PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tungsten Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

Molybdate binding by ModA, the periplasmic component of the Escherichia coli mod molybdate transport system.

ModA, the periplasmic-binding protein of the Escherichia coli mod transport system was overexpressed and purified. Binding of molybdate and tungstate to ModA was found to modify the UV absorption and fluorescence emission spectra of the protein. Titration of these changes showed that ModA binds molybdate and tungstate in a 1:1 molar ratio. ModA showed an intrinsic fluorescence emission spectrum attributable to its three tryptophanyl residues. Molybdate binding caused a conformational change in the protein characterized by: (i) a shift of tryptophanyl groups to a more hydrophobic environment; (ii) a quenching (at pH 5.0) or enhancement (at pH 7.8) of fluorescence; and (iii) a higher availability of tryptophanyl groups to the polar quencher acrylamide. The tight binding of molybdate did not allow an accurate estimation of the binding constants by these indirect methods. An isotopic binding method with 99MoO42- was used for accurate determination of KD (20 nM) and stoichiometry (1:1 molar ratio). ModA bound tungstate with approximately the same affinity, but did not bind sulfate or phosphate. These KDs are 150- to 250-fold lower than those previously reported, and compatible with the high molybdate transport affinity of the mod system. The affinity of ModA for molybdate was also determined in vivo and found to be similar to that determined in vitro.

Bacterial Proteins↗

Validation of an inductively coupled plasma-mass spectrometry method to quantify tungsten in human plasma. Determination of percentage binding to plasma proteins.

BACKGROUND: The aim of this paper was to validate an inductively coupled plasma-mass spectrometry (ICP-MS) method to quantify tungsten in human plasma and to study its percentage binding to plasma proteins. METHODS: This method was validated with respect to accuracy, precision, selectivity and limits of quantification and of detection according to Good Laboratory Practice Guidelines. Calibration curves were obtained in the range 10-500 ng/ml. The extent of plasma protein binding was determined by ultrafiltration in the range 40-2000 ng/ml. RESULTS: A significant matrix effect was observed. The linearity of this method was statistically proven. Precision ranged from 0.76% to 6.49%, and accuracy from 97% to 102%. The lower limit of quantification (LLOQ) was 10 ng/ml. The mean percentage of unbound fraction was 89%. CONCLUSIONS: The results obtained indicate that the method described fulfills the accuracy and precision requirements necessary to carry out pharmacokinetic studies in man.

Blood Proteins↗

In vitro cytotoxic effects of cobalt-containing dusts on mouse peritoneal and rat alveolar macrophages.

"Hard metal disease" is a chronic lung disease characterized by the presence of interstitial fibrosis; the role of cobalt in the development of this entity is still debated. Indeed, most cases have been observed in some workplaces (grinding) of the hard metal industry and in the diamond polishing industry whereas no similar cases have been reported from workers exposed to pure cobalt powders in cobalt refineries. This study was designed to assess the in vitro toxicity (LDH release, morphology) of different cobalt-containing dusts toward murine peritoneal and alveolar macrophages. The results clearly demonstrate that, both in terms of dust particle and cobalt concentrations, the reactivity of the tungsten carbide-cobalt mixture is quite different from that of cobalt metal powder. The ground tungsten carbide-cobalt mixture prepared by the hard metal industry is almost as toxic as crystalline silica whereas, when tested separately, tungsten carbide has no effect and pure cobalt metal powder slightly impairs cell viability. The uptake of cobalt by macrophages in the presence of tungsten carbide was found to be increased. These observations may have some practical implications in industrial hygiene; they suggest that the acceptable exposure level to cobalt metal should be different when handled alone or in association with other powders such as tungsten carbide.

Animals↗

Distribution of tungstate in pregnant mice and effects on embryonic cells in vitro.

Whole-body autoradiography and impulse counting experiments were used to study the distribution and retention of radioactivity in the pregnant mouse after administration of [185W]tungstate. A rapid uptake was found in a number of tissues--skeleton, red pulp of the spleen, adrenal, liver, thyroid, pituitary, and ovary--and in the intestine and kidneys, through which it was rapidly excreted. 185W was also readily transported from mother to fetus, although more in late than in early gestation. The largest metal retention was found in the maternal skeleton, kidneys, and spleen and in the visceral yolk sac epithelium and the skeleton of the fetus. Furthermore, in vitro cytotoxicity experiments showed inhibition by tungstate of cartilage production in limb bud mesenchymal cultures at concentrations similar to those found in vivo.

Animals↗

Effects of sodium tungstate on insulin and glucagon secretion in the perfused rat pancreas.

Both the direct effect of sodium tungstate on insulin and glucagon secretion in the perfused rat pancreas, and the insulin response to glucose and arginine in pancreases isolated from tungstate-pretreated rats were studied. Infusion of tungstate stimulated insulin output in a dose-dependent manner. The insulinotropic effect of tungstate was observed at normal (5.5 mM), and moderately high (9 mM) glucose concentrations, but not at a low glucose concentration (3.2 mM). Tungstate-induced insulin output was blocked by diazoxide, somatostatin, and amylin, suggesting several targets for tungstate at the B-cell secretory machinery. Glucagon release was not modified by tungstate. Pancreases from chronically tungstate-treated rats showed an enhanced response to glucose but not to arginine. Our results indicate that the reported reduction of glycemia caused by tungstate administration is, at least in part, due to its direct insulinotropic activity. Furthermore, chronic tungstate treatment may prime the B-cell, leading to over-response to a glucose stimulus.

Amyloid↗

Modulation of glucose transporters in rat diaphragm by sodium tungstate.

Oral administration of sodium tungstate is an effective treatment for diabetes in animal models. We examined the effects of 6 weeks of oral administration of tungstate on glucose transporters (GLUT) in streptozotocin-induced diabetic rat diaphragm. Diabetes decreased GLUT4 expression while tungstate treatment normalized not only GLUT4 protein but also GLUT4 mRNA in the diabetic rats. Furthermore, treatment increased GLUT4 protein in plasma and internal membranes, suggesting a stimulation of its translocation to the plasma membrane. Tungstate had no effect on healthy animals. There were no differences in the total amount of GLUT1 transporter in any group. We conclude that the normoglycemic effect of tungstate may be partly due to a normalization of the levels and subcellular localization of GLUT4, which should result in an increase in muscle glucose uptake.

Animals↗

The Chlamydomonas reinhardtii MoCo carrier protein is multimeric and stabilizes molybdopterin cofactor in a molybdate charged form.

In Chlamydomonas reinhardtii, molybdopterin cofactor (MoCo) able to reconstitute active nitrate reductase (NR) with apoenzyme from the Neurospora crassa mutant nit-1 was found mostly bound to a carrier protein (CP). This protein is scarce in the algal free extracts and has been purified 520-fold. MoCoCP is a protein of 64 kDa with subunits of 16.5 kDa and an isoelectric point of 4.5. In contrast to free MoCo, MoCo bound to CP was remarkably protected against inactivation under both aerobic conditions and basic pH. MocoCP transferred active MoCo to apoNR in vitro without addition of molybdate, though reconstituted activity was 20% higher in the presence of molybdate. Incubation with tungstate specifically inhibited MoCoCP activity but had no effect on the activity of free MoCo released from milk xanthine oxidase. MoCoCP did not charge molybdate unless in the presence of N. crassa extracts. Our data support that MoCoCP stabilizes MoCo in an active form charged with molybdate to provide MoCo to apomolybdoenzymes.

Animals↗

Simple spectrophotometric determination of acyclovir in bulk drug and formulations.

A simple and cost effective spectrophotometric method is described for the determination of acyclovir in bulk drug and in formulations. The method is based on the formation of blue coloured chromogen when the drug reacts with Folin-Ciocalteu (F-C) reagent in alkaline medium. The coloured species has an absorption maximum at 760 nm and obeys Beer's law in the concentration range 50-450 microg ml(-1). The absorbance was found to increase linearly with increasing concentration of acyclovir, which is corroborated by the calculated correlation coefficient value of 0.9998 (n = 9). The apparent molar absorptivity and Sandell sensitivity were 1.65 x 10(2) l mol(-1) cm(-1) and 1.36 microg cm(-2), respectively. The slope and intercept of the equation of the regression line are 6.87 x 10(-4) and 8.33 x 10(-3), respectively. The limit of detection was 5.68 microg ml(-1) and the limit of quantification was 18.95 microg ml(-1). The proposed method was successfully applied to the determination of acyclovir in pharmaceutical formulations. The reliability of the assay method was established by parallel determination by standard-addition method, and by recovery studies. The results demonstrated and the procedure is at least as accurate, precise and reproducible (RSD < 2%) as the official method, while being simple and less time consuming. A statistical analysis indicated that there was no significant difference between the results obtained by the proposed procedure and those of the official method.

Acyclovir↗

Gas chromatographic analysis of trace gas impurities in tungsten hexafluoride.

Highly reactive fluorinated gaseous matrices require special equipment and techniques for the gas chromatographic analysis of trace impurities in these gases. The impurities that were analysed at the low-microg/l levels included oxygen, nitrogen, carbon dioxide, carbon monoxide, sulfur hexafluoride and hydrogen. This paper describes the use of a system utilising backflush column switching to protect the columns and detectors in the analysis of trace gas impurities in tungsten hexafluoride. Two separate channels were used for the analysis of H2, O2, N2, CO, CO2 and SF6 impurities with pulsed discharge helium ionisation detection.

Calibration↗

Insights into substrate binding and catalytic mechanism of human tyrosyl-DNA phosphodiesterase (Tdp1) from vanadate and tungstate-inhibited structures.

Tyrosyl-DNA phosphodiesterase (Tdp1) is a DNA repair enzyme that catalyzes the hydrolysis of a phosphodiester bond between a tyrosine residue and a DNA 3'-phosphate. The only known example of such a linkage in eukaryotic cells occurs normally as a transient link between a type IB topoisomerase and DNA. Thus human Tdp1 is thought to be responsible for repairing lesions that occur when topoisomerase I becomes stalled on the DNA in the cell. Tdp1 has also been shown to remove glycolate from single-stranded DNA containing a 3'-phosphoglycolate, suggesting a role for Tdp1 in repair of free-radical mediated DNA double-strand breaks. We report the three-dimensional structures of human Tdp1 bound to the phosphate transition state analogs vanadate and tungstate. Each structure shows the inhibitor covalently bound to His263, confirming that this residue is the nucleophile in the first step of the catalytic reaction. Vanadate in the Tdp1-vanadate structure has a trigonal bipyramidal geometry that mimics the transition state for hydrolysis of a phosphodiester bond, while Tdp1-tungstate displays unusual octahedral coordination. The presence of low-occupancy tungstate molecules along the narrow groove of the substrate binding cleft is suggestive evidence that this groove binds ssDNA. In both cases, glycerol from the cryoprotectant solution became liganded to the vanadate or tungstate inhibitor molecules in a bidentate 1,2-diol fashion. These structural models allow predictions to be made regarding the specific binding mode of the substrate and the mechanism of catalysis.

Apoenzymes↗

Divalent cation sites in tomato bushy stunt virus. Difference maps at 2-9 A resolution.

Difference electron density maps, using as few as four 1/2 degrees oscillation photographs, have been computed for tomato bushy stunt virus crystals soaked in EDTA. GdCl3 and silicotungstate. The maps define a double divalent cation site, responsible for regulating expansion of the virus particle, as well as sites for binding tungstate anions.

Binding Sites↗

Surface roughness of dentin after tooth preparation with different rotary instrumentation.

Although surface finish can be a critical variable in clinical performance, there is a dearth of information regarding surface characteristics of teeth prepared for artificial crowns. This study characterized teeth prepared for complete cast restorations using three representative types of rotary instruments. One hundred and five standardized tooth preparations for complete crowns were performed using a modified milling machine on extracted human teeth with diamond, tungsten carbide, and tungsten carbide finishing burs of similar shape (n = 35). The prepared dentin was analyzed with a surface profilometer and a scanning electron microscope (SEM). Differences between rotary instrument groups were determined with parametric ANOVA and Tukey's Studentized Range (HSD). Statistically significant differences in the surface topography of prepared teeth were open. Mean surface roughnesses (Ra) were 8.6 and 6.8 mum for teeth prepared with diamond and tungsten carbide burs. Teeth completed with finishing burs appeared to result in a smoother surface (1.2 mum).

Analysis of Variance↗

Xanthine oxidase inactivation attenuates postocclusion shock after descending thoracic aorta occlusion and reperfusion in rabbits.

"Declamping shock" is observed after aortic crossclamping, with hypovolemia, hypotension, and metabolic acidemia invariably present. We hypothesized that oxidants derived from xanthine oxidase influence the resuscitative interventions required to maintain baseline hemodynamic and acid-base status after aortic occlusion and reperfusion in rabbits. We also hypothesized that inactivation of xanthine oxidase with sodium tungstate could reduce systemic injury as assessed by the release of lactate dehydrogenase and alkaline phosphatase. To test these hypotheses, we established aortic occlusion in rabbits (n = 10, standard diet; n = 8, tungstate diet) for 40 minutes by inflation of a 4F Fogarty catheter in the descending thoracic aorta followed by 2 hours of reperfusion. Sham-operated rabbits (n = 10, standard diet; n = 9, tungstate diet) served as controls. Tungstate-pretreated rabbits required significantly less Ringer's solution (28%), phenylephrine (68%), and sodium bicarbonate (30%) during reperfusion (p < 0.005). Lactate dehydrogenase and alkaline phosphatase release during reperfusion was significantly attenuated by tungstate pretreatment (p < 0.05). Tungstate pretreatment resulted in plasma xanthine oxidase activities significantly lower than those in the sham group administered a standard diet (p = 0.007). Resuscitation requirements and systemic injury were reduced by inactivation of xanthine oxidase in a rabbit model that simulates the situation of human thoracic aorta operations.

Acid-Base Equilibrium↗

Photocatalytic degradation of textile dye X3B by heteropolyoxometalate acids.

Reactive brilliant red X3B, one recalcitrant textile dye, was decolorized in water by (Photo)-Fenton reactions and TiO(2) photocatalysis [Chemosphere 43 (2001) 1103]. Complementary to this study, the present work has shown the effectiveness of several Keggin-type heteropolyoxomatalates (POM) as a photocatalyst for X3B degradation in water at pH 1.0 under UV light (lambda>/=320 nm) irradiation. Among four POMs, the relative activity was observed to be H(3)PW(12)O(40)z.Gt;H(4)SiW(12)O(40)>H(4)GeW(12)O(40)>H(3)PMo(12)O(40). The reaction was dependent of pH, light intensity and the catalyst loading, but not obviously of the molecular oxygen dissolved in water. Compared to the photocatalyst of TiO(2) (Degussa p25), H(3)PW(12)O(40) was less efficient for the dye bleaching and mineralization. The mechanism study reveals that hydroxyl radicals are involved in the degradation of X3B (and Rhodamine B) by POM photocatalysis.

Catalysis↗

The use of tungsten carbide needle holders to remove intracanal objects.

The removal of metallic filling materials and posts is necessary before endodontic retreatment. Retreatment in such cases can require considerable time and effort. This article presents a technique to facilitate the removal of metallic obstructions from root canals using tungsten carbide needle holders. Clinical cases demonstrate the effectiveness of this technique.

Adult↗

Cutting effectiveness and wear of carbide burs on eight machinable ceramics and bovine dentin.

As a first approach in evaluating the feasibility of industrial machinable ceramics in dentistry, we performed weight-load-cutting tests on eight machinable ceramics and bovine dentin, using #1557 carbide burs driven by an air-turbine handpiece. While the transverse load applied to the bur was cyclically varied between 20 and 80 g, we measured the cutting speed (i.e., the steady-state handpiece speed during cutting) and the cutting volume. The greater the applied load, the more the cutting speed decreased and the cutting volume increased. The degree of this trend, however, differed among the workpieces. When dentin and mica-based glass ceramics were being cut, the cutting speed was moderately reduced, the cutting effectiveness of the bur remained high, and the wear of the bur was small. When other ceramics--such as AIN-based, Si3N4-based, and CaO.SiO2-based ceramics--were being cut, however, the cutting speed was less diminished, and the cutting efficiency of the bur was smaller and decreased rapidly, along with extensive wear of the bur. We speculate that mica-based glass ceramics could be used as the substitute for dentin in the pre-clinical cutting exercise, and that another potential use of machinable ceramics examined might be in the production of future machined dental prostheses.

Animals↗