SEARCH · PubMed Health

Results for “Solvent accessibility”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

PubMed2000

Comparison of binding energies of SrcSH2-phosphotyrosyl peptides with structure-based prediction using surface area based empirical parameterization.

The prediction of binding energies from the three-dimensional (3D) structure of a protein-ligand complex is an important goal of biophysics and structural biology. Here, we critically assess the use of empirical, solvent-accessible surface area-based calculations for the prediction of the binding of Src-SH2 domain with a series of tyrosyl phosphopeptides based on the high-affinity ligand from the hamster middle T antigen (hmT), where the residue in the pY+ 3 position has been changed. Two other peptides based on the C-terminal regulatory site of the Src protein and the platelet-derived growth factor receptor (PDGFR) are also investigated. Here, we take into account the effects of proton linkage on binding, and test five different surface area-based models that include different treatments for the contributions to conformational change and protein solvation. These differences relate to the treatment of conformational flexibility in the peptide ligand and the inclusion of proximal ordered solvent molecules in the surface area calculations. This allowed the calculation of a range of thermodynamic state functions (deltaCp, deltaS, deltaH, and deltaG) directly from structure. Comparison with the experimentally derived data shows little agreement for the interaction of SrcSH2 domain and the range of tyrosyl phosphopeptides. Furthermore, the adoption of the different models to treat conformational change and solvation has a dramatic effect on the calculated thermodynamic functions, making the predicted binding energies highly model dependent. While empirical, solvent-accessible surface area based calculations are becoming widely adopted to interpret thermodynamic data, this study highlights potential problems with application and interpretation of this type of approach. There is undoubtedly some agreement between predicted and experimentally determined thermodynamic parameters: however, the tolerance of this approach is not sufficient to make it ubiquitously applicable.

Amino Acid Sequence↗

PubMed1998

Are knowledge-based potentials derived from protein structure sets discriminative with respect to amino acid types?

The parametric description of residue environments through solvent accessibility, backbone conformation, or pairwise residue-residue distances is the key to the comparison between amino acid types at protein sequence positions and residue locations in structural templates (condition of protein sequence-structure match). For the first time, the research results presented in this study clarify and allow to quantify, on a rigorous statistical basis, to what extent the amino acid type-specific distributions of commonly used environment parameters are discriminative with respect to the 20 amino acid types. Relying on the Bahadur theory, we estimate the probability of error in a single-sequence-structure alignment based on weak or absent discriminative power in a learning database of protein structure. We present the results for many residue environment variables and demonstrate that each fold description parameter is sensitive with respect to only a few amino acid types while indifferent to most of the other amino acid types. Even complex structural characteristics combining solvent-accessible surface area, backbone conformation, and pairwise distances distinguish only some amino acid types, whereas the others remain nondiscriminated. We find that the knowledge-based potentials currently in use treat especially Ala, Asp, Gln, His, Ser, Thr, and Tyr as essentially "average" amino acids. Thus, highly discriminative amino acid types define the alignment register in gapless sequence-structure alignments. The introduction of gaps leads to alignment ambiguities at sequence positions occupied by nondiscriminated amino acid types. Therefore, local sequence-structure alignments produced by techniques with gaps cannot be reliable. Conceptionally new and more sensitive environment parameters must be invented.

Amino Acids↗

PubMed1981

Changes in the hydrogen exchange kinetics of Escherichia coli aspartate transcarbamylase produced by effector binding and subunit association.

Large changes in solvent accessibility to aspartate transcarbamylase (aspartate carbamoyltransferase, carbamoylphosphate:L-aspartate carbamoyltransferase, EC 2.1.3.2), as monitored by tritium exchange, result from binding of substrates and substrate analogs to the catalytic subunit (c3), binding of nucleoside triphosphates to the regulatory subunit (r2), and subunit association. Rates of exchange are reduced in each of these cases, although to different degrees. Succinate, in the presence of carbamoyl phosphate, retards exchange from c3 no more than carbamoyl phosphate alone, and less than N-phosphonacetyl-L-aspartate, a bisubstrate analog. Larger changes in rates of exchange from r2 are produced by CTP than by ATP; however, both CTP and ATP accelerate exchange from c3 to the same extent. The changes in the kinetics of exchange that result from binding of both substrate analogs and nucleoside triphosphates to the native enzyme (c6r6) are much smaller. Carbamoyl phosphate, with or without succinate, retards exchange only slightly, while the bisubstrate analog has a somewhat larger effect. Experiments with reconstituted enzyme, in which only c3 is tritium labeled, indicate that changes in solvent accessibility produced by active site ligands are largely confined to c3. Neither CTP nor ATP alters the overall rate of exchange from c6r6 significantly. The possibility of opposing changes in the two types of subunits was ruled out in experiments in which only one subunit was labeled. The nonadditive effects of ligation and subunit association imply a set of responsive protons common to both processes and suggest that they are linked not only thermodynamically and functionally but also dynamically.

Adenosine Triphosphate↗

PubMed1998

Conformational and dynamic changes of Yersinia protein tyrosine phosphatase induced by ligand binding and active site mutation and revealed by H/D exchange and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry.

Protein tyrosine phosphatases (PTPase) play important roles in the intracellular signal transduction pathways that regulate cell transformation, growth, and proliferation. Here, solvent accessibility is determined for backbone amide protons from various segments of wild-type Yersinia PTPase in the presence or absence of 220 microM vanadate, a competitive inhibitor, as well as an active site mutant in which the essential cysteine 403 has been replaced by serine (C403S). The method consists of solution-phase H/D exchange, followed by pepsin digestion, high-performance liquid chromatography, and electrospray ionization high-field (9.4 T) Fourier transform ion cyclotron resonance mass spectrometry. Proteolytic segments spanning approximately 93.5% of the primary sequence are analyzed. Binding of vanadate reduces the H/D exchange rate throughout the protein, both for the WpD loop and for numerous other residues that are shielded when that loop is pulled down over the active site on binding of the inhibitor. The single active site C403S mutation reduces solvent access to the WpD loop itself, but opens up the structure in several other segments. Although the 3D structure of the ligand-bound C403S mutant is similar to that of the wild-type PTPase, and the C403S mutant and the wild-type enzyme display similar affinities for vanadate, the thermodynamics for binding of vanadate is different for the two proteins. Collectively, these results establish the flexibility of the WpD loop (previously inferred by comparing PTPase X-ray single-cyrstal diffraction structures in the presence and absence of a tungstate inhibitor), as well as several other signficant changes in segment exposure and/or flexibility that are not evident from X-ray structures.

Amino Acid Sequence↗

PubMed1996

High-resolution crystal structures of two polymorphs of cytochrome c' from the purple phototrophic bacterium rhodobacter capsulatus.

The structures of two polymorphs of cytochrome c' from Rhodobacter capsulatus (RCCP) strain M110 have been determined by the molecular replacement method. Iron anomalous scattering data were used to confirm the molecular replacement solution. The structures were refined at 1.72 angstrom and 2.0 angstrom resolution to R-values of 15.0% and 16.3%, respectively. The RCCP molecule is a dimer and each of the identical 129 residue subunits folds as a four-helical bundle with a covalently bound heme group in the center. This structural motif resembles that of cytochromes c' reported from Rhodospirillum molischianum (RMCP), Rhodospirillum rubrum (RRCP), Chromatium vinosum (CVCP), Achromobacter xyloseoxidans (AXCP) and Alcaligenes denitrificans (ADCP). However, the architecture of the RCCP dimer, that is, the mode of association of subunits, differs substantially from that of the other cytochromes c'. In the RCCP dimer, the subunits are roughly parallel with each other and only helix B of each subunit participates in formation of the dimer interface. Measurement of the solvent-accessible surface area indicates that the dimer interface is smaller in RCCP than in the other cytochromes c'. In RMCP, CVCP, RRCP, AXCP and ADCP the subunits cross each other to form an X shape, and two helices, A and B, of each subunit interact across the dimer interface. These results are consistent with hydrodynamic measurements, which show that there is an equilibrium between monomers and dimer in RCCP, whereas the dimer is the predominant form in the other cytochromes c' for which structures have been determined. Structural comparison of the six cytochromes c' reveal that they can be divided into two groups. In group 1 cytochromes c', CVCP and RCCP, the amino acid sequences and the folding of subunits are arranged in such a way as to allow the formation of a deep channel between helices B and C with direct solvent accessibility to the heme sixth ligand position. There is no such channel in group 2 cytochromes c', RMCP, RRCP, AXCP and ADCP. This may account, in part, for the differences in carbon monoxide binding.

Amino Acid Sequence↗

PubMed1997

Molecular dynamics simulations of the unfolding of barnase in water and 8 M aqueous urea.

Molecular dynamics simulations of barnase have been conducted both in water and in 8 M urea solution for 500 ps at 25 degrees C and for 2000 ps at 85 degrees C. The final structure of the aqueous simulation at room temperature matches closely the structure obtained by NMR and the experimentally observed protections from isotopic exchange. The comparison of the structures generated by the aqueous simulation at 85 degrees C reveals a trajectory composed of groups of geometrically related structures separated by narrow regions of rapid change in structure. The first of these regions displays changes in backbone rmsd to the crystal structure and solvent-accessible area suggestive of a transition state, while the properties observed during the final 300 ps of the simulation are consistent with a stable intermediate. These assignments were confirmed by calculation of the "progress along the reaction coordinate" phi-values using an empirical equation based on a linear response method. The pathway of unfolding defined in this fashion agrees well with the experimental results of site-directed mutagenesis in terms of secondary structure content of the transition state and the intermediate and reproduces the relative stability of the different elements of secondary structure. The results of the simulations in urea suggest a mechanism at the molecular level for its well-known enhancement of the denaturation of proteins. The analysis of radial distribution functions shows that the first solvation shell of the protein is enriched in urea relative to the bulk solvent. The displacement of water molecules allows greater exposure of hydrophobic side chains, as witnessed particularly in the analysis of solvent-accessible surface areas at the higher temperature. Almost all urea molecules in the first shell form at least one hydrogen bond with the protein. They provide a more favorable environment for accommodation of the remaining water molecules, and they facilitate the separation of secondary structure elements by acting as a bridge between groups previously forming intraprotein hydrogen bonds.

Bacterial Proteins↗

PubMed1997

The extended environment of mononuclear metal centers in protein structures.

The objectives of this and the following paper are to identify commonalities and disparities of the extended environment of mononuclear metal sites centering on Cu, Fe, Mn, and Zn. The extended environment of a metal site within a protein embodies at least three layers: the metal core, the ligand group, and the second shell, which is defined here to consist of all residues distant less than 3.5 A from some ligand of the metal core. The ligands and second-shell residues can be characterized in terms of polarity, hydrophobicity, secondary structures, solvent accessibility, hydrogen-bonding interactions, and membership in statistically significant residue clusters of different kinds. Findings include the following: (i) Both histidine ligands of type I copper ions exclusively attach the Ndelta1 nitrogen of the histidine imidazole ring to the metal, whereas histidine ligands for all mononuclear iron ions and nearly all type II copper ions are ligated via the Nepsilon2 nitrogen. By contrast, multinuclear copper centers are coordinated predominantly by histidine Nepsilon2, whereas diiron histidine contacts are predominantly Ndelta1. Explanations in terms of steric differences between Ndelta1 and Nepsilon2 are considered. (ii) Except for blue copper (type I), the second-shell composition favors polar residues. (iii) For blue copper, the second shell generally contains multiple methionine residues, which are elements of a statistically significant histidine-cysteine-methionine cluster. Almost half of the second shell of blue copper consists of solvent-accessible residues, putatively facilitating electron transfer. (iv) Mononuclear copper atoms are never found with acidic carboxylate ligands, whereas single Mn2+ ion ligands are predominantly acidic and the second shell tends to be mostly buried. (v) The extended environment of mononuclear Fe sites often is associated with histidine-tyrosine or histidine-acidic clusters.

Animals↗

PubMed1994

Improved continuum electrostatic modelling in proteins, with comparison to experiment.

Electrostatic interactions in macromolecules can be calculated with the method of finite differences applied to a continuum model. The accuracy of dielectric and counterion continuum modelling has been tested for long-range interactions by comparison with available experimental data over a range of ionic strengths. Various model parameters have been adjusted. Some have little effect, such as protein dielectric and the selection of Van der Waals radii. It is shown that the reduction in interaction due to dielectric effects is overestimated when a dielectric constant of 80 is assigned to all solvent accessible regions. Improved agreement is seen when the effects of the Kirkwood correlation sphere and dielectric saturation are included. Further support for the use of dielectric saturation arises from a correlation of solvent polarization saturation with crystallographic ordered water structure. Calculations over the medium ionic strength range indicate that requiring counterions to maintain a solvent layer places too great a restriction on their approach to the protein-solvent interface. However, counterion accessibility that coincides with the solvent accessible region gives too much interaction damping. Modelling of observed ion binding sites suggests that a counterion response which includes an ion desolvation term, obtained by difference calculation, will improve the computation of ionic strength effects. This study demonstrates that there is scope for improvement in continuum electrostatics calculations, and shows that progress is possible with the inclusion of physically realistic solvent and counterion properties at the protein surface.

Amino Acid Sequence↗

PubMed2003

Probing Ca2+-induced conformational changes in porcine calmodulin by H/D exchange and ESI-MS: effect of cations and ionic strength.

We applied a new method, "protein-ligand interaction using mass spectrometry, titration, and H/D exchange" (PLIMSTEX) [Zhu, M. M. (2003) J. Am. Chem. Soc. 125, 5252-5253], to determine the conformational changes, binding stoichiometry, and binding constants for Ca(2+) interactions with calmodulin (CaM) under varying conditions of electrolyte identity and ionic strength. The outcome shows that CaM becomes less solvent-accessible and more compact upon Ca(2+)-binding, as revealed by the PLIMSTEX curve. The formation of CaM-4Ca species is the biggest contributor to the shape of the titration curve, indicating that the formation of this species accounts for the largest conformational change in the stepwise Ca(2+) binding. The Ca(2+)-binding constants, when comparisons permit, agree with those in the literature within a factor of 3. The binding is influenced by ionic strength and the presence of other cations, although many of these cations do not cause conformational change in apo-CaM. Furthermore, Ca(2+)-saturated CaM exhibits larger protection and higher Ca(2+) affinity in media of low rather than high ionic strength. Both Ca(2+) and Mg(2+) bind to CaM with different affinities, causing different conformational changes. K(+), if it does bind, causes no detectable conformational change, and interactions of Ca(2+) with CaM in the presence of Li(+), Na(+), and K(+) occur with similar affinities and associated changes in solvent accessibility. These metal ion effects point to nonspecific rather than competitive binding of alkali-metal ions. The rates of deuterium uptake by the various CaM-xCa species follow a three-group (fast, intermediate, slow), pseudo-first-order kinetics model. Calcium binding causes the number of amide hydrogens to shift from the fast to the slow group. The results taken together not only provide new insight into CaM but also indicate that both PLIMSTEX and kinetic modeling of H/D exchange data may become general methods for probing protein conformations and quantifying protein-ligand interactions.

Animals↗

PubMed2000

Using O2 to probe membrane immersion depth by 19F NMR.

A fluorinated detergent, CF(3)(CF(2))(5)C(2)H(4)-O-maltose, was reconstituted into a lipid bilayer model membrane system to demonstrate the feasibility of determining solvent accessibility and membrane immersion depth of each fluorinated group by (19)F NMR. Apolar oxygen, which is known to partition with an increasing concentration gradient toward the hydrophobic membrane interior, exhibits a range of paramagnetic relaxation effects on (19)F nuclei, depending on its depth in the membrane. This effect, which is predominately associated with spin-lattice relaxation rates (R(1)) and chemical shifts, can be amplified greatly with minimal line broadening by increasing the partial pressure of O(2) at least 100-fold (i.e., P(O(2)) greater than 20 bar). The differences of longitudinal relaxation rates at 20 bar of oxygen pressure to those under ambient pressure (R(1)(20bar) - R(1)(0)) are largest for those fluorine groups expected to be most deeply buried in the membrane bilayer. This result contrasts with the reverse trend, which is observed on addition of a membrane surface-associated paramagnetic species, 4-(N,N-dimethyl-N-hexadecyl) ammonium-2,2,6,6-tetramethylpiperidine-1-oxyl iodide (CAT-16) at ambient pressures. Thus, differential relaxation rates may be observed in (19)F-labeled membrane-associated molecules resulting from the addition of apolar oxygen under high pressure. The results demonstrate that the degree of solvent accessibility and membrane immersion depth of specific fluorinated species in membrane-associated macromolecules can be probed by (19)F NMR.

Cyclic N-Oxides↗

PubMed2002

Kinetic and magnetic resonance studies of the role of metal ions in the mechanism of Escherichia coli GDP-mannose mannosyl hydrolase, an unusual nudix enzyme.

Escherichia coli GDP-mannose mannosyl hydrolase (GDPMH), a homodimer, catalyzes the hydrolysis of GDP-alpha-D-sugars to yield the beta-D-sugar and GDP by nucleophilic substitution with inversion at the C1' carbon of the sugar [Legler, P. M., Massiah, M. A., Bessman, M. J., and Mildvan, A. S. (2000) Biochemistry 39, 8603-8608]. GDPMH requires a divalent cation for activity such as Mn2+ or Mg2+, which yield similar kcat values of 0.15 and 0.13 s(-1), respectively, at 22 degrees C and pH 7.5. Kinetic analysis of the Mn2+-activated enzyme yielded a K(m) of free Mn2+ of 3.9 +/- 1.3 mM when extrapolated to zero substrate concentration (K(a)Mn2+), which tightened to 0.32 +/- 0.18 mM when extrapolated to infinite substrate concentration (K(m)Mn2+). Similarly, the K(m) of the substrate extrapolated to zero Mn2+ concentration (K(S)(GDPmann) = 1.9 +/- 0.5 mM) and to infinite Mn2+ concentration (K(m)(GDPmann) = 0.16 +/- 0.09 mM) showed an order of magnitude decrease at saturating Mn2+. Such mutual tightening of metal and substrate binding suggests the formation of an enzyme-metal-substrate bridge complex. Direct Mn2+ binding studies, monitoring the concentration of free Mn2+ by EPR and of bound Mn2+ by its enhanced paramagnetic effect on the longitudinal relaxation rate of water protons (PRR), detected three Mn2+ binding sites per enzyme monomer with an average dissociation constant (K(D)) of 3.2 +/- 1.0 mM, in agreement with the kinetically determined K(a)Mn2+. The enhancement factor (epsilon(b)) of 11.5 +/- 1.2 indicates solvent access to the enzyme-bound Mn2+ ions. No cross relaxation was detected among the three bound Mn2+ ions, suggesting them to be separated by at least 10 A. Such studies also yielded a weak dissociation constant for the binary Mn2+-GDP-mannose complex (K1 = 6.5 +/- 1.0 mM) which significantly exceeded the kinetically determined K(m) values of Mn2+, indicating the true substrate to be GDP-mannose rather than its Mn2+ complex. Substrate binding monitored by changes in 1H-15N HSQC spectra yielded a dissociation constant for the binary E-GDP-mannose complex (K(S)(GDPmann)) of 4.0 +/- 0.5 mM, comparable to the kinetically determined K(S) value (1.9 +/- 0.5 mM). To clarify the metal stoichiometry at the active site, product inhibition by GDP, a potent competitive inhibitor (K(I) = 46 +/- 27 microM), was studied. Binding studies revealed a weak, binary E-GDP complex (K(D)(GDP) = 9.4 +/- 3.2 mM) which tightened approximately 500-fold in the presence of Mn2+ to yield a ternary E-Mn2+-GDP complex with a dissociation constant, K3(GDP) = 18 +/- 9 microM, which overlaps with the K(I)(GDP). The tight binding of Mn2+ to 0.7 +/- 0.2 site per enzyme subunit in the ternary E-Mn2+-GDP complex (K(A)' = 15 microM) and the tight binding of GDP to 0.8 +/- 0.1 site per enzyme subunit in the ternary E-Mg2+-GDP complex (K3 < 0.5 mM) indicate a stoichiometry close to 1:1:1 at the active site. The decrease in the enhancement factor of the ternary E-Mn2+-GDP complex (epsilon(T) = 4.9 +/- 0.4) indicates decreased solvent access to the active site Mn2+, consistent with an E-Mn2+-GDP bridge complex. Fermi contact splitting (4.3 +/- 0.2 MHz) of the phosphorus signal in the ESEEM spectrum established the formation of an inner sphere E-Mn2+-GDP complex. The number of water molecules coordinated to Mn2+ in this ternary complex was determined by ESEEM studies in D2O to be two fewer than on the average Mn2+ in the binary E-Mn2+ complexes, consistent with bidentate coordination of enzyme-bound Mn2+ by GDP. Kinetic, metal binding, and GDP binding studies with Mg2+ yielded dissociation constants similar to those found with Mn2+. Hence, GDPMH requires one divalent cation per active site to promote catalysis by facilitating the departure of the GDP leaving group, unlike its homologues the MutT pyrophosphohydrolase, which requires two, or Ap4A pyrophosphatase, which requires three.

Amino Acid Sequence↗

PubMed2000

Cysteine-scanning mutagenesis of transmembrane segment 11 of the GLUT1 facilitative glucose transporter.

The glucose permeation pathway within the GLUT1 facilitative glucose transporter is hypothesized to be formed by the juxtaposition of the hydrophilic faces of several transmembrane alpha-helices. The role of transmembrane segment 11 in forming a portion of this central aqueous channel was investigated using cysteine-scanning mutagenesis in conjunction with sulfhydryl-directed chemical modification. Each of the amino acid residues within transmembrane segment 11 were individually mutated to cysteine in an engineered GLUT1 molecule devoid of all native cysteines (C-less). Measurement of 2-deoxyglucose uptake in a Xenopus oocyte expression system revealed that all of these mutants retain measurable transport activity. Four of the cysteine mutants (N411, W412, N415, and F422) had significantly reduced specific activity relative to the C-less protein. Specific activity was increased in five of the mutants (A402, A405, V406, F416, and M420). The solvent accessibility and relative orientation of the residues to the glucose permeation pathway were investigated by determining the sensitivity of the mutant transporters to inhibition by the sulfhydryl-directed reagent p-chloromercuribenzenesulfonate (pCMBS). Cysteine replacement at five positions (I404, G408, F416, G419, and M420) produced transporters that were inhibited by incubation with extracellular pCMBS. All of these residues cluster along a single face of the alpha-helix within the regions showing altered specific activities. These data demonstrate that the exofacial portion of transmembrane segment 11 is accessible to the external solvent and provide evidence for the positioning of this alpha-helix within or near the glucose permeation pathway.

4-Chloromercuribenzenesulfonate↗

PubMed1998

Uncovering a calcium-regulated membrane-binding mechanism for soybean lipoxygenase-1.

Lipoxygenases catalyze the biosynthesis of leukotrienes, lipoxins, and other lipid-derived mediators that are involved in a wide variety of pathophysiological processes, including inflammation, allergy, and tumorigenesis. Mammalian lipoxygenases are activated by a calcium-mediated translocation to intracellular membranes upon cell stimulation, and cooperate with cytosolic phospholipase A2 at the membrane surface to generate eicosanoids. Although it has been documented that plant cell stimulation increases intracellular Ca2+ concentration and activates cytosolic phospholipase A2, followed by lipoxygenase-catalyzed conversion of the liberated linolenic acid to jasmonic acid, no evidence is available for Ca2+-regulated membrane binding and activity of plant lipoxygenases. Plant lipoxygenases, unlike their mammalian counterparts, are believed to function independently of calcium or membranes. Here we present spectroscopic evidence for a calcium-regulated membrane-binding mechanism of soybean lipoxygenase-1 (L-1). Both calcium and membrane binding affect the structure and the mode of action of L-1. Free L-1 in solution is less accessible to the polar solvent and converts linoleic acid to conjugated dienes, whereas surface binding increases solvent accessibility and stimulates conjugated ketodiene production. Calcium exerts a biphasic effect on the structure and activity of L-1. Our results uncover a new regulatory mechanism for plant lipoxygenases and delineate common features in animal and plant cell signaling pathways.

Adsorption↗

PubMed1999

Cysteine-scanning mutagenesis of transmembrane segment 7 of the GLUT1 glucose transporter.

The human erythrocyte facilitative glucose transporter (Glut1) is predicted to contain 12 transmembrane spanning alpha-helices based upon hydropathy plot analysis of the primary sequence. Five of these helices (3, 5, 7, 8, and 11) are capable of forming amphipathic structures. A model of GLUT1 tertiary structure has therefore been proposed in which the hydrophilic faces of several amphipathic helices are arranged to form a central aqueous channel through which glucose traverses the hydrophobic lipid bilayer. In order to test this model, we individually mutated each of the amino acid residues in transmembrane segment 7 to cysteine in an engineered GLUT1 molecule devoid of all native cysteines (C-less). Measurement of 2-deoxyglucose uptake in a Xenopus oocyte expression system revealed that nearly all of these mutants retain measurable transport activity. Over one-half of the cysteine mutants had significantly reduced specific activity relative to the C-less protein. The solvent accessibility and relative orientation of the residues within the helix was investigated by determining the sensitivity of the mutant transporters to inhibition by the sulfhydryl directed reagent p-chloromercuribenzene sulfonate (pCMBS). Cysteine replacement at six positions (Gln(282), Gln(283), Ile(287), Ala(289), Val(290), and Phe(291)), all near the exofacial side of the cell membrane, produced transporters that were inhibited by incubation with extracellular pCMBS. Residues predicted to be near the cytoplasmic side of the cell membrane were minimally affected by pCMBS. These data demonstrate that the exofacial portion of transmembrane segment 7 is accessible to the external solvent and provide evidence for the positioning of this alpha-helix within the glucose permeation pathway.

Animals↗

PubMed2006

Probing the conformation of the prion protein within a single amyloid fibril using a novel immunoconformational assay.

The coexistence of multiple strains or subtypes of the disease-related isoform of prion protein (PrP) in natural isolates, together with the observed conformational heterogeneity of PrP amyloid fibrils generated in vitro, indicates the importance of probing the conformation of single particles within heterogeneous samples. Using an array of PrP-specific antibodies, we report the development of a novel immunoconformational assay. Uniquely, application of this new technology allows the conformation of multimeric PrP within a single fibril or particle to be probed without pretreatment of the sample with proteinase K. Using amyloid fibrils prepared from full-length recombinant PrP, we demonstrated the utility of this assay to define (i) PrP regions that are surface-exposed or buried, (ii) the susceptibility of defined PrP regions to GdnHCl-induced denaturation, and (iii) the conformational heterogeneity of PrP fibrils as measured for either the entire fibrillar population or for individual fibrils. Specifically, PrP regions 159-174 and 224-230 were shown to be buried and were the most resistant to denaturation. The 132-156 segment of PrP was found to be cryptic under native conditions and solvent-exposed under partially denaturing conditions, whereas the region 95-105 was solvent-accessible regardless of the solvent conditions. Remarkably, a subfraction of fibrils showed immunoreactivity to PrPSc-specific antibodies designated as IgGs 89-112 and 136-158. The immunoreactivity of the conformational epitopes was reduced upon exposure to partially denaturing conditions. Unexpectedly, PrPSc -specific antibodies revealed conformational polymorphisms even within individual fibrils. Our studies provide valuable new insight into fibrillar substructure and offer a new tool for probing the conformation of single PrP fibrils.

Amyloid↗

PubMed1993

Effects of glycosylation on protein structure and dynamics in ribonuclease B and some of its individual glycoforms.

In an attempt to elucidate the role of carbohydrates on protein structure and dynamics in glycoproteins, ribonuclease B (RNase B), containing a single glycosylation site at Asn34, has been investigated and compared with the enzyme in the unglycosylated form (RNase A). RNase B consists of five glycoforms: Man5GlcNAc2, Man6GlcNAc2, Man7GlcNAc2, Man8GlcNAc2 and Man9GlcNAc2 (Man5-9GlcNAc2). The individual glycoforms Man1GlcNAc2 (synthetic) and Man5GlcNAc2 of RNase B have been studied to ascertain any specific effects of the different oligosaccharides. NMR measurement of amide-proton/deuterium exchange rates shows that glycosylation of the enzyme leads to the protection of amide-proton resonances from solvent exchange for a large number of residues, both in the vicinity of the glycosylation site (e.g. residues 29-34 and 35) and remote from it (e.g. residues 57-61 and 75-76). In addition, residues 10-13, 32, 34 and 35, which are observed to be protected from exchange as a result of glycosylation in the individual glycoforms Man1Glc-NAc2-RNase and Man5GlcNAc2-RNase (when compared with RNase A) are less protected in RNase B. This additional protection in the glycoforms Man1GlcNAc2-RNase and Man5GlcNAc2-RNase may arise from steric hindrance between the oligosaccharide and protein reducing solvent accessibility. The rates of solvent exchange of amide protons for residues 10-13, 32, 34 and 35 are dependent on the oligosaccharide moiety. The average amide-proton/deuterium exchange rate in Man6-9Glc-NAc2-ribonucleases for residues 10-13 and 35 is approximately three times greater than Man5Glc-NAc2-ribonuclease, while for residues 32 and 34 it is approximately 7-11 times greater. CD analysis of RNase A and RNase B revealed the carbohydrate moiety to have a small stabilizing effect (approximately 5 kJ/mol) on the protein.

Carbohydrate Sequence↗

PubMed2005

Sequence homology: a poor predictive value for profilins cross-reactivity.

BACKGROUND: Profilins are highly cross-reactive allergens which bind IgE antibodies of almost 20% of plant-allergic patients. This study is aimed at investigating cross-reactivity of melon profilin with other plant profilins and the role of the linear and conformational epitopes in human IgE cross-reactivity. METHODS: Seventeen patients with melon allergy were selected based on clinical history and a positive skin prick test to melon extract. Melon profilin has been cloned and expressed in E. coli. The IgE binding and cross-reactivity of the recombinant profilin were measured by ELISA and inhibition ELISA. The amino acid sequence of melon profilin was compared with other profilin sequences. A combination of chemical cleavage and immunoblotting techniques were used to define the role of conformational and linear epitopes in IgE binding. Comparative modeling was used to construct three-dimensional models of profilins and to assess theoretical impact of amino acid differences on conformational structure. RESULTS: Profilin was identified as a major IgE-binding component of melon. Alignment of amino acid sequences of melon profilin with other profilins showed the most identity with watermelon profilin. This melon profilin showed substantial cross-reactivity with the tomato, peach, grape and Cynodon dactylon (Bermuda grass) pollen profilins. Cantaloupe, watermelon, banana and Poa pratensis (Kentucky blue grass) displayed no notable inhibition. Our experiments also indicated human IgE only react with complete melon profilin. Immunoblotting analysis with rabbit polyclonal antibody shows the reaction of the antibody to the fragmented and complete melon profilin. Although, the well-known linear epitope of profilins were identical in melon and watermelon, comparison of three-dimensional models of watermelon and melon profilins indicated amino acid differences influence the electric potential and accessibility of the solvent-accessible surface of profilins that may markedly affect conformational epitopes. CONCLUSION: Human IgE reactivity to melon profilin strongly depends on the highly conserved conformational structure, rather than a high degree of amino acid sequence identity or even linear epitopes identity.

Journal Article↗

PubMed2025

DescribePROT Database of Residue-Level Protein Structure and Function Annotations.

DescribePROT is a freely available online database of structural and functional descriptors of proteins at the amino acid level. It provides access to 13 diverse descriptors that include sequence conservation, putative secondary structure, solvent accessibility, intrinsic disorder, and signal peptides, and putative annotations of residues that interact with proteins, peptides and nucleic acids. These data can be used to elucidate protein functions, to support efforts to develop therapeutics, and to develop and evaluate future predictors of protein structure and function. DescribePROT includes 7.8 billion predictions for 1.4 million proteins from 83 complete proteomes of popular model organisms. This information can be downloaded at multiple levels of scope (entire database, specific organisms, and individual proteins) and can be interacted with using a graphical interface that simultaneously displays data on multiple descriptors. We describe the contents of this resource, provide directions on how to use its interface, and offer instructions on how to obtain and interact with the underlying data. Moreover, we briefly discuss plans for a future expansion of this database. DescribePROT is available at http://biomine.cs.vcu.edu/servers/DESCRIBEPROT/ .

Databases, Protein↗