SEARCH · PubMed Health

Results for “Alginates”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

PubMedDate not supplied

Control of molecular weight cut-off for immunoisolation by multilayering glycol chitosan-alginate polyion complex on alginate-based microcapsules.

Glycol chitosan is a positively charged polysaccharide which is water-soluble at pH 7.4, and is able to form a polyion complex (PIC) with anionic polymers, such as alginate. The authors attempt to develop a novel type of alginate-based microcapsule using this glycol chitosan for a islets-encapsulated bioartificial pancreas. The number of layers composed of glycol chitosan-alginate (GC-Alg) PIC were optimized, in order to cut off immunoglobulin transport and to protect encapsulated islets from the host immune reaction, and the transport characteristics were evaluated of glucose, bovine serum albumin (BSA) and gamma-globulin. To add mechanical stability to the microcapsule, calcium ions, which crosslinked the alginate polymers close to the interface between core Ca-alginate and multilayered membrane, were partially substituted with barium ions after the formation of multilayered Ca-alginate gel beads. The partition coefficients of BSA and gamma-globulin were decreased with the increasing number of layers. The immunoisolation was achieved against gamma-globulin with four layers of the GC-Alg PIC membrane, while BSA could permeate the membrane. The four-layered Ba-alginate gel bead had a good permeability for glucose, giving a diffusion coefficient corresponding to 80% of that in pure water. Insulin secretion from the islets in the four-layered Ba-alginate microcapsule was satisfactorily observed with the fractional stimulation ratio of 2.17. This result indicates that the encapsulated islets maintained their viability even after encapsulation. It was, thus, shown that the Ba-alginate microcapsule with four layers of the GC-Alg PIC membrane is promising as the microencapsulation material for a bioartificial pancreas.

Alginates↗

PubMed1999

Transplantation of alginate microcapsules: generation of antibodies against alginates and encapsulated porcine islet-like cell clusters.

BACKGROUND: Microencapsulation of islets of Langherhans in alginate poly-L-lysine capsules provides an effective protection against cell-mediated immune destruction, and ideally should allow the transplantation of islets in the absence of immunosuppression. It has previously been suggested that alginate rich in mannuronic acid (high M) is more immunogenic than alginate rich in guluronic acid (high G). The ability of these alginates to induce an antibody response in the recipient or act as an adjuvant to antibody responses against antigens leaked from the capsule was investigated in the present study. METHODS: Empty capsules made from these different types of alginate were transplanted intraperitoneally to Wistar rats or Balb/c mice. In addition, some animals were also injected with bovine serum albumin to assess the ability of the alginates to act as an adjuvant to this antigen. Antibody responses to intraperitoneally transplanted free and microencapsulated fetal porcine islet like cell clusters (ICC) were also evaluated, in animals treated with or without cyclosporine. RESULTS: Antibodies against high M-alginate capsules were detected in the sera of mice transplanted with this capsule type. However, this response was not seen after the transplantation of high G capsules. When Wistar rats were used as recipients, no antibody responses were detected against any type of alginate capsules. Neither type of capsule acted as an adjuvant. Antibodies against ICC were present, in rats transplanted with both nonencapsulated and encapsulated ICCs. Administration of cyclosporine could abolish this production of antibodies against ICC. CONCLUSIONS: High G-alginate capsules are less immunogenic than high M capsules. Because encapsulation did not protect against the generation of antibodies against ICC, it can be assumed that antigen leakage from the capsules occurs, as no evidence was found for capsules breaking in vivo.

Adjuvants, Immunologic↗

PubMed2005

Role of an alginate lyase for alginate transport in mucoid Pseudomonas aeruginosa.

The opportunistic pathogen Pseudomonas aeruginosa secretes a capsule-like polysaccharide called alginate that is important for evasion of host defenses, especially during chronic pulmonary disease of patients with cystic fibrosis (CF). Most proteins for alginate biosynthesis are encoded by the 12-gene algD operon. Interestingly, this operon also encodes AlgL, a lyase that degrades alginate. Mutants lacking AlgG, AlgK, or AlgX, also encoded by the operon, synthesize alginate polymers that are digested by the coregulated protein AlgL. We examined the phenotype of an DeltaalgL mutation in the highly mucoid CF isolate FRD1. Generating a true DeltaalgL mutant was possible only when the algD operon was under the control of a LacI(q)-repressed trc promoter. Upon induction of alginate production with isopropyl-beta-D-thiogalactopyranoside, the DeltaalgL mutant cells were lysed within a few hours. Electron micrographs of the DeltaalgL mutant showed that alginate polymers accumulated in the periplasm, which ultimately burst the bacterial cell wall. The requirement of AlgL in an alginate-overproducing strain led to a new model for alginate secretion in which a multiprotein secretion complex (or scaffold, that includes AlgG, AlgK, AlgX, and AlgL) guides new polymers through the periplasm for secretion across the outer membrane. In this model, AlgL is bifunctional with a structural role in the scaffold and a role in degrading free alginate polymers in the periplasm.

Alginates↗

PubMed1996

Alginate synthesis in Pseudomonas aeruginosa: the role of AlgL (alginate lyase) and AlgX.

Previous studies localized an alginate lyase gene (algL) within the alginate biosynthetic gene cluster at 34 min on the Pseudomonas aeruginosa chromosome. Insertion of a Tn501 polar transposon in a gene (algX) directly upstream of algL in mucoid P. aeruginosa FRD1 inactivated expression of algX, algL, and other downstream genes, including algA. This strain is phenotypically nonmucoid; however, alginate production could be restored by complementation in trans with a plasmid carrying all of the genes inactivated by the insertion, including algL and algX. Alginate production was also recovered when a merodiploid that generated a complete alginate gene cluster on the chromosome was constructed. However, alginate production by merodiploids formed in the algX::Tn501 mutant using an alginate cluster with an algL deletion was not restored to wild-type levels unless algL was provided on a plasmid in trans. In addition, complementation studies of Tn501 mutants using plasmids containing specific deletions in either algL or algX revealed that both genes were required to restore the mucoid phenotype. Escherichia coli strains which expressed algX produced a unique protein of approximately 53 kDa, consistent with the gene product predicted from the DNA sequencing data. These studies demonstrate that AlgX, whose biochemical function remains to be defined, and AlgL, which has alginate lyase activity, are both involved in alginate production by P. aeruginosa.

Alginates↗

PubMed1999

Self-setting barrier membrane for guided tissue regeneration method: initial evaluation of alginate membrane made with sodium alginate and calcium chloride aqueous solutions.

Alginate membrane was proposed as a self-setting barrier membrane that can be used for guided tissue regeneration (GTR). The alginate membrane can be prepared and placed at the bone defect during the surgical procedure. The procedure consists of two simple steps. First, the bone defect is filled with sodium alginate (Na-Alg) aqueous solution. Then calcium chloride aqueous solution is dropped on the surface of the Na-Alg aqueous solution. An alginate membrane is formed on the bone defect, keeping the inside of the bone defect filled with unreacted Na-Alg aqueous solution. In this investigation, a preliminary animal study was conducted for an initial evaluation as to whether or not the alginate membrane can be used as a barrier membrane for the GTR method. Bone defects were made in the tibiae of 15-week-old rats. The alginate membrane was made on the surface of existing bone by filling the defect with Na-Alg aqueous solution and then dropping calcium chloride aqueous solution onto the surface of the Na-Alg solution. Four weeks after surgery, the bone defect was found to be reconstructed with new bone when the defect had been covered with alginate membrane whereas the bone defect was filled only with connective tissue when it had been kept open. We concluded, therefore, that this alginate membrane may be a useful barrier membrane when the GTR method is employed.

Alginates↗

PubMed1998

Culture of chondrocytes in alginate gel: variations in conditions of gelation influence the structure of the alginate gel, and the arrangement and morphology of proliferating chondrocytes.

Sodium alginate, which gels in the presence of calcium ions, is commonly used for culture of anchorage-independent cells, such as chondrocytes. Normally, the gel appears microscopically homogeneous but, depending on the conditions of gelation, it may contain a varying number of small channels that extend inward from the surface. We have examined the influence of these channels on the morphology of cultured chondrocytes entrapped in alginate beads. Growth-plate or articular chondrocytes cultured in alginate normally proliferate and form rounded cell clusters but, in alginate beads containing numerous channels, many chondrocytes become aligned and form columns similar to those in the growth plate in vivo. As the pattern of cellular growth and morphology in alginate is profoundly influenced by the presence of channels in the gel, further studies were conducted to determine what specific conditions of gelation affect their formation. The channels are especially numerous when both the alginate and the gelling solutions lack sodium ions or other monovalent cations. The channels are cavities in the gel formed by particulate blocking of the rapid diffusion of calcium ions from the gelling solution into the boundary of the calcium alginate solution, and hence they extend inward from cells at the surface of the alginate gel. An understanding of the conditions under which these channels develop makes it possible either to avoid their formation or, alternatively, to enhance the number of channels in order to encourage proliferating cells to grow in radial columns, rather than in a less organized pattern characteristic of most culture systems.

Alginates↗

PubMed1998

Microcapsules of alginate-chitosan--I. A quantitative study of the interaction between alginate and chitosan.

The binding of chitosan to alginate beads was studied quantitatively by using radioactive labelled fractions of chitosan. The alginate-chitosan capsules were made either by dropping a solution of sodium alginate into a solution containing chitosan or by incubating calcium alginate beads in a solution of chitosan. The first procedure yielded a binding of 0.015 microg chitosan per mm2 of capsule surface, while the latter procedure yielded over 2 microg mm(-2). The maximum obtained weight ratio of chitosan to alginate in a microcapsule after 24 h was 0.40. The binding of chitosan was markedly increased by reducing the number average molecular weight of chitosan below 20000 Da and by increasing the porosity of the alginate gel. The porosity was increased by producing homogeneous gels, and by adding calcium chloride to the chitosan solution during the membrane forming stage. The effect of calcium ions on the porosity of the gel was studied by experiments involving release of blue dextran from calcium alginate beads. The binding of chitosan was also found to increase with decreasing fraction of N-acetylations, FA, on chitosan in the range of FA = 0.3 to FA = 0, and with increasing pH in the range from pH 4 to 6. Capsules with a diameter of 500 microm had a higher weight ratio of chitosan to alginate after 24 h of binding than the capsules with the larger diameter of 1500 microm.

Acetylation↗

PubMed1999

Compressive and shear properties of alginate gel: effects of sodium ions and alginate concentration.

The equilibrium and viscoelastic properties of alginate gel crosslinked with Ca2+ were determined as a function of alginate concentration and duration of exposure to physiologic concentrations of NaCl. Compressive and shear stress relaxation tests and oscillatory shear tests were performed to measure the material properties at two time periods after storage in NaCl compared to no NaCl exposure. The effect of concentration was determined by testing 1-3% alginate gel in a bath of physiological NaCl and CaCl2. After 15 h of exposure to NaCl, the compressive, equilibrium shear, and dynamic shear moduli decreased by 63, 84, and 90% of control values, respectively. The material properties exhibited no further changes after 7 days of exposure to NaCl. The loss angle and amplitude of the relaxation function in the shear also decreased, indicating less viscous behaviors in both dynamic and transient configurations. All moduli, but not the loss angle, significantly increased with increasing alginate concentration. The observed decrease in compressive and shear stiffness for alginate gel after exposure to Na+ was significant and indicated that physiological conditions will soften the gel over a time period of up to 7 days after gelation. The alginate gel retains significant solid-like behaviors, however, as measured by a loss angle of approximately 3 degrees. This study provides the first available data for material properties of alginate gel tested in physiological saline.

Alginates↗

PubMed2003

Polymer relationships during preparation of chitosan-alginate and poly-l-lysine-alginate nanospheres.

The preparation of chitosan-alginate nanospheres is described and their properties compared to the poly-L-lysine-alginate system. The mass ratio range of sodium alginate:CaCl(2):cationic polymer (poly-L-lysine [PLL] or chitosan) to prepare nanospheres was 100:17:10. This mass ratio ensured that the calcium alginate was maintained in the pre-gel phase and sufficient cationic polymer was present to form nanospheres. At low cationic polymer concentrations, nanospheres were not formed, whereas microspheres were formed at higher concentrations. The release of entrapped methylene blue from the nanospheres was directly proportional (R(2)=0.98) to the sodium chloride concentration in the dissolution medium. The sodium ions more efficiently displace PLL compared to chitosan; hence, the mass of drug released from the chitosan-alginate nanospheres is slow for equivalent sodium ion concentration. Isothermal titration calorimetry studies determined that the primary binding affinity between calcium and alginate was 1.33 x 10(6)/mole and entropically driven, whereas, the second binding affinity was weaker (1.03 x 10(4)/mole) and driven by both enthalpy and entropy. This binding was competitively inhibited by sodium ions. Similarly, the binding of PLL to calcium alginate pre-gel was electrostatic and competitively inhibited by sodium, although, the thermodynamic parameters for this interaction could not be determined.

Alginates↗

PubMed2002

Alginate production by Azotobacter vinelandii mutants altered in poly-beta-hydroxybutyrate and alginate biosynthesis.

Mutant AT268 of Azotobacter vinelandii - showing diminished production of poly-beta-hydroxybutyrate (PHB) due to a mutation in phbR (the gene coding for the transcriptional activator of the phbBAC biosynthetic operon); mutant CNT26, containing a mutation (muc26) that increases the transcription of gene algD (encoding GDP mannose dehydrogenase, the key enzyme in alginate biosynthesis); and mutant DM, carrying both phbR and muc26 mutations - were characterised in terms of alginate production, broth viscosity, and molecular weight of the alginate. All the mutants evaluated produced 25% less alginate with respect to that produced by the wild type. Unexpectedly and with no apparent relation to the phbR and muc26 mutations, mutant DM exhibited the highest molecular weight ever reported for a bacterial alginate (up to 4 x 10(6) Da), with a very low polydispersity index (1.3). Acetyl content in the alginate produced by this strain was low (1.4-2.6%). These characteristics make this mutant a very valuable source for producing alginates with improved properties.

Alginates↗

PubMedDate not supplied

Alginate-polylysine-alginate microcapsules: effect of size reduction on capsule properties.

Alginate-polylysine-alginate capsules containing insulin-producing cells have been used as a bio-artificial pancreas in the treatment of diabetes mellitus. In a search for microcapsules with improved diffusion characteristics, a high voltage system was developed that produces 250,000 beads/min with a diameter of 160 microm +/- 3-5%. The diameter of the beads could be varied between 160-700 microm depending on the needle diameter and construction, the voltage, the distance between the electrodes and the flow of alginate solution. Ca-alginate beads with diameters of 200 and 500 microm were produced by the high voltage electrostatic system. The 200 microm beads were sensitive to poly-L-lysine (PLL) exposure and had to be washed in ion-free solution to avoid collapse. The 200 microm beads swelled more than the 500 microm beads in the washing and PLL treatment. Also, the porosity of the capsules changed with size, but capsules impermeable to tumour necrosis factor (TNF) could be made by exchanging PLL with poly-D-lysine (PDL) for the 500 microm beads. The 200 microm beads were impermeable to IgG after PLL exposure. Islets of Langerhans were encapsulated in alginate-PLL-alginate capsules and evaluated by measuring protruding islets and insulin production. Islets in microcapsules made by the high voltage electrostatic system did not function differently from islets in larger microcapsules made by an air jet system. In conclusion, alginate capsules made by a high voltage electrostatic system enable large-scale production of small capsules with a narrow size distribution that can meet the functional properties of larger capsules by small changes in the encapsulation procedure.

Alginates↗

PubMed2005

Role of the Pseudomonas fluorescens alginate lyase (AlgL) in clearing the periplasm of alginates not exported to the extracellular environment.

Alginate is an industrially widely used polysaccharide produced by brown seaweeds and as an exopolysaccharide by bacteria belonging to the genera Pseudomonas and Azotobacter. The polymer is composed of the two sugar monomers mannuronic acid and guluronic acid (G), and in all these bacteria the genes encoding 12 of the proteins essential for synthesis of the polymer are clustered in the genome. Interestingly, 1 of the 12 proteins is an alginate lyase (AlgL), which is able to degrade the polymer down to short oligouronides. The reason why this lyase is associated with the biosynthetic complex is not clear, but in this paper we show that the complete lack of AlgL activity in Pseudomonas fluorescens in the presence of high levels of alginate synthesis is toxic to the cells. This toxicity increased with the level of alginate synthesis. Furthermore, alginate synthesis became reduced in the absence of AlgL, and the polymers contained much less G residues than in the wild-type polymer. To explain these results and other data previously reported in the literature, we propose that the main biological function of AlgL is to degrade alginates that fail to become exported out of the cell and thereby become stranded in the periplasmic space. At high levels of alginate synthesis in the absence of AlgL, such stranded polymers may accumulate in the periplasm to such an extent that the integrity of the cell is lost, leading to the observed toxic effects.

Alginates↗

PubMed1998

The effects of alginate and non-alginate wound dressings on blood coagulation and platelet activation.

Alginates are used as haemostats in wound dressings. They act as calcium ion (Ca) donors as they contain mannuronic (M) or guluronic (G) groups with a high Ca content. This study compared the effects of calcium and zinc containing alginates and non-alginate dressings on blood coagulation and platelet activation to determine which was the best haemostat. We showed that alginate materials activated coagulation more than non-alginate materials. The extent of coagulation activation was affected differently by the alginate M or G group composition. It was demonstrated that alginates containing zinc ions had the greatest potentiating effect on prothrombotic coagulation and platelet activation.

Alginates↗

PubMed1997

Studies on diffusion in alginate gels. II. Effect of acid and subsequent re-exposure to calcium on the diffusion of caffeine and theophylline in alginate gel films.

The aim of this research was to investigate the effect of acid exposure and calcium re-exposure on the diffusion of caffeine and theophylline through calcium alginate gel films. Diffusion was measured using side-by-side glass cells, before and after the films were exposed to simulated gastric fluid (SGF) USP minus pepsin. The permeability increased by about 15-fold for theophylline and 48-fold for caffeine after 5 min SGF exposure. There was no significant further increase by prolonging the exposure time to 4 hr. The diffusion of both drugs was less than through alginate gel films that were not cross-linked with calcium but were gelled in SGF. Treatment of the calcium alginate gel films with SGF depleted the films of all of their calcium content. Calcium alginate gel films that were exposed to SGF for a constant period of 15 min, were re-exposed to 0.34 M calcium chloride solution for periods up to 24 hr. The calcium content returned to 80% of the level in the original calcium alginate films and diffusion was reduced, but not to the level that was observed in the original calcium alginate films. It was concluded that the effect of SGF on calcium alginate was very rapid and that the increase in drug diffusion observed was probably due to removal of calcium from the gel. It was also concluded that the original diffusion properties and calcium content could only be partially regenerated by re-exposing the acid-exposed films to calcium chloride.

Administration, Oral↗

PubMed1999

In vitro release modulation from crosslinked pellets for site-specific drug delivery to the gastrointestinal tract. II. Physicochemical characterization of calcium-alginate, calcium-pectinate and calcium-alginate-pectinate pellets.

Pellets of calcium-alginate, calcium-pectinate and calcium-alginate-pectinate were produced via crosslinking in an aqueous medium for site-specific drug delivery in the gastrointestinal tract. A comparative study of their physicochemical characteristics by means of texture analysis, modulated temperature differential scanning calorimetry (MTDSC), scanning electron microscopy and swelling dynamics under different pH conditions was undertaken. It was found that the incorporation of low methoxylated pectin (i.e., degree of methoxylation approximately 35%) together with alginate appears to influence the degree of crosslinking and subsequently the physical, mechanical and resilience behavior. In general, texture analysis of various pellets indicated that both strength and resilience profiles were in the order of calcium-alginate>/=calcium-alginate-pectinate>calcium-pectinate. Calcium-alginate pellets were found to be viscoelastic, while calcium-pectinate was highly brittle. Through the application of MTDSC, depolymerization transitions, reversing and non-reversing heat flow were determined and interpreted for each formulation. Scanning electron microscopy and micro-thermal analysis revealed distinct morphological differences in each case. The influence of and nature of crosslinking, and textural properties of such pellets on drug release rate modulation is discussed.

Administration, Oral↗

PubMedDate not supplied

Release characteristics of chitosan treated alginate beads: II. Sustained release of a low molecular drug from chitosan treated alginate beads.

The aim of this paper was to investigate the possible applicability of chitosan treated alginate beads as a controlled release system of small molecular drugs with high solubility. Timolol maleate (mw 432.49) was used as a model drug. The beads were prepared by the ionotropic gelation method and the effect of various factors (alginate, chitosan, drug and calcium chloride concentrations, the volume of external and internal phases and drying methods) on bead properties were also investigated. Spherical beads with 0.78-1.16 mm diameter range and 10.8-66.5% encapsulation efficiencies were produced. Higher encapsulation efficiencies and retarded drug release were obtained with chitosan treated alginate beads. Among the different factors investigated such as alginate, drug, chitosan and CaCl2 concentrations, the volumes of the external and internal phases affected bead properties. The drying technique has an importance on the bead properties also. The release data was kinetically evaluated. It appeared that chitosan treated alginate beads may be used for a potential controlled release system of small molecular drugs with high solubility, instead of alginate beads.

Alginates↗

PubMed1993

Sequence of a gene encoding a (poly ManA) alginate lyase active on Pseudomonas aeruginosa alginate.

The recombinant plasmid pAL-A3 bears a (poly ManA) alginate lyase-encoding gene that originates from the marine bacterium ATCC 433367 (Brown et al., Appl. Environ. Microbiol. (1991) 57, 1870-1872). The alginate lyase produced by Escherichia coli TC4 harbouring pAL-A3 was purified to protein homogeneity and the corresponding gene sequenced, giving access to the first known primary structure of an alginate lyase. The 265-amino acid residue alginate lyase showed lytic activity on a Pseudomonas aeruginosa alginate isolated from a cystic fibrosis patient. Unexpectedly, the alginate lyase thus characterized differed from that isolated from the culture medium of the bacterium ATCC 433367 (Romeo and Preston, Biochemistry (1986) 25, 8385-8391).

Alginates↗

PubMed1996

Effect of nutrients on alginate synthesis in Azotobacter vinelandii and characterization of the produced alginate.

The role of nutrients on alginate production by Azotobacter vinelandii was studied in batch cultures. The largest amount of bacterial alginate was obtained in presence of: 0.3 g/l MgSO4.7H2O. 0.4 g/l NaCl, 42 mg/l CaCl2.2H2O,.4 mg/l KH2PO4, 16 mg/l K2HPO4, 2.5 mg/l FeSO4.7H2O, 2.9 mg/l H3BO3, 2 mg/l ZnSO4.7H2O, 2 mg/l Na2MoO4.2H2O, 0.3 mg/l CuSO4.5H2O, 0.2 mg/l MnCl2.4H2O. Alginate production was not enhanced by natural additives or inducing agents, except for acetate, which increased alginate yield. The pure alginate contained 0.36% ash and 0.4% protein. It is similar to algal alginate, but it has an extra acetyl group. It contains 69.5% M-M block, 27.5% M-G block and 3% G-G block.

Alginates↗