PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “DENTAL RESTORATION, PERMANENT”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed2003

Effect of eugenol and non-eugenol containing temporary cement on permanent cement retention and microhardness of cured composite resin.

This present study had three aims: 1) to evaluate the bond strengths of carboxylate and resin cements in cementing cast Co-Cr crowns to pretreatment of composite resin cores with eugenol and non-eugenol containing temporary cements, 2) to determine the microhardness of composite resin treated with temporary cement, 3) to view the surface differences of composite resin with SEM. The composite cores were divided into three experimental groups for the following pretreatments: Group 1, No treatment was provided, Group 2, The external walls of the composite cores were covered with eugenol-containing temporary cement, Group 3, The external walls of the composite cores were covered with non-eugenol containing temporary cement. Analysis of variance results showed that there was a significant difference between all three groups. Temporary cement with eugenol was significantly reduced the bond strength of full crown casting with resin cement compared with non-eugenol. The resin specimens treated with the eugenol-containing temporary cement showed the lowest microhardness values, the non-eugenol-containing temporary cement was not significantly different from those of the control groups.

Analysis of Variance↗
PubMed2026

Influence of endodontic access on the fracture resistance, retention and microleakage of full-coverage restorations in vitro: A systematic review and meta-analysis.

BACKGROUND: Endodontic access through retained full-coverage restorations (FCRs) is a preferred option for patients because of its high cost-effectiveness. However, the clinical performance of FCRs after repaired access cavity remains insufficiently characterized. This systematic review investigates the effects of endodontic access cavity preparation through retained FCRs on fracture resistance, retention, and microleakage based on in vitro studies. METHODS: A comprehensive search was performed in PubMed, Web of Science, and Scopus databases. Studies investigating the influence of endodontic access on the fracture resistance, retention, and microleakage of FCRs were included. Two independent reviewers conducted study selection, data extraction, and risk-of-bias assessment using the QUIN tool. Meta-analysis was employed to estimate fracture resistance and retention, with sensitivity analysis and subgroup evaluation also performed. Microleakage was summarized qualitatively. RESULTS: Twentythree studies were included: fracture resistance (n = 15), retention (n = 5), and microleakage (n = 3). Endodontic access significantly reduced fracture resistance for zirconia (p = 0.0002) and lithium disilicate (LD) restorations (p = 0.007), but not for resin-matrix ceramic (RMC) restorations (p = 0.25). Abutment tooth type contributed to heterogeneity within the LD and RMC subgroups. Retention was significantly reduced when access cavities were left unrepaired (p = 0.03), whereas appropriate repair protocols restored or enhanced retention relative to baseline. Accelerated aging increased microleakage in retained FCRs. Surface pretreatments and flowable resin liners tended to reduce microleakage, but findings were inconsistent. CONCLUSIONS: Endodontic access significantly reduces fracture resistance of zirconia and LD FCRs, whereas RMC restorations show no significant change. Appropriate repair protocols can restore or improve retention, potentially exceeding original values. Limited evidence suggests that effective sealing is achievable with appropriate materials. However, well-designed and in-vivo researches are needed to provide more detailed clinical guidance. CLINICAL SIGNIFICANCE: When performing endodontic access through retained FCRs, reduced fracture resistance must be carefully considered for zirconia and LD restorations, while RMC restorations may be exempt from this concern. Loss of retention with access can be restored after repair. Surface pretreatment and flowable resin liners help decrease microleakage.

Humans↗
PubMed2026

Clinical outcomes of zirconia dental restorations: A systematic review and meta-analysis.

OBJECTIVES: To evaluate the survival and success rates of zirconia dental restorations (ZDRs) and their complications. DATA & SOURCES: Electronic searches of PubMed, Cochrane, Embase and Web of Science were conducted up to January 1, 2026. Clinical studies with at least 1-year follow-up evaluating zirconia dental restorations in natural teeth were included. Survival rates, success rates, and biological and mechanical complications were analyzed. Risk of bias was assessed using RoB 2, Newcastle-Ottawa Scale (NOS), and Joanna Briggs Institute tools (JBI). Certainty of evidence was evaluated using the GRADE approach. STUDY SELECTION & RESULTS: Sixty-six studies published between 2008 and 2025 were included. Pooled survival rates ranged from 92.9% to 98.7% up to 10 years for single crowns (SCs), 77.6% over 10 to 13 years for fixed dental prostheses (FPDs), 97.4% for resin-bonded FPDs (RBFPDs) over 10 to 15 years, from 50.0% to 52.6% over 9 to 13 years for conventional cantilever FPDs (CFPDs) and 89.0% for inlay-retained FPDs (IRFPDs) over 10 years. Pooled success rates were 46.1% for SCs over 10 years, 40.1% for FDPs over 10 to 13 years, 84.3% for RBDPDs over 10 to 15 years, 12.5% to 22.6% for CFPDs over 9 to 13 years and 70.3% for IRFPDs over 10 years. Biological and mechanical complication rates were 12.1% and 53.9% for SCs at 10 years, 19.4% and 46.7% for FPDs over 10 to 13 years, 50.0% and 37.5% for CFPDs at 9 years, 21.4% and 14.3% for IRFPDs at 3 years, and 3.3% and 8.0% for RBFPDs over 10 to 15 years. Restorations treated with airborne-particle abrasion (APA) combined with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) achieved favorable short-term clinical outcomes, with pooled survival and success rates of 98.6% and 97.7% for SCs, and 98.1% and 70.1% for IRFPDs, respectively. The included studies were assessed as having low to moderate risk of bias using RoB 2, NOS, and JBI tools, but GRADE assessment yielded evidence of very low certainty. CONCLUSIONS: ZDRs generally demonstrated acceptable to excellent short- to long-term survival and success outcomes. Mid- to long-term clinical performance was varied according to restoration types. The RBFPDs had relatively low complication rates, followed by the SCs, the FPDs and the IRFPDs. CFPDs exhibited relatively low success rates and high complication rates. The predominant biological complications were secondary caries and pulpitis or apical periodontitis, while chipping and debonding were the most common mechanical complications. APA treatment followed by application of MDP is capable of producing favorable short-term clinical outcomes. CLINICAL SIGNIFICANCE: ZDRs except for CFPDs could achieve favorable mid- to long-term clinical performance. CFPDs should be conducted with caution.

Zirconium↗
PubMed2003

Monotonic flexure and fatigue strength of composites for provisional and definitive restorations.

STATEMENT OF PROBLEM: Ordinarily, the mechanical strength of composites is characterized by their flexural strength. Information as to the material's fatigue strength is seldom provided. PURPOSE: The purpose of this study was to compare the flexural strength and the resistance to fatigue loading of composites and an acrylic resin for provisional and definitive restorations. MATERIAL AND METHODS: Artglass, Colombus, and Targis (composites) and Jet, Protemp II, Protemp Garant, and Provipont DC (provisional restorations) were subjected to mechanical tests. Fatigue tests (MPa) (n = 30 specimens/group) were conducted with the rotating-bending cantilever design. Monotonic flexural strength (MPa) (n = 10) was determined in 3-point bending tests. Fatigue resistance was analyzed via the staircase procedure, and flexural strength was examined by use of the 2-parameter Weibull distribution (confidence intervals at 95%). RESULTS: The mean fatigue resistances (S(50)) in MPa +/- SD were: Targis, 62.1 +/- 7.0; Artglass, 58.5 +/- 3.7; Colombus, 54.6 +/- 6.2; Provipont DC, 29.5 +/- 3.2; Protemp II, 23.1 +/- 5.3; Jet, 22.8 +/- 8.3; Protemp Garant, 19.6 +/- 4.6. The flexure strengths (Weibull's S(0)) in MPa and their shape parameters (m) were: Colombus, 145.2 (13.1); Targis, 110.3 (7.8); Artglass, 5.9 (5.4); Jet, 150.9 (17.3); Provipont DC, 97.3 (23.8); Protemp II, 57.9 (6.4); Protemp Garant, 54.2 (12.8). The S(50) of Targis was significantly higher than that of Colombus but not different from Artglass. In flexion, the S(0) of Colombus was significantly higher than that of Artglass and Targis. The S(50) ranged between 40% and 60% of the S(0) for the composites and between 15% and 30% for the provisional restorative materials. CONCLUSIONS: Correlations between monotonic flexure strength and resistance to fatigue loading were weak. Because fatigue tests are considered more pertinent than monotonic tests as to their predictive value, it is concluded that flexure strength data alone may not provide relevant information for long-term clinical performance. The material's resistance to fatigue loading should also be determined.

Acrylic Resins↗
PubMed2003

Detection of in vitro demineralization adjacent to restorations using quantitative light induced fluorescence (QLF).

AIM: Quantitative light-induced fluorescence (QLF) is a technique for the detection, quantification, and longitudinal monitoring of early carious lesions. The technique is non-destructive and can be used in vivo. Using the natural fluorescence of teeth, and the loss of such fluorescence in demineralized enamel, QLF is a repeatable and valid optical caries monitor. Previously used in smooth and occlusal surfaces, the purpose of this pilot study was to determine if QLF could detect, and longitudinally monitor, demineralization adjacent to a range of restorative materials. METHODS: Fifteen previously extracted lower third molars were selected based upon the lack of any visible demineralization. A single burr hole was placed on the buccal surface and the cavity restored with amalgam, composite, compomer, glass ionomer or a temporary filling material. The buccal surface was then coated in an acid resistant nail varnish leaving an exposed area around the restoration and also a similar sized control region. The teeth had QLF images taken at baseline and were then subjected to a demineralizing buffer, further QLF images were subsequently taken at 72 and 144 h. Transverse microradiography was used to confirm the presence of early, subsurface lesions at the completion of the cycle (144 h). QLF images were analyzed by a single blinded examiner and values for change in radiance fluorescence were computed. These values were recorded as loss of radiance fluorescence loss integrated over area of lesion and expressed as DeltaQ. RESULTS: The appearance of each material under QLF and the change in fluorescence is described. Amalgam, glass ionomer and the temporary material all exhibited reduced fluorescence, while composite and compomer showed increased fluorescence, when compared with surrounding enamel. There was no change in fluorescence of the materials when subjected to experimental demineralizing conditions. Readings at 72 and 144 h demonstrated demineralization adjacent to the restorations and at the exposed control. Significant differences were detected between baseline, 72 and 144 h using ANOVA on all restorations with the exception of compomer where significance was noted between baseline and 144 h, p>0.05. CONCLUSIONS: This pilot study has demonstrated the ability for QLF to detect and monitor secondary caries. Analysis techniques should be based upon the subtraction of baseline DeltaQ scores from subsequent images. Further research is required to assess the ability of QLF to detect secondary lesions in vivo.

Analysis of Variance↗
PubMed2002

Crowns and other extra-coronal restorations: porcelain laminate veneers.

Porcelain veneers are resin-bonded to the underlying tooth and provide a conservative method of improving appearance or modifying contour, without resorting to a full coverage crown. The porcelain laminate veneer is now a frequently prescribed restoration for anterior teeth. The sums spent by the Dental Practice Board on this type of treatment increased from quarter of a million pounds in 1988/89 to over seven million in 1994/95, representing some 113,582 treatments. Since that time the number has stabilised at over 100,000 veneers prescribed each year. The objective of this paper is to give a practical guide on providing these restorations.

Communication↗
PubMed1995

Endodontic failure--a problem from top to bottom.

Endodontically treated teeth are susceptible to bacterial contamination through exposure to oral fluids. It is crucial, therefore, that restorations placed during and after root canal therapy protect the root canal from oral contamination. This paper highlights the clinical steps necessary to reduce the risk of contamination in root-filled teeth.

Bacterial Infections↗
PubMed1997

Effect of provisional cements on the bond strength of various adhesive bonding systems on dentine.

Temporization of prepared teeth is needed for protection of the pulp and the restoration of the patients' aesthetic and functional needs. When zinc-oxyphosphate cement is used, eugenol-containing provisional cements are preferred because of their sedative effect to the pulp and because of their acceptable compressive strength. However, prior to definitive adhesive cementation with composite luting resins and dentine bonding agents the use of eugenol-containing provisional cements has to be considered critical because eugenol severely disturbs the polymerization of resinous materials. The purpose of this study was to compare shear bond strength values of various adhesive luting systems on dentine which had been in contact with various provisional cements prior to dentine bonding. The results show that the provisional cements which were used considerably decreased some of the bond strength values of the dentine bonding systems tested. Freegenol and Fermit, however, seem to have beneficial effects on the SBS values of Syntac and ART Bond. The only bonding system which produces acceptably high average SBS values with a eugenol-containing provisional cement was P-Bond.

Adhesives↗
PubMed2002

Endodontic failure caused by inadequate restorative procedures: review and treatment recommendations.

A review of the literature was performed to determine whether prompt placement of coronal restorations, including sealing and placement of posts and cores, can positively influence the long-term prognosis of teeth after root canal therapy. Both hand and MEDLINE searches were employed to identify peer-reviewed articles on radicular apical integrity after coronal restorations, especially where root canal space was used for post and core fabrication. A total of 41 articles published between 1969 and 1999 (the majority from the 1990s) were reviewed. The literature suggests that the prognosis of root canal-treated teeth can be improved by sealing the canal and minimizing the leakage of oral fluids and bacteria into the periradicular areas as soon as possible after the completion of root canal therapy.

Bacteria↗
PubMed2002

A technique for achieving prerestorative minor tooth movement with orthodontic separators.

This article describes 2 patient treatments in which a simple technique was used to realign teeth before restorative procedures. Elastic separators were used to tip the desired tooth into its original position. This restored a normal crown contour and improved the tooth's long-axis alignment. The procedure is simple and inexpensive, and treatment time relatively quick compared with other orthodontic procedures.

Bicuspid↗
PubMedDate not supplied

Extended CT scale overcomes restoration caused streak artifacts for dental identification in CT--3D color encoded automatic discrimination of dental restorations.

OBJECTIVE: Besides DNA, dental radiographs play a major role in the identification of victims in mass casualties or in corpses with major postmortem alterations. Computed tomography (CT) is increasingly applied in forensic investigations and is used to scan the dentition of deceased persons within minutes. We investigated different restoration materials concerning their radiopacity in CT for dental identification purposes. METHODS: Extracted teeth with different filling materials (composite, amalgam, ceramic, temporary fillings) were CT scanned. Radiopacities of the filling materials were analyzed in extended CT scale images. RESULTS: Radiopacity values ranged from 6000-8500HU (temporary fillings), 4500-17000HU (composite fillings) and >30710HU (Amalgam and Gold). The values were used to define presets for a 3D colored volume rendering software. CONCLUSIONS: The effects of filling material caused streak artifacts could be distinctively reduced for the assessment of the dental status and a postprocessing algorithm was introduced that allows for 3D color encoded visualization and discrimination of different dental restorations based on postmortem CT data.

Acrylic Resins↗
PubMed1980

Determinants of the quality of restorative dental care.

This article reports the results of an analysis to determine the relationships between the quality of restorative dental care for 1,466 patients and 9 categories of dentist characteristics for 102 volunteer Washington practitioners. In this study, patients were recalled and restorations were examined clinically. Questionnaires were administered to patients and dentists. The dependent measure is a weighted average of scores for operative dentistry and crown and bridge. Stagewise regression was used to adjust for differences in patient oral health and assessor bias. Models were postulated in each category of dentist characteristics and beta vectors were estimated by multiple regression. The best predictors formed a significant model (p = 0.000) which explained 26 per cent of the variance.

Attitude of Health Personnel↗
PubMed2006

Is there life after Buckley's formocresol? Part II - Development of a protocol for the management of extensive caries in the primary molar.

OBJECTIVE: To produce a working clinical protocol for pulp therapy techniques in the extensively carious primary molar. INTRODUCTION: The International Agency for Research on Cancer has recently classified formaldehyde as carcinogenic to human beings. As such, a medicament that can be used to replace formocresol in clinical practice should be identified. METHODS: Part I of this paper explored the currently available alternative interventions and materials to formocresol in the form of a narrative review following an extensive literature search. Part II now presents the formation of a specialist group to establish an evidence-based protocol, for the management of the extensively carious primary molar. CONCLUSION: A protocol and key points document have been developed to assist clinicians in their treatment planning. Areas for further postgraduate training are identified.

Algorithms↗