SEARCH · PubMed Health

Results for “Polyesters”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

PubMed1996

In vivo characterization of a fluoropassivated gelatin-impregnated polyester mesh for hernia repair.

The present study was undertaken to evaluate a new prototype mesh that consists of a knitted polyester structure treated with a fluoropolymer and impregnated with gelatin. The Fluoropassiv mesh, as well as two controls, the Surgipro polypropylene mesh and the Gore-Tex expanded polytetrafluoroethylene patch, were used for the repair of experimentally induced abdominal hernias in piglets and followed for scheduled implantation periods of 4, 15, and 60 days. At the sacrifice the mesh and surrounding tissue were excised for histological assessment of the healing sequence, for the identification of changes in hematologic and immunological characteristics, and for the measurement of the mechanical properties. After cleaning to remove the encroaching tissue, the explanted devices were monitored for biostability by infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The present study has demonstrated that the Fluoropassiv mesh provides adequate mechanical strength and compares favorably with the two controls. No exacerbated systemic or in situ hematologic or immunological reactions were observed with either the meshes of the patch material. Histological studies revealed that thick collagenous and vascularized tissue were well anchored to the three biomaterials as early as 15 days after implantation. The degree of tissue penetration differed depending on the device. Chemically, they proved stable over time.

Abdominal Muscles↗

PubMed1997

Development and characterization of an alginate-impregnated polyester vascular graft.

Alignate gels are known to be biocompatible, degradable, and nontoxic. In this study, sodium alginate was impregnated into a porous, knitted polyester graft (Microvel double velour graft) 6 mm in diameter. The alginate-impregnated graft was investigated in vitro and in vivo to evaluate its potential for use as a new vascular graft impervious to blood, while retaining high porosity for tissue ingrowth and biological healing. For in vitro investigation, the coating weight, water permeability, morphology, and mechanical properties of the alginate-impregnated grafts were compared to those of control or commercially available collagen-impregnated (Hemashield) grafts. The water permeability of the controls (1846 mL/min.cm2 at 120 mm Hg) was reduced > 99% by the alginate impregnation, rendering the graft impervious to blood. The coating weight of the alginate was 45 mg/g of graft, producing a much lower value than that of the collagen-impregnated model (310 mg/g). For in vivo investigation, the alginate-impregnated grafts were implanted in the aorta of mongrel dogs without preclotting for scheduled periods ranging from 4 h to 6 months. The control grafts after preclotting and the collagen-impregnated grafts without preclotting were also implanted for 3 and 6 months for comparison. Gross observation of the explanted grafts and histologic examination of the representative sections were conducted for three types of grafts using a light microscope after hematoxylin-eosin staining. No significant differences were observed between the histologic appearance of the alginate-impregnated grafts and that of the preclotted and collagen-impregnated grafts in terms of the degree of inflammation, foreign-body giant cell reaction, and intimal fibrosis. Endothelial-like cells were present on the midsections of all the grafts after 3 months of implantation. The resorption rate of alginate impregnated into the graft was also examined after staining the sections with periodic acid-Schiff reagent, Toluidine blue, and Alcian blue, which are specific for alginates. The staining alginate was partially visible between the graft fabrics up to 1 month after implantation, but was completely resorbed after 3 months. This preliminary study demonstrated that the use of an alginate as a biological sealant instead of proteins such as collagen, gelatin, and albumin may be a feasible approach to developing imprevious textile arterial prostheses, since the proteins have been reported to be generally unstable, hard to obtain in pure forms, not easy to crosslink and control resorption rate, and difficult to render compatible with standard storage and sterilization procedures.

Alginates↗

PubMed1999

Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids.

During the past decade, important advances have been made in the understanding of the hydrolytic degradation characteristics of aliphatic polyesters derived from lactic acid (LA) and glycolic acid (GA). Degradation of large poly(LAGA) (PLAGA) polymers is autocatalyzed by carboxyl end groups initially present or generated upon ester bond cleavage. Faster internal degradation and degradation-induced morphological and compositional changes are three of the most important findings deduced from the behaviors of various PLAGA polymers. This review presents the state of the art in this domain. The research efforts are focused on detailing the degradation mechanism and the effects of various factors on the degradation of PLAGA polymers. An attempt is also made to elaborate a scheme that can be used to predict degradation characteristics of these polymers from their initial composition and morphology.

Biocompatible Materials↗

PubMed2004

Comparison of different calibration methods for the determination by FT-NIR spectroscopy of the hydroxyl number in polyester resins.

Different calibration methods have been applied for the determination of the Hydroxyl Number in polyester resins, namely Partial Least Squares (PLS), Principal Component Regression (PCR), Ordinary Least Squares with selection of the variables by genetic algorithm (OLS-GEN) and back-propagation Artificial Neural Networks (BP-ANN). The predictive ability of the regression models was estimated by splitting the dataset in training and test sets by application of the Kohonen self-organising maps. The linear methods (OLS-GEN, PLS and PCR) showed comparable results while artificial neural networks provided the best results both in fitting and prediction.

Calibration↗

PubMed2001

Combinatorial array-based enzymatic polyester synthesis.

A combinatorial strategy for biocatalytic polymer synthesis is demonstrated. A library of polymers was synthesized in 96 deep-well plates using AA-BB polycondensations of acyl donors and acceptors. The library was based on four straight-chain diesters as acyl donors (C(3)-C(10)) with aliphatic/aromatic diols as well as more diverse structures including carbohydrates, nucleic acids, and a natural steroid diol used as acyl acceptors. The lipase from Candida antarctica was active in acetonitrile and was capable of catalyzing the polycondensation of the aforementioned monomers to polymers with M(w)'s reaching as high as 20,000 Da, including the preparation of novel sugar-containing polyesters. The combinatorial approach to biocatalytic polymer synthesis described herein serves as a foundation for polymeric materials discovery by demonstrating that polymer arrays can be produced from structurally complex monomers.

Catalysis↗

PubMed1988

Application of Neuhoff's optimized Coomassie brilliant blue G-250/ammonium sulfate/phosphoric acid protein staining to ultrathin polyacrylamide gels on polyester films.

An optimized Coomassie staining procedure, utilizing Coomassie Brilliant Blue G-250 in phosphoric acid/ammonium sulfate, was applied to ultrathin-layer isoelectric focusing in 0.18 mm polyacrylamide gels, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis in 0.38 mm polyacrylamide gels, both backed to Gel-Fix polyester supporting films. After isoelectric focusing staining of gelatin and acidic proteins was better with the phosphoric acid/ammonium sulfate procedure than with conventional organic solvent methods. When applied to gels after sodium dodecyl sulfate-polyacrylamide gel electrophoresis the sensitivity of the phosphoric acid/ammonium sulfate method was equal to that on conventional staining but lower than on silver staining.

Acrylic Resins↗

PubMed2005

An integrated microfluidic device in polyester for electrophoretic analysis of amino acids.

A precolumn reaction chamber was integrated into a polyester microfluidic device with a miniaturized detection system. The reaction chamber was designed to be a zigzag channel, 70 microm in width, 8 mm in length, followed by a wider straight channel, 150 microm in width, 2 mm in length. The detection system is composed of an embedded light-emitting diode (LED), an integrated optical fiber, and a photomultiplier tube (PMT). A success in amino acid analysis using the integrated microchemical analysis device proved that the precolumn reaction chamber was compatible with the integrated detection system. Three kinds of amino acids, arginine, glycine, and phenylalanine, mixed and reacted with 7-fluoro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-F) in the precolumn reaction chamber to produce fluorescent products, were separated by micellar eletrokinetic chromatography (MEKC) and detected by LED-excited fluorescence. The detection limits for arginine, glycine, and phenylalanine were 1, 1, and 0.5 mM, respectively, which can be improved by further optimizations of the reaction system and detection system.

4-Chloro-7-nitrobenzofurazan↗

PubMed2002

Biostability of electrically conductive polyester fabrics: an in vitro study.

The biostability of a series of polypyrrole (PPy)-coated polyester fabrics was investigated in an in vitro model. PPy-coated sample fabrics were incubated in saline at 37 degrees C for 1 and 2 weeks. After each period of incubation, the surface electrical resistivity of the sample fabrics was measured to monitor the changes caused by the incubation. Redoping was then performed by immersing the sample fabrics in a 1N HCl solution at room temperature for 30 min, which was followed by another measurement of the surface resistivity. The surface morphology of the sample fabrics was observed by scanning electron microscopy. The surface chemical composition of the fabrics and the oxidation of nitrogen in PPy were measured with X-ray photoelectron spectroscopy. The surface electrical resistivity of the PPy-coated fabrics was found to increase with the progress of incubation, which was mainly caused by dedoping and uptake of oxygen. This increase was nonlinear and accelerated with time. The surface resistivity of most of the samples was retained in the range of 10(3)-10(4) Omega/square after 1 week of incubation, which was considered suitable for short-term electrical stimulation applications. Physical deterioration represented by the cracking and delamination of the PPy coating was occasionally observed on the sample fabrics showing the most significant increase of resistivity. Further improvement of the stability of conductivity is highly desirable.

Chlorides↗

PubMed2002

Tissue response to microfibers of different polymers: polyester, polyethylene, polylactic acid, and polyurethane.

Tissue response to single polymer microfibers of polyester (PET), polyethylene (PE), poly(L-lactic acid) (PLA), and polyurethane (PU) was assessed using a rat subcutaneous model. Fibers of diameters ranging from 1 to 15 microm were aligned parallel to each other on polycarbonate frames and implanted in the subcutaneous dorsum in the subscapular region. After 5 weeks of implantation, fibrous capsule thickness was significantly less for fibers of diameters 1-5 than for those of 11-15 microm for all polymers tested. For PET and PU, 75.0 and 71.4% respectively of the 1-5 microm fibers had no capsule, while for PE and PLA only 45.5 and 56.3% respectively had no capsule. For 1-5 microm fibers, PE had significantly thicker capsules than PET and PU. Reducing fiber diameters from 6-10 to 1-5 microm induced a greater reduction in capsule thickness than changing polymers among PET, PE, and PLA. PU showed the least encapsulation of all polymers, demonstrating significantly thinner capsules than PET, PE, and PLA for 6-10 and 11-15 microm fibers.

Animals↗

PubMed1983

Polyester prostheses as substitutes in the thoracic aorta of dogs. I. Evaluation of commercial prostheses.

Using canine models, a representative selection of polyester or Dacron vascular prostheses, including woven, knitted, and velour types, were evaluated for their relative healing characteristics and for their structural changes during implantation. Following residence periods ranging from 4 h to 6 months at the site of the thoracic aorta, the dogs were sacraficed, and the grafts were excized for measurement of the thrombogenicity of the flow surface and for pathological examination by light microscopy and SEM. The kidneys were also removed and examined for infarcts caused by any trapped circulating emboli. The extent of healing, the presence of embolizing nuclei, and the thrombogenicity and morphology of the lumen surface were also assessed. The healing characteristics of each type of device proved similar. Velour fabrics exhibited more extensive encapsulation, but frequently their internal capsules failed to incorporate all the fibers. In all cases, cellular development on the lumen was limited to areas contiguous to the anastomoses. The initial porosity of the devices as measured by water permeability did not appear to influence the healing sequence to a significant extent. The grafts did exhibit differences in structural stability depending on whether they were of a knitted or woven construction. We suggest that users consider these different mechanical and structural properties when making their choice of a graft. Despite these differences, we believe that the healing process is far more host dependent than graft dependent.

Angiography↗

PubMed1994

Biodegradation evaluation of polyether and polyester-urethanes with oxidative and hydrolytic enzymes.

Enzyme-induced liberation of components from seven different radiolabeled polyurethanes was monitored by radiolabel counting of the incubation solutions and product isolation by high performance liquid chromatography (HPLC). The polyurethanes were selected to reflect variations in the hard-segment chemistry, soft-segment chemistry, and polyurethane hydrophilicity resulting from combinations of hydrophobic/hydrophilic soft segments. All materials were characterized using electron spectroscopy for chemical analysis, differential scanning calorimetry, size exclusion chromatography, and Fourier transform infrared spectroscopy. The material surfaces were examined both before and after incubation with enzyme and control solutions using scanning electron microscopy. Biodegradation assays were carried out at 37 degrees C using cholesterol esterase (CE) and horseradish peroxidase (HRP) under optimal pH conditions for each enzyme. The hydrolytic enzyme (CE) was effective in releasing degradation products that contained hard-segment components from some of the polyurethanes. HPLC analysis of products for a polyesterurethane synthesized with toluene diisocyanate (TDI) suggested that the bulk of the incorporated radiolabeled TDI was still covalently bonded within the cleaved chain segments of the original polymer and was not released as pure toluene diamine (TDA). The data suggest that urethane linkages in the soft-segment domains of phase separated polyetherurea-urethanes may be more prone to cleavage by CE than are the urea/urethane groups in the hard-segment domains. This could be related to the nature of the hard-segment domain structures. The oxidative enzyme (HRP) was not able to induce liberation of radiolabeled segments from either the polyether or polyester-based polyurethanes.

Biocompatible Materials↗

PubMed2003

The preparation of monodisperse biodegradable polyester nanoparticles with a controlled size.

In local drug delivery, nanoparticles based on biodegradable polymers can function as vehicles with controlled drug-release properties. To achieve a well-controlled drug-release profile, control over the particle size is of great importance. Therefore, biodegradable polyester nanoparticles were prepared by the salting-out method. Process variables were varied to study the effect on the particle size. The monodisperse particles obtained were between 100 and 400 nm in size and spherical in shape. It was found that the particle size could be adjusted by varying the preparation conditions upon which the polymer concentration had the most pronounced effect.

Chemistry, Pharmaceutical↗

PubMed2005

Effect of the covalent modification of horseradish peroxidase with poly(ethylene glycol) on the activity and stability upon encapsulation in polyester microspheres.

Encapsulation of proteins in polyester microspheres by coacervation methods frequently causes protein inactivation and aggregation. Furthermore, an often-substantial amount of the encapsulated proteins is released within the first 24 h from the microspheres. To overcome these problems poly(ethylene glycol) (PEG) was employed as excipient and protein-modifying agent. The model protein horseradish peroxidase (HRP) was chemically modified or co-lyophilized with PEG of differing molecular weights, namely PEG(5000), PEG(20000), and PEG(40000). The lyophilized preparations were encapsulated in poly(D,L-lactide-co-glycolic) acid (PLGA) microspheres by a coacervation method. Covalent modification of HRP with PEG increased the encapsulation efficiency (EE) from 83% to about 100% while PEG when used as an excipient reduced the EE. Encapsulation caused aggregation of ca. 5% of non-modified HRP and the residual specific activity was only 57%. Covalent modification with PEG reduced HRP aggregation to less than 1% and improved its residual activity to more than 95%. When PEG was used as excipient similar results were found with respect to a reduction in encapsulation-induced aggregation, but no more than 80% of residual activity was obtained even for the best formulation after encapsulation. It was also found that covalent modification of HRP with PEG substantially reduced the unwanted initial "burst" release observed during the initial 24 h of in vitro release from about 70% to 23%. Furthermore, HRP activity and stability were also improved during in vitro release for HRP-PEG conjugates. The data show that covalent modification of proteins with PEG might be useful to improve protein stability during coacervation encapsulation and subsequent release as well as to increase EE and reduce the burst release.

Chemistry, Pharmaceutical↗

PubMed2004

Biodegradable aliphatic polyester ionomers.

A series of polyester-based ionomers containing dimethyl 5-sulfoisophthalate sodium salt (DMSI) with up to 5 mol-% diacid units was synthesized by two-step polycondensation. Furthermore a polylactic acid (PLA) was modified by introducing poly(ethylene-co-methacrylic acid) ionomers with different ion groups, such as Na, Li, and Zn, using the melt blending method. This review examines the effect of the ionic group on the dynamic mechanical properties, melt rheology, crystallization behavior, degradation behavior, and biocompatibility with human dermal cells, as well as the nucleating effect of poly(ethylene-co-methacrylic acid) ionomer in PLA.

Biodegradation, Environmental↗

PubMed2004

Degradable polyesters through chain linking for packaging and biomedical applications.

The major route to convert lactic acid to high-molecular-weight polymers is ring-opening polymerization of lactide. We have investigated alternative synthesis routes based on oligomerization and chain linking to produce high-molecular-weight thermoplastic degradable polymers cost-effectively. Chain linking also offers new possibilities to prepare degradable polyesters for biomedical applications by extending the range of polymer properties achievable. In this paper, we briefly review different chain linking techniques used in our laboratory. Typically, lactic acid prepolymers with molecular weights of around 3,000-15,000 g x mol(-1) have been prepared by direct polycondensation. Hydroxyl terminated oligomers have been chain linked by using diisocyanate coupling agents, preferably 1,4-butane diisocyanate, forming poly(ester-urethanes). Poly(ester-amides) have been prepared by using 2,2'-bis(2-oxazoline) as coupling agent for carboxylic acid telechelic oligomers. Chain linking by end functionalization has been used in the preparation of poly(ester-anhydrides). In addition, a variety of crosslinked degradable polymers and copolymers have been synthesized through different crosslinking routes, by using methacrylic, itaconic or maleic double bonds or triethoxysilane moieties. A biodegradation test and ecotoxicological evaluation of the degradation products were carried out in addition to hydrolysis tests. Lactic acid based chain linked polymers were biodegradable and the degradation products were harmless. In hydrolysis tests, enzymatic degradation was pronounced in the chain linked poly(epsilon-caprolactone).

Biocompatible Materials↗

PubMed2004

Biodegradable polyesters reinforced with surface-modified vegetable fibers.

Flax fibers are investigated as reinforcing agents for biodegradable polyesters (Bionolle and poly(lactic acid) plasticized with 15 wt.-% of acetyltributyl citrate, p-PLLA). The composites are obtained either by high temperature compression molding fiber mats sandwiched between polymer films, or by batch mixing fibers with the molten polymer. Fibers in composites obtained by the latter method are much shorter (140-200 microm) than those of the mats (5,000 microm). Flax fibers are found to reinforce both p-PLLA and Bionolle (i.e. tensile modulus and strength increase) when composites based on fiber mats are investigated. Conversely, analogous composites obtained by batch mixing show poor mechanical properties. The observed behavior is attributed to the combined effect of fiber length and fiber-matrix adhesion. If flax fibers with a modified surface chemistry are used, the strength of short fiber composites is seen to improve significantly because the interface strengthens and load is more efficiently transferred. Appropriate surface modifications are performed by heterogeneous acylation reactions or by grafting poly(ethylene glycol) chains (PEG, molecular weight 350 and 750). The highest tensile strength of p-PLLA composites is reached when PEG-grafted flax fibers are used, whereas in the case of Bionolle the best performance is observed with acylated fibers.

Adipates↗

PubMed2004

Transformation of biodegradable polyesters into cyclic oligomers under continuous flow using an enzyme-packed column.

The enzymatic degradation of typical chemically synthesized biodegradable plastics, such as poly(butylene adipate) and poly(epsilon-caprolactone), to a repolymerizable cyclic oligomer under continuous flow using an enzyme column was studied, directed towards green chemical recycling. It was confirmed that both polymers were quantitatively transformed into the corresponding cyclic oligomers by passage through the column packed with immobilized lipase from Candida antarctica (Novozym 435) at 40 degrees C using a toluene solution. Compared to the batch treatment in a flask, a short reaction time and a low reaction temperature occurred for complete transformations of the polyesters by continuous flow through the enzyme column. The degradation activity of the enzyme column was maintained for at least six months at 40 degrees C. Conceptual scheme of the continuous degradation equipment using the enzyme column.

Biocompatible Materials↗

PubMed2006

Polyester scaffolds with bimodal pore size distribution for tissue engineering.

This paper presents a method for the preparation of porous poly(L-lactide)/poly[(L-lactide)-co-glycolide] scaffolds for tissue engineering. Scaffolds were prepared by a mold pressing-salt leaching technique from structured microparticles. The total porosity was in the range 70-85%. The pore size distribution was bimodal. Large pores, susceptible for osteoblasts growth and proliferation had the dimensions 50-400 microm. Small pores, dedicated to the diffusion of nutrients or/and metabolites of bone forming cells, as well as the products of hydrolysis of polyesters from the walls of the scaffold, had sizes in the range 2 nm-5 microm. The scaffolds had good mechanical strength (compressive modulus equal to 41 MPa and a strength of 1.64 MPa for 74% porosity). Scaffolds were tested in vitro with human osteoblast-like cells (MG-63). It was found that the viability of cells seeded within the scaffolds obtained using the mold pressing-salt leaching technique from structured microparticles was better when compared to cells cultured in scaffolds obtained by traditional methods. After 34 d of culture, cells within the tested scaffolds were organized in a tissue-like structure. Photos of section of macro- and mesoporous PLLA/PLGA scaffold containing 50 wt.-% of PLGA microspheres after 34 d of culture. Dark spots mark MG-63 cells, white areas belong to the scaffold. The specimen was stained with haematoxylin/eosin. Bar = 100 microm.

Biodegradation, Environmental↗