SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The effect of particle size and percentage concentration of noramidopyrine methansulfonate sodium on its release from Witepsol H 15 suppository base is studied. It is proved that the finer the drug particles the less its release and the more the drug concentration the more its release.
OBJECTIVES: The increasing interest in the elimination of amalgam particles from the dental waste (DW) stream, requires efficient devices to remove these particles. The major objective of this project was to perform a comparative evaluation of five basic methods of particle size analysis in terms of the instrument's ability to quantify the size distribution of the various components within the DW stream. METHODS: The analytical techniques chosen were image analysis via scanning electron microscopy, standard wire mesh sieves, X-ray sedigraphy, laser diffraction, and electrozone analysis. The DW particle stream components were represented by amalgam powders and handpiece/diamond bur generated specimens of enamel; dentin, whole tooth, and condensed amalgam. RESULTS: Each analytical method quantified the examined DW particle stream components. However, X-ray sedigraphy, electrozone, and laser diffraction particle analyses provided similar results for determining particle distributions of DW samples. These three methods were able to more clearly quantify the properties of the examined powder and condensed amalgam samples. Furthermore, these methods indicated that a significant fraction of the DW stream contains particles less than 20 microm. SIGNIFICANCE: The findings of this study indicated that the electrozone method is likely to be the most effective technique for quantifying the particle size distribution in the DW particle stream. This method required a relative small volume of sample, was not affected by density, shape factors or optical properties, and measured a sufficient number of particles to provide a reliable representation of the particle size distribution curve.
An 18-wk lactation study was conducted to determine whether the effects of tallow on the lactation performance of dairy cows were influenced by particle size of hay in the ration. A total mixed ration containing 50% concentrate, 25% corn silage, and 25% alfalfa hay (dry matter basis) was fed to Holstein cows. Four total mixed rations were developed based on differences in the percentage of tallow in the concentrate and particle size of alfalfa hay: 1) 0% tallow, long-cut hay; 2) 0% tallow, short-cut hay; 3) 5% tallow, long-cut hay; and 4) 5% tallow, short-cut hay. Ration had no effect on dry matter intake, body weight gain or change in body condition score. Tallow increased milk and milk protein yields but reduced milk protein concentration. However, the effects of tallow on milk and milk protein yields were the same, regardless of hay length in the ration. A tendency for an interaction of tallow and hay particle size was detected for fat-corrected milk (FCM) because tallow increased FCM more when hay was short. Ration had no effect on volatile fatty acids in ruminal samples collected via a stomach tube. In this study, the effects of tallow on milk yield and composition from Holstein cows were the same, regardless of hay particle size in the ration. The tendency for tallow to increase FCM more when hay was short suggests at least a limited role of forage particle size in the determination of how fat supplements in dairy rations affect lactation performance.
PURPOSE: The purpose of this study is to investigate the albuterol loading effect on particle size measurements by studying the effect of the amount of albuterol delivered, the number of puffs used, and the sampling techniques used in particle size measurement. METHODS: Particle size distribution profiles for different albuterol loadings were evaluated using an 8-stage cascade impactor and a sensitive HPLC electrochemical assay method. A commercial albuterol MDI (Proventil) and other specially prepared albuterol MDIs were used in the study. RESULTS: As the amount of albuterol was increased, either by increasing the number of puffs or the amount delivered per puff, the measured MMAD increased. This increase was more prominent in some formulations (Proventil) than others. Further, albuterol particles previously deposited on the valve and/or actuator didn't play a role in the observed multi-puff/loading effect. CONCLUSIONS: The collection of the least amount of aerosol in a cascade impactor provides a better estimate of MMAD, as it minimizes modifications of the collection surfaces.
The distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) was examined according to particle size in marine sediments, with a particular focus on fine particulates. Samples from different coastal sites were fractionated into five size groups (<2, 2-5, 5-10, 10-20, and 20-63 microm diameter) by gravitational split-flow thin fractionation. Despite the different size profiles and PCDD/F contents of the sediments at each site, PCDD/F levels in fractionations tended to increase as the particle size decreased; the PCDD/F levels in the finest particles were up to 16 times higher than in the coarsest particles, which was associated with their organic carbon contents. Log normalization showed high levels of PCDD/Fs in the fine silt particles (2-10 microm), which are consumable by aquatic biota. Because of the different toxicity and bioavailability of PCDD/Fs in different sediment particle sizes, it is important to study particle actions to understand their effects on the aquatic ecosystem.
These studies were undertaken to determine whether differences in plasma triglyceride concentrations reflected differences in the number or in the size of the triglyceride-rich lipoprotein particles in the circulation. A population of 122 men and women, composed of normotriglyceridemic individuals and individuals with endogenous hypertriglyceridemia (plasma triglyceride concentration from 60 mg/dl to 1400 mg/dl), was studied by one of four independent experimental procedures. Rates of triglyceride production and particle (as reflected by apolipoprotein B) production were simultaneously determined. The data suggest that 71% of any increase in triglyceride production was due to an increase in the production of particles, and only 29% was due to an increase in the amount of triglyceride carried per particle. Direct measurement of the triglyceride-rich lipoprotein particle size by electron microscopy demonstrated that for a fivefold difference in triglyceride borne by the Sf 12-400 lipoproteins (from 100 mg to 500 mg triglyceride/dl plasma), the mean particle size rose by only 29%. Hence, 71% of this difference was due to an increase in particle number. The same results were obtained when triglyceride levels were related to the number of triglyceride-rich lipoproteins in the plasma. The number of particles for these studies was either estimated from apo B concentration or by calculations based on the chemical composition of ultracentrifugal subfractions. These studies have used four different approaches to show that changes of plasma triglyceride concentration primarily reflected a change in the number, not the size, of triglyceride-rich lipoprotein particles. Our studies also demonstrated that 75% to 80% of the triglyceride-rich lipoproteins in both normotriglyceridemic and hypertriglyceridemic subjects were in the Sf 12-60 or intermediate density lipoprotein subfraction.
Macroporous polymeric scaffolds are frequently used in tissue engineering to allow for cell seeding and host cell invasion of the scaffold following implantation. The process of gas foaming/particulate leaching (GF/PL) is one method to form porous three dimensional scaffolds from particulate poly(lactide-co-glycolide) (PLG). The current study was designed to test the hypothesis that the size of the polymer particles used in this process will control the properties of the scaffolds. Scaffolds were prepared from PLG particles of various sizes (less than 75 microm, 75-106 microm, 106-250 microm and 250-425 microm) and subsequently analyzed. Scaffolds formed from large particles (250-425 microm) displayed significantly decreased compressive moduli, as compared to scaffolds fabricated from smaller particles. In addition, these scaffolds have a pore structure that is less interconnected and contains closed pores. Analysis of tissue in-growth, utilizing a novel computer-aided method, demonstrated that scaffolds formed from smaller particle sizes (less than 106 microm) have significantly more tissue penetration than those formed from larger particle sizes (greater than 106 microm). These results indicate that using small PLG particles (less than 106 microm) leads to high elastic moduli, provides a more interconnected pore structure and promotes greater tissue penetration into the scaffolds in vivo.
BACKGROUND: Small, dense low-density lipoprotein (LDL) in subjects with the atherogenic pattern B has been established as a risk factor of atherosclerosis. Cholesteryl ester transfer protein (CETP) plays an important role in the transfer and exchange of cholesteryl esters and triglycerides between the lipoprotein classes of human plasma. It has been shown that CETP can also change the particle size of high-density lipoprotein (HDL) and LDL subfractions in vitro. Previous clinical studies about CETP gene mutations mainly focused on abnormalities in HDL, few involved those in LDL. OBJECTIVES: To investigate the effect of the D442G mutation in the CETP gene on major peak size of LDL particles in patients with coronary heart diseases (CHD). METHODS: D442G mutation in the CETP gene was detected using the PCR-RFLP. LDL particles sizes were analyzed by 2-16% nondenaturing polyacrylamide gradient gels in CHD patients with D442G mutation in the CETP gene. RESULTS: Six heterozygotes and one homozygote were found to have the D442G mutation among 200 CHD patients. The frequency of this mutation was 3.5%. The major peak size of LDL in patients with gene mutation (n=7) was significantly larger than that in patients without the mutation (n=40) (26.92 +/- 0.79 nm vs. 25.71 +/- 0.66 nm, respectively; P<0.01). All the patients with the gene mutation expressed pattern A, whereas only about half of the patients without the mutation expressed this pattern. The patients with gene mutation had decreased plasma CETP concentration, while increased concentration of HDL-C and apolipoprotein A-I compared with controls. CONCLUSIONS: CETP gene mutation (D442G) increases LDL particle size. This suggests that CETP play an antiatherogenic role.
A study was performed in order to elucidate the effects of the interactions between powder particle size and binder viscosity on the mechanisms involved in agglomerate formation and growth. Calcium carbonates having mean particle sizes in the range of 5-214 microm and polyethylene glycols having viscosities in the range of approximately 50-100000 mPas were melt agglomerated in a high shear mixer. Agglomerate growth by nucleation and coalescence was found to dominate when agglomerating small powder particles and binders with a low viscosity. Increasing the binder viscosity increased the formation of agglomerates by immersion of powder particles in the surface of the binder droplets. With a larger powder particle size, an increasing binder viscosity was necessary in order to obtain an agglomerate strength being sufficient to avoid breakage. Due to a low agglomerate strength, a satisfying agglomeration of very large particles (214 microm) could not be obtained, even with very viscous binders. The study demonstrated that the optimum agglomerate growth occurred when the agglomerates were of an intermediate strength causing an intermediate deformability of the agglomerates. In order to produce spherical agglomerates (pellets), a low viscosity binder has to be chosen when agglomerating a powder with a small particle size, and a high viscosity binder must be applied in agglomeration of powders with large particles.
The influence of pH of the dissolution fluid on the in-vitro release of acetylsalicylic acid from hard gelatin capsules has been studied for a series of particle size fractions of the drug. Generally, the time required for 50% of the drug content of the capsule to appear in solution during a dissolution test, T50, increased as the pH increased from 1.2 to 2.0; thereafter the value of T50 decreased as the pH increased from 3 to 7. These changes were found to be related to the apparent solubility of the drug. The extent of the changes was found to be further dependent on the particle size of the drug. For capsules filled with particle size fractions of 2.5 and 5.5 microns median diameter, the changes were small. Larger changes were observed with particles of median diameters of 45, 100, 220 and 330 microns while the largest changes (greater than two-fold) were obtained with particles of median diameter 130 and 430 microns. The type of kinetics that could be used to express the release rates was found to be particle size-dependent. For particles of 45 microns and larger, the release rate followed an apparent zero order process while an apparent first order process represented the release for the two smallest particle size fractions.
A basic investigation of boron in discharged fly ash by coal fuel thermal power plants in several worldwide locations was carried out. Eight kinds of fly ash sample were prepared from eight coal fuel thermal power plants. Two of the fly ash samples were used to examine the relationship between the concentration of boron in fly ash and the particle size. When the particle size of fly ash is smaller, there is a possibility that it will be released into the air and spread over a wide area in the environment. However, it has become apparent that fly ash of smaller particle size has a higher concentration of boron and a higher enrichment factor. In other fly ash samples, the boron contents were examined and leaching tests were carried out. There is acidic fly ash as well as alkaline fly ash that contains larger amounts of acidic or basic salts. On alkaline fly ash, when the concentration of boron bound to Fe-Mn oxide is low; it has become apparent that leaching boron is increased in a solution with lower pH of approximately 4 which is nearly the pH of acid rain.
OBJECTIVES: The aim of this study was to compare the success rate in lymphatic mapping and sentinel node biopsy in breast cancer using two radiopharmaceuticals. METHODS: The study included 119 breast cancer patients who underwent lymphoscintigraphy after a single intratumoral injection of 99mTc-labelled human albumin colloid with a particle size of 0.2-3 microm (Albu-Res) (large particle group) and 119 pair-matched control patients who underwent lymphoscintigraphy using 99mTc-labelled albumin colloid with a particle size of < 80 nm (Nanocoll) (small particle group). The dose of the tracer was used as the matching factor. RESULTS: Lymphoscintigraphy showed sentinel nodes in the axilla in 101 patients (85%) in the large particle group and in 104 patients (87%) in the small particle group. The mean number of visualized nodes in the axilla was 1.7 in the small particle group and 1.3 in the large particle group (P < 0.05). No radioactive nodes were found in the axilla during the operation in 22 patients (18%) in the small particle group and 11 patients (9%) in the large particle group (P < 0.06). Patients who avoided axillary clearance had a similar number of harvested radioactive nodes irrespective of the particle size of the tracer. CONCLUSIONS: It can be concluded that the success rate in the identification of axillary sentinel nodes may be higher when using the smaller particles, despite the similar visualization rate in lymphoscintigraphy. The number of harvested radioactive nodes was not affected by the particle size of the tracer in patients who avoided axillary clearance.
OBJECTIVE: To investigate the effect of routine dental floating on weight gain, body condition score, feed digestibility, and fecal particle size in pregnant mares fed various diets. DESIGN: Randomized controlled clinical trial. ANIMALS: 56 pregnant mares. PROCEDURE: Mares were randomly allocated to 1 of 4 feed groups (n = 14 mares/group). All horses were sedated and an oral examination was performed, after which dental floating was performed on 7 horses in each group. Body weight was measured, and a body condition score was assigned before and at various times for 24 weeks after dental floating. Feed digestibility and fecal particle size were analyzed 7 and 19 weeks after dental floating. RESULTS: Weight gain, change in body condition score, feed digestibility, and fecal particle size were not significantly different between horses that underwent dental floating and untreated control horses. In contrast, weight gain was significantly associated with feed group. In the control horses, neither the number of dental lesions nor the presence of any particular type of lesion at the time of the initial oral examination was significantly associated with subsequent feed digestibility. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that dental floating does not result in significant short-term changes in body weight, body condition score, feed digestibility, or fecal particle size in healthy pregnant mares. Further studies are necessary to determine the clinical utility of regular dental floating in apparently healthy horses.
The change in particle size of the liver scanning tin colloid radiopharmaceutical (Amerscan) has been determined using the non-perturbing method of photon correlation spectroscopy. Although samples of the tin colloid taken from the preparation vial immediately after preparation and allowed to remain undisturbed in the light scattering cell grow to sizes of ca. 1,200 nm radius, when samples are taken by syringe from the preparation vial at varying times, the particle size is only ca. 400 nm radius. This effect has been shown to be due to shear deflocculation within the syringe needle. Thus, as the tin colloid is always administered in the clinical situation with a syringe, the size of particle which the patient receives is satisfactory for liver uptake. The tin colloid has been shown to be essentially a charge-stabilised colloidal system from measurements of both zeta potential and effect of electrolyte on the flocculation process.
Isolated high density lipoprotein (HDL) from the two living fish eye disease patients have been incubated in vitro with autologous lipoprotein depleted plasma or with lipoprotein depleted plasma from domestic pig (Sus domesticus), with and without the presence of LCAT inhibitor for 24 hours at 0 and 37 degrees C. The lecithin:cholesterol acyltransferase (LCAT) activity in lipoprotein depleted pig plasma increased the abnormally low cholesteryl ester content of the fish eye disease HDL particles from about 20 to 100% and increased their exceptionally small mean particle size, probably by particle fusion, to a range which is representative of normal HDL3. Both esterification and particle enlargement were totally blocked by the LCAT inhibitor. Incubation of concentrated fish eye disease HDL with autologous lipoprotein depleted plasma for 24 hours at 37 degrees C resulted in a small increase in its cholesteryl ester percentage to 37%, without affecting the apparent HDL particle size. This finding confirms a deficiency of HDL lecithin:cholesterol acyltransferase activity (alpha-LCAT) in fish eye disease. The observed normalization of both HDL cholesteryl ester percentage and particle size by lipoprotein depleted pig plasma which contains virtually no cholesteryl ester transfer activity indicates that the latter is not a requisite for esterification of the free cholesterol of fish eye disease HDL.
A variety of methods exists for measuring individual particle dimensions as a means of characterizing particle size, size distribution, and shape. The equipment described in this report belongs to the class of semiautomatic non-TV-interfaced analyzers. Unlike many existing image analysis systems, three-dimensional form measurements and texture data for the calculation of particle size and shape parameters can be determined easily and directly from each particle profile using this system. Essentially all data are collected directly from the particle and recorded by the computer with no intermediate steps. Much of the system consists of general-purpose and relatively inexpensive, commercially available hardware and software. Using this method, particle size, size distribution, and qualitative or quantitative shape information can easily and rapidly be obtained simultaneously. Particle length and width characterization, for example, can take less than 15 min. The equipment is versatile and flexible in measurements and calculations. The size and shape parameters to be measured are determined by the researcher and not the instrument. The ease with which this information can be obtained from small samples early in the development process makes it a valuable tool for the formulator.
Five primiparous Holstein cows were cannulated in the rumen, duodenum, and ileum and were fed diets containing 50% alfalfa silage and 36.6% coarse-, medium-, or fine-ground corn (CGC, MGC, and FGC, respectively, with mean particle sizes of 4.8, 2.6, or 1.2 mm), steam-rolled corn (SRC; density of 0.53 kg/L), or a 50:50 mix of CGC and SRC (SC) to evaluate how corn processing affects site of digestibility of nonstructural carbohydrates (NSC) and neutral detergent fiber (NDF). Decreasing the particle size of corn quadratically affected true ruminal digestibility of NSC (49.8, 46.5, and 87.0%, respectively). Because of compensatory digestion postruminally, a smaller increase (from 91.3 to 98.0%) in total tract digestibility of NSC was noted as particle size decreased. A small but significant linear shift in NDF digestion from the rumen to the large intestine was detected as corn particle size decreased. The addition of SRC to CGC linearly increased true NSC digestibility in the rumen about 20 percentage units but had much smaller effects on total tract digestibility. Despite the large impact of corn processing on NSC digestibility in the rumen, flow of bacterial N to the rumen was not affected by treatment. Reducing the particle size of corn decreased the apparent escape of corn protein, but steam-rolling had no effect. Corn should be finely ground to maximize total tract OM digestibility or steam-processed to densities less than 0.53 kg/L for maximal starch digestibility. However, fine-grinding or steam-processing of corn may have only a modest impact on total tract OM digestibility.
In this study, mineral magnetic, particle size and geochemical analyses were conducted on intertidal sediments from the Yangtze Estuary to examine the feasibility of heavy metal concentrations normalization using magnetic techniques. Susceptibility of Anhysteretic Remanent Magnetization (chiARM), the ratio of chiARM to SIRM (Saturation Isothermal Remanent Magnetization) and susceptibility (chiARM/SIRM and chiARM/chi, respectively), and to a lesser degree, frequency dependent susceptibility (chifd), displayed significant correlations with the fine sediment fraction (<16 microm). The strong relationships between chiARM and heavy metals can be explained by the role of particle size and iron oxides in controlling metal concentrations. This study demonstrates that chiARM can be used to normalize for particle size effects as efficiently as common reference elements such as Al. Furthermore, the rapid and non-destructive nature of mineral magnetic measurement technique means that chiARM has a considerable application value in environmental quality monitoring and related studies.