PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tooth Demineralization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

The effects of a sodium hypochlorite treatment on demineralized root dentin.

The effects of a 10% NaOCl treatment for 2 min on demineralized human root dentin were investigated by means of: microradiography (MR), scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and secondary ion mass spectroscopy (SIMS). MR measurements revealed that NaOCl caused a tissue contraction not related to water loss but to removal of organic substance(s), resulting in reductions of the lesion depth and mineral loss values by 15% and 42%, respectively. CLSM observations on wet dentin showed that the dentinal tubules underneath the surface are clearly observable and not deformed substantially by the NaOCl, except near the outermost surface. This indicates the importance of wet as well as of dried (high vacuum) observations. SEM micrographs (high vacuum) showed definite changes in the outer dentin surface structure; 85% of the originally open dentinal tubules were closed after NaOCl treatment. No marked changes were observed in the dentin ultrastructure inside lesions, as shown by SEM on fractured surfaces. SIMS data, pertaining to samples in high vacuum, showed a remarkable increase of chlorine (Cl) content in the entire lesion due to the NaOCl, indicating deep penetration of the original OC1 ions. The results suggest that the 2-min treatment of demineralized dentin by NaOCl solutions removes and/or changes part of the dentin matrix in nearly the whole lesion. As a consequence the mineral is somewhat redistributed, the outermost surface of a few mu m is changed, but the main dentin structure and element composition are still intact. These findings indicate that NaOCl treatments are of interest in remineralization and hyper-remineralization studies of dentin.

Adolescent↗

Remineralization of advanced root dentin lesions in vitro.

The possibility for remineralization of advanced root dentin lesions was investigated in vitro. Lesions were produced in acidic buffer solution with 0.1 and 0.5 ppm fluoride, for 3 and 5 weeks, respectively, using a single-section model. Next, the sections were immersed in a remineralization solution containing 0.1 ppm F (as NaF) for 20 weeks. Microradiographs were made after each 4-week-period. The lesions were around 500 micro m deep, with mineral loss values between 11,000 and 18000 vol%.microm. After 20 weeks of remineralization, the absolute amounts of deposited mineral ranged from 7500 to 10000 vol%. micro m, corresponding to a repair between 50 and 85%. Lesion depth was, on average, reduced by 199 micro m. This was not significantly different (at p < 0.05) between the four experimental groups. This study showed that remineralization of advanced dentinal lesions is possible in spite of the virtual absence of mineral in the lesion body after demineralization. The surface layer of the lesion was the preferred site for mineral deposition until mineral content values reached those of sound dentine. The mineral content in the lesion body increased with time, at a rate reflecting the initial severity of the lesion. We conclude that a remineralized surface layer does not inhibit transport of mineral ions to the body and that the remineralization in the lesion body reflected the number of sites for crystal growth.

Analysis of Variance↗

The role of fluoride mouthrinses in the control of dental caries: a brief review.

Fluoride mouthrinses have generally proved to be effective in controlling caries in clinical studies. Caries reductions in North American studies have averaged about 30%. Large-scale school-based mouthrinse programs conducted during the 1970s, however, used historical controls at a time when caries rates were now known to be declining. Post-hoc analysis of the absolute (not relative) caries reductions in these studies showed that school-based fluoride mouthrinse programs were of questionable benefit from a cost standpoint. Fluoride mouthrinses have been shown to reduce demineralization and enhance remineralization of enamel adjacent to orthodontic bands and brackets. Benefits in adults have been less well documented. Use of fluoride mouthrinses by young children is discouraged until they have mastery of their swallowing reflexes. This paper recommends the use of fluoride mouthrinses for patients at increased or high risk for dental caries, but cautions that school-based programs be undertaken only in communities with a high population caries rate.

Adult↗

Fluoride release and secondary caries inhibition by adhesive systems on root dentine.

This study tested the fluoride-release rate and the root caries inhibitory effect of dental adhesives. In phase 1, the fluoride released from samples (n = 5) of the adhesives A (Optibond Solo), B (One-up Bond F), C (Prime & Bond NT), D (Tenure Quick), and also of the controls [+] (glass-ionomer cement) and [-] (non-fluoride releasing adhesive), was quantified on a daily basis during a pH-cycling, caries-simulating phenomenon. In phase 2, restorations were made in bovine root dentine slabs (n = 16) with the same adhesives associated with a non-fluoridated composite. Control [+] restorations were made entirely with glass-ionomer cement. Specimens were thermocycled and submitted to the pH-cycling regimen. Demineralization areas and the presence of the wall lesion (WL) and the inhibition zone (IZ) were determined by polarizing light microscopy in dentine adjacent to the restoration. The highest concentration of fluoride was released by the control [+]; adhesives A, B and C, also released fluoride. No detectable amount of fluoride was released by D or [-]. Smaller areas of demineralization were found with control [+], whereas the demineralization areas of adhesives A-D and [-] did not differ from each other. No WL was detected, and higher percentages of IZ were recorded to [+] and to adhesive A. Although some dental adhesives were able to release fluoride, they could not inhibit secondary caries development as well as the glass-ionomer cement.

Animals↗

In situ models, physico-chemical aspects.

In situ (intra-oral) caries models are used for two purposes. First, they provide information about oral physiological processes. Such information helps to detail our knowledge of the oral ecosystem and to verify conclusions from in vitro experiments. Second, in situ models are utilized to test preventive agents in the phase between laboratory testing and clinical trials. Most investigations involving enamel inserts have been aimed at testing new dentifrices. The experimental designs of such studies usually do not allow one to draw conclusions on physico-chemical processes, e.g., because of single point measurements. Studies of model parameters (lesion type, lesion severity, and de/remineralization in time) constitute only a minority of the research reports. The most striking observation obtained with in situ models has been the significant differences in de/remineralization observed among individuals and, more importantly, within one individual during different time periods and between different sites in the same mouth (for review, see ten Cate et al., 1992). Regardless of this, some general findings can be inferred: During in situ demineralization, up to 62 vol% microns/day may be removed from enamel. For dentin specimens, this value may be as high as 89 vol% microns/day. For remineralization, during fluoride dentifrice treatment, a median deposition rate of 0.7%/day (for lesions with integrated mineral loss values between 2000 and 4000 vol% microns) is found. The rate of deposition seems to be correlated with the extent of the pre-formed lesion. This suggests that the number of sites (crystallite surface) available for calcium phosphate precipitation is an important parameter.(ABSTRACT TRUNCATED AT 250 WORDS)

Dental Caries↗

In vitro evaluation of secondary caries development in enamel and root dentin around luted metallic restoration.

Materials that release fluoride have been recommended for patients with high caries risk, but there is no conclusive evidence of their effect on fixed prostheses abutments. This study evaluated the influence of a resin-modified glass-ionomer cement on in vitro caries development in enamel and root dentin around metallic restoration. The cervical portion of 12 human third molars were sectioned in four blocks that were randomly divided into four Groups (n = 12; 1 block from each tooth/group): ZP (restoration + zinc phosphate cement), GI (restoration + resin-modified glass-ionomer cement), C1 (no restoration and no pH cycling), and C2 (no restoration and pH cycling). In ZP and GI, metallic restorations were luted at the crown-root junction. ZP, GI and C2 were submitted to a pH-cycling model. All blocks were sectioned, embedded and polished. Enamel and root dentin demineralization were evaluated through cross-sectional microhardness Knoop measures at 20 to 80 microns of depth (from the outer surface) and at 20 to 220 microns of distance from the cavity margins. Mineral loss values were calculated from Knoop hardness numbers. Data were analyzed by ANOVA, Tukey's test and regression analysis. Groups ZP, GI and C2 showed demineralization in relation to C1, which was more superficial in enamel than in root dentin. In root dentin, mineral loss in ZP and GI was smaller than in C2. Distance from the cavity margins was not significant. There was no difference between resin-modified glass-ionomer cement and zinc phosphate cement regarding artificial secondary caries development in both dental substrates.

Analysis of Variance↗

Experimental intra-oral caries models in fluoride research.

The use of experimental intra-oral caries models has increased in fluoride research. This paper focuses on the pre-clinical intra-oral models, the in situ and in vivo models, the various types, their benefits and disadvantages. Both preparation and sterilization of the hard tissue substrates can affect the substrates and therefore the results. Care needs to be taken that dentine samples are not exposed to drying and consequently shrinking during preparation and evaluation. Sterilization by gamma-radiation is at present the least tissue-damaging method. The most realistic experimental model is the in vivo model, followed by the in situ model using specimens with natural surfaces. The most accurate and direct evaluation technique for demineralization and remineralization studies is quantitative transversal microradiography, whereas confocal laser scanning microscopy (CLSM) is the most sensitive qualitative evaluation technique. Other evaluation techniques discussed are microhardness testing and the iodine permeability test. In light of the present skewed caries situation in western countries we suggest that fluoride research focuses on experimental caries models that can mimic severe cariogenic challenge. Testing of fluoride combinations and dosages that can prevent lesion development rather than promote remineralization would then be a practical consequence.

Animals↗

DIAGNOdent: an optical method for caries detection.

The onset of caries is characterized by demineralization of dental hard tissues. Optimal fluoridation with respective oral hygiene habits and diet may stop the progression of a lesion and even allow for its remineralization. The aim of modern dentistry must be a preventive approach rather than invasive repair of the disease. This is possible only with early detection and respective preventive measures. Some of today's diagnostic tools are not sensitive enough to detect this early onset of destruction. Tools based on fluorescence could have the possibility to overcome this problem. This overview will focus on today's knowledge of one possible tool, the DIAGNOdent.

Dental Caries↗

Fluorides in the new millennium.

Water fluoridation is known to be the most successful public health measure of the 20th century. More than half a century later, we are still reaping the benefits of fluoridation. We now know that the most important mechanism of fluoride action occurs through daily low-dose exposures. The battle between demineralization and remineralization occurs constantly, and fluoride shifts the balance to the latter. This dynamic, daily process far supersedes the pre-eruptive fluoride incorporation in importance. Fluoride, however, is now available in a variety of very different forms, useful in waging the war on caries. Nevertheless, opponents of this therapeutic agent maintain that its widespread use should be curtailed. Although the benefits of fluoride can no longer be disputed, fluoride supplementation must be supported and approached with consideration of total fluoride exposure.

Cariostatic Agents↗

Studies on fluoridated toothpicks.

The aim of this thesis was to evaluate the wooden toothpick as a vehicle for the delivery of fluoride to the approximal area. After two minutes use in vivo, the release of fluoride from the pointed section of a toothpick impregnated in 4% NaF was estimated to 0.15 mg. Toothpicks produced similar or somewhat higher fluoride concentrations in the approximal area compared with other fluoride-containing products, like dentifrice, mouthrinse solution and tablet. The mean fluoride concentration in an approximal area treated for two minutes with a toothpick impregnated in 4% NaF was around 11 mM/l. Toothpicks impregnated in 4% NaF, 8% SnF2 or 2% chlorhexidine had an effect on the proportion of mutans streptococci and on the decline of pH in dental plaque, but it was small and only of short duration. The recolonization of mutans streptococci was, however, slower after using the SnF2- and chlorhexidine-impregnated toothpicks than after using the NaF- and non-impregnated toothpicks. The effect of fluoridated toothpicks on the degree of de- and remineralization of enamel and dentine was measured using transversal microradiography in an in situ study. Four weeks' use of toothpicks, especially of NaF-impregnated toothpicks, reduced the degree of demineralization of enamel and dentine at approximal sites. Secondary ion mass spectrometry was also used to determine the fluoride content in the outer surface of dentine, which increased more than 10 times after using fluoride toothpicks compared with non-impregnated toothpicks. In a second in situ study, 4% NaF-, 2% chlorhexidine- and non-impregnated toothpicks had a similar effect on sound and demineralized enamel and on demineralized dentine. However, the NaF toothpicks were superior in terms of their effect on sound dentine. The effect on mutans streptococci and plaque-pH, on the other hand, was the same for all three types of toothpicks. The main conclusion from this thesis is that the wooden toothpick is a suitable vehicle for the delivery of fluoride to the approximal area.

Anti-Infective Agents, Local↗

An in vitro assessment and a pilot clinical study of electrical resistance of demineralized enamel.

Electrical resistance measurement was evaluated in vitro and in vivo as a method for comparing the remineralizing performance of toothpastes. In the in vitro study, areas of sound enamel on 12 unrestored, mature, extracted human molars and bicuspids, with electrical resistance readings greater than 99.99 M omega, were demineralized to an electrical resistance of 1 to 4 M omega. The teeth were divided into three groups. The change in electrical resistance was measured following a 15 cycle regimen of treatment, demineralization and salivary soaking. Treatments were five-minute exposures to either a 1:2 slurry in saliva of Enamelon (E), a remineralizing fluoride-toothpaste also containing soluble calcium and phosphate ions, a 1:2 slurry in saliva of Crest (C), a conventional fluoride toothpaste (P), or to saliva alone. Demineralization was performed with a 30-minute exposure to 0.1 M lactic acid 50% saturated with calcium hydroxyapatite. The salivary soaking was 1 hour in duration. The mean electrical resistance of the E, C and the saliva treated sites was 63.9 +/- 4.3, 37.6 +/- 9.5 and 2.1 +/- 0.7 M omega, respectively. The final resistance was statistically different for each group (p < 0.05). A pilot clinical study was then conducted to assess the electrical resistance technology in vivo. Eighteen adult subjects with at least one site of early enamel caries with an electrical resistance between 1.0 M omega and 20.00 M omega were randomly assigned to either Enamelon, Crest, or a non-fluoride placebo toothpaste and asked to brush twice daily. After three months, the mean resistance of the test sites was 23.57 M omega for E, 9.61 M omega for C and 13.24 M omega for P. However, the mean resistance changes did not proceed consistently over time. At the end of the study, the electrical resistance measurements on four sites out of twelve in Group E were suggestive of remineralization, whereas measurements on one site out of ten were suggestive of remineralization in Group C and two or three sites out of twelve were suggestive of remineralization in Group P. Progression of demineralization was possibly indicated in only one site, which was in Group C. There were insufficient subjects for statistical significance in the pilot clinical study. There were apparent problems with the variability of some measurements between visits in the in vivo study. Overall, however, the results of both studies indicate that with modifications to the equipment, electrical resistance measurements may be a means of comparing the remineralization performance of toothpastes.

Adult↗

Influence of the mineral content and morphological pattern of artificial root caries lesion on composite resin bond strength.

Dentine substrates with different mineral contents and morphological patterns were created by submitting root slabs to the following treatments: (A) immersion in artificial saliva during the experimental period (control), (B) demineralization for 32 h to induce caries lesion (demineralized group), and (C) demineralization for 32 h followed by remineralization for 8 d (remineralized group). The slabs were longitudinally sectioned, the mineral content was determined by cross-sectional microhardness, and the bond strength of an adhesive system/composite resin was assessed using a microtensile bond strength test. The dentine morphology after the treatments as well as the failure pattern of the debonded specimens was examined by scanning electron microscopy. Statistically significant differences were found in mineral content. Morphological analysis showed marked differences between the patterns of demineralized and remineralized substrates. The bond strength mean value of the control A did not differ from the group B, but was statistically higher than the group C. Since no linear relationship was found between dentine mineral content and bond strength values, it could be suggested that the morphological pattern may be more relevant than the mineral content to explain the bond strength of composite resin to dentine.

Analysis of Variance↗

Reliability of different techniques to assess marginal defects of Class II restorations in retrieved primary molars: a visual-tactile, SEM, dye penetration and polarized light microscopy study.

The aims of the present article were to assess the reliability of different techniques to assess marginal defects in Class II restorations in retrieved primary molars, and to determine the degree of agreement between the various assessment modalities. The material evaluated was comprised of 18 exfoliated primary molars that had been restored 20 to 22 months previously with a resin-modified glass ionomer (Vitremer--7 teeth), a hybridized composite resin (Z100 + Scotchbond Multipurpose--9 teeth), and amalgam (Dispersalloy--2 teeth). No significant differences could be observed between the groups. The majority of the restorations rated A at the buccal and lingual margins, but poor adaptation was disclosed at the cervical margin of the three types of restorations. SEM evaluation revealed that the highest percentage of defects was seen at the cervical margins with no statistically significant difference between the groups. No or minimal leakage was present at the occlusal margins and severe penetration of dye was seen at the cervical margins in all groups. Significantly less demineralization was seen adjacent to the Vitremer and Z100 restorations when compared to the Dispersalloy but no difference was found between the esthetic restorations. Except for the visual tactile examination, small marginal defects could be disclosed by the three assessment techniques (SEM, dye penetration, and polarized light microscopy). A good degree of agreement was observed between the three evaluation techniques.

Child↗

Combined effects of carbon dioxide laser and fluoride on demineralized primary enamel: an in vitro study.

This in vitro study aimed at evaluating the efficacy of a CO(2) laser (10.6 microm) alone or combined with acidulated phosphate fluoride (APF) on the inhibition of lesion progression in primary enamel. The specimens were treated with/without CO(2) laser and/or APF and submitted to pH cycling. Microhardness analysis was performed and the enamel mineral loss values were obtained. The groups treated with laser and/or APF presented lower mineral loss when compared to the control group (p < 0.05). Laser irradiation alone or combined with APF decreased lesion progression in primary enamel. However, the combined treatment did not show any significant additional effect.

Acidulated Phosphate Fluoride↗

Major topics in quantitative microradiography of enamel and dentin: R parameter, mineral distribution visualization, and hyper-remineralization.

Three aspects of quantitative transverse microradiography are described and discussed: (1) the average mineral loss parameter of enamel or dentin lesions (R) in vol%; (2) mineral distribution visualization of lesions by means of a computer-assisted videodensitometric (CAV) method; and (3) the microradiography of hyper-remineralized lesions. "R", defined as the average amount of mineral lost (or gained) in a lesion per unit lesion length, is a useful parameter in dental caries. The results show that, in vitro, R is about constant over the demineralization period for enamel and dentin. This was found even for quite different dissolution kinetics. R is strongly reduced by the presence of small amounts of fluoride in the demineralizing system. R of dentin lesions is smaller than for enamel lesions. We conclude that the mineral loss value (delta Z) and the lesion depth (ld) are in general dependent parameters during in vitro or in situ studies on enamel or dentin. During lesion formation, mineral loss from the lesion and acid penetration in the tissue are obviously linked. This is possible only if the mineral content in the lesion does not change very much after passage of the lesion front. The CAV method presented is illustrated for enamel lesions formed in vitro and in situ.

Absorptiometry, Photon↗

Changes in the cultivable flora in deep carious lesions following a stepwise excavation procedure.

This study examined the cultivable microflora before and after stepwise excavation procedures in deep carious lesions in 9 permanent teeth, categorized according to degrees of proximal surface destruction. The final excavation was performed 4-6 months after the initial treatment, which included peripheral dentine excavation and removal of the central cariogenic biomass and the superficial necrotic dentine. Dentine colour and consistency were assessed by means of standardized scales before the application of a Ca(OH)(2) compound and temporary sealing. Reassessments were performed before and after the final excavation. Microbiological samples of the central demineralized dentine were obtained with a sterile bur before and after the first excavation, as well as before and after the final excavation. After anaerobic cultivation on enriched non-selective tryptic soy agar, 30 colonies from a representative area were identified by standardized biochemical and physiological tests. Before temporary restoration, a yellowish and light brown demineralized soft dentine was typically observed, and gram-positive rods accounted for 70% and lactobacilli for 50% of the total colony-forming units. Lactobacillus casei subsp. rhamnosus and Actinomyces naeslundii dominated the lactobacilli and the other gram-positive rods, respectively. Gram-negative rods were the next most frequent isolates, followed by streptococci, each group accounting for about 20% of the colony-forming units in positive samples. Before the final excavation, which did not cause exposure of the pulp in any of the cases, the retained demineralized dentine had changed into a darker and harder tissue, and the total colony-forming units, as well as the frequency and proportions of lactobacilli were substantially reduced. Gram-negative rods also declined, and the flora was dominated by A. naeslundii and various streptococci. In conclusion, the cultivable flora detected following the treatment interval had declined substantially, and the distribution of bacterial species did not represent a typical cariogenic microbiota of deep lesions, confirming the clinical findings of arrested caries progression.

Actinomyces↗

Comparison of laser fluorescence and longitudinal microradiography for quantitative assessment of in vitro enamel caries.

A new quantitative, non-destructive method using laser-induced fluorescence (LAF) was compared with longitudinal microradiography (LMR) for assessment of mineral changes in enamel slices using an in vitro caries model. Ten enamel slices, cut longitudinally from sound natural smooth surfaces of human teeth, were exposed to de- and remineralization in a pH-cycling model. The enamel slices were subjected to LAF and LMR measurements before and at 2, 4, 7, and 9 days of demineralization. For LAF, the average fluorescence radiance decreased during the demineralization period with 11% by day 2 and 49% by day 9. For LMR, the corresponding average loss of mineral content changed with 0.01 and 0.10 kg.m-2 over the same time period. The mineral losses in each individual enamel slice measured with the two techniques were strongly correlated, r = 0.97. The Spearman rank correlation coefficient for all LAF and LMR demineralization results was 0.86. The precision (coefficient of variation) for LAF was 3.1%, corresponding to 0.005 kg.m-2, and the repeatability error for LMR was 0.02 kg.m-2, indicating a lower discrimination threshold for LAF compared to LMR. It was concluded that the new, sensitive, non-destructive LAF method provides possibilities for further improvement in the quantification of initial caries lesions in natural smooth enamel surfaces for use in in vitro studies. Furthermore, it offers potential in in situ caries studies as well as a tool in the diagnosis of early enamel caries in vivo.

Contrast Media↗

Detection of in vitro demineralization of primary teeth using quantitative light-induced fluorescence (QLF).

INTRODUCTION: With the advent of remineralizing therapies and the new, conservative approach to restoration placement, interest in detecting and monitoring subclinical, precavitated lesions has increased. The increased understanding of clinicians about the processes of primary and secondary prevention and the detection of lesions to which these therapies may be applied, is one of the current goals in caries management. Quantitative light-induced fluorescence (QLF) is a new method for the detection of very early caries. OBJECTIVES: To determine the ability of QLF to detect and longitudinally monitor in vitro enamel demineralization. To present the device to the paediatric community and present future in vivo uses of the device. DESIGN: An in vitro study with combined in vivo pilot. SAMPLE AND METHODS: Twelve previously extracted, caries free, primary molars were selected and prepared. Two teeth were randomly selected as controls. Teeth were prepared by gentle pumicing and coating in an acid-resistant nail-varnish, except for an exposed window on the buccal surface. QLF baseline images were taken and the teeth then exposed to a demineralizing solution. Teeth were removed at regular intervals (24, 48, 72, 96, 120, and 144 h), air-dried and QLF images taken. QLF images were analysed by a single, blinded examiner (to control, to length of exposure). Mineral loss, as measured by DeltaQ, was recorded. RESULTS: Demineralization was noted in all experimental teeth by 48 h, and within 24 h in six teeth. The QLF successfully monitored the increase in mineral loss over time (P < 0.05). The detected lesions were not visible clinically until 144 h and then in only the most severe lesions. No demineralization was detected by QLF in control teeth. The device was user- and patient-friendly in vivo, detecting subclinical lesions. CONCLUSION: Detection of very early mineral loss and subsequent monitoring of this loss is possible in primary teeth using QLF. The device is well suited to use in paediatric dentistry and offers applications for both clinicians and researchers. The determination of the status of carious lesions (active/inactive) will be possible with readings taken at recall appointments.

Analysis of Variance↗