxy- and deoxyhemoglobins A and Kansas. These measurements were made by three different procedures: gel chromatography, sedimentation velocity, and kinetic methods in either of three buffer systems: 0.05 M cacodylate, Tris, or glycine with 1 mM EDTA and 0.1 M NaCl between pH 6.5 and 11. The tetramer-dimer dissociation constant of human oxyhemoglobin A decreases from about 3.2 X 10(-6) M at pH 6.0 to about 3.2 X 10(-8) M at pH 8.5. The slope of this line indicates that the dissociation of tetramer to dimer is accompanied by the uptake of about 0.6 protons per mol of tetramer in this region. The corresponding dissociation constant for deoxyhemoglobin in the same pH region increases apparently almost linearly from 1.0 x 10(-12) M at pH 6.5 to about 1.0 x 10(-5) M at pH 11. To dimer is associated with the release of about 1.6 protons per mol of tetramer. Comparison of these data with the known proton release accompanying the oxygenation of tetramers confirms that the pH dependence of oxygen binding by dimers must be very small. The present data predict that the overall proton release or uptake per oxygen bound by dimer should be less than 0.1. The tetramer-dimer dissociation equilibria of oxy- and deoxyhemoglobins above pH 8.5 have identical pH dependences. In this range the dissociation constant of deoxy-Hb is about one-tenth that of oxyhemoglobin. Human oxyhemoglobin Kansas is known to have an enhanced tetramer-dimer dissociation compared with that of hemoglobin A. Below pH 8.5 the tetramer-dimer dissociation constant of Hb Kansas is about 400 times greater than that of HbA in the absence of phosphate buffers. In contrast, the tetramer-dimer dissociation constants of deoxyhemoglobins A and Kansas appear to be identical. These findings are consistent with previous structural observations on these hemoglobins. The data on the tetramer-dimer dissociation of human hemoglobin were used to calculate the total free energy of binding of oxygen to the tetramer and the median oxygen pressure on the basis of fundamental linkage relations and a pH-independent estimate of the total free energy of binding oxygen to dimer. Simulated oxygen binding curves were generated with the equations of Ackers and Halvorson (Ackers, G. K., and Halvorson, H. (1974) Proc. Natl. Acad. Sci. U.S.A. 71, 4312-4316) by making two assumptions: (a) that the dimers are noncooperative and pH-independent in O2 binding and (b) that the distribution of cooperative energy in the oxygenation of tetramers is independent of pH. We have compared these simulations with experimental data obtained at low protein concentrations (30 to 124 muM heme) to show that the variation in oxygen affinity with pH can be described in terms of the subunit equilibria. We conclude that an accurate analysis of the contributions of individual oxygen binding steps to the Bohr effect cannot be made without considering the contributions of the dimers to oxygen binding...

Hemoglobins↗

Characterization of the dimer interface of transcription factor NFkappaB p50 homodimer.

Dimers of the Rel/NFkappaB transcription factor family form with differential stabilities through the combinatorial association of five polypeptides: p50, p52, p65, cRel, and RelB. Here, we have characterized the nature of the monomer-dimer equilibrium of the p50 homodimer. Sedimentation equilibrium studies show that the equilibrium constant for p50 dimer dissociation is in the low micromolar range. Using the X-ray crystal structure of the p50 homodimer as a guide, we have created site-directed alanine mutations at ten dimer-forming residues in p50 and measured their effects on p50 homodimerization. Characterization of these alanine mutants by a series of chemical crosslinking, size-exclusion chromatography, and sedimentation equilibrium experiments shows that the most critical residue in stabilizing the p50 dimer interface is Y267. Sedimentation equilibrium experiments show that an alanine substitution at position 267 destabilizes the dimer interface by 2.0 kcal/mol. Alanine substitutions at two other positions, L269 and V310, significantly destabilize the p50 dimer interface. These two residues are observed to mediate critical interactions in the crystal structure. Together, these three residues constitute the "hot-spot" of protein-protein interaction in p50 dimerization. Of the four charged residues in the dimer interface, R252, D254, E265, and D302, only D302 contributes significantly to p50 dimer stability. D254 appears to slightly destabilize the subunit interface. Although residues H304, R305, and F307 occupy positions at the hydrophobic core of the interface and appear to be involved in multiple interactions in the X-ray crystal structure, alanine substitutions at these positions do not significantly reduce the affinity for p50 dimerization. Upon evaluating the roles of these amino acid residues at the p50 dimer interface, we propose that differential contributions of a few key residues dictate the selectivity of dimer formation within the Rel/NFkappaB family.

Amino Acid Sequence↗

The carboxyl side chain of glutamate 681 interacts with a chloride binding modifier site that allosterically modulates the dimeric conformational state of band 3 (AE1). Implications for the mechanism of anion/proton cotransport.

Glutamate 681 is thought to be located within the transport channel of band 3 (AE1, the chloride/bicarbonate exchanger), where it acts as a proton donor for the anion/proton cotransport function. Here we show that neutralization of the negative charge on glutamate 681 by chemically modifying band 3 with Woodward's reagent K plus sodium borohydride (i.e., the modification process) exposes a cryptic, conformationally active chloride-binding site which functions to modulate allosterically the conformational state of the band 3 dimer. Chloride binding was determined by measuring the effect of increasing chloride concentration on the rate of DBDS (4,4'-dibenzamido-2,2'-stilbenedisulfonate) release from band 3 using a stopped-flow fluorescence kinetic inhibitor replacement assay with DIDS (4,4'-diisothiocyanato-2,2'-stilbenedisulfonate) as the replacing inhibitor. The time course for DBDS release from unmodified, control band 3 was monophasic and exponential. Chloride binding to the transport site accelerated the rate of DBDS release, with the observed rate constant showing a hyperbolic dependence on chloride concentration, while the total change in reaction fluorescence remained constant. After modification of glutamate 681, DBDS release was monophasic in the absence of chloride, but the rapid addition of chloride at constant ionic strength induced a doubling in the fluorescence quantum yield for the bound DBDS molecules. This was associated with the development of 50:50 biphasic kinetics for DBDS release. Such changes were independent of the degree of modification of the band 3 subunit population between the 66% and 91% levels. Titration of the increase in total reaction fluorescence gave an apparent chloride binding K(d) of between 7 and 10 mM, which is 25-40-fold higher in affinity than chloride binding to the transport site. The dependence of the kinetic constants for both phases of the DBDS release reaction on chloride concentration was nonhyperbolic, which contrasts with unmodified band 3, and is indicative of the presence of two classes of chloride-binding sites on the modified transporter. We have also found that the fraction of subunits capable of binding DBDS reversibly, or DIDS covalently, decreased nonlinearly in the absence of chloride as the level of modification of the band 3 subunit population increased. In contrast, the same DBDS binding correlation plot showed a maximum in the presence of saturating chloride. The observation of such nonlinear correlation plots is consistent with a noncooperative dimer model for the modification process, where each dimeric species must possess different properties with respect to stilbenedisulfonate binding capacity and with respect to the spectral-kinetic response of bound stilbenedisulfonate molecules to the addition of chloride. Within the context of this model, the fractions of the three molecular dimeric species (i.e., the unmodified dimer, the dimer with one subunit modified, and the fully modified band 3 dimer) are calculated as a function of the level of modification of the band 3 subunit population. Nonlinear correlation plots are generated by then assigning the following specific properties to each dimeric species. The unmodified dimer binds DBDS but does not change its fluorescence quantum yield upon addition of chloride. The half-modified dimer binds DBDS on both modified and unmodified subunits, and both of those DBDS molecules increase their fluorescence quantum yield by 2-fold when chloride is added, and the system develops 50:50 biphasic DBDS release kinetics. Finally, the model requires that the fully modified dimer does not bind DBDS or DIDS. This model generates theoretical correlation plots that can represent the data presented in this study. We propose that neutralization of glutamate 681 on the half-modified band 3 dimer exposes an allosteric, chloride-binding modifier site which functions to facilitate the anion/proton cotransport process (a) by blocking the "redocking" of the carboxyl side chain of glutamate (thus raising its pK) and (b) by inducing amate (thus raising its pK) and (b) by inducing a conformational change in the band 3 dimer from a symmetrical to an asymmetrical state.

4,4'-Diisothiocyanostilbene-2,2'-Disulfonic Acid↗

Dimers generated from tetrameric phosphorylating glyceraldehyde-3-phosphate dehydrogenase from Bacillus stearothermophilus are inactive but exhibit cooperativity in NAD binding.

Tetrameric phosphorylating glyceraldehyde-3-phosphate dehydrogenase (GAPDH) from Bacillus stearothermophilus has been described as a "dimer of dimers" with three nonequivalent interfaces, P-axis (between subunits O and P and between subunits Q and R), Q-axis (between subunits O and Q and between subunits P and R), and R-axis interface (between subunits O and R and between subunits P and Q). O-P dimers, the most stable and the easiest to generate, have been created by selective disruption of hydrogen bonds across the R- and Q-axis interfaces by site-directed mutagenesis. Asp-186 and Ser-48, and Glu-276 and Tyr-46, which are hydrogen bond partners across the R- and Q-axis interfaces, respectively, have been replaced with glycine residues. All mutated residues are highly conserved among GAPDHs from different species and are located in loops. Both double mutants D186G/E276G and Y46G/S48G were dimeric, while all single mutants remained tetrameric. As previously described [Clermont, S., Corbier, C., Mely, Y., Gerard, D., Wonacott, A., and Branlant, G. (1993) Biochemistry 32, 10178-10184], NAD binding to wild type GAPDH (wtGAPDH) was interpreted according to the induced-fit model and exhibited negative cooperativity. However, NAD binding to wtGAPDH can be adequately described in terms of two independent dimers with two interacting binding sites in each dimer. Single mutants D186G, E276G, and Y46G exhibited behavior in NAD binding similar to that of the wild type, while both dimeric mutants D186G/E276G and Y46G/S48G exhibited positive cooperativity in binding the coenzyme NAD. The fact that O-P dimer mutants retained cooperative behavior shows that (1) the P-axis interface is important in transmitting the information induced upon NAD binding inside the O-P dimer from one subunit to the other and (2) the S-loop of the R-axis-related subunit is not directly involved in cooperative binding of NAD in the O-P dimer. In both O-P dimer mutants, the absorption band of the binary enzyme-NAD complex had a highly decreased intensity compared to that of the wild type and, in addition, totally disappeared in the presence of G3P or 1,3-dPG. However, no enzymatic activity was detected, indicating that the formed ternary enzyme-NAD-G3P or -1, 3-dPG complex was not catalytically efficient. In the O-P dimers, the interaction with the S-loop of the R-axis-related subunit is disrupted, and therefore, the S-loop should be less structured. This resulted in increased accessibility of the active site to the solvent, particularly for the adenosine-binding site of NAD. Thus, together, this is likely to explain both the lowered affinity of the dimeric enzyme for NAD and the absence of activity.

Amino Acid Substitution↗