PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

Biomedical solid waste management in an Indian hospital: a case study.

The objectives of this study were: (i) to assess the waste handling and treatment system of hospital bio-medical solid waste and its mandatory compliance with Regulatory Notifications for Bio-medical Waste (Management and Handling) Rules, 1998, under the Environment (Protection Act 1986), Ministry of Environment and Forestry, Govt. of India, at the chosen KLE Society's J. N. Hospital and Medical Research Center, Belgaum, India and (ii) to quantitatively estimate the amount of non-infectious and infectious waste generated in different wards/sections. During the study, it was observed that: (i) the personnel working under the occupier (who has control over the institution to take all steps to ensure biomedical waste is handled without any adverse effects to human health and the environment) were trained to take adequate precautionary measures in handling these bio-hazardous waste materials, (ii) the process of segregation, collection, transport, storage and final disposal of infectious waste was done in compliance with the Standard Procedures, (iii) the final disposal was by incineration in accordance to EPA Rules 1998, (iv) the non-infectious waste was collected separately in different containers and treated as general waste, and (v) on an average about 520 kg of non-infectious and 101 kg of infectious waste is generated per day (about 2.31 kg per day per bed, gross weight comprising both infectious and non-infectious waste). This hospital also extends its facility to the neighboring clinics and hospitals by treating their produced waste for incineration.

Guideline Adherence↗

Composition of source-sorted municipal organic waste collected in Danish cities.

Source-sorted municipal organic waste from different dwelling types in five Danish cities was sampled during one year. The samples were from permanent, full-scale systems or temporary, experimental systems for collection of source-sorted municipal organic waste. Pre-treatment of the organic waste prior to biological treatment was used in all cities to remove foreign objects and provide size reduction. All sampling was performed after pre-treatment in order to obtain more homogeneous and representative samples. The sampling included both the pre-treated waste and the reject from the pre-treatment allowing for estimation of the composition of the original waste. A total of 40 waste samples were chemically characterised with respect to 15 parameters. The waste generally consisted of around 88% VS of which an average of 80% was easily degradable. The average content of N, P and K in the dry matter of the organic waste was 2.5%, 0.4% and 0.9%, respectively. A general analysis of variance was applied to show the influence of the collection system, dwelling type and annual season on the waste composition. The content of plastic and crude fibres in the waste differed the most among the samples, probably due to use of different bag types (plastic and paper) in the different collection systems. Variations in the ash content and the calorific value might be explained by differences in the sorting instructions (whether soil and cat litter are allowed in the organic fraction). Significant seasonal variations were seen for ash, S and Cl. Dwelling type showed no statistically significant influence on any waste components. A test for uniform distribution of the p-values from the analysis of variance (Kolmogorov-Smirnov test) showed that the overall composition of the collected waste was strongly affected by the collection system (city) and season, while dwelling type had no significant influence.

Carbohydrates↗

Veterinary waste disposal: practice and policy in Durban, South Africa (2001-2003).

In South Africa, until recently, veterinary waste has not been included in definitions of health care waste, and so has been neglected as a contributor to the hazardous waste stream. Despite the application of, for example, the "Polluter Pays" principle in South African environmental legislation, to generators of waste, which would include veterinarians, there appears to be little awareness of and even less enforcement of the legislation in this regard. This paper reports on a 2001-2003 survey of management practices of the five waste contractors servicing just over half of the veterinarians in Durban, South Africa's second largest city. Some of their activities, when evaluated in terms of the legislation, guidelines and policies relating to waste handling and disposal, were found to be non-compliant. Since any discussion on waste management should take cognisance of waste from generation to final disposal, the responsibility of veterinarians as waste generators is also discussed in the light of the recent developments in health care waste management in South Africa. This study presents a review of past and current policies, legislation and guidelines that have application to veterinary waste. This is the first study to address veterinary waste disposal in any South African city.

Animals↗

Characterization of char derived from various types of solid wastes from the standpoint of fuel recovery and pretreatment before landfilling.

Carbonization is a kind of pyrolysis process to produce char from organic materials under an inert atmosphere. In this work, chars derived from various solid wastes were characterized from the standpoint of fuel recovery and pretreatment of waste before landfilling. Sixteen kinds of municipal and industrial solid wastes such as residential combustible wastes, non-combustible wastes, bulky wastes, construction and demolition wastes, auto shredder residue, and sludges were carbonized at 500 degrees C for 1h under nitrogen atmosphere. In order to evaluate the quality of char as fuel, proximate analysis and heating value were examined. The composition of raw waste had a significant influence on the quality of produced char. The higher the ratio of woody biomass in waste, the higher heating value of char produced. Moreover, an equation to estimate heating value of char was developed by using the weight fraction of fixed carbon and volatile matter in char. De-ashing and chlorine removal were performed to improve the quality of char. The pulverization and sieving method seems to be effective for separation of incombustibles such as metal rather than ash. Most char met a 0.5 wt% chlorine criterion for utilization as fuel in a shaft blast furnace after it was subjected to repeated water-washing. Carbonization could remove a considerable amount of organic matter from raw waste. In addition, the leaching of heavy metals such as chrome, cadmium, and lead appears to be significantly suppressed by carbonization regardless of the type of raw waste. From these results, carbonization could be considered as a pretreatment method for waste before landfilling, as well as for fuel recovery.

Carbon↗

Application of waste activated bleaching earth containing rapeseed oil on riboflavin production in the culture of Ashbya gossypii.

Waste activated bleaching earth (ABE) that contained 40% rapeseed oil and was discharged by an oil refinery plant, was used for riboflavin production in a culture of Ashbya gossypii. When 125 g/L waste ABE that contained 50 g/L rapeseed oil was added into the culture, the riboflavin concentration was 1.12 g/L, which was almost 1.6-fold as high as that of pure rapeseed oil. However, in waste ABE concentration higher than 125 g/L, the produced riboflavin concentration decreased, which was due to the difficulty in mixing due to the presence of a high amount of solid material in the culture. The surface of the waste ABE was smooth without a hitch, because of being covered with rapeseed oil. However, after the culture, the surface of the waste ABE seemed like that of new one, and the oil content was nearly zero grams per liter. The waste ABE, oily clay, and its black color gradually fade and yellow little by little, and finally the waste ABE changed to yellow powder. Of the riboflavin produced during the culture, 70% was adsorbed in the oil free waste ABE. With diluted alkali solution, extraction only two times yielded 90% recovery of riboflavin adsorbed in the waste ABE. The waste ABE containing waste vegetable oil was suitable for raw material for production of the value-added useful bioproducts, which might be a good model for reuse of the waste resource.

Biodegradation, Environmental↗

Infectious waste surveys in a Saudi Arabian hospital: an important quality improvement tool.

OBJECTIVES: To analyze the composition by weight of the infectious waste stream, better segregate waste, reduce disposal costs, reduce the load on the hospital incinerator, identify inappropriate items having significant cost or safety implications, and provide a safer work environment for housekeepers. METHODS: Four infectious waste surveys were conducted between 1991 and 1999 that involved opening a total of 7364 bags of infectious waste. The contents of each infectious waste bag were separated into 20 different components and weighed. Inappropriately discarded items were removed and tagged with the date and hospital unit of origin. SETTING: Dhahran Health Center, a 410-bed hospital operated by the Saudi Arabian Oil Company (Saudi Aramco) in Dhahran, Saudi Arabia. RESULTS: The surveys show a continuing trend in a higher percentage of plastics and a decrease in paper due to increased use of disposables. Much of the infectious waste consisted of plastic intravenous bottles, intravenous lines, and paper wrappers for sterile instrument sets that were not infectious. Dhahran Health Center was producing a total of 1163 kg of infectious waste per day before the first survey. This was reduced to 407 kg per day after implementation of a waste segregation program in 1991 (a reduction of 65%). Incineration operation was reduced from daily to 3 days per week, with a corresponding reduction in incinerator emissions. Infectious waste from inpatient, surgical, and obstetric areas was reduced by a total of 70% between 1991 and 1999, from 2.8 kg (6.1 lb) to 0.85 kg (1.9 lb) per patient per day. This is in the range of 2 to 4 lb per patient per day that is generally reported. Numerous inappropriately discarded items were discovered during the surveys with cost or safety implications. Each survey, including the latest one of November-December 1999, has shown that further improvements are possible in the hospital's waste management program. Specific educational efforts and changes in procedures are described. CONCLUSIONS: We believe this is the first report of such an extensive analysis of a hospital's infectious waste. Many hospitals do not have the resources to conduct such detailed surveys of their waste streams. However, regardless of the method of treatment and disposal, such surveys are valuable quality improvement tools because all health care facilities want to reduce disposal costs, identify high-value items mistakenly discarded, and improve safety.

Data Collection↗

HIV-related wasting in HIV-infected drug users in the era of highly active antiretroviral therapy.

BACKGROUND: A decrease in the rate of human immunodeficiency virus (HIV) infection-related wasting has been reported in the era of highly active antiretroviral therapy (HAART). We investigated this concern in a hard-to-reach population of HIV-infected drug users in Miami, Florida. METHODS: After informed consent was obtained, 119 HIV-infected drug users were administered questionnaires involving demographic, medical history, and food-security information. Blood samples were drawn for immunological and viral studies. HIV-related wasting over a period of > or =6 months was defined as a body mass index of <18.5 kg/m2, unintentional weight loss of > or =10% over 6 months, or a weight of <90% of the ideal body weight. RESULTS: The prevalence of HIV-related wasting was 17.6%. A significantly higher proportion of those who experienced wasting (81%) reported that there were periods during the previous month when they went for > or =1 day without eating (i.e., food insecurity), compared with those who did not experience wasting (57%). Although a greater percentage of patients who experienced wasting were receiving HAART, their HIV RNA levels were more than twice as high (mean+/-standard deviation [SD], 166,689+/-238,002 copies/mL; median log HIV RNA level +/- SD, 10.2+/-2.7 log10 copies/mL) as those for the group that did not experience wasting (mean+/-SD, 72,156 +/- 149,080; median log HIV RNA level+/-SD, 9.2+/-2.3 log10 copies/mL). Participants who experienced wasting were more likely to be heavy alcohol drinkers and users of cocaine. In multivariate analysis that included age, sex, food security, alcohol use, cocaine use, viral load, and receipt of antiretroviral therapy, the only significant predictors of wasting were > or =1 day without eating during the previous month (odds ratio [OR], 1.96; 95% confidence interval [CI], 1.18-3.26; P=.01) and viral load (OR, 1.64; 95% CI, 1.00-2.69; P=.05). CONCLUSIONS: HIV-related wasting continues to be common among HIV-infected drug users, even among HAART recipients. Food insecurity and viral load were the only independent predictors of wasting. The social and economic conditions affecting the lifestyle of HIV-infected drug users constitute a challenge for prevention and treatment of wasting.

Anti-HIV Agents↗

Overview of personal occupational exposure levels to inhalable dust, endotoxin, beta(1-->3)-glucan and fungal extracellular polysaccharides in the waste management chain.

INTRODUCTION: In the past decade, we studied occupational bioaerosol exposures in various sites of the waste management chain. In this paper we present an overview of exposure levels of inhalable dust, endotoxin, beta(1-->3)-glucan (known or probable inducers of airways inflammation), and extracellular polysaccharide antigens of Aspergillus and Penicillium species (EPS-Pen/Asp; a common and probably more specific marker of fungal exposure). METHODS: Over 450 personal bioaerosol samples were taken. Mixed regression analyses were performed to estimate exposure determinants, between- and within-worker variance of exposure, and determinants of these variances. Furthermore, we explored whether the type of waste affected the bioaerosol composition of the dust. RESULTS: Endotoxin and glucan exposure levels were relatively low and comparable for waste collection and transferral, green waste composting and use of biomass in power plants. Exposure levels were 5-20 times higher in domestic waste transferral with sorting, and composting of both domestic and domestic and green waste ( approximately 300-1000 EU m(-3) for endotoxin, and 5-10 mug m(-3) for glucan). Observed exposure exceeded Dutch occupational exposure limits at all sites. EPS-Pen/Asp exposure was detected in 20% of waste collectors and 49% of compost workers. Exposure variability within tasks was large (geometric standard deviation > 2), with smaller between-worker than within-worker variance. Type of company and waste largely explained between-worker variance (40-90%), although within companies no major task-related determinants could be established. Markers of exposure correlated moderately to strongly. Relative endotoxin and glucan content in the dust was only weakly associated with handled waste. CONCLUSIONS: Occupational bioaerosol exposure in the waste management chain is lowest for outdoor handling of waste and highest when waste is handled indoors. However, exposure variability is large, with greater within-worker than between-worker variance. Occupational exposure limits for organic dust and endotoxins are frequently exceeded, suggesting workers are at risk of developing adverse health effects.

Air Pollutants, Occupational↗

Results of a hospital waste survey in private hospitals in Fars province, Iran.

Hospital waste is considered dangerous because it may possess pathogenic agents and can cause undesirable effects on human health and the environment. In Iran, neither rules have been compiled nor does exact information exist regarding hospital waste management. The survey presented in this article was carried out in all 15 private hospitals of Fars province (Iran) from the total numbers of 50 governmental and private hospitals located in this province, in order to determine the amount of different kinds of waste produced and the present situation of waste management. The results indicated that the waste generation rate is 4.45 kg/bed/day, which includes 1830 kg (71.44%) of domestic waste, 712 kg (27.8%) of infectious waste, and 19.6 kg (0.76%) of sharps. Segregation of the different types of waste is not carried out perfectly. Two (13.3%) of the hospitals use containers without lids for on-site transport of wastes. Nine (60%) of the hospitals are equipped with an incinerator and six of them (40%) have operational problems with the incinerators. In all hospitals municipal workers transport waste outside the hospital premises daily or at the most on alternative days. In the hospitals under study, there aren't any training courses about hospital waste management and the hazards associated with them. The training courses that are provided are either ineffective or unsuitable. Performing extensive studies all over the country, compiling and enacting rules, establishing standards and providing effective personnel training are the main challenges for the concerned authorities and specialists in this field.

Data Collection↗

An analysis of UK waste minimization clubs: key requirements for future cost effective developments.

The UK waste strategy is based upon use of the best practicable environmental option (BPEO), by those making waste management decisions. BPEO is supported by the use of the waste hierarchy, with its range of preferable options for dealing with waste, and the proximity principle, where waste is treated/disposed of as close to its point of origin as possible. The national waste strategy emphasizes the key role of waste minimization and encourages industry, commerce and the public to move towards sustainable waste management practice for economic and environmental reasons. Waste minimization clubs have been used, since the early 1990s, to demonstrate to industry/commerce that reducing waste production can lead to significant financial savings. There have been around 75 such clubs in the UK and they receive support from a wide range of agencies, including the Environmental Technology Best Practice Program. The early Demonstration Clubs had significant savings to cost ratios, e.g. Aire and Calder at 8.4, but had very high costs, e.g. Aire and Calder at 400,000 pounds. It is acknowledged that the number of clubs will have to be approximately doubled in the next few years so as to have an adequate coverage of the UK. There are at present, marked regional variations in club development and cognizance needs to be taken, by facilitators, of the need for extensive coverage of the UK. Future clubs will probably have to operate in a financially constrained climate and they need to be designed to deliver significant savings and waste reduction at low cost. To aid future club design, final reports of all projects should report in a standard manner so that cost benefit analysis can be used to inform facilitators about the most effective club type. rights reserved.

Capital Financing↗

Combustion studies of high moisture content waste in a fluidised bed.

The combustion of three high moisture content waste materials in a fluidised bed combustor has been investigated and a comparison with co-firing of these materials with coal in the same combustor has been made. Waste materials burnt were olive oil waste, municipal solid waste and potato, which is representative of vegetable waste. Mixtures of up to 20% mass concentration water in the waste were fed to the combustor. Above that value the moisture content was too high to sustain combustion without addition of coal. Measurements of CO, NOx, SO2 temperatures were made and the carbon combustion efficiency evaluated. Co-firing with coal resulted in markedly higher combustion efficiencies with an increase of approximately 10-80% when burning the simulated MSW. However, this was much lower than the value of 93% when coal was burnt on its own. It was also much lower than the value obtained, average 90%, when co-firing potato and olive oil waste with coal and there was little difference in the combustion efficiency between the two types of waste and with increasing moisture content. It was concluded that the high ash content of the simulated MSW 26%, compared with 5% in the other two waste materials resulted in slower burning and consequently the char particles were elutriated from the bed without being fully burnt. In term of gaseous emissions during co-combustion, CO emission is relatively insensitive to change in waste fraction. While emission of SO2 can be reduced as the waste fraction increases as a result of fuel-S dilution. But in terms of percent fuel-S converted, it is actually increased by increasing waste fraction. Emissions of NO and N2O increase slightly with MSW fraction.

Air Pollutants↗

Leaching of lead from computer printed wire boards and cathode ray tubes by municipal solid waste landfill leachates.

The proper management of discarded electronic devices (E-waste) is an important issue for solid waste professionals because of the magnitude of the waste stream and because these devices often contain a variety of toxic metals (e.g., lead). While recycling of E-waste is developing, much of this waste stream is disposed in landfills. Leaching tests are frequently used to characterize the potential of a solid waste to leach when disposed in a landfill. In the United States, the Toxicity Characteristic Leaching Procedure (TCLP) is used to determine whether a solid waste is a hazardous waste by the toxicity characteristic. The TCLP is designed to simulate worse-case leaching in a landfill environment where the waste is co-disposed with municipal solid waste (MSW). While the TCLP is a required analysis from a regulatory perspective, the leachate concentrations measured may not accurately reflect the concentrations observed under typical landfill conditions. Another method that can be performed to assess the degree a pollutant might leach from a waste in a landfill is to use actual landfill leachate as the leaching solution. In this study, two lead-containing components found in electronic devices (printed wire boards from computers and cathode ray tubes from computers and televisions) were leached using the TCLP and leachates from 11 Florida landfills. California's Waste Extraction Test (WET) and the Synthetic Precipitation Leaching Procedure were also performed. The results indicated that the extractions using MSW landfill leachates resulted in lower lead concentrations than those by the TCLP. The pH of the leaching solution and the ability of the organic acids in the TCLP and WET to complex with the lead are factors that regulate the amount of lead leached.

Electronics↗

Characterisation of municipal solid waste and its recyclable contents of Guangzhou.

Waste characteristics are essential data for waste disposal facilities planning and waste management policy formulation. However, waste composition studies are rarely carried out in mainland Chinese cities and even when it does, the methodologies used are not stringent. A year-long field survey on the physical components of waste and the recyclable in the waste stream has been conducted in Guangzhou to fill the information gap and to provide further experience for waste characterization study in mainland China. It was found that the ash content in the waste stream has decreased considerably. But the proportion of plastic materials in the waste stream has increased and is now comparable to its more urbanized cities. Although this lends support to the recent controls on expanded polystyrene food containers implemented by the Guangzhou environmental protection bureau, more detailed analysis shows that the focus should not only be on disposable food containers, but also on film plastic waste. Furthermore, the abundance of composite materials in the waste stream solicits attention from the waste management authority to step up the monitoring of their generation pattern and to consider imposing control measures.

China↗

Solid waste management in Macao: practices and challenges.

The rapid economic development and population growth in Macao have resulted in a large increase in refuse generated over the past decade. In 2003, the quantity of solid waste generated reached 249,255 tons, corresponding to 1.52 kg/day per capita. This figure has been gradually increasing. Domestic solid waste is the primary source of solid waste generation. The data showed that a considerable amount of the solid waste generated can be recycled and reutilized. Due to Macao's small geographic area and high cost of land, landfilling has the lowest priority for waste disposal. Solid waste incineration has been given a top priority over other waste disposal methods although it is much more expensive. In the last decade, more than 80% of the total waste in Macao was incinerated. However, the incineration capacity of the Macao Incineration Plant is going to reach its saturation earlier than expected. Waste minimization, the establishment of an effective waste collection and disposal fee system, and alternate ways dealing with the limited capacity of waste treatment facilities are regarded to be major challenges in the future.

Industrial Waste↗

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors.

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.

Attitude↗

An international perspective on hazardous waste practices.

In developing countries, public health attention is focused on urgent health problems such as infectious diseases, malnutrition, and infant mortality. As a country develops and gains economic resources, more attention is directed to health concerns related to hazardous chemical wastes. Even if a country has little industry of its own that generates hazardous wastes, the importation of hazardous wastes for recycling or disposal can present health hazards. It is difficult to compare the quantities of hazardous wastes produced in different countries because of differences in how hazardous wastes are defined. In most countries, landfilling is the most common means of hazardous waste disposal, although substantial quantities of hazardous wastes are incinerated in some countries. Hazardous wastes that escape into the environment most often impact the public through air and water contamination. An effective strategy for managing hazardous wastes should encourage waste minimization, recycling, and reuse over disposal. Developing countries are especially in need of low-cost technologies for managing hazardous wastes.

Air Pollution↗

Utilizing waste products from the food production and processing industries.

Waste in the food industry is characterized by a high ratio of product-specific waste. Not only does this mean that the generation of this waste is unavoidable, but also that the amount and kind of waste produced, which consists primarily of the organic residue of processed raw materials, can scarcely be altered if the quality of the finished product is to remain consistent. The utilization and disposal of product-specific waste is difficult, due to its inadequate biological stability, potentially pathogenic nature, high water content, potential for rapid autoxidation, and high level of enzymatic activity. The diverse types of waste generated by various branches of the food industry can be quantified based on each branches' respective level of production. Moreover; the origins of each type of waste and a tabulated overview of the traditional agricultural methods for reusing the waste are discussed. Additionally, alternative methods of waste management have emerged, which target the most important contents of the waste. In conclusion, new possibilities for the utilization of food industry waste are described.

Conservation of Natural Resources↗

Minimization and management of wastes from biomedical research.

Several committees were established by the National Association of Physicians for the Environment to investigate and report on various topics at the National Leadership Conference on Biomedical Research and the Environment held at the 1--2 November 1999 at the National Institutes of Health in Bethesda, Maryland. This is the report of the Committee on Minimization and Management of Wastes from Biomedical Research. Biomedical research facilities contribute a small fraction of the total amount of wastes generated in the United States, and the rate of generation appears to be decreasing. Significant reductions in generation of hazardous, radioactive, and mixed wastes have recently been reported, even at facilities with rapidly expanding research programs. Changes in the focus of research, improvements in laboratory techniques, and greater emphasis on waste minimization (volume and toxicity reduction) explain the declining trend in generation. The potential for uncontrolled releases of wastes from biomedical research facilities and adverse impacts on the general environment from these wastes appears to be low. Wastes are subject to numerous regulatory requirements and are contained and managed in a manner protective of the environment. Most biohazardous agents, chemicals, and radionuclides that find significant use in research are not likely to be persistent, bioaccumulative, or toxic if they are released. Today, the primary motivations for the ongoing efforts by facilities to improve minimization and management of wastes are regulatory compliance and avoidance of the high disposal costs and liabilities associated with generation of regulated wastes. The committee concluded that there was no evidence suggesting that the anticipated increases in biomedical research will significantly increase generation of hazardous wastes or have adverse impacts on the general environment. This conclusion assumes the positive, countervailing trends of enhanced pollution prevention efforts by facilities and reductions in waste generation resulting from improvements in research methods will continue.

Biomedical Technology↗