PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

Solid waste management practices in U.S. Army medical treatment facilities.

U.S. Army medical treatment facilities (MTFs) will be challenged to reduce waste as the Army internalizes as environmental ethic and privatizes solid waste management. A questionnaire was modified to survey solid waste management practices, participation in waste reduction and recycling programs, and solid waste management problems in 25 MTFs. Questionnaires were returned by 19 (76%) of the sites. Eighteen sites participated in waste reduction and recycling programs. Twelve sites used contractors to disinfect potentially infectious solid waste off site. Mean importance ratings of waste reduction and recycling were 2.00 and 1.83 (1 = very important; 5 = very unimportant), respectively. Limited staffing was ranked as the most significant waste management problem, followed by cost and regulatory compliance. More information on waste generation in MTFs is needed. The Army Medical Department should be presented as a model of environmental and natural resource stewardship for the health care industry.

Conservation of Natural Resources↗

European policy on biodegradable waste: a management perspective.

The main characteristics of the European environmental policy are reviewed. Focusing on EU policy on waste, the paper presents the principles on which EU waste management is founded, particularly the waste hierarchy. In this hierarchy, priority shall be given to prevention of the generation of wastes and of its hazardousness. Secondly, the reuse and the recovery of materials (recycling), which implies the separation of waste at source involving consumers in the scheme of waste management. Priority should be given to material recycling over energy recovery. The less desirable option is the disposal of waste. The paper reviews specific directives on organic waste management, following the scheme of the waste hierarchy, together with the general trends observed in producing common regulations for all types of organic residuals. Afterwards, key issues and measures for the implementation of a feasible strategy for organic residuals management, e.g. quality requirements and quality assurance, are discussed. Finally, there is a view from a manager's perspective on the current EU policy, public acceptance and suitable waste management operations.

Biodegradation, Environmental↗

[Soil contamination from industrial and community waste in the Cracow area].

Problems are discussed connected with the contamination of soil with industrial and community waste in the period 1980-1987. In the Cracow area 82 million tons of waste was accumulated on dumping grounds, waste heaps and in sedimentation ponds for sewage which cover already 1.2% of the area. Among this waste 34% is produced by steel plants, 16% is mineral waste, 9% waste is produced by power plants, and 8% by chemical plants. Particular risk is connected with toxic waste produced mainly by the Lenin Steel Plant, Alwernia Chemical Plant, and Bonarka Cracow Inorganic Industry Plant. In the last 4 years an increase was observed in the amount of processed waste and the amount of dumped waste has decreased by 7.6% in the years 1984-1987. Nevertheless, the problem of processing or neutralization of toxic waste remains to be solved.

Hazardous Waste↗

Edible plate waste assessment in a university dining hall.

A method to measure and assess plate waste quantitatively in a university dining hall was developed and tested. Waste per person averaged 8.8 ox. per day, with total plate waste oer day estimated at 468 lb. Less waste occurred at breakfast than at the other two meals. One-fourth of all cooked vegetables served was wasted. The data also indicated that almost one-half of the total food waste was composed of beverage items. Mean cost of plate waste per person per day totaled +0.265. Impact of the cost of this plate waste on the total food budget was considerable, amounting to about +26,400 during the semester. Although reasons for plate waste were not determined as part of this study, examination of waste within or among food groups was informative, indicating where corrective measures could be targeted. Value of the study data can best be realized as a baseline for comparison with future studies.

Female↗

Medical wastes characterisation in healthcare institutions in Mauritius.

This study was initiated to characterize solid and liquid wastes generated in healthcare institutions and to provide a framework for the safe management of these wastes. The project was carried at three major medical institutions, namely, the Jeetoo Hospital, the Sir Seewoosagur Ramgoolam National (SSRN) Hospital and the Clinic Mauricienne. A waste audit carried out at these sites revealed that approximately 10% of solid wastes was hazardous in nature, consisting mainly of infectious, pathological and chemical wastes. The average amount of hazardous wastes per patient per day was found to be 0.072 kg at Jeetoo hospital, 0.091 kg at SSRN hospital and 0.179 kg at the clinic. The amount of hazardous wastes generated as a function of the number of occupied beds was found to follow a relationship of type y=0.0006x-0.19, where y was the amount of hazardous wastes generated per bed per day and x was the number of occupied beds. The waste quantifying process also revealed that at SSRN Hospital, 0.654 m(3) of water was being consumed per patient per day and the amount of wastewater produced was 500 m(3)/day. Further analysis revealed that the wastewater was polluting with chemical oxygen demand (COD), biological oxygen demand (BOD(5)), total suspended solids (TSS) and coliform content well above permissible limits.

Hazardous Waste↗

Solid waste treatment as a high-priority and low-cost alternative for greenhouse gas mitigation.

The increased concern about environmental problems caused by inadequate waste management, as well as the concern about global warming, promotes actions toward a sustainable management of the organic fraction of the waste. Landfills, the most common means to dispose of municipal solid waste (MSW), lead to the conversion of the organic waste to biogas, containing about 50% methane, a very active greenhouse gas (GHG). One unit of methane has a global warming potential of 21 computed for a 100-year horizon or 56 computed for 20 years. The waste sector in Israel contributes 13% of total greenhouse gases (GHG) emissions for a time horizon of 100 years (for a time horizon of 20 years, the waste sector contribution equals to more than 25% of total GHG emissions). The ultimate goal is to minimize the amount of methane (CH4) by converting it to CO2. This can be achieved by physicochemical means (e.g., landfill gas flare, incineration) or by biological processes (e.g., composting, anaerobic digestion). Since the waste in Israel has a high organic material content, it was found that the most cost-effective means to treat the degradable organic components is by aerobic composting (investment of less than US$ 10 to reduce emission of one ton CO2 equivalent per year). Another benefit of this technology is the ability to implement it within a short period. The suggested approach, which should be implemented especially in developing countries, could reduce a significant amount of GHG at relatively low cost and short time. The development of a national policy for proper waste treatment can be a significant means to abate GHG emissions in the short term, enabling a gain in time to develop other means for the long run. In addition, the use of CO2 quotas will credit the waste sector and will promote profitable proper waste management.

Biodegradation, Environmental↗

Stabilization/solidification of munition destruction waste by asphalt emulsion.

Destruction of discarded military munitions in an explosion chamber produces two fractions of hazardous solid waste. The first one is scrap waste that remains in the chamber after explosion; the second one is fine dust waste, which is trapped on filters of gas products that are exhausted from the chamber after explosion. The technique of stabilization/solidification of the scrap waste by asphalt emulsion is described in this paper. The technique consists of simple mixing of the waste with anionic asphalt emulsion, or two-step mixing of the waste with cationic asphalt emulsion. These techniques are easy to use and the stabilized scrap waste proves low leachability of contained heavy metals assessed by TCLP test. Hence, it is possible to landfill the scrap waste stabilized by asphalt emulsion. If the dust waste, which has large specific surface, is stabilized by asphalt emulsion, it is not fully encapsulated; the results of the leaching tests do not meet the regulatory levels. However, the dust waste solidified by asphalt emulsion can be deposited into an asphalted disposal site of the landfill. The asphalt walls of the disposal site represent an efficient secondary barrier against pollutant release.

Emulsions↗

Pilot installation for the thermo-chemical characterisation of solid wastes.

The increasing production and the large variety of wastes require operators of thermal treatment units to continuously adapt the installations or the functioning parameters to the different physical and chemical properties of the wastes. Usually, the treated waste is encountered in the form of heterogeneous mixtures. The classical tests such as thermogravimetry and calorimetric bomb operate component by component, separately. In addition to this, they can analyse only small quantities of waste at a time (a few grams). These common tests are necessary but insufficient in the global waste analysis in the view further thermal treatment. This paper presents an experimental installation, which was designed and built at the CNRS Science Division, Department of Industrial Methods, Compiègne University of Technology, France. It allows the determination of waste thermal and chemical properties by means of thermal treatment. Also, it is capable of continuously analysing significant quantities of waste (up to 50kg/h) as compared to the classical tests and it can work under various conditions: The installation reproduces the process conditions from incinerators or pyrolysis reactors. It also provides complete information on the kinetics of the waste thermal degradation and on the pollutant emissions. Using different mixtures of components present in the municipal solid waste and also in the reconstituted MSW samples, we defined a series of criteria for characterising waste behaviour during the stages of the main treatment process such as: feeding, devolatilisation/oxidation, advancement, solid residue evacuation, and pollutants emission.

Oxidation-Reduction↗

An environmental analysis for comparing waste management options and strategies.

The debate on different waste management practices has become an issue of utmost importance as human activities have overloaded the assimilative capacity of the biosphere. Recent Italian law on solid waste management recommends an increase in material recycling and energy recovery, and only foresees landfill disposal for inert materials and residues from recovery and recycling. A correct waste management policy should be based on the principles of sustainable development, according to which our refuse is not simply regarded as something to eliminate but rather as a potential resource. This requires the creation of an integrated waste management plan that makes full use of all available technologies. In this context, eMergy analysis is applied to evaluate three different forms of waste treatment and construct an approach capable of assessing the whole strategy of waste management. The evaluation included how much investment is needed for each type of waste management and how much "utility" is extracted from wastes, through the use of two indicators: Environmental yield ratio (EYR) and Net eMergy. Our results show that landfill is the worst system in terms of eMergy costs and eMergy benefits. Composting is the most efficient system in recovering eMergy (highest EYR) from municipal solid waste (MSW) while incineration is capable of saving the greatest quantity of eMergy per gram of MSW (highest net eMergy). This analysis has made it possible to assess the sustainability and the efficiency of individual options but could also be used to assess a greater environmental strategy for waste management, considering a system that might include landfills, incineration, composting, etc.

Conservation of Energy Resources↗

Waste ashes for use in agricultural production: I. Liming effect, contents of plant nutrients and chemical characteristics of some metals.

The chemical characteristics of 89 municipal waste ashes, including food scrap ash (FSA), animal waste ash (AWA), horticulture waste ash (HWA), sewage sludge ash (SSA) and incinerator bottom ash (IBA), from various locations in Japan were examined with the aim of evaluating their suitability for use in agriculture. Although the waste ashes came from different sources and consisted of various materials, the gross elemental composition was similar. Acid neutralization capacity (liming effect) for the waste ashes was equivalent to 10-30% of CaO and followed the sequence SSA > IBA > AWA > FSA > HWA. Average P concentrations for the five types of waste ashes ranged from 10 to 29 g kg(-1) and average K concentrations ranged from 14 to 63 g kg(-1), respectively. Metal contents in the waste ashes were compared with levels in Japanese agricultural soils. K in the waste ashes was 1.3-6 times higher and Ca was 3-12 times higher; contents of the other metals in FSA, AWA and HWA were generally less than five times higher, but Ni, Cu, Zn, Cd, Sn, Pb in SSA or IBA were approximately 10-200 times higher than those in soils. Moreover, the ceiling amounts of waste ashes that may be applied to main Japanese agricultural soils were calculated by using soil contamination standards for Cu. Water solubility of P and metals in the waste ashes were also examined.

Agriculture↗

Dioxin-like PCBs released from waste incineration and their deposition flux.

To investigate the formation and decomposition behaviors of dioxin-like PCBs during incineration of municipal solid wastes in a recently constructed facility, the concentrations of dioxin-like PCBs were measured in municipal solid waste before incineration and in the incinerator emission gas and residues. Using these values, release/inflow ratios of dioxin-like PCB congeners (ratio of the amount released from the incinerator to the amount flowing into the incinerator through waste) were calculated. For PCB congeners 126, 169, and 189, these ratios were greater than 1. In contrast, ratios of the other dioxin-like congeners were much less than 1. To take into account atmospheric sources, the amounts of dioxin-like PCBs released via emissions from municipal solid waste incineration were compared with atmospheric depositions in the Kyoto City area. Most of the PCDD/F congeners and homologue groups were deposited in amounts similar to those found in emissions from the waste incinerator. Deposition of dioxin-like PCB congeners 81, 126, 169, and 189 were also found in amounts similar to those released via the waste incinerator emissions. However, depositions of congeners 105, 114, and 118 greatly exceeded the amounts released via waste incinerator emissions. In reviewing the congener profiles of industrial PCB products and emission gas, the following general trends were observed: (i) For congeners whose contents are high in industrial PCB products (e.g., 105 and 118), the amounts deposited were much higher than the amounts released with waste incineration emission gas. (ii) For congeners whose percentages were high in the waste incineration emission gas (e.g., 126 and 189), the amounts deposited were similar to the amounts released in the waste emission gas.

Air Pollutants↗

Whole body cellular and collagen nitrogen in healthy and wasted man.

The classical literature shows that wasting of body protein takes place mainly from the cellular compartment leaving high proportions of extracellular collagen. Whole body nitrogen ( WBN ) is proportional to whole body protein (cellular + extracellular) while whole body potassium ( WBK ) is almost entirely intracellular. WBK might be an adequate index of cellular wasting. WBN was measured by neutron activation and WBK by counting 40K in 29 healthy males and 131 male and female patients with wide ranges of body composition. Our wasted patients with Crohn's disease or ulcerative colitis, had higher WBN / WBK ratios than matched healthy controls and the difference between the two groups was in the cellular ratio (23.6 mol of N/mol of K, 0.33 g of N/mmol of K, 3 mmol of K/g of N). A multiple regression model for all the subjects represented cellular nitrogen by a term in WBK and extracellular nitrogen by simple anthropometric measurements. The partial regression coefficient of WBN on WBK was 22.6 +/- 1.1 (SE) mol of N/mol of K; this was also similar to the cellular ratio. Our results were compatible with extracellular protein (mainly collagen, which is 35% of normal whole body protein) remaining resistant to wasting even when severe loss of cellular protein occurs. The high ratios of WBN / WBK in wasted patients can be explained by this disproportionate wasting of cellular substances and they do not imply alterations in the cellular N/K ratio. We suggested that the stable ratio of WBK to cellular protein makes it an effective index of cellular wasting. The resistance of collagen to wasting and the preponderance of extracellular mass in the fat-free mass of wasted subjects, make WBN and fat-free mass unreliable guides to the extent of wasting.

Activation Analysis↗

HIV wasting syndrome in the United States.

OBJECTIVE: To describe the characteristics of individuals > or = 13 years of age with HIV wasting syndrome in the United States and US territories. DESIGN: Retrospective review of national AIDS case surveillance data. METHODS: Data for the 147,225 individuals with AIDS reported to the Centers for Disease Control from 1 September 1987 to 31 August 1991 were reviewed. The frequency of HIV wasting syndrome and its association with demographic and exposure category variables and with other AIDS-indicator diseases were assessed. RESULTS: A total of 10,525 (7.1%) had wasting syndrome as the only AIDS-indicator condition, and 15,726 (10.7%) had wasting syndrome plus at least one other AIDS-indicator condition. Patients with wasting syndrome as the only AIDS diagnosis were more likely to be female, to be black or Hispanic, and to have a mode of HIV exposure reported as injecting drug use, heterosexual contact, or transfusion/hemophilia. The proportion of AIDS patients reported with wasting syndrome varied by geographic distribution, ranging from 11% in the northeastern United States to 47% in Puerto Rico. The association between HIV wasting syndrome and Hispanic ethnicity was due to the much higher prevalence of wasting syndrome reported in Puerto Rican AIDS patients. The other AIDS-indicator conditions most strongly associated with wasting syndrome were isosporiasis, pulmonary candidiasis, esophageal candidiasis, HIV encephalopathy, chronic mucocutaneous herpes simplex, and coccidioidomycosis. CONCLUSIONS: The association between HIV wasting syndrome and injecting drug use, and the significant racial/ethnic and geographic differences in prevalence of this AIDS diagnosis may reflect differences in diagnostic and reporting practices and/or access to medical care.

AIDS-Related Opportunistic Infections↗

Determination of oxygen consumption for landfilled municipal solid wastes.

One of the serious problems of landfilling is the long time required for stabilisation. Nevertheless, site aeration proved to be effective to attenuate such problems. Oxygen consumption rate and air permeability/diffusion are the key parameters to set up the best allocation and design for vertical pipes to promote aeration and hence stabilisation of waste. This paper presents an investigation into the oxygen consumption for various landfilled wastes in Japan such as incineration ash, incombustible waste and under-sieve fraction of shredded bulky waste. Fresh waste sampled directly from processing facilities, as well as old waste sampled from landfill sites, were subjected to analytical determination and measurement of oxygen consumption. Bulky waste showed the highest oxygen consumption, however the old waste revealed a significant loss of biodegradability potential and lower oxygen consumption records. The oxygen consumption for short testing periods (10-days), tends to increase with the ignition loss (IL). The experimental data of respiratory tests (for old waste) were modelled and the fitting parameters are correlated to waste characteristics.

Biodegradation, Environmental↗

Exposure to Organic Dusts, Endotoxins, and Microorganisms in the Municipal Waste Industry.

The waste-collection and -processing industry in Europe is developing rapidly due to environmental constraints in the direction of separate collection, processing, and recycling of waste. It is likely that this will lead to an increase in the number of workers involved in the handling and processing of municipal waste, and an increase in the number of workers exposed to organic dust. This paper reports the results of an occupational hygiene study of the waste-collection and -processing industry (a compost-screening facility, a resource-recovery facility, and two waste-transfer facilities) in The Netherlands. It focuses on organic dusts, endotoxins, and microorganisms (total and gram-negative bacteria and fungi). Levels of exposure to inhalable organic dusts were highest in the waste-processing facilities (compost screening and resource recovery), with average concentrations for organic dusts up to 14.3 mg/m(3) during manual separation of waste and 9.7 mg/m(3) during compost screening activities. Personal endotoxin exposure was highest in the resource-recovery facility, ranging from 32.0 ng/m(3) for the supervisor to 131.1 ng/m(3) during manual separation of waste. High concentrations of microorganisms were found in all facilities. The highest levels for both total fungi and bacteria (<> 10&sup6; cfu/m(3)) were recorded in the dumping pit at the resource-recovery plant and in the dumping pit at one of the waste-transfer plants. It is concluded that high levels of exposures to microorganisms, and to a lesser extent organic dusts and endotoxins, are likely to occur in many processes and activities in the waste-transfer and -processing industry, and that the possibility of health effects due to these exposures cannot be excluded.

Journal Article↗

Nutrient utilization by sheep and performance and carcass characteristics of steers fed crab waste-straw silage.

Crab waste preserved with .2% NaOCl was mixed with wheat straw, liquid molasses, and water (32:32:16:20, wet basis) and ensiled for a minimum of 8 wk with microbial inoculant. A reduction in pH and water-soluble carbohydrates (WSC) and a higher concentration of lactic acid (4.9%, DM basis) were achieved. The trimethylamine (TMA) concentration in the silage was 11.2 mg N/100 g. In a digestion trial, 18 crossbred wethers (43 kg) were fed three diets: 1) basal, 2) a 50:50 mixture, DM basis, of basal and crab waste-straw silage, and 3) 100% crab waste-straw silage. Apparent digestibility of DM, OM, CP, energy, NDF, ADF, cellulose, and hemicellulose decreased linearly (P < .01) with increased levels of crab waste-straw silage. Nitrogen retention increased linearly (P < .05) with level of crab waste-straw silage. Apparent absorption was higher (P < .01) and retention was positive (P < .05) for Ca, Mg, Na, K, Cu, and Fe for sheep fed the highest level of crab waste-straw silage. In a 108-d trial, 30 yearling steers were fed diets in which crab waste-straw silage was included in the diet at 0, 15, and 26%, DM basis. Average daily gain tended to be highest (linear effect, P < .15) and carcass weights were highest (linear effect, P < .05) for steers fed 26% crab waste-straw silage. Average carcass quality grade was low Choice, and yield grade averaged 2.3, with no significant differences among treatments. Consumption of crab waste-straw silage did not adversely affect the taste of the meat. Results indicate that feeding crab waste-straw silage did not adversely affect nutrient utilization or performance of ruminants.

Animal Feed↗

Seasonal variations in exposure to microbial cell wall components among household waste collectors.

BACKGROUND: Collection, separation, and composting of household waste generates organic dusts that may contain the inflammagenic agent endotoxin and (1-->3)-beta-D-glucan, a cell wall component of fungi, plants and certain bacteria. In previous studies, waste collectors have reported a greater number of or more severe symptoms in the summer. To further elucidate whether a seasonal variation in exposure could support previous findings of the presence of symptoms during summer months, a study was performed to assess exposures to airborne (1-->3)-beta-D-glucan and endotoxin during different seasons among household waste collectors handling compostable waste. METHODS: Measurements were made of the amounts of airborne (1-->3)-beta-D-glucan and endotoxin using personal sampler equipment in two household waste collectors handling compostable waste. Measurements were made every second week from September 1998 to January 2000. RESULTS: The amounts of airborne endotoxin were low during the study period. The amount of airborne (1-->3)-beta-D-glucan was higher during the warm season, and there was a relationship between exposure levels of (1-->3)-beta-D-glucan and outdoor temperature. CONCLUSIONS: The results suggest that household waste collectors handling compostable waste can be exposed to airborne (1-->3)-beta-D-glucan, especially during the warm season, when more symptoms have been reported among waste collectors, according to previous studies. This cannot be interpreted as a causal relationship as household waste may contain several agents that could cause effects. Further studies are needed to explore such relationships.

Air Pollutants, Occupational↗

Monitoring waste in an intravenous admixture program.

A method for collecting and analyzing data on i.v. admixture waste is described, and examples of the use of these data to reduce waste are presented. In 1984, a pharmacy department serving 580 hospital beds projected annual expense for waste of i.v. products to be nearly $30,000. Five major changes were implemented to reduce waste. Modification of expiration dating policies for cefoxitin and tobramycin substantially reduced waste. After an operating room pharmacy satellite was opened, decreased waste of dobutamine, dopamine, nitroglycerin, and nitroprusside was estimated to save $1000 per year. Changing times of batch processing of i.v. admixtures resulted in cost savings that were not significantly different for three-month periods before and after the change. The method of identifying small-volume injections (SVIs) to be manufactured was improved, and SVIs of expensive drugs were prepared every 12, instead of 24, hours; these changes resulted in reduction of one technician full-time equivalent but little change in the percentage or cost of SVIs wasted. Decentralized pharmacists were asked to order certain items on an as-needed basis; this did not affect costs or waste. From 1984 to 1985, total costs associated with waste decreased an estimated $11,000, or 27.5%. This department's attempt to change i.v. admixture procedures based on timely data has resulted in substantial reductions in the cost of waste.

Cost Control↗