SEARCH · PubMed Health

Results for “Hydroxybutyrates”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

PubMed1995

Enzymatic assay of hydroxybutyric acid monomer formation in poly(beta-hydroxybutyrate) degradation studies.

A novel method for monitoring the degradation of poly(beta-hydroxybutyrate) based on the enzymatic assay of beta-hydroxybutyrate (HBA) monomers has been developed. The method is particularly applicable to forms of the polymer, such as fibre and microcapsules, for which conventional surface and gravimetric monitoring techniques are not readily applicable. The method involves the use of enzyme HBA dehydrogenase in a reaction that converts nicotinamide adenine dinucleotide (NAD) to its reduced form (NADH). The conversion is associated with an increase in light absorption at 340 nm which thus serves to indicate the concentration of HBA monomer in the sample. The application of the methodology to the degradation of poly(beta-hydroxybutyrate) gel spun fibres has been used to demonstrate its potential use as a quantitative monitoring technique in the study of the hydrolysis of this polymer.

Hydrogen-Ion Concentration↗

PubMed2007

In vitro biocompatibility evaluation of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymer in fibroblast cells.

Among the various biomaterials available for tissue engineering and therapeutic applications, microbial polyhydroxyalkanoates offer the most diverse range of thermal and mechanical properties. In this study, the biocompatibility of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB); containing 50 mol % of 4-hydroxybutyrate] copolymer produced by Delftia acidovorans was evaluated. The cytotoxicity, mode of cell death, and genotoxicity of P(3HB-co-4HB) extract against V79 and L929 fibroblast cells were assessed using MTT assay, acridine orange/propidium iodide staining, and alkaline comet assay, respectively. Our results demonstrate that P(3HB-co-4HB) treated on both cell lines were comparable with clinically-used Polyglactin 910, where more than 60% of viable cells were observed following 72-h treatment at 200 mg/mL. Further morphological investigation on the mode of cell death showed an increase in apoptotic cells in a time-dependent manner in both cell lines. On the other hand, P(3HB-co-4HB) at 200 mg/mL showed no genotoxic effects as determined by alkaline comet assay following 72-h treatment. In conclusion, our study indicated that P(3HB-co-4HB) compounds showed good biocompatibility in fibroblast cells suggesting that it has potential to be used for future medical applications.

Animals↗

PubMed2001

Comonomer unit composition and thermal properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)s biosynthesized by Ralstonia eutropha.

A series of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)s [P(3HB-co-4HB)s] with different 4HB content, biosynthesized by Ralstonia eutropha H16 with mixed carbon sources of 4-hydroxybutyric acid (4HBA) and butyric acid, were fractionated by solvent/nonsolvent fractionation into copolyester fractions with different 4HB content and narrower compositional distribution. The fractions obtained were classified into two groups, 3HB- and 4HB-rich P(3HB-co-4HB)s. The thermal properties were investigated for these fractionated copolyesters. With increasing 4HB content, the melting temperature at first decreased while 3HB content was rich, and then increased while 4HB content was rich. The glass transition temperature decreased linearly with increasing 4HB content. The 4HB-rich P(3HB-co-4HB) was found to be immiscible with the 3HB-rich P(3HB-co-4HB), as two glass transitions corresponding to those of respective P(3HB-co-4HB)s were observed by DSC. It was concluded that as-produced bacterial P(3HB-co-4HB) samples used in this study should be considered as immiscible polymer blends.

Calorimetry, Differential Scanning↗

PubMedDate not supplied

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate.

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.

Anaerobiosis↗

PubMed1993

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)

Bacteria↗

PubMed1995

In situ biodegradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in natural waters.

The biodegradation of samples of poly(3-hydroxybutyrate)(P(3HB)), poly(3-hydroxybutyrate-co-10%-3-hydroxyvalerate)(P(3HB-co-10 %-3HV)), and poly 3-hydroxybutyrate-co-20%-3-hydroxyvalerate)(P(3HB-co-20%- 3HV)) was investigated in situ in natural waters. The degradation was studied by decrease in mass, molecular weight, and tensile strength. In two freshwater ponds the polymers were slowly degraded. After half a year of submersion the mass loss was less than 7%. After 358 days in a freshwater canal, 34% mass loss was recorded for the homopolymer, and 77% for the P(3HB-co-10%-3-HV) samples, while the P(3HB-co-20%-3HV) samples had completely disappeared. In seawater in the harbour of Zeebrugge, P(3HB) samples lost 31% of their initial mass, and the copolymers 49-52%, within 270 days. In all of these environments, the degradation rate was faster during the summer, when the temperature of the water was higher. No relevant changes in molecular weight could be detected, indicating that the degradation took place only at the surface of the samples. The degradation resulted in considerable loss of tensile strength of the copolymer samples. Ninety-two microorganisms, mainly bacteria, able to degrade P(3HB) in polymer overlayer plates, were isolated and identified by fatty acid analysis. The isolates from one freshwater pond belonged mainly to the bacterial genus Acidovorax, while the microorganisms from the other freshwater pond belonged to various bacterial genera, to Streptomyces, and to the mould genus Penicillium. Most of the 31 bacterial isolates from seawater were identified as Alteromonas haloplanktis. The results demonstrate that P(3HB) and P(3HB-co-3HV) samples are effectively biodegradable in natural waters under real-life conditions and reveal the biodiversity of the microflora responsible for this biodegradation.

Bacteria↗

PubMed2006

Characterization of two 3-hydroxybutyrate dehydrogenases in poly(3-hydroxybutyrate)-degradable bacterium, Ralstonia pickettii T1.

Two D-(-)-3-hydroxybutyrate (3HB) dehydrogenases, BDH1 and BDH2, were isolated and purified from a poly(3-hydroxybutyrate) (PHB)-degradable bacterium, Ralstonia pickettii T1. BDH1 activity increased in R. pickettii T1 cells grown on several organic acids as a carbon source but not on 3HB, whereas BDH2 activity markedly increased in the same cells grown on 3HB or PHB. To examine their biochemical properties, bdh1 and bdh2 were cloned and overexpressed in Escherichia coli, and their purified products were characterized. The kinetic parameters indicate that BDH1 is more suitable for converting acetoacetate to 3HB than BDH2, whereas BDH2 is more efficient for the reverse reaction than BDH1. Thus, R. pickettii T1 contains two BDHs with different biochemical properties and physiological roles: BDH1 for cell growth on organic acids other than 3HB and BDH2 for cell growth on 3HB or PHB.

Biodegradation, Environmental↗

PubMed1993

Tissue response and in vivo degradation of selected polyhydroxyacids: polylactides (PLA), poly(3-hydroxybutyrate) (PHB), and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/VA).

The tissue response and in vivo molecular stability of injection-molded polyhydroxyacids--polylactides (PLA), poly(3-hydroxybutyrate) (PHB), and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/VA, 5-22% VA content)--were studied. Polymers were implanted subcutaneously in mice and extirpated at 1, 3, and 6 months in order to study tissue response and polymer degradation. All polymers were well tolerated by the tissue. No acute inflammation, abscess formation, or tissue necrosis was observed in tissues adjacent to the implanted materials. Furthermore, no tissue reactivity or cellular mobilization was evident remote from the implant site. Mononuclear macrophages, proliferating fibroblasts, and mature vascularized fibrous capsules were typical of the tissue response. Degradation of the polymers was accompanied by an increase in collagen deposition. For the polylactide series, the inflammatory response after 1 month of implantation was less for materials containing the D-unit in the polymer chain, whereas in the case of the polyhydroxybutyrate/valerates, the number of inflammatory cells increased with increasing content of the valerate unit in the polymer chain. Between 1-3 months, there was slightly more tissue response to the PHB and PHB/VA polymers than to PLA. This response is attributed to the presence of leachable impurities and a low molecular weight soluble component in the polyhydroxybutyrate/valerates. At 6 months, the extent of tissue reaction was similar for both types of polymers. All polylactides degraded significantly (56-99%) by 6 months. For a poly(L-lactide) series, degradation rate in vivo decreased with increasing initial molecular weight of the injection-molded polymer. Several samples showed pronounced bimodal molecular weight distributions (MWD), which may be due to differences in degradation rate, resulting from variability in distribution of crystalline and amorphous regions within the samples. This may also be the result of two different mechanisms, i.e., nonenzymatic and enzymatic, which are involved in the degradation process, the latter being more extensive at the later stage of partially hydrolyzed polymer. The PHB and PHB/VA polymers degraded less (15-43%) than the polylactides following 6 months of implantation. Generally, the polymer with higher valerate content (19%, 22%) degraded most. The decrease in molecular weight was accompanied by a narrowing of the MWD for PHB and copolymers; there was no evidence of a bimodal MWD, possibly indicating that the critical molecular weight that would permit enzyme/polymer interaction had not been reached. Weight loss during implantation ranged from 0-50% for the polylactides, whereas for the PHB polymers weight loss ranged from 0-1.6%.

Absorption↗

PubMed1990

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in Alcaligenes eutrophus.

Copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus at 30 degrees C in nitrogen-free culture solutions containing gamma-butyrolactone alone or with fructose or butyric acid as the carbon sources. When gamma-butyrolactone was used as the sole carbon source, the 4HB fraction in copolyester increased from 9 to 21 mol% as the concentration of gamma-butyrolactone in the culture solution increased from 10 to 25 g/l. The addition of fructose to the culture solution of gamma-butyrolactone resulted in a decrease in the 4HB fraction in copolyester. The copolyesters produced from gamma-butyrolactone and fructose by A. eutrophus were shown to have random sequence distribution of 3HB and 4HB units by analysis of the 125 MHz 13C n.m.r. spectra. In contrast, a mixture of random copolyesters with two different 4HB fractions was produced by A. eutrophus when gamma-butyrolactone and butyric acid were used as the carbon sources. These results are discussed on the basis of a proposed biosynthetic pathway of P(3HB-co-4HB). The copolyester films became soft with an increase in the 4HB fraction, and the elongation to break at 23 degrees C increased from 5 to 444% as the 4HB fraction increased from 0 to 16 mol%. The P(3HB-co-10% 4HB) film was shown to be biodegradable in an activated sludge.

Alcaligenes↗

PubMed2004

Succinic semialdehyde dehydrogenase deficiency (SSADH) (4-hydroxybutyric aciduria, gamma-hydroxybutyric aciduria).

Succinic semialdehyde dehydrogenase deficiency is one of the disorders of GABA metabolism, so it is not surprising that seizures occur as one of the symptoms in affected patients. Other features that are described include delayed development, hypotonia, myopathy with ragged red fibres, abnormal behaviour, and ocular abnormalities. Neonatal problems include prematurity, respiratory difficulties, and hypoglycaemia. The responsible gene has been identified on the short arm of chromosome 6. There are many mutations, and there is poor genotype-phenotype correlation resulting in difficulties in diagnosis. The pathogenesis of the condition is discussed, especially the results of the disturbed GABA catabolism, and the production of the gamma-hydroxybutyric acid. The many properties of this substance suggest it may act as a neurotransmitter or neuromodulator in the brain. The diagnosis may be difficult as the clinical picture is not really suggestive, but the MRI examination can help if it shows abnormalities in the globus pallidus. It will be confirmed by finding an excess of 4-hydroxybutyric acid in the body fluids; and the methods of estimation are discussed. Prenatal diagnosis is possible using a combination of methods. Treatment possibilities are limited. Vigabatrin should be of value as it is an inhibitor of GABA transaminase, but results have been disappointing. Symptomatic treatment may well be needed for control of seizures, abnormal behaviour and other disorders; and special educational needs must be served.

Aldehyde Oxidoreductases↗

PubMed2006

In vitro biocompatibility of electrospun poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fiber mats.

In the present contribution, the potential for use of the ultrafine electrospun fiber mats of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as scaffolding materials for skin and nerve regeneration was evaluated in vitro using mouse fibroblasts (L929) and Schwann cells (RT4-D6P2T) as reference cell lines. Comparison was made with PHB and PHBV films that were prepared by solution-casting technique. Indirect cytotoxicity assessment of the as-spun PHB and PHBV fiber mats with mouse fibroblasts (L929) and Schwann cells (RT4-D6P2T) indicated that the materials were acceptable to both types of cells. The attachment of L929 on all of the fibrous scaffolds was significantly better than that on both the film scaffolds and tissue-culture polystyrene plate (TCPS), while RT4-D6P2T appeared to attach on the flat surfaces of TCPS and the film scaffolds much better than on the rough surfaces of the fibrous scaffolds. For L929, all of the fibrous scaffolds were superior in supporting the cell proliferation to the film counterparts, but inferior to TCPS at days 3 and 5, while, for RT4-D6P2T, the rough surfaces of the fibrous scaffolds appeared to be very poor in supporting the cell proliferation when comparing with the smooth surfaces of TCPS and the film scaffolds. Scanning electron microscopy was also used to observe the behavior of both types of cells that were cultured on both the fibrous and the film scaffolds and glass substrate for 24 h.

Animals↗

PubMedDate not supplied

Production of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Erwinia sp. USMI-20.

A locally isolated soil microorganism identified as Erwinia sp. USMI-20 has been found to produce poly(3-hydroxybutyrate), P(3HB), from either palm oil or glucose and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3HB-co-3HV), from a combination of palm oil and a second carbon source of either one of the following compounds: propionic acid, n-propanol, valeric acid and n-pentanol. It was found that Erwinia sp. USMI-20 could produce P(3HB) up to 69 wt.% polymer content with a dry cell weight of 4.4 g/l from an initial amount of 14.5 g/l of glucose followed by a feeding rate of glucose at 0.48 g/h glucose. On the other hand, the bacteria can achieve 46 wt.% of P(3HB) and a dry cell weight of 3.6 g/l from a batch fermentation in a 10-l fermentor from an initial concentration of 4.6 g/l of palm oil. Further characterisation of the polymer production was also carried out by using different types of palm oil. Among the different palm oils that were used, crude palm oil was the best lipid source for P(3HB) production as compared to palm olein and palm kernel oil. In the production of the copolymer, P(3HB-co-3HV), the highest mole fraction of 3-HV units could be as high as 47 mol% from a single feeding of valeric acid upon initial growth on palm oil.

Culture Media↗

PubMed2001

Biosynthesis of poly(3-hydroxybutyrate-co-3-mercaptobutyrate) as a sulfur analogue to poly(3-hydroxybutyrate) (PHB).

A hitherto unknown copolymer that contains sulfur in the backbone linking 3-hydroxybutyrate and 3-mercaptobutyrate by thioester linkages, poly(3HB-co-3MB), was synthesized by the polyhydroxyalkanoate-(PHA-) accumulating bacterium Ralstonia eutropha, when 3-mercaptobutyric acid was fed as the carbon source in addition to gluconate. The chemical structure of this novel polymer was confirmed by gas chromatography/mass spectrometry, infrared spectroscopy, 1H and 13C nuclear magnetic resonance spectroscopy, and elemental sulfur analysis. Different poly(3HB-co-3MB) samples were isolated and characterized, and the molar 3MB fraction contributed up to 72 mol%. Regarding the chemical structure of 3-mercaptobutyrate, which is analogous to 3-hydroxybutyrate, the incorporation of this novel polymer constituent represents a second example of 3-mercaptoalkanoates that are incorporated into biopolymers by the PHA synthase of R. eutropha.

Biopolymers↗

PubMedDate not supplied

Enzymatic degradation processes of poly[(R)-3-hydroxybutyric acid] and poly[(R)-3-hydroxybutyric acid-co-(R)-3-hydroxyvaleric acid] single crystals revealed by atomic force microscopy: effects of molecular weight and second-monomer composition on erosion rates.

Enzymatic degradation processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and poly[(R)-3-hydroxybutyric acid-co-(R)-3-hydroxyvaleric acid] (P(3HB-co-3HV)) single crystals in the presence of PHB depolymerase from Ralstonia pickettii T1 were studied by real-time and static atomic force microscopy (AFM) observations. Fibril-like crystals were generated along the long axis of single crystals during the enzymatic degradation, and then the dimensions of fibril-like crystals were analyzed quantitatively. The morphologies and sizes of fibril-like crystals were dependent on the molecular weight and copolymer composition of polymers. For all samples, the crystalline thickness gradually decreased toward a tip from the root of a fibril-like crystal after enzymatic degradation for 1 h. The thinning of fibril-like crystals may be attributed to the destruction of chain-packing structure toward crystallographic c axis by the adsorption of enzyme. From the real-time AFM images, it was found that at the initial stage of degradation the enzymatic erosion started from the disordered chain-packing region in single crystals to form the grooves along the a axis. The generated fibril-like crystals deformed at a constant rate along the a axis with a constant rate after the induction time. The erosion rate at the grooves along the a axis increased with a decrease of molecular weight and with an increase of copolymer composition. On the other hand, the erosion rate along the a axis, at the tip of the fibril-like crystal, was dependent on only the copolymer composition, and the value increased with an increase in the copolymer composition. The morphologies and sizes of fibril-like crystals were governed by both the erosion rates along the a axis at the grooves and tip of fibril-like crystals. In addition, we were able to estimated the overall enzymatic erosion rate of single crystals by PHB depolymerase from the volumetric analysis.

Crystallization↗

PubMed2003

Selective gamma-hydroxybutyric acid receptor ligands increase extracellular glutamate in the hippocampus, but fail to activate G protein and to produce the sedative/hypnotic effect of gamma-hydroxybutyric acid.

Two gamma-hydroxybutyric acid (GHB) analogues, trans-gamma-hydroxycrotonic acid (t-HCA) and gamma-(p-methoxybenzyl)-gamma-hydroxybutyric acid (NCS-435) displaced [3H]GHB from GHB receptors with the same affinity as GHB but, unlike GHB, failed to displace [3H]baclofen from GABAB receptors. The effect of the GHB analogues, GHB and baclofen, on G protein activity and hippocampal extracellular glutamate levels was compared. While GHB and baclofen stimulated 5'-O-(3-[35S]thiotriphospate) [35S]GTPgammaS binding both in cortex homogenate and cortical slices, t-HCA and NCS-435 were ineffective up to 1 mm concentration. GHB and baclofen effect was suppressed by the GABAB antagonist CGP 35348 but not by the GHB receptor antagonist NCS-382. Perfused into rat hippocampus, 500 nm and 1 mm GHB increased and decreased extracellular glutamate levels, respectively. GHB stimulation was suppressed by NCS-382, while GHB inhibition by CGP 35348. t-HCA and NCS-435 (0.1-1000 microm) locally perfused into hippocampus increased extracellular glutamate; this effect was inhibited by NCS-382 (10 microm) but not by CGP 35348 (500 microm). The results indicate that GHB-induced G protein activation and reduction of glutamate levels are GABAB-mediated effects, while the increase of glutamate levels is a GHB-mediated effect. Neither t-HCA nor NCS-435 reproduced GHB sedative/hypnotic effect in mice, confirming that this effect is GABAB-mediated. The GHB analogues constitute important tools for understanding the physiological role of endogenous GHB and its receptor.

Animals↗

PubMed1998

Cloning and molecular analysis of the Poly(3-hydroxybutyrate) and Poly(3-hydroxybutyrate-co-3-hydroxyalkanoate) biosynthesis genes in Pseudomonas sp. strain 61-3.

Two types of polyhydroxyalkanoate (PHA) biosynthesis gene loci (phb and pha) of Pseudomonas sp. strain 61-3, which produces a blend of poly(3-hydroxybutyrate) [P(3HB)] homopolymer and a random copolymer (poly(3-hydroxybutyrate-co-3-hydroxyalkanoate) [P(3HB-co-3HA]) consisting of 3HA units of 4 to 12 carbon atoms, were cloned and analyzed at the molecular level. In the phb locus, three open reading frames encoding polyhydroxybutyrate (PHB) synthase (PhbCPs), beta-ketothiolase (PhbAPs), and NADPH-dependent acetoacetyl coenzyme A reductase (PhbBPs) were found. The genetic organization showed a putative promoter region, followed by phbBPs-phbAPs-phbCPs. Upstream from phbBPs was found the phbRPs gene, which exhibits significant similarity to members of the AraC/XylS family of transcriptional activators. The phbRPs gene was found to be transcribed in the opposite direction from the three structural genes. Cloning of phbRPs in a relatively high-copy vector in Pseudomonas sp. strain 61-3 elevated the levels of beta-galactosidase activity from a transcriptional phb promoter-lacZ fusion and also enhanced the 3HB fraction in the polyesters synthesized by this strain, suggesting that PhbRPs is a positive regulatory protein controlling the transcription of phbBACPs in this bacterium. In the pha locus, two genes encoding PHA synthases (PhaC1Ps and PhaC2Ps) were flanked by a PHA depolymerase gene (phaZPs), and two adjacent open reading frames (ORF1 and phaDPs), and the gene order was ORF1, phaC1Ps, phaZPs, phaC2Ps, and phaDPs. Heterologous expression of the cloned fragments in PHA-negative mutants of Pseudomonas putida and Ralstonia eutropha revealed that PHB synthase and two PHA synthases of Pseudomonas sp. strain 61-3 were specific for short chain length and both short and medium chain length 3HA units, respectively.

Acyltransferases↗

PubMed2003

Purification and properties of an intracellular 3-hydroxybutyrate-oligomer hydrolase (PhaZ2) in Ralstonia eutropha H16 and its identification as a novel intracellular poly(3-hydroxybutyrate) depolymerase.

An intracellular 3-hydroxybutyrate (3HB)-oligomer hydrolase (PhaZ2(Reu)) of Ralstonia eutropha was purified from Escherichia coli harboring a plasmid containing phaZ2(Reu). The purified enzyme hydrolyzed linear and cyclic 3HB-oligomers. Although it did not degrade crystalline poly(3-hydroxybutyrate) (PHB), the purified enzyme degraded artificial amorphous PHB at a rate similar to that of the previously identified intracellular PHB (iPHB) depolymerase (PhaZ1(Reu)). The enzyme appeared to be an endo-type hydrolase, since it actively hydrolyzed cyclic 3HB-oligomers. However, it degraded various linear 3HB-oligomers and amorphous PHB in the fashion of an exo-type hydrolase, releasing one monomer unit at a time. PhaZ2 was found to bind to PHB inclusion bodies and as a soluble enzyme to cell-free supernatant fractions in R. eutropha; in contrast, PhaZ1 bound exclusively to the inclusion bodies. When R. eutropha H16 was cultivated in a nutrient-rich medium, the transient deposition of PHB was observed: the content of PHB was maximized in the log growth phase (12 h, ca. 14% PHB of dry cell weight) and decreased to a very low level in the stationary phase (ca. 1% of dry cell weight). In each phaZ1-null mutant and phaZ2-null mutant, the PHB content in the cell increased to ca. 5% in the stationary phase. A double mutant lacking both phaZ1 and phaZ2 showed increased PHB content in the log phase (ca. 20%) and also an elevated PHB level (ca. 8%) in the stationary phase. These results indicate that PhaZ2 is a novel iPHB depolymerase, which participates in the mobilization of PHB in R. eutropha along with PhaZ1.

Blotting, Western↗

PubMed1990

Serum lactate dehydrogenase, alpha-hydroxybutyrate dehydrogenase and ratio of alpha-hydroxybutyrate dehydrogenase to lactate dehydrogenase in testicular tumours.

Serum levels of Lactate Dehydrogenase (LDH), alpha-Hydroxybutyrate Dehydrogenase (HBDH) and the relative ratio of alpha-Hydroxybutyrate Dehydrogenase to Lactate Dehydrogenase (HBDH/LDH) were determined in 51 cases of histologically proved testicular germ cell tumors and 40 healthy controls. Serum LDH and HBDH levels were found to be raised in both seminomatous and non-seminomatous germ cell tumors. The ratio of HBDH/LDH was found to be statistically significant in seminomas and insignificant in non-seminomatous germ cell tumors. Furthermore, the levels of LDH and HBDH showed a fall, following treatment indicating response to therapy. Serum LDH and HBDH could both be used as tumor markers in the diagnosis of testicular germ cell tumors as well as prognostic indicators in monitoring therapy, HBDH, being more specific in monitoring therapy as compared to serum LDH.

Adolescent↗