PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Surface Properties”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMedDate not supplied

Conditions affecting cell surface properties of human intestinal bifidobacteria.

The cell surface properties of human intestinal bifidobacteria have been characterized for 30 strains isolated from a fecal sample. Strain identification to the species level was obtained by restriction analysis of the amplified 16S rRNA gene and confirmed by DNA/DNA reassociation experiments. The isolates were grouped in four genetically homogeneous clusters whose members belonged to Bifidobacterium bifidum, Bifidobacterium adolescentis, Bifidobacterium longum and Bifidobacterium pseudocatenulatum species. Cell surface properties of Bifidobacterium strains were evaluated by determining the level of hydrophobicity, adhesion to hydrocarbons and contact angle measurements, and their autoaggregation ability. The results showed high and homogeneous level of hydrophobicity in all tested strains when contact angle measurements values were considered. On the contrary, autoaggregation assays and bacterial adhesion to hydrocarbons detected interesting differences in cell surface properties among the tested Bifidobacterium strains. The highest levels of autoaggregation, detected in B. bifidum and B. adolescentis strains, were strictly dependent on the pH of the medium. Moreover, protease treatment experiments suggested that proteins had a key role in the autoaggregating ability of B. bifidum and B. adolescentis strains.

Adult↗
PubMed2001

Measurement of liquid surface properties by laser-induced surface deformation spectroscopy.

We developed a technique of picking up the liquid surface in a noncontact manner by a cw-laser radiation. The momentum change of light at the laser transmission through the air-liquid interface appears as the radiation pressure, which deforms the liquid surface into the shape determined by the balance between the Laplace force of the curved surface and the radiation pressure. The displacement of the liquid surface is inversely proportional to the surface tension, which was measured by an optical probe. The dynamic response of the liquid surface deformation was theoretically derived under the periodical modulation of the radiation pressure. The experimentally observed spectra were in good agreement with the theory giving the dynamic properties of the liquid surface. The technique of the laser induced surface deformation has potential as a measurement tool of the surface dynamic properties, such as the time-dependent surface tension and surface viscoelasticity.

Journal Article↗
PubMed2006

Diversity of the surface properties of Lactococci and consequences on adhesion to food components.

Bacteria possess surface properties, related to their charge, hydrophobicity and Lewis acid/base characteristics, that are involved in the attachment processes of microorganisms to surfaces. Fermentation bulks and food matrixes are complex heterogeneous media containing various components with different physicochemical characteristics. The aim of the present study was to investigate whether (i) bacteria present in a food matrix, interacted physicochemically at their surface level with the other constituents and (ii) the diversity of bacterial surface properties could result in a diversity of microbial adhesion to components and thus in a diversity of tolerance to toxic compounds. The surface properties of 20 lactic acid bacteria were characterized by the MATS method showing their relatively hydrophilic and various basic characteristics. The results obtained from a set of representative strains showed that (i) the strains with higher affinity for apolar solvents adsorbed more to lipids and hydrophobic compounds, (ii) the more the strains adsorbed to a toxic solvent, the less they were tolerant to this solvent. A diversity of bacterial surface properties was observed for the strains in the same species showing the importance of choosing bacteria according to their surface properties in function of technological objectives.

Adsorption↗
PubMed1996

Cell surface properties of Acinetobacter baumannii.

Cell surface properties of 78 strains of Acinetobacter baumannii of different origin (lower respiratory tract, wound, blood and environment) were investigated. The bacterial adhesion to collagen, fibronectin, fibrinogen and vitronectin was detected by particle agglutination assays. Salt aggregation tests were used to determine the cell surface hydrophobicity of isolated A. baumannii strains. We found that A. baumannii strains originating from patients with wound infection and bacteraemia showed significantly lower aggregative properties compared to respiratory and environmental strains. Electron microscopic investigations revealed more fimbriated bacterial cells among the highly aggregative A. baumannii strains. This study demonstrates that the investigated A. baumannii strains can be divided into two different groups according to their cell surface properties and source of isolation, whereas the majority of strains, from the lower respiratory tract and the hospital environment expressed strong adhesive properties.

Acinetobacter↗
PubMed2006

Variability among Bacillus cereus strains in spore surface properties and influence on their ability to contaminate food surface equipment.

Seven strains of Bacillus cereus isolated from the environment and from patients with diarrheic symptoms were examined from two angles: their spore surface properties, and their ability to adhere to stainless steel and to resist a cleaning in place (CIP) procedure. Our results revealed significant differences in their morphology (size of exosporium, length and number of appendages), hydrophobic character and surface protein composition. Most of these proteins originated in the vegetative cell and were tightly bound to the external surface of the exosporium such as EA1 or alanine racemase. Spore adhesion properties also varied from strain to strain. The ability to adhere was higher when spores were surrounded by long appendages, while the largest spores displayed the least resistance to cleaning. These observations suggest that food processing line contamination might be due to a given type of strain with specific surface properties (long appendages and small exosporium), which would represent an increased threat under the milder processing conditions required by consumers (minimally heat-treated foods for example) and by legal requirements (to limit effluents caused by hygiene procedures). Elsewhere, no clear relationship of the strain characteristics to the clinical vs. foodborne strains could be established.

Bacillus cereus↗
PubMed1996

Comparison of surface properties of human IgA, IgE, IgG and IgM antibodies with identical and different specificities.

In this paper, the authors report the use of liquid-liquid partition chromatography (LLPC) in an aqueous polyethylene glycol (PEG)/dextran two-phase system to compare the surface properties (partition properties) of human antibodies and fragments thereof. The surface properties of all the monoclonal antibodies of different classes and subclasses investigated were within the same broad range as that observed for the polyclonal antibodies and no relationship was found between the exposed surfaces of the immunoglobulins (Ig) and their heavy chain isotype. Moreover, Fc fragments from various IgG1, 2 and 4 myeloma proteins were found to exhibit similar surface properties. Employing chimeric antibodies with identical variable regions the authors found that intact IgG1, 2 and 4 displayed identical surface properties, while the corresponding IgA1, IgA2, IgG3, IgE and IgM antibodies differed both from each other and from the IgGs. The surface properties of chimeric IgG3 could be made similar to those of the IgG1, 2 and 4 chimers by partially reducing the length of the hinge section, but new differences in surface properties appeared when their hinges were of similar length. Thus, LLPC can be used to detect differences or similarities in the surface properties of the antigen-binding regions as well as the Fc part in the various isotypes. This can shed light on biological activities such as antigen binding and effector function.

Antibody Specificity↗
PubMed2003

Surface properties of aqueous amino acid solutions. I. Surface tension of hydrochloric acid-glycine and glycine-sodium hydroxide systems.

The surface tensions of aqueous solutions of four mixtures (hydrochloric acid-glycine hydrochloride, glycine hydrochloride-glycine, glycine-sodium glycinate, and sodium glycinate-sodium hydroxide) were measured as a function of total molality and mole fraction. The measurements correspond to the change in surface tension with variation of pH. The contribution of glycine hydrochloride to the increments in surface tension is equivalent to that observed for the aqueous solution of glycine, while the contribution of sodium glycinate is much larger than that of glycine. The variations in surface tension on mixing in the surface region are discussed using comparisons with mixtures of simple salts.

Amino Acids↗
PubMed1997

Adhesion of coagulase-negative staphylococci grouped according to physico-chemical surface properties.

Physico-chemical cell surface properties of 23 coagulase-negative staphylococcal strains, including contact angles, zeta potentials and elemental cell surface composition were measured, together with the adhesion of all strains to hexadecane. The data were employed in a hierarchical cluster analysis, revealing that the 23 strains comprised essentially four different groups. Groups I-III were somewhat similar to each other, but group IV was markedly distinguished from the other strains, predominantly through an elevated acidity of the cell surface. These group distinctions were not related to the presence of a capsule or slime on the strains. Adhesion of the strains to hexadecane depended critically on electrostatic interactions between the hexadecane and the staphylococci, and adhesion only occurred when the electrostatic repulsion between hexadecane and the micro-organisms was less than 500 kT at closest approach. Adhesion of six representative strains from all four groups in a parallel plate flow chamber to silicone rubber, an implant material with similar hydrophobicity to hexadecane, did not show such a critical dependence, nor did it relate with the group distinction. Possibly, microbial adhesion to substratum surfaces like silicone rubber is more complicated than adhesion to an ideally smooth and homogeneous hexadecane surface in an aqueous solution. Adhesion of all six strains to silicone rubber with an adsorbed conditioning film of plasma proteins was less than that to bare silicone rubber: initial deposition rates dropped from 2000-3000 cm-2 s-1 to 100-300 cm-2 s-1 after adsorption of plasma proteins, while the stationary end-point adhesion decreased from 10 x 10(6)-15 x 10(6) cm-2 to 1 x 10(6)-5 x 10(6) cm-2. The adhering staphylococci poorly withstood the passage of an air-bubble through the parallel plate flow chamber, regardless of the presence of a conditioning film, indicating a low affinity of these relatively hydrophilic strains for hydrophobic substratum surfaces.

Alkanes↗
PubMed2006

Effect of oxygen plasma treatment on the surface properties of tin-doped indium oxide substrates for polymer LEDs.

The effect of oxygen plasma treatment on the surface properties of tin-doped indium oxide (ITO) substrates and the changes in surface properties of treated ITO substrates with ageing time were investigated by X-ray photoelectron spectroscopy (XPS), contact angle and surface free energy measurements. Experimental results show that oxygen plasma treatment increases the oxygen concentration, decreases the carbon concentration, and enhances the surface free energy and polarity, and thereby improves the surface properties of ITO substrates. However, the improved ITO surface properties tended to decay and the surface free energy decreased, with ageing time. In addition, the ageing effect of treated ITO substrates on the performance of polymer light-emitting diodes (LEDs) was studied with respect to the driving voltage, electroluminescent luminance and efficiency. We observe that the ITO substrates aged for various times result in significant differences in optical and electrical characteristics which become worse as the ageing time increases. The optical and electrical performance of polymer LEDs is closely related to the surface properties of ITO substrate and the interface characteristics of ITO/polymer.

Journal Article↗
PubMed2006

Synthesis and characterization of nonconventional surfactants of aromatic amino acid-glycerol ethers: effect of the amino acid moiety on the orientation and surface properties of these soap-type amphiphiles.

The synthesis, characterization, and surface properties of soap-type amphiphiles comprising alkyl chains of 10-16 carbon atoms linked through an ether group to a glycerol-amino acid hydrophilic head group is described. The surface properties of members of this series derived from histidine and tyrosine were compared with those of phenylalanine and tryptophan derivatives described previously and with those of conventional soaps. In all cases, the amino acid derivatives showed superior surface properties, and an interesting differentiation was discovered regarding the orientation of tryptophan derivatives.

Glyceryl Ethers↗
PubMed1991

Population Dynamics of Rhizobium leguminosarum Tn5 Mutants with Altered Cell Surface Properties Introduced into Sterile and Nonsterile Soils.

The influence of cell surface properties on attachment to soil particles and on population dynamics of introduced bacteria was studied in sterilized and nonsterilized loamy sand and silt loam. Rhizobium leguminosarum RBL5523 and three Tn5 mutants (RBL5762, RBL5810, and RBL5811) with altered cell surface properties were used. Cellulose fibrils were not produced by RBL5762. Both RBL5810 and RBL5811 produced 80 to 90% less soluble exopolysaccharides and RBL5811 had, in addition, an altered lipopolysaccharide composition. In sterilized soil the total number of cells as well as the number of particle-associated cells of RBL5523 and RBL5810 were, in general, higher as compared with cell numbers of RBL5762 and RBL5811. Differences between strains in percentage of particle-associated cells in sterilized soil were only found at high inoculum densities, when populations increased little. In the nonsterilized silt loam, final population sizes, as well as numbers of particle-associated cells, of the parental strain (RBL5523) were higher than those of strains with altered cell surface properties after 56 and 112 days of incubation. But in general, differences in survival among the strains were not very marked. The importance of association with soil particles or aggregates for the survival of introduced cells was affirmed by the pronounced increase of the percentage of particle-associated cells during incubation in nonsterilized as well as sterilized soil. However, no clear relation among altered cell surface properties, particle association, and survival was found.

Journal Article↗
PubMed2005

Effect of direct electric current on the cell surface properties of phenol-degrading bacteria.

The change in cell surface properties in the presence of electric currents is of critical concern when the potential to manipulate bacterial movement with electric fields is evaluated. In this study, the effects of different direct electric currents on the cell surface properties involved in bacterial adhesion were investigated by using a mixed phenol-degrading bacterial culture in the exponential growth phase. The traits investigated were surface hydrophobicity (measured by adherence to n-octane), net surface electrostatic charge (determined by measurement of the zeta potential), and the cell surface shape and polymers (determined by scanning electron microscope analysis). The results showed that a lower current (less than 20 mA) induced no significant changes in the surface properties of phenol-degrading bacteria, that an electric current of 20 mA could increase the surface hydrophobicity and flatten the cell shape, and that a higher current (40 mA) could increase the surface extracellular substances and the net negative surface electrostatic charge. The results also revealed that the electric current effects on cell hydrophobicity varied with the suspending medium. We suggest that an electric current greater than 20 mA is not suitable for use in manipulation of the movement of the phenol-degrading bacteria, although such a current might favor the electrophoretic movement of the bacterial species.

Bacteria↗
PubMed1980

Surface properties of Chlamydia psittaci.

The surface properties of elementary bodies of Chlamydia psittaci were investigated by diethylaminoethyl-Sephadex chromatography, cytophoresis, partitioning in an aqueous polymer two-phase system, and hydrophobic interaction chromatography of the organism. The surface of C. psittaci was found to be hydrophobic and negatively charged at pH 7 and to have an isoelectric point of about pH 5. Reagents which block free carboxyl groups altered the surface charge of C. psittaci and caused the organism to agglomerate. The possible significance of hydrophobicity and surface charge on the ingestion of C. psittaci by host cells is discussed.

Cell Membrane↗
PubMed1986

Surface properties of developing stages of Trichuris muris.

Surface properties of developing stages of Trichuris muris were investigated by analysis of binding affinities for specific anti-parasite antibodies present in a range of infection sera; in vitro eosinophil adherence studies; and binding of the fluorescent-labelled lectins, Con A, WGA, PNA and RCA. In general, larvae of any one particular stage did not bind anti-parasite antibodies present in serum collected at an earlier stage of the infection, thus indicating a considerable degree of antigenic stage-specificity. Forty day and older parasites displayed similar binding properties and it is suggested that no major changes in surface antigenicity occur after the final moult at day 25-30 after infection. Surface properties were also examined by means of complement and antibody-mediated eosinophil adherence assays. Attachment of eosinophils was maximal with day 5 larvae, although even at this stage not all of the parasite surface was covered with attached cells. Despite adherence, eosinophils were unable to effect parasite killing, even after 48 h of incubation. These studies showed that eosinophil adherence-promoting antibodies were present in immune sera; that the larval parasite surface was able to activate complement by the alternate pathway with subsequent generation of C3b molecules, and that the parasite was able to withstand eosinophil adherence and secretion by an as yet unidentified evasive stratagem. Studies with fluorescent-labelled lectins showed that all larval stages (days 5-25 after infection) were positive for Con A binding. Early larval stages (days 5-10 after infection) also bound PNA and WGA. Interestingly, recently moulted individuals rarely exhibited fluorescence, but cast cuticles fluoresced brightly.

Animals↗
PubMed1993

Influence of intra-amoebic and other growth conditions on the surface properties of Legionella pneumophila.

The surface properties of Legionella pneumophila were examined by analyzing outer membrane (OM) proteins, lipopolysaccharides (LPS), and cellular fatty acids after growth within Acanthamoeba polyphaga and in vitro under various nutrient-depleted conditions. Intra-amoeba-grown legionellae were found to differ in several respects from cells grown in vitro; most notably, they contained a 15-kDa OM protein and a monounsaturated straight-chain fatty acid (18:1(9)). These compounds were also found in abundant quantities in the host amoeba. Immunoblot analysis of intra-amoeba-grown legionellae with antiacanthamoebic serum revealed that both the bacterial whole cells and Sarkosyl-extracted OMs contained amoebic antigens. The findings suggest that the 15-kDa OM protein is likely to be of amoebic origin and associates with the OM of the bacterium. It is proposed that disruption of amoebic membranes, as a result of intra-amoebic infection, may liberate macromolecules, including a 15-kDa polypeptide, a major constituent of the amoebic membrane, which adhere to the surface of the legionellae. Growth under specific nutrient depletions also had a significant effect on the surface composition of L. pneumophila. Cells grown under phosphate depletion were markedly sensitive to protease K digestion and contained lower levels of LPS, as observed by silver staining of the digests on polyacrylamide gels. Intra-amoeba-grown cells contained more bands than the in vitro-grown organisms, reflecting further differences in the nature of the LPS. The whole-cell fatty acids of the phosphate-depleted cells were appreciably different from those of cells grown under other nutritional conditions. We found no evidence for expression of iron-regulated OM proteins under iron depletion.

Acanthamoeba↗
PubMed2006

Influence of swimsuit design and fabric surface properties on the butterfly kinematics.

This study investigated the influence of the covering swimsuit and the fabric surface properties on the butterfly stroke kinematics. Surface properties were evaluated by wetting measurements of two fabric samples: one for training suits and one for competition suits. The surface of the second one was coated by mechanochemical treatment in order to modify its surface properties. Nine national level swimmers performed a 50-m butterfly at submaximal velocity in three swimsuit conditions: conventional, long, and coated long swimsuits. From video recording, the hip was digitized at the entry and exit of the swimmer's hand in order to calculate the duration, hip displacement, and hip linear velocity during underwater and recovery phases and during stroke. The results for wetting show that competition fabric was more water-repellent than training fabric, but both were isotropic. Moreover, the mechanochemical treatment increased water repellency and anisotropy. The swimming results indicated that, when compared to a conventional swimsuit, wearing a coated long swimsuit increased hip linear velocity during stroke, and particularly during the recovery phase which had a shorter duration. These results suggest that the covering swimsuit should be coupled with the water repellent and anisotropic properties of the fabric surface in order to improve swimming performance.

Biomechanical Phenomena↗
PubMed2001

Studies on the effect of surface properties on the biocompatibility of polyurethane membranes.

To study the effect of surface properties on the biocompatibility of biomaterials based on the same material, polyurethane membranes with different surface properties were prepared. Myoblast culture and interleukin-1 (IL-1) generation in an air pouch model and in vitro monocyte culture were used to examine biocompatibility of different polyurethane membranes. Polyurethane membranes were found to exhibit significant differences depending on their surface properties prepared by different fabrication processes. When myoblasts were cultured on polyurethane surfaces, the smooth and hydrophobic membrane (F1), prepared by the solvent evaporation process, showed the greatest inhibition of myoblast adhesion compared with other porous and hydrophilic membranes (F2, F3 and F4), prepared by immersing the polymer solution into a precipitation bath. In contrast, IL-1 generation by monocytes/macrophages on the membrane F1 was more severe than those on the porous and hydrophilic membranes. Based on our results, the interaction of biomaterials with various cells is discussed.

Adult↗