SEARCH · PubMed Health

Results for “Solvent accessibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

PubMed1992

Structure of a rapidly formed intermediate in ribonuclease T1 folding.

Kinetic intermediates in protein folding are short-lived and therefore difficult to detect and to characterize. In the folding of polypeptide chains with incorrect isomers of Xaa-Pro peptide bonds the final rate-limiting transition to the native state is slow, since it is coupled to prolyl isomerization. Incorrect prolyl isomers thus act as effective traps for folding intermediates and allow their properties to be studied more easily. We employed this strategy to investigate the mechanism of slow folding of ribonuclease T1. In our experiments we use a mutant form of this protein with a single cis peptide bond at proline 39. During refolding, protein chains with an incorrect trans proline 39 can rapidly form extensive secondary structure. The CD signal in the amide region is regained within the dead-time of stopped-flow mixing (15 ms), indicating a fast formation of the single alpha-helix of ribonuclease T1. This step is correlated with partial formation of a hydrophobic core, because the fluorescence emission maximum of tryptophan 59 is shifted from 349 nm to 325 nm within less than a second. After about 20 s of refolding an intermediate is present that shows about 40% enzymatic activity compared to the completely refolded protein. In addition, the solvent accessibility of tryptophan 59 is drastically reduced in this intermediate and comparable to that of the native state as determined by acrylamide quenching of the tryptophan fluorescence. Activity and quenching measurements have long dead-times and therefore we do not know whether enzymatic activity and solvent accessibility also change in the time range of milliseconds. At this stage of folding at least part of the beta-sheet structure is already present, since it hosts the active site of the enzyme. The trans to cis isomerization of the tyrosine 38-proline 39 peptide bond in the intermediate and consequently the formation of native protein is very slow (tau = 6,500 s at pH 5.0 and 10 degrees C). It is accompanied by an additional increase in tryptophan fluorescence, by the development of the fine structure of the tryptophan emission spectrum, and by the regain of the full enzymatic activity. This indicates that the packing of the hydrophobic core, which involves both tryptophan 59 and proline 39, is optimized in this step. Apparently, refolding polypeptide chains with an incorrect prolyl isomer can very rapidly form partially folded intermediates with native-like properties.

Amino Acid Sequence↗

PubMed2003

Structural background of cyclodextrin-protein interactions.

Cyclodextrins are cyclic oligosaccharides with the shape of a hollow truncated cone. Their exterior is hydrophilic and their cavity is hydrophobic, which gives cyclodextrins the ability to accommodate hydrophobic molecules/moieties in the cavity. This special molecular arrangement accounts for the variety of beneficial effects cyclodextrins have on proteins, which is widely used in pharmacological applications. We have studied the interaction between beta-cyclodextrin and four non-carbohydrate-binding model proteins: ubiquitin, chymotrypsin inhibitor 2 (CI2), S6 and insulin SerB9Asp by NMR spectroscopy at varying structural detail. We demonstrate that the interaction of beta-cyclodextrin and our model proteins takes place at specific sites on the protein surface, and that solvent accessibility of those sites is a necessary but not compelling condition for the occurrence of an interaction. If this behaviour can be generalized, it might explain the wide range of different effects of cyclodextrins on different proteins: aggregation suppression (if residues responsible for aggregation are highly solvent accessible), protection against degradation (if point of attack of a protease is sterically 'masked' by cyclodextrin), alteration of function (if residues involved in function are 'masked' by cyclodextrin). The exact effect of cyclodextrins on a given protein will always be related to the particular structure of this protein.

Cyclodextrins↗

PubMed1992

Two tRNA-binding sites in addition to A and P sites on eukaryotic ribosomes.

The interaction of tRNA with 80 S ribosomes from rabbit liver was studied using biochemical as well as fluorescence techniques. Besides the canonical A and P sites, two additional sites were found which specifically bind deacylated tRNA. One of the sites is analogous to the E site of prokaryotic ribosomes, in that binding of tRNA is labile, does not depend on codon-anticodon interaction, does not protect the anticodon loop from solvent access, and requires the presence of the 3'-terminal adenosine of the tRNA. In contrast, the stability of the tRNA complex with the second site (S site) is high. tRNA binding to the S site is also codon-independent; nevertheless, the anticodon loop is shielded from solvent access. Removal of the 3'-terminal adenosine decreases the affinity of tRNA(Phe) for the S site approximately 50-fold. tRNA(Phe) is retained at the S site during translocation and through poly(Phe) synthesis. Thus, the S site does not seem to be an intermediate site for the tRNA during the elongation cycle. Rather, the tRNA bound to the S site may allosterically modulate the function of the ribosome.

Animals↗

PubMed2002

Mechanisms for regulation of calmodulin kinase IIalpha by Ca(2+)/calmodulin and autophosphorylation of threonine 286.

A mechanism that relates calmodulin (CaM) binding to enzyme activation remains to be established within the context of full-length calmodulin kinase IIalpha (CaM KIIalpha). Previous studies using peptides and/or truncated enzymes have shown that L299 of CaM KIIalpha represents an "anchor" for Ca(2+)/CaM binding and that F293 is required for autoinhibition. We have substituted each of these residues with a W in full-length CaM KIIalpha and measured the W fluorescence to evaluate the location of these side chains in the absence and presence of Ca(2+)/CaM. Fluorescence emission of the L299W mutant indicates that L299 is solvent accessible in the absence of Ca(2+)/CaM but becomes internalized in the presence of Ca(2+)/CaM. On the other hand, examination of F293W indicates that Ca(2+)/CaM binding promotes enzyme activation by transferring F293 from an internal location in the inactive enzyme to a more solvent accessible position in the active enzyme. In addition, F293 interacts with Ca(2+)/CaM as a consequence of autophosphorylation at T286, thus providing a mechanism for CaM trapping. Whereas in the absence of autophosphorylation the exposure of F293 is reversed by dissociation of CaM leading to enzyme autoinhibition, after autophosphorylation of T286, F293 is retained in an exposed position due to dissociation of CaM, consistent with the retention of autonomous activity. Proline mutants were introduced at positions between T286 and F293 to explore the basis of CaM-independent, autonomous activity. The observation that an L290P mutant displayed a high level of activity independent of Ca(2+)/CaM or phosphorylation of T286 indicates that a change in the conformation of the polypeptide main chain at L290 might contribute to the mechanism for generating autophosphorylation-dependent autonomous activity.

Amino Acid Sequence↗

PubMed1998

Prediction of protein hydration sites from sequence by modular neural networks.

The hydration properties of a protein are important determinants of its structure and function. Here, modular neural networks are employed to predict ordered hydration sites using protein sequence information. First, secondary structure and solvent accessibility are predicted from sequence with two separate neural networks. These predictions are used as input together with protein sequences for networks predicting hydration of residues, backbone atoms and sidechains. These networks are trained with protein crystal structures. The prediction of hydration is improved by adding information on secondary structure and solvent accessibility and, using actual values of these properties, residue hydration can be predicted to 77% accuracy with a Matthews coefficient of 0.43. However, predicted property data with an accuracy of 60-70% result in less than half the improvement in predictive performance observed using the actual values. The inclusion of property information allows a smaller sequence window to be used in the networks to predict hydration. It has a greater impact on the accuracy of hydration site prediction for backbone atoms than for sidechains and for non-polar than polar residues. The networks provide insight into the mutual interdependencies between the location of ordered water sites and the structural and chemical characteristics of the protein residues.

Amino Acid Sequence↗

PubMed2000

Side chain accessibility and dynamics in the molten globule state of alpha-lactalbumin: a (19)F-NMR study.

The molten globule state of alpha-lactalbumin (alpha-LA) has been considered a prototype of partially folded proteins. Despite the importance of molten globules in understanding the mechanisms of protein folding and its relevance to some biological phenomena, site-specific information on the structure and dynamics of a molten globule is limited, largely because of the high conformational flexibility and heterogeneity. Here, we use selective isotope labeling and (19)F NMR to investigate the solvent accessibility and side-chain dynamics of aromatic residues in the molten globule of alpha-LA. Comparison of these properties with those of the native and unfolded protein indicates that the alpha-LA molten globule is highly heterogeneous; each residue has its unique solvent accessibility and motional environment. Many aromatic residues normally buried in the interior of native alpha-LA remain significantly buried in the molten globule and the side-chain dynamics of these residues are highly restricted. Our results suggest that hydrophobic and van der Waals interactions mediated by the inaccessible surface area could be sufficient to account for all the stability of the alpha-LA molten globule, which is approximately 50% of the value for the native protein.

Fluorine↗

PubMed1996

The hydration of globular proteins as derived from volume and compressibility measurements: cross correlating thermodynamic and structural data.

We report the first thermodynamic characterization of protein hydration that does not depend on model compound data but rather is based exclusively on macroscopic (volumetric) and microscopic (X-ray) measurements on protein molecules themselves. By combining these macroscopic and microscopic characterizations, we describe a quantitative model that allows one for the first time to predict the partial specific volumes, v(zero), and the partial specific adiabatic compressibilities, ks(zero), of globular proteins from the crystallographic coordinates of the constituent atoms, without using data derived from studies on low-molecular-mass model compounds. Specifically, we have used acoustic and densimetric techniques to determine v(zero) and ks(zero) for 15 globular proteins over a temperature range from 18 to 55 degrees C. For the subset of the 12 proteins with known three-dimensional structures, we calculated the molecular volumes as well as the solvent-accessible surface areas of the constituent charged, polar and nonpolar atomic groups. By combining these measured and calculated properties and applying linear regression analysis, we determined, as a function of temperature, the average hydration contributions to v(zero) and ks(zero) of 1 A2 of the charged, polar, and nonpolar solvent-accessible protein surfaces. We compared these results with those derived from studies on low-molecular-mass compounds to assess the validity of existing models of protein hydration based on small molecule data. This comparison revealed the following features: the hydration contributions to v(zero) and ks(zero) of charged protein surface groups are similar to those of charged groups in small organic molecules. By contrast, the hydration contributions to v(zero) and ks(zero) of polar protein surface groups are qualitatively different from those of polar groups in low-molecular-mass compounds. We suggest that this disparity may reflect the presence of networks of water molecules adjacent to polar protein surface areas, with these networks involving waters from second and third coordination spheres. For nonpolar protein surface groups, we find the ability of low-molecular-mass compounds to model successfully protein properties depends on the temperature domain being examined. Specifically, at room temperatures and below, the hydration contribution to ks(zero) of protein nonpolar surface atomic groups is close to that of nonpolar groups in small organic molecules. By contrast, at higher temperatures, the hydration contribution to ks(zero) of protein nonpolar surface groups becomes more negative than that of nonpolar groups in small organic molecules. We suggest that this behaviour may reflect nonpolar groups on protein surfaces being hydrated independently at low temperatures, while at higher temperatures some of the solvating waters become influenced by neighboring polar groups. We discuss the implications of our aggregate results in terms of various approaches currently being used to describe the hydration properties of globular proteins, particularly focusing on the limitations of existing additive models based on small molecule data.

Crystallography, X-Ray↗

PubMed2000

Energetics of myo-inositol hexasulfate binding to human acidic fibroblast growth factor effect of ionic strength and temperature.

The binding of myo-inositol hexasulfate to an N-terminal truncated 132-amino-acid human acidic fibroblast growth factor form was studied by isothermal titration calorimetry. The technique yields values for the enthalpy change and equilibrium constant, from which the Gibbs energy and entropy change can also be calculated. Experiments in different buffers and pH values show that the proton balance in the reaction is negligible. Experiments at pH 7.0 in the presence of 0.2-0.6 M NaCl showed that the enthalpy and Gibbs energy changes parallel behaviour with ionic strength change, with values in the -21 to -11 kJ x mol(-1) range in the first case and in the -31 to -22 kJ x mol(-1) range in the second. No dependence of entropy on ionic strength was found, with a constant value of approximately 35 J x K(-1) x mol(-1) at all ionic strengths studied. The results can be interpreted in molecular terms by a model in which competitive binding of 3-4 chloride ions to the myo-inositol-binding site is assumed. Isothermal titration calorimetry was also performed at different temperatures and yielded a value of -142+/-13 J x K(-1) x mol(-1) for the heat-capacity change at pH 7.0 and 0.4 M NaCl. Using different parametric equations in the literature, changes on ligand binding in the range -100 to -200 A2 in solvent-accessible surface areas, both polar and apolar, were calculated from thermodynamic data. These values suggest a negligible overall conformational change in the protein when the ligand binds and agree closely with calculations performed with NMR structural data, in which it is shown that the most important negative change in total solvent-accessible surface area occurs in the amino acids Ile56, Gln57, Leu58 and Leu149, in the high-affinity receptor-binding region of the protein.

Calorimetry↗

PubMed2002

Structure of the inhibitory region of troponin by site directed spin labeling electron paramagnetic resonance.

Site-directed spin labeling EPR (SDSL-EPR) was used to determine the structure of the inhibitory region of TnI in the intact cardiac troponin ternary complex. Maeda and collaborators have modeled the inhibitory region of TnI (skeletal 96-112: the structural motif that communicates the Ca(2+) signal to actin) as a kinked alpha-helix [Vassylyev, D., Takeda, S., Wakatsuki, S., Maeda, K. & Maeda, Y. (1998) Proc. Natl. Acad. Sci. USA 95, 4847-4852), whereas Trewhella and collaborators have proposed the same region to be a flexible beta-hairpin [Tung, C. S., Wall, M. E., Gallagher, S. C. & Trewhella, J. (2000) Protein Sci. 9, 1312-1326]. To distinguish between the two models, residues 129-145 of cardiac TnI were mutated sequentially to cysteines and labeled with the extrinsic spin probe, MTSSL. Sequence-dependent solvent accessibility was measured as a change in power saturation of the spin probe in the presence of the relaxation agent. In the ternary complex, the 129-137 region followed a pattern characteristic of a regular 3.6 residues/turn alpha-helix. The following region, residues 138-145, showed no regular pattern in solvent accessibility. Measurements of 4 intradomain distances within the inhibitory sequence, using dipolar EPR, were consistent with an alpha-helical structure. The difference in side-chain mobility between the ternary (C.I.T) and binary (C.I) complexes revealed a region of interaction of TnT located at the N-terminal end of the inhibitory sequence, residues 130-135. The above findings for the troponin complex in solution do not support either of the computational models of the binary complex; however, they are in very good agreement with a preliminary report of the x-ray structure of the cardiac ternary complex [Takeda, S. Yamashita, A., Maeda, K. & Maeda, Y. (2002) Biophys. J. 82, 832].

Animals↗

PubMed1999

Electrospray-assisted modification of proteins: a radical probe of protein structure.

A new approach is described to probe the structure of proteins through their reactivity with oxygen-containing radicals. Radical-induced oxidative modification of proteins is achieved within an electrospray ion source using oxygen as a reactive nebulizer gas at high needle voltages. This method facilitates the rapid oxidation of proteins as the molecules emerge from the electrospray needle tip. Electrospray mass spectra of both ubiquitin and lysozyme reveal that over 50% of the protein can be modified under these conditions. The radical-induced oxidative modification of amino acid side chains is correlated with their solvent accessibility to obtain information on a protein's higher-order structure. The oxidation sites in hen lysozyme have been identified by proteolysis of the condensed protein solution and tandem mass spectrometry (MS/MS). Oxidation of tryptophan at positions 62 and 123 occurs exclusively over all other tryptophan residues, consistent with the relative solvent accessibilities of the residue side chains based on the NMR structure of the protein. Radical-induced oxidative modification of cysteine (Cys), methionine (Met), tryptophan (Trp), phenylalanine (Phe), tyrosine (Tyr), proline (Pro), histidine (His), and leucine (Leu) residues is also reported, providing sufficient reactive markers to span a protein sequence. This facile oxidation process could be applied to investigate the molecular mechanism by which reactive oxygen species interact with a particular protein domain as a means to investigate the onset of certain diseases.

Amino Acid Sequence↗

PubMed1996

Probing HLA-B7 conformational shifts induced by peptide-binding groove mutations and bound peptide with anti-HLA monoclonal antibodies.

To determine the influence of peptide-binding groove residues and MHC-bound peptide on HLA-B7 conformation, we investigated the binding sites of nine locus- or allele-specific mAbs using a panel of 82 HLA-B7 variants. The functional mAb epitopes encircle the HLA-B7 peptide-binding groove. Three mAbs are affected by mutations at solvent-accessible peptide-binding groove mutations. Mutations in peptide-binding groove residues 45, 63, and 150 affect multiple nonoverlapping mAb epitopes, probably by interaction with other MHC residues or bound peptide. However, 18 of 24 peptide-binding groove mutations do not affect mAb binding, indicating that the conformation of solvent-accessible HLA-B7 structures is largely dissociated from changes in the peptide-binding groove. To test whether bound peptides alter HLA-B7 conformation, we loaded HLA-B7 heavy chains on acid-stripped cells with beta2-microglobulin and 20 individual synthetic peptides. Two of eight mAbs are sensitive to HLA-B7-bound peptides. A likely interpretation of these data is that the conformational flexibility of HLA-B7 is due to peptide-induced conformational shifts in MHC side chains, rather than major shifts in the MHC main chain. These results suggest that HLA-B7 conformation is largely maintained in the context of different bound peptides and different peptide-binding grooves.

Antibodies, Monoclonal↗

PubMed2000

Energetics of DNA intercalation reactions.

Isothermal titration calorimetry has been used to determine the binding enthalpy and heat capacity change (DeltaC(p)()) for a series of DNA intercalators, including ethidium, propidium, daunorubicin, and adriamycin. Temperature-dependent binding enthalpies were measured directly for the ligands, from which DeltaC(p)() values of -140 to -160 cal mol(-)(1) K(-)(1) were calculated. Published van't Hoff plots were reanalyzed to obtain DeltaC(p)() values of -337 to -423 cal mol(-)(1) K(-)(1) for the binding of actinomycin D to several DNA oligonucleotide duplexes with defined sequences. Heat capacity changes for DNA intercalation were found to correlate with the alterations in solvent-accessible surface area calculated from available high-resolution structural data. Multiple linear regression was used to derive the relationship DeltaC(p)() = 0. 382(+/-0.026)DeltaA(np) - 0.121(+/-0.077)DeltaA(p) cal mol(-)(1) K(-)(1), where DeltaA(np) and DeltaA(p) are the binding-induced changes in nonpolar and polar solvent-accessible surface areas (in square angstroms), respectively. The DeltaC(p)() terms were used to estimate the hydrophobic contribution to intercalative binding free energies, yielding values that ranged from -11.2 (ethidium) to -30 kcal mol(-)(1) (actinomycin D). An attempt was made to parse the observed binding free energies of ethidium and propidium into five underlying contributions. Such analysis showed that the DNA binding behavior of these simple intercalators is driven almost equally by hydrophobic effects and van der Waals contacts within the intercalation site.

Animals↗

PubMed2026

Dual solvent cavities and hydrogen-bond networks define the chromophore environment in a far-red/orange-sensing cyanobacteriochrome.

Cyanobacteriochromes (CBCRs) are bilin-binding photoreceptors that exhibit remarkable spectral diversity and mediate light-dependent signaling in cyanobacteria. Far-red/orange-sensing CBCRs (froCBCRs) have attracted interest because of their unusually red-shifted absorption properties, yet structural information for their illuminated states has been lacking. Here, we report the first high-resolution (1.8 Å) crystal structure of the orange-absorbing (Po) state of the froCBCR ToFrO from Tolypothrix sp. PCC 7910. The structure reveals a compact, cyclic bilin configuration and water-mediated hydrogen-bonding networks within two solvent-accessible cavities. Within the GAF domain, the D-ring remains nearly perpendicular to the planar A-to-C ring system through interactions involving a flexible loop region. Comparative analyses of cryogenic synchrotron and room-temperature X-ray free-electron laser (XFEL) structures, together with molecular dynamics (MD) simulations, revealed alternative Met636 conformations associated with dynamic water exchange through the solvent-accessible cavity. Site-directed mutagenesis of cavity-lining and water-interacting residues resulted in modest spectral shifts. By contrast, mutations of two Trp residues, participating in π-π stacking with the D-ring and likely imposing a steric constraint near the A-ring, resulted in substantial blue and red shifts in the dark and illuminated states, respectively. Together with the observed chromophore geometry, these findings indicate that the spectral properties of ToFrO are governed by chromophore conformation and its direct interaction with surrounding residues through hydrogen-bonding, electrostatic, and π-π interactions. These results further suggest that cavity-mediated solvent organization contributes to stabilizing the local structural environment surrounding the chromophore and adjacent protein backbone. Collectively, these findings elucidate the structural basis for photoconversion and spectral tuning in froCBCRs.

Cyanobacteria↗

PubMed2006

The marine natural product adociasulfate-2 as a tool to identify the MT-binding region of kinesins.

Kinesins are molecular motors that transport cargo along microtubules (MTs). To move forward the motor must attach to the MT in a defined orientation and detach from it in a process that is driven by ATP hydrolysis. The knowledge of the motor-MT interface is essential for a detailed understanding of how kinesins move along MTs and how they are related to other molecular motors such as myosins or dyneins. We have used the marine natural product adociasulfate-2 (AS-2), previously identified as a MT-competitive inhibitor of conventional kinesin, to infer the secondary structure elements forming the MT interface of two human mitotic kinesins, namely, CENP-E and Eg5. AS-2 inhibits both basal and MT-stimulated ATPase activities of CENP-E (IC50 of 8.6 and 1.3 microM, respectively) and Eg5 (IC50 of 3.5 and 5.3 microM, respectively) and is a MT-competitive inhibitor of CENP-E with a Ki of 0.35 microM. Binding of AS-2 to CENP-E also stimulates the ADP release from the nucleotide-binding pocket. AS-2 is a nonspecific kinesin inhibitor targeting several superfamily members including KHC, MPP1, MKLP1, RabK6, KIFC1, KIFC3, CENP-E, and Eg5. By measuring hydrogen/deuterium exchange with mass spectrometry we have shown that the formation of the CENP-E/AS-2 complex decreases the solvent accessibility of three neighboring peptides on the same face of CENP-E. We deduce that this is the site of MT attachment and conclude that loop L11, helix alpha4, loop L12, helix alpha5, loop L8, and strand beta5 constitute the main MT interface of the CENP-E motor domain. Similarly for Eg5/AS-2, a region of increased solvent accessibility locates the MT interface of Eg5.

Adenosine Triphosphatases↗

PubMed1987

The role of aromatic side chain residues in micelle binding by pancreatic colipase. Fluorescence studies of the porcine and equine proteins.

Fluorescence techniques have been employed to study the interaction of porcine and equine colipase with pure taurodeoxycholate and mixed micelles. Nitrotyrosine-55 of porcine colipase is obtained by modification with tetranitromethane (low excess, in the presence of taurodeoxycholate) of the protein followed by gel filtration and ion-exchange chromatography. Verification of the residue modified was obtained by h.p.l.c. peptide purification and sequence analysis. Reduction and quantitative reaction with dansyl chloride yields a fluorescent derivative that is twice as active in conjunction with lipase as is native colipase and that exhibits a strong emission band at 550 nm. Addition of micellar concentrations of taurodeoxycholate causes a 4.3-fold increase in the emission maximum as well as a 70 nm blue shift to 480 nm. Inclusion of oleic acid to form a mixed micelle reduces these spectral effects. Scatchard analysis of the data yield a Kd of 6.8 X 10(-4) M and a single colipase-binding site for taurodeoxycholate micelles. The data, by analogy to a phospholipase system, are consistent with a direct insertion of dansyl-NH-tyrosine-55 into the micelle. The presence of a single tryptophan residue (Trp-52) in equine colipase provides an intrinsic fluorescent probe for studying protein-micelle interaction. The emission maximum of horse colipase at 345 nm indicates a solvent-accessible tryptophan residue which becomes less so on binding of micelles. A blue shift of 8 nm and a 2-fold increase in amplitude is indicative of a more hydrophobic environment for tryptophan induced by taurodeoxycholate micelles. There is also a decrease in KSV for acrylamide quenching in the presence of micelles, which further supports a loss of solvent accessibility. The most dramatic pH effects are observed with KI quenching, and may indicate the presence of negative charges near Trp-52.

Acrylamide↗

PubMed2001

[Study on Polyethylene Glycol Modified Porcine Hemoglobin Using Computer Modeling]

The structure analysis of porcine hemoglobin alphabeta dimer and the calculation of solvent accessible surface of the amino acids showed the epsilon-amino groups of the lysine are suitable for modification by polyethylene glycol (PEG). The modification of the lysine residues will not affect the carring oxygen capacity of Hb. Three types of linker have been designed to connect PEG and porcine hemoglobin. The lysines between porcine and bovine hemoglobin (pHb and bHb) are highly conserved, but the solvent accessible surface of conserved lysines are different. These suggested that the properties of homologous proteins are similar in pHb and bHb, but the characteristic derived from the homology analysis will be deviated from the actual status. The results of molecular dynamics simulation suggested that the chemical modified porcine hemoglobin would be no immunogenicity.

Journal Article↗

PubMed1999

Atom density in protein structures.

The residue environment in protein structures is studied with respect to the density of carbon (C), oxygen (O), and nitrogen (N) atoms within a certain distance (say 5 A) of each residue. Two types of environments are evaluated: one based on side-chain atom contacts (abbreviated S-S) and the other based on all atom (side-chain + backbone) contacts (abbreviated A-A). Different atom counts are observed about nine-residue structural categories defined by three solvent accessibility levels and three secondary structure states. Among the structural categories, the S-S atom count ratios generally vary more than the A-A atom count ratios because of the fact that the backbone (O) and (N) atoms contribute equal counts. Secondary structure affects the (C) density for the A-A contacts whereas secondary structure has little influence on the (C) density for the S-S contacts. For S-S contacts, a greater density of (O) over (N) atom neighbors stands out in the environment of most amino acid types. By contrast, for A-A contacts, independent of the solvent accessibility levels, the ratio (O)/(N) is approximately 1 in helical states, consistent with the geometry of alpha-helical residues whose side-chains tilt oppositely to the amino to carboxy alpha-helical axis. The highest ratio of neighbor (O)/(N) is achieved under solvent exposed conditions. This (O) vs. (N) prevalence is advantageous at the protein surface that generally exhibits an acid excess that helps to enhance protein solubility in the cell and to avoid nonspecific interactions with phosphate groups of DNA, RNA, and other plasma constituents.

Protein Conformation↗

PubMed2006

BPPred: a Web-based computational tool for predicting biophysical parameters of proteins.

We exploit the availability of recent experimental data on a variety of proteins to develop a Web-based prediction algorithm (BPPred) to calculate several biophysical parameters commonly used to describe the folding process. These parameters include the equilibrium m-values, the length of proteins, and the changes upon unfolding in the solvent-accessible surface area, in the heat capacity, and in the radius of gyration. We also show that the knowledge of any one of these quantities allows an estimate of the others to be obtained, and describe the confidence limits with which these estimations can be made. Furthermore, we discuss how the kinetic m-values, or the Beta Tanford values, may provide an estimate of the solvent-accessible surface area and the radius of gyration of the transition state for protein folding. Taken together, these results suggest that BPPred should represent a valuable tool for interpreting experimental measurements, as well as the results of molecular dynamics simulations.

Algorithms↗