PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “surface modification”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
PubMed2004

Chemical surface modification of poly(p-xylylene) thin films.

Electrophilic aromatic substitution reactions were studied at poly(p-xylylene) (PPX) film surface-reaction medium interfaces. The extent of the reactions (depth of penetration and degree of substitution) was determined by the interaction of the polymer with the reaction solution. Reaction with chlorosulfonic acid to produce sulfonyl chloride and sulfone functionalities occurred readily in the bulk of PPX, and yields were sensitive to time and temperature. Confinement of this reaction to the PPX surface was achieved by controlling the concentration of the acid. Functionalization of PPX with N-methylol-2-chloroacetamide in sulfuric acid to produce the chloroamidomethylated derivative occurred in high yield and was confined to the surface region of PPX. Hydrolysis of the amide to generate aminomethylated PPX was assessed by XPS and a derivatization reaction. Friedel-Crafts type chemistry (acylation and alkylation reactions) also produced functionalized surfaces, but with lower degrees of substitution than the other two reactions and was strictly surface-confined.

Membranes, Artificial↗
PubMed2004

Porous Ti-6Al-4V alloy fabricated by spark plasma sintering for biomimetic surface modification.

Porous compacts with both biological and biomechanical compatibilities and high strength were developed. Spherical powders of Ti-6Al-4V alloy, which were either as received or surface modified with the use of calcium ions by hydrothermal treatment (HTT), were fabricated by a spark plasma sintering process. The porous compacts of pure Ti were used as reference materials. Porosity was approximately 30%, and compressive strengths were 113 and 125 MPa for the as-received Ti alloy powders and those modified by the HTT process, respectively. The bending strength and elastic modulus of as-received Ti alloy powders were 128-178 MPa and 16-18 GPa, respectively. Each of the compacts was immersed in simulated body fluid (SBF). The amount of adsorption/precipitation of calcium phosphate through the compacts was measured by weight change and was observed by SEM. The compacts were covered with calcium phosphate after 2 weeks of immersion in SBF. The compacts of Ti alloy had plenty of precipitated apatite crystals, and modification by HTT accumulated more precipitation. Because calcium phosphate is a mineral component of bone, apatite, which is precipitated on the surface of the compacts, could adsorb proteins and/or drugs such as antibiotics. It is expected that a large amount of proteins and/or drugs could be impregnated when the porous compacts developed are used.

Alloys↗
PubMed2006

[Surface modification and microstructure of single-walled carbon nanotubes for dental composite resin].

In order to improve its dispersion condition in dental composite resin and enhance its interaction with the matrix, single-walled carbon nanotubes(SWNTs) were refluxed and oxidized, then treated by APTE. Their outer surface were coated by nano-SiO2 particles using sol-gel process, then further treated by organosilanes ATES. IR and TEM were used to analyze modification results. TEM pictures showed nano-particles were on the surface of SWNTs; IR showed characteristic adsorbing bands of SiO2. Composite resin specimen with modified SWNTs was prepared and examined by TEM. SWNTs were detected in composite resin matrix among other inorganic fillers.

Composite Resins↗
PubMed2005

Surface modification of biodegradable polyesters with fatty acid conjugates for improved drug targeting.

We describe a general method for incorporating target ligands into the surface of biocompatible polyester poly(lactic-co-glycolic acid) (PLGA) 50/50 materials using fatty acids. Avidin-fatty acid conjugates were prepared and efficiently incorporated into PLGA. Avidin was chosen as an adaptor protein to facilitate the attachment of a variety of biotinylated ligands. We show that fatty acid preferentially associates with the hydrophobic PLGA matrix, rather than the external aqueous environment, facilitating a prolonged presentation of avidin over several weeks. We successfully applied this approach in both microspheres encapsulating a model protein, bovine serum albumin, and PLGA scaffolds fabricated by a salt-leaching method. Because of its ease, generality and flexibility, this strategy promises widespread utility in modifying the surface of PLGA-based materials for applications in drug delivery and tissue engineering.

Absorbable Implants↗
PubMed2004

Outer surface modification of synthetic multifunctional pores.

The characteristics of pores formed by p-octiphenyl beta-barrels with LWV triads at the outer surface are reported in comparison with the conventional rigid-rod beta-barrels with all-L outer surface. Maintained multifunctionality of tetrameric pores with external LWV triads (inversion of ion selectivity, molecular recognition and transformation) is implicative for intact barrel interior. Increased pore activity supports dominance of high bilayer affinity for W over low affinity for V. Transmembrane p-octiphenyl orientation (from fluorescence depth quenching) supports barrel-stave (rather than toroidal) pores and dominance of transmembrane preference of rigid rods over interfacial preference of W. Destabilization of beta-barrel pores in membranes (from short single-channel lifetimes) and in the media (from 4th-power dependence on monomer concentration) by LWV triads supports dominance of low beta-propensity for W over high beta-propensity for V. The relation between the stability of supramolecular (pre)pores and dependence of activity on monomer concentration is discussed in a more general context.

Ion Channels↗
PubMed2006

Chemical surface modification of high-strength porous Ti compacts by spark plasma sintering.

The biological properties of a titanium (Ti) implant depend on its surface oxide film. The aims of the present study were to increase the specific surface oxide area on Ti using a porous structure and to study the relationship between the amount of apatite coating in simulated body fluid (SBF) and the actual surface area on titanium powders. Ti powders of 110 microm average diameter were sintered by spark plasma sintering. The sintered compacts had a porosity of 28%, a compressive elastic modulus of 7.9 GPa and an ultimate strength of 112 MPa. The compressive strength of the compacts was increased to 588 MPa by subsequent annealing in a vacuum furnace at 1000 degrees C for 24 h. The sintered compacts were treated with aqueous NaOH solution and subsequently heated at 600 degrees C. The pretreated compacts showed apatite crystal precipitation in SBF. The amounts of precipitates through the compacts were compared with those of the Ti plate substrates subjected to the same chemical pretreatment. It was confirmed that the amounts of precipitates through the compacts were more than one hundred times higher than those on the Ti plates. It was concluded that the metal porous compacts developed may be used as functional materials for immobilizing functional proteins and/or drugs, because the precipitated apatite can adsorbed these substances.

Apatites↗
PubMed1996

Fabrication and selective surface modification of 3-dimensionally textured biomedical polymers from etched silicon substrates.

A new method is described for producing biomedically relevant polymers with precisely defined micron scale surface texture in the x, y, and z planes. Patterned Si templates were fabricated using photolithography to create a relief pattern in photoresist with lateral dimensions as small as 1 micron. Electroless Ni was selectively deposited in the trenches of the patterned substrate. The Ni served as a resilient mask for transferring the patterns onto the Si substrate to depths of up to 8.5 microns by anisotropic reactive ion etching with a fluorine-based plasma. The 3-dimensional (3-D) textured silicon substrates were used as robust, reusable molds for pattern transfer onto poly (dimethyl siloxane), low density poly (ethylene), poly (L-lactide), and poly (glycolide) by either casting or injection molding. The fidelity of the pattern transfer from the silicon substrates to the polymers was 90 to 95% in all three planes for all polymers for more than 60 transfers from a single wafer, as determined by scanning electron microscopy and atomic force microscopy. Further, the 3-D textured polymers were selectively modified to coat proteins either in the trenches or on the mesas by capillary modification or selective coating techniques. These selectively patterned 3-D polymer substrates may be useful for a variety of biomaterial applications.

Biocompatible Materials↗
PubMed1992

Cell surface modifications induced by calcium ion in the myxobacterium Stigmatella aurantiaca.

Calcium ion induces in the myxobacterium Stigmatella aurantiaca the ability to glide on solid surfaces and to become cohesive (D. F. Gilmore and D. White, J. Bacteriol. 161:113-117, 1985; B. J. Womack, D. F. Gilmore, and D. White, J. Bacteriol. 171:6093-6096, 1989). The addition of calcium ion to the growth medium resulted in the formation of extracellular fibrils, the appearance in the membrane fractions of a 30-kDa protein, and the accumulation in a low-speed centrifugal pellet of 10 polypeptides that cross-reacted with affinity-purified antibody to one of the polypeptides. One of the polypeptides, a 55-kDa protein, was present in the membrane fraction of control cells not incubated with calcium ion and was apparently translocated to the extracellular matrix during incubation in medium containing calcium ion. The 55-kDa protein was immunologically related to a 65-kDa protein located on the fibrils of another myxobacterium, Myxococcus xanthus.

Bacterial Proteins↗
PubMed1995

Surface modification of albumin microspheres.

Submicron sized hydrophobic and hydrophilic albumin microspheres (MS) were prepared using a chemical crosslinking technique. Spermine was linked to the surface of the hydrophilic MS. The degree of hydrophobicity for these three types of MS was investigated using a novel technique of sedimentation volume. The surface tension of the hydrophobic MS was 31 mN m-1. The ST of the hydrophilic MS was 68 mN m-1, whereas the surface tension of spermine-linked MS corresponded to 62, 65.5, 69 and 71 mN m-1 indicating heterogeneous hydrophilic characteristics. Ligands can be successfully linked to MS using a water-soluble carbodiimide.

Albumins↗
PubMedDate not supplied

Enhancing chemi-mechanical transduction in microcantilever chemical sensing by surface modification.

The use of chemically selective thin-film coatings has been shown to enhance both the chemical selectivity and sensitivity of microcantilever (MC) chemical sensors. As an analyte absorbs into the coating, the coating can swell or contract causing an in-plane stress at the associated MC surface. However, much of the stress upon absorption of an analyte may be lost through slippage of the chemical coatings on the MC surface, or through relaxation of the coating in a manner that minimizes stress to the cantilever. Structural modification of MC chemical sensors can improve the stress transduction between the chemical coating and the MC. Surfaces of silicon MC were modified with focused ion beam milling. Sub-micron channels were milled across the width of the MC. Responses of the nanostructured, coated MCs to 2,3-dihydroxynaphthalene and a series of volatile organic compounds (VOCs) were compared to smooth, coated MCs. The analytical figures of merit for the nanostructured, coated MCs in the sensing of VOCs were found to be better than the unstructured MCs. A comparison is made with a previously reported method of creating disordered nanostructured MC surfaces.

Journal Article↗
PubMed1998

A novel method for surface modification to promote cell attachment to hydrophobic substrates.

The ability to study and regulate cell behavior at a biomaterial interface requires strict control over material surface chemistry. Perhaps the greatest challenge to researchers working in this area is preventing the fouling of a given surface due to uncontrolled protein adsorption. This work describes a method for coupling peptides to hydrophobic materials for the purpose of simultaneously preventing nonspecific protein adsorption and controlling cell adhesion. A hexapeptide containing the ubiquitous RGD cell-adhesion motif was coupled to polystyrene (PS) via a polyethylene oxide (PEO) tether in the form of a modified PEO/PPO/PEO triblock copolymer. Triblocks were adsorbed onto PS at a density of 3.3 +/- (5.14 x 10(-4)) mg/m2 (1.4 x 10(5) +/- 2.12 x 10(1) molecules/microm2), which was determined by isotope 125I labeling. The peptide, GRGDSY, was activated at the N terminus with N-Succinimidyl 3-(2-pyridyldithio) propionate and coupled to immobilized triblocks where the terminal hydroxyls had been converted to sulfhydryl groups. Surface peptide density was measured by amino acid analysis and found to be 1.4 x 10(4) +/- 0.47 x 10(4) molecules/microm2. PS modified with PEO/PPO/PEO copolymers alone was found to be inert to cell adhesion both in the presence of serum proteins and when exposed to activated RGD peptide. In contrast, PS conjugated with RGD via endgroup-activated PEO/PPO/PEO copolymers supported cell adhesion and spreading. The surface coupling scheme reported here should prove valuable for studying cell-ligand interactions under simplified and highly controlled conditions.

3T3 Cells↗
PubMed1987

Cell responses to biomaterials. I: Adhesion and growth of vascular endothelial cells on poly(hydroxyethyl methacrylate) following surface modification by hydrolytic etching.

Hydrogels of poly(hydroxyethyl methacrylate) (polyHEMA) homopolymer do not normally support the attachment and growth of mammalian cells. By altering the surface it has been possible to dramatically change this cell-substratum interaction so that vascular endothelial cells can attach and completely populate a polyHEMA surface. While this can be achieved by copolymerisation of polyHEMA with methacrylic acid or diethylaminoethyl methacrylate, it is most conveniently achieved by brief treatment of polyHEMA hydrogel with concentrated sulphuric acid. The resultant creation of surface-COOH groups, revealed by electron spectroscopy for chemical analysis, is consistent with the hydrolytic formation of methacrylic acid on the surface layer. Surface--COOH groups created by treatment with chloric or hydrofluoric acids were not effective. Following sulfuric acid treatment, cell adhesion and growth on polyHEMA hydrogel were better than on Teflon and approached those attained on glow-discharge-treated polystyrene. The capacity of acid-treated polyHEMA to adsorb albumin or fibronectin was of the order of 100-fold or 10-fold lower respectively than either polystyrene, Teflon, or segmented polyurethane. Hydrolytic "etching" in this way is proposed as an efficient means of expanding the use of polyHEMA hydrogel as a biomaterial without modifying the overall physicochemical properties of the bulk of the material.

Acrylates↗
PubMedDate not supplied

Surface modification of polycaprolactone membrane via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells.

Amino groups were covalently introduced onto a polycaprolactone (PCL) surface by the reaction between 1,6-hexanediamine and the ester groups of PCL. The occurrence of the aminolysis and the introduction of free NH(2) groups were verified qualitatively by fluorescence spectroscopy, where rhodamine B isothiocyanate was employed to label NH(2) groups, and quantitatively by absorbance spectroscopy, where ninhydrin was used to react with NH(2) to generate a blue product. Due to the presence of deep pores on the PCL membrane, the aminolysis reaction could penetrate as deep as 50 microm to yield NH(2) density as high as 2 x 10(-7) mol/cm(2). By use of the NH(2) groups as active sites, biocompatible macromolecules such as gelatin, chitosan, or collagen were further immobilized on the aminolyzed PCL membrane via a cross-linking agent, glutaraldehyde. X-ray photoelectron spectroscopy (XPS) and surface wettability measurements confirmed the coupling of the biomacromolecules. The endothelial cell culture proved that the cytocompatibility of the aminolyzed PCL was improved slightly regardless of the NH(2) amount on the surface. After immobilization of the biomacromolecules, however, the cell attachment and proliferation ratios were obviously improved and the cells showed a similar morphology to those on tissue culture polystyrene. Measurement of the von Willebrand factor (vWF) secreted by these endothelial cells (ECs) verified the endothelial function. Hence, a better EC-compatible PCL was produced.

Amination↗
PubMed2005

Atomic force microscopy study of the interaction between adsorbed poly(ethylene oxide) layers: effects of surface modification and approach velocity.

The interaction forces between layers of the triblock copolymer Pluronic F108 adsorbed onto hydrophobic radio frequency glow discharge (RFGD) thin film surfaces and hydrophilic silica, in polymer-free 0.15 M NaCl solution, have been measured using the atomic force microscope (AFM) colloid probe technique. Compression of Pluronic F108 layers adsorbed on the hydrophobic RFGD surfaces results in a purely repulsive force due to the steric overlap of the layers, the form of which suggests that the PEO chains adopt a brush conformation. Subsequent fitting of these data to the polymer brush models of Alexander-de Gennes and Milner, Witten, and Cates confirms that the adsorbed Pluronic F108 adsorbs onto hydrophobic surfaces as a polymer brush with a parabolic segment density profile. In comparison, the interaction between Pluronic F108 layers adsorbed on silica exhibits a long ranged shallow attractive force and a weaker steric repulsion. The attractive component is reasonably well described by van der Waals forces, but polymer bridging cannot be ruled out. The weaker steric component of the force suggests that the polymer is less densely packed on the surface and is less extended into solution, existing as polymeric isolated mushrooms. When the surfaces are driven together at high piezo ramp velocities, an additional repulsive force is measured, attributable to hydrodynamic drainage forces between the surfaces. In comparing theoretical predictions of the hydrodynamic force to the experimentally obtained data, agreement could only be obtained if the flow profile of the aqueous solution penetrated significantly into the polymer brush. This finding is in line with the theoretical predictions of Milner and provides further evidence that the segment density profile of the adsorbed polymer brush is parabolic. A velocity dependent additional stepped repulsive force, reminiscent of a solvation oscillatory force, is also observed when the adsorbed layers are compressed under high loads. This additional force is presumably a result of hindered drainage of water due to the presence of a high volume fraction of polymer chains between the surfaces.

Journal Article↗
PubMed2005

Surface modification of magnetic nanoparticles with alkoxysilanes and their application in magnetic bioseparations.

A versatile and inexpensive method for the introduction of amine groups onto the surface of silica-coated magnetite composite nanoparticles has been established based on the condensation of (aminopropyl)triethoxysilane (APTS). The process was observed to be sensitive to a range of variables, and a range of silane surface-modified nanoparticles was synthesized under various reaction conditions, that is, solvent systems [water, tetrahydrofuran (THF), ethanol, or 1:1 mixtures of them], reaction times (from 1 to 24 h), and temperatures (18, 50, and 70 degrees C), with water as the catalyst and silane at either 0.2% or 2% (w/v) in an attempt to optimize the process. The products of the various reactions were characterized in terms of their possession of surface -NH2 groups, morphologies, and properties with respect to DNA binding and elution before being modified with a single-stranded oligonucleotide capture sequence. It was observed that careful manipulation of temperature, time, and solvent conditions was important for optimal silanization of the nanoparticles, and in our experiments best results were obtained when silanization of the particles in suspension involved use of water as the solvent and APTS at 0.2% (w/v) and when the reaction was conducted at room temperature for 5 h and was preceded by ultrasonication of the particle suspension. The materials produced were used in experiments to selectively capture complementary nucleic acid sequences by hybridization after grafting with an oligonucleotide. The efficiency of the oligonucleotide-modified particles in the capture experiments was observed to be directly related to the original density of amine groups present at the surface of the support. The results indicate that surface engineering of the nanoparticles was possible by silanization under defined, optimized conditions. This approach could be extended to the activation of such surfaces and other materials with other functional groups.

Kinetics↗
PubMed1990

Surface modification can affect the carcinogenicity of asbestos.

A sample of amosite asbestos was modified by effectively adding C8 and C18 hydrocarbon chains to the fibre surfaces. The altered fibres interacted less readily with cells in vitro and were less cytotoxic. In whole animals the number of mesotheliomas produced by the C8 material was the same as that with the parent material but the tumours occurred earlier. The C18 derivatized fibre was markedly less active in the production of tumours. This is the first report demonstrating that similar size fibres with differing surfaces have different pathogenic properties.

Animals↗