PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Silicon Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
PubMed1992

[Changes in gastrointestinal mucins caused by attapulgite. Experimental study in rats].

A histochemical study was carried out to evaluate the changes occurring in mucins secreted by the rat stomach and intestine following a 7 day-treatment with a cytoprotective clay: attapulgite. Staining of gastrointestinal sections was performed with periodic acid-Schiff reagent, alcian blue pH 2.5 and pH 1.0, and with lectin conjugated with horseradish peroxidase for detecting complex carbohydrates. When compared with controls, attapulgite induced an increase in carboxylic mucin content in the cells of the crypts associated with a decrease in sulphated mucins and in binding with soy bean agglutinin in surface epithelial cells in the fundic zone. In the antrum, staining with wheat germ agglutinin was decreased in the crypt cells while Ulex europaeus agglutinin affinity was increased in the glandular cells. The duodenum was characterized by increased binding with Ulex europaeus agglutinin in Brunner's glands. These results show that the polysaccharidic components of the gastrointestinal glycoproteins are modified by attapulgite, and this mechanism may be involved in its cytoprotective effects.

Acetylglucosamine↗
PubMed2005

[Study on the measurement of residual stresses around indentations in SiC/Al2O3 nanocomposite using fluorescence].

The residual stresses induced by an indentation were studied in 5% SiC/Al2O3 nanocomposite using fluorescence spectroscopy in this work. It was found that within the indentation and the region of about 10 microm outside the impression, the broadening of the R-lines is obvious, and that the compression shift is a strong function of the distance from the indentation centre. From the observed frequency shifts, the hydrostatic stresses in regions sampled in the indentation, and in the complex stress field surrounding it were measured. The same variation regularity of stresses exists along the diagonal direction and the side vertical bisector direction. The symmetry of the residual stress field around the indentation was also found.

Algorithms↗
PubMed1983

Induction of squamous metaplasia in organ cultures of hamster trachea by naturally occurring and synthetic fibers.

Asbestos exhibits many properties of classical tumor promoters. These characteristics include the ability to stimulate proliferation and inhibit normal differentiation of cells. In organ cultures of trachea, crocidolite and amosite asbestos stimulate squamous metaplasia, a pathological process in which a rapidly proliferating squamous epithelium replaces the normal epithelium. We hypothesized that the induction of metaplasia depends upon the fibrous nature of asbestos. Accordingly, several naturally occurring and synthetic fibrous materials and their nonfibrous analogues were assessed for their ability to induce metaplastic changes in tracheal mucosa of the Syrian hamster. Exposure to both crocidolite asbestos and fiberglass resulted in significant increases (p less than 0.05) in squamous metaplasia over a range of dosages (1.0, 4.0, 16.0 mg/ml). Attapulgite (palygorskite) and both "long-" and "short-" fiber preparations of chrysotile asbestos had similar but less marked effects. Nonfibrous analogues of each material (riebeckite, antigorite, and glass particles) failed to produce metaplasia. Asbestos, and fibrous materials in general, appear to stimulate squamous metaplasia because of their fibrous geometry.

Animals↗
PubMedDate not supplied

Low-cost device for avoiding bulk susceptibility artifacts in chemical-selective fat saturation MR of the head and neck.

An inexpensive, commercially available travel pillow filled with a suspension of attapulgite provided good suppression of inhomogeneous chemical-selective fat saturation in imaging of the head and neck. This device is assembled from readily available materials at a low cost and compares favorably with a commercially available perfluorochemical-filled device.

Adipose Tissue↗
PubMed1996

Absence of skin sensitivity to oxides of aluminium, silicon, titanium or zirconium in patients with Crohn's disease.

BACKGROUND: Some metallic compounds, especially of zirconium, can cause cell mediated granulomatous inflammation of the skin. Pigment granules containing compounds of aluminium, silicon, and titanium have been observed within macrophages in the wall of the small intestine in health and in Crohn's disease. Zirconium compounds can be ingested in toothpaste. AIM: To determine in a pilot study if granulomatous sensitivity can be detected to compounds of these metals or silicon after injection into the skin of patients with Crohn's disease. SUBJECTS: Eight patients with Crohn's disease known to have had granulomata in the intestine and not currently treated with corticosteroids, and two healthy controls. METHOD: Two intradermal injections each of 0.1 ml of a 0.02% suspension of one of the compounds made in the abdominal wall of each subject. The site was marked and full thickness skin biopsy performed six weeks later. RESULT: A foreign body granuloma was observed on histological examination of two biopsy specimens but no evidence of a cell mediated response in any subject. CONCLUSION: No support was found for the hypothesis that Crohn's disease is due to a specific sensitivity to ingested metallic or silicon compounds.

Aluminum Oxide↗
PubMedDate not supplied

Silicone rubber splinting for athletic hand and wrist injuries.

The use of a silicone rubber protective playing splint facilitates an athlete's continued or earlier return to sport participation following injury. The purposes of this paper are to review the literature and to describe the properties, fabrication procedures, and indications for use of the silicone rubber compound materials used to splint athletic hand and wrist injuries. In general, the use of silicone rubber protective splints for stable orthopedic hand and wrist injuries has been shown to be effective.

Athletic Injuries↗
PubMed1990

Unscheduled DNA synthesis in rat pleural mesothelial cells treated with mineral fibres.

Unscheduled DNA synthesis (UDS) was studied in confluent rat pleural mesothelial cells (RPMCs) arrested in G0/G1 with hydroxyurea (HU) and treated with various fibre types, i.e., chrysotile, crocidolite or attapulgite. In addition, the effects of UV light and of benzo[a]pyrene were determined as references. Using autoradiography after [3H]thymidine incorporation ([3H]dThd), RPMCs treated with 4 micrograms/cm2 of chrysotile fibres exhibited a low but significant enhancement of net grains compared to untreated cells. Treatment with higher doses of chrysotile was not possible because of the impairment of microscopic observation due to the presence of the fibres. Using liquid scintillation counting, RPMCs treated with chrysotile or crocidolite showed a significant dose-dependent increase in [3H]dThd incorporation compared to untreated cells. In contrast, attapulgite did not enhance [3H]dThd incorporation compared to untreated cells. Treatment of RPMCs with 1, 2 or 4 micrograms/ml of benzo[a]pyrene resulted in a significant increase in [3H]dThd incorporation. In order to discount a possible role of S cells in the augmentation of [3H]dThd incorporation, despite the presence of 5 mM HU, S cells were counted by autoradiography. Results indicated that the percentage of S cells was similar in asbestos-treated and untreated cultures. Stimulation of the S phase also seems unlikely because treatment of RPMCs with asbestos fibres in the absence of HU resulted in a reduction of [3H]dThd incorporation attributed to an impairment of the S phase by the fibres. 1-4 micrograms/ml benzo[a]pyrene or 10-50 J/m2 UV light resulted in an approximate doubling of [3H]dThd incorporation. The effects of inhibitors of DNA repair were determined in chrysotile-treated RPMCs. [3H]dThd incorporation was inhibited by cytosine arabinoside and nalidixic acid. These results show that asbestos produces UDS in RPMCs.

Animals↗
PubMed2006

Complex electrooptic research of nano-particle parameters in colloids.

A research of some colloids has been carried out by means of dynamic light scattering, electrooptical and magnetooptical techniques. Intensity autocorrelation functions of scattered light have been compared to the relaxation curves of electrooptical effect for colloid particles of different shapes. The results of complex research confirm that the complicated character of light scattering by particles allows us to use the methods of birefringence and dichroism only formally when studying most colloid systems. Very thin nano-disperse structures are an exception to this rule. The investigation of polydispersity of some colloids was carried out by magnetooptical and two electrooptical techniques. Size distribution functions resulted from the different techniques agree. This justifies the suppositions about particle light scattering that are required for the use of the methods.

Alkanes↗
PubMed2006

Properties of silorane-based dental resins and composites containing a stress-reducing monomer.

OBJECTIVE: To evaluate properties of silorane-based resins and composites containing a stress reducing monomer. METHODS: Resin mixtures and composites were formulated containing (a) a developmental stress reducing monomer [TOSU; Midwest Research Institute]; (b) Sil-Mix (3M-ESPE); (c) photo cationic initiator system. Standard BISGMA/TEGDMA resin (B/T) and composite (Filtek Z250) were used as controls. Polymerization volume change was measured using a NIST mercury dilatometer and polymerization stress using an Enduratec mechanical testing machine. Three point bend tests determined flexural elastic modulus, work of fracture, and ultimate strength (ADA 27; ISO 4049). Fracture toughness was measured using ASTM E399-90. Four groups of resins and composites were tested: Sil-Mix, methacrylate standard, and Sil-Mix with two addition levels of TOSU. An ANOVA was used and significant differences ranked using Student-Newman-Keuls test (alpha=0.05). RESULTS: Polymerization stress values for resins containing TOSU were significantly less than the other materials. Polymerization shrinkage values for Sil-Mix formulations were significantly less than for B/T, but were not different from each other. TOSU-containing formulations generally had somewhat lower mechanical properties values than Sil-Mix or B/T. Polymerization stress values for Sil-Mix-based composites were significantly less as compared to Z250. The 1wt.% TOSU composite had the lowest stress. No difference between composite groups was noted for fracture toughness or work of fracture. For ultimate strength, the 5wt.% TOSU formulation differed significantly from Z250. All Sil-Mix formulations had elastic modulus values significantly different from Z250. SIGNIFICANCE: The ability of TOSU to reduce polymerization stress without a proportional reduction in mechanical properties provides a basis for improvement of silorane-based composites.

Alkanes↗
PubMed2002

Synthesis and application of arylmonophosphinoferrocene ligands: ultrafast asymmetric hydrosilylation of styrene.

A short and efficient synthetic route to a novel class of atropisomeric and planar chiral 2-aryl-1-diphenylphosphanylferrocene ligands is presented. The modular design of the ligands allows a synthetic approach in which both the aromatic moiety and the phosphino substituent can be varied easily. This permits fine-tuning of steric and electronic properties. The ligands have been tested in the asymmetric hydrosilylation of styrene where enantioselectivities up to 90% are obtained. Optimization of the palladium-to-ligand ratio resulted in hitherto unparalleled turnover frequencies (TOF) exceeding 180 000 h(-1). The absolute stereochemistry of the ligands was determined from an X-ray structure. 2D NMR experiments in combination with ab initio calculations were used to assign the conformation of the atropisomeric biarylic scaffold.

Catalysis↗
PubMed1981

Methodological aspects of prophylactic drug trials in migraine.

The purpose of this paper is to analyse methodological aspects of prophylactic drug trials in migraine. A study of ferrum quartz in 33 patients provided the necessary data base. Migraine definitions, relation between interval headache and migraine, and a number of other clinical problems are discussed. A headache diary is presented which to a certain extent allows a separation of internal headache and migraine attacks. Virtually all patients with frequent migraine attacks have interval headaches. A statistical model which allows a separation of time effects and treatment effects is presented. The inter-patient variability was much greater than intra-patient variability. This indicates that it will be difficult to obtain sufficient power with a non-crossover design. The relation between duration of treatment periods and the necessary number of patients is shown to be inversely related.

Adult↗
PubMed2006

A systematic multireference perturbation-theory study of the low-lying states of SiC3.

The three known lowest-energy isomers of SiC(3), two cyclic singlets (2s and 3s) and a linear triplet (1t), have been reinvestigated using multireference second-order perturbation theory (MRPT2). The dependence of the relative energies of the isomers upon the quality of the basis sets and the sizes of the reference active spaces is explored. When using a complete-active-space self-consistent-field reference wave function with 12 electrons in 11 orbitals [CASSCF (12, 11)] together with basis sets that increase in size up to the correlation-consistent polarized core-valence quadruple zeta basis set (cc-pCVQZ), the MRPT2 method consistently predicts the linear triplet to be the most stable isomer. A new parallel direct determinant MRPT2 code has been used to systematically explore reference spaces that vary in size from CASSCF (8,8) to full optimized reaction space [FORS or CASSCF (16,16)] with the cc-pCVQZ basis. It is found that the relative energies of the isomers change substantially as the active space is increased. At the best level of theory, MRPT2 with a full valence FORS reference, the 2s isomer is predicted to be more stable than 3s and 1t by 4.7 and 2.2 kcal/mol, respectively.

Carbon Compounds, Inorganic↗
PubMed2002

Wetting characteristic of ceramic to water and adhesive resin.

STATEMENT OF PROBLEM: Maximum wetting of ceramic by adhesive resin is required to achieve optimal adhesion of the resin to ceramic. It is unknown whether the adhesion of the resin to the ceramic is affected by the surface topography and wetting by water or the adhesive resin. PURPOSE: This study was designed to characterize the effect of surface topography on the wetting of ceramics by water and adhesive resin. MATERIALS AND METHODS: Three materials, a veneering ceramic, Eris (ERV), and 2 core ceramics, Empress 1 core ceramic (E1C) and an experimental core ceramic (EXC), were used. Four surface-roughening procedures were used. They included polishing through 1200-grit SiC paper (P), air abrasion with 50 microm Al(2)O(3) (A), etching with 5% hydrofluoric acid gel (E), and a combination of airborne particle abrasion and etching (A/E). Forty bar specimens (15 x 10 x 1.5 mm) were prepared from each material (N=120). Twelve groups of 10 specimens each were prepared for the 4 surface-roughening procedures. Advancing (theta(A)) and receding (theta(R)) contact angles were measured with a CAHN Dynamic Contact Analyzer, on the basis of the Wilhelmy plate technique, with water and adhesive resin. The work of adhesion (W(A)) by the probing media was calculated by use of advancing contact angle data. The data were analyzed by t testing, analysis of variance, and Duncan's tests (alpha=0.05) to determine the statistical significance of differences in the contact angles between ceramic and water or resin as a function of surface roughening. RESULTS: In general, the mean theta(A) values were higher than the mean theta(R) values except for groups of E or A/E specimens with water used as a probing medium. E and A/E treatments yielded the lowest contact angle values, followed by A and P treatments (P<.001). The E1C exhibited the highest mean contact angles, whereas EXC exhibited the lowest mean contact angle except for the theta(R) with resin. The corresponding values for ERV were between those of E1C and EXC except for theta(R) values with resin. The resin medium yielded higher mean contact angles than the water medium for the same surfaces. W(A) ranged from 62.9 to 145.2 mJ/m(2). CONCLUSIONS: Within the limitations of this study, etching or a combination of air abrasion and etching were comparably effective in increasing the surface area for bonding. The most wettable surface as measured by the resin medium was EXC, followed by ERV and E1C.

Acid Etching, Dental↗
PubMed1988

A retrospective cohort mortality study of males mining and milling attapulgite clay.

To evaluate the possible health effects of occupational exposure to a nonasbestos mineral fiber, a cohort of 2,302 males employed for at least 1 month between 1940 and 1975 at an attapulgite (clay fiber) mining and milling facility was followed through 1975. A significant deficit of mortality (SMR = 43, 90% CI 23-76) from nonmalignant respiratory disease (NMRD) was observed for the cohort based on age-, calendar year-, and race-specific rates for U.S. males. A marked deficit of NMRD was seen regardless of presumed dust exposure level, induction-latency period, or duration employed. A statistically significant excess of mortality from lung cancer was observed among whites (SMR = 193, 90% CI 121-293), but a deficit occurred among nonwhites (SMR = 53, 90% CI 21-112). Lung cancer risk in either race was not altered substantially with presumed dust exposure level, induction-latency period, or duration employed with one exception-those employed for at least 5 years in high-exposure-level jobs.

Dust↗
PubMed1997

The primitive matrix components of the unique carbonaceous chondrite Acfer 094: a TEM study.

The mineralogical and chemical characteristics of the fine-grained matrix (< or = 3 micrometers) of the unique primitive carbonaceous chondrite Acfer 094 have been investigated in detail by scanning electron microscopy (SEM) and analytical transmission electron microscopy (ATEM). Generally, the fine-grained matrix represents a highly unequilibrated assemblage of an amorphous material, small forsteritic olivines (200-300 nm), low Ca-pyroxenes (300-400 nm), and Fe,Ni-sulfides (100-300 nm). The matrix is basically unaffected by secondary processes. Only minor amounts of serpentine and ferrihydrite, as products of hydrous alteration, are present. Texturally, the amorphous material acts as a groundmass to olivines, pyroxenes, and sulfides, mostly exhibiting rounded or elongated morphologies. Only very few clastic mineral grains have been found. The texture and chemical composition of the amorphous material are consistent with an origin by disequilibrium condensation in either the cooling solar nebula or a circumstellar environment. As such, the amorphous material may be considered as a possible precursor of matrix materials in other types of chondrites. The non-clastic matrix olivines (Fo98-99) and pyroxenes (En97-100) are suggested to have formed either by condensation in the solar nebula under highly oxidizing conditions or by recrystallization from the amorphous material. The formation of these grains by fragmentation of chondrule components is unlikely due to chemical and microstructural reasons. Rapid cooling caused the observed intergrowths of clino/orthoenstatite in the Mg-rich matrix pyroxenes. Although some similarities exist comparing the fine-grained matrix of Acfer 094 with the matrices of the unequilibrated CO3 chondrite ALHA77307 and the unique type 3 chondrite Kakangari, Acfer 094 remains unique. Since it contains the highest measured concentrations of circumstellar SiC and the second highest of diamond (highest is Orgueil), it seems reasonable to suggested that at least parts of the amorphous material in the fine-grained matrix may be of circumstellar origin.

Carbon↗