SEARCH · PubMed Health

Results for “Polymers”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

PubMed2005

[Effect of synthesis conditions on the morphology and binding property of (-)-ephedrine imprinted polymers].

Contribution of the synthesis parameters to the properties of the polymer is one of the major interests in the study of molecular imprinting technology. To have a better understanding of the influence of polymerization conditions on the polymer morphology and binding property, (-)-ephedrine imprinted polymers synthesized with different cross-linkers (ethylene glycol dimethacrylate (EDMA) and pentaerythritol triacrylate (PETRA)), porogens (chloroform and acetonitrile) and monomer concentrations were compared. The resulting polymers were characterized with their pore structure, texture and binding affinities by BET and equilibrium adsorption method. The selectivity of the polymer was evaluated with chromatographic analysis. The results suggested that CHCl3 is a good solvent for methacrylic acid (MAA)-EDMA and MAA-PETRA polymer chains which resulted in smaller polymer surface area. Quantitative determinations of the carboxyl groups in the polymer indicated that polymers synthesized with the same pre-polymerization composition except porogen can have different concentrations of functional monomer in their structures. The study showed that porogen in the molecular imprinting synthesis can affect the morphology and composition of the polymers, which influence the binding affinity of the polymers.

Acetonitriles↗

PubMedDate not supplied

Interaction of natural and synthetic albumin polymers with hepatocytes.

The hepatitis B virus binds avidly to albumin polymers which in turn may mediate the initial binding of viral particles to the liver cell. However, the interaction of albumin polymers with the liver remains poorly characterized, and the possibility that hepatic binding reflects an artifact of polymerization with glutaraldehyde has not been excluded. We therefore characterized the binding of 125I-labeled natural and synthetic albumin polymers to suspensions of rat hepatocytes. Saturable binding was demonstrated for all preparations of monomeric and polymeric albumin studied. Glutaraldehyde-polymerized albumin (mean polymerization number = 15) bound much more avidly than naturally occurring albumin polymers (mostly dimers and trimers) or monomeric albumin. Competition between monomer and synthetic polymer was not observed. Reduction of free aldehyde groups on the synthetic polymer decreased nonsaturable binding without affecting saturable binding. Autoradiography confirmed binding of polyalbumin to hepatic parenchymal cells. Glutaraldehyde-polymerized ovalbumin, a protein unrelated to serum albumin, also bound hepatocytes saturably. We conclude that hepatic binding of synthetic albumin polymers is not due to residual aldehyde groups on the polymer and is much more avid than for natural polymer. This difference may reflect the higher degree of polymerization or chemical modification of the synthetic polymer. The hepatic binding sites for synthetic polymer appear distinct from those previously described for monomeric albumin and may not be specific for albumin.

Animals↗

PubMed2005

Photo-immobilization of a phospholipid polymer for surface modification.

A photo-reactive polymer having a phospholipid polar group was prepared, and the polymer was photo-immobilized on polymeric surfaces, where its interactions with biocomponents were investigated. By using a photo-immobilization method, the polymer was used for surface modification of polyethylene and polypropylene, polymers whose surfaces were not treated in our previous development of the phosphorylcholine-derived polymer. The photo-reactive polymer was synthesized by a coupling reaction involving copolymer consisting of 2-methacryloyloxyethyl phosphorylcholine and methacrylic acid with 4-azidoaniline. When the polymer was unpattern immobilized on the surface, X-ray photo-electron spectroscopic analysis and static contact angle measurements were performed. It was shown that the surface was covered with phospholipid polar groups. Micropattern immobilization was carried out using a micropatterned photo-mask. Measurements using atomic force microscopy showed that the swelled micropatterned polymer was five times as thick as the dried one. Protein adsorption and platelet adhesion were reduced on the polymer-immobilized regions. Mammalian cells did not adhere, and formed aggregates on the immobilized regions. In conclusion, the photo-reactive phospholipid polymer was covalently immobilized on the conventional polymer surfaces and it tended to reduce interactions with proteins and cells.

Adsorption↗

PubMed2003

Polymer surfactant kinetics using surface plasmon resonance spectroscopy dodecyltrimethylammonium chloride/polyacrylic acid system.

Kinetics of polymer surfactant interactions and the effect of surfactant binding on the conformational dynamics of the polymer were explored in this work using surface plasmon resonance spectroscopy. Polyacrylic acid was modified with thiol to varying degrees so as to force the polymer to form different loop sizes upon adsorption on the gold SPR sensor surface. Dodecyltrimethylammonium chloride in solution was flowed over the polymer-coated sensor surface and the binding was followed in real time. It was found that control of the loop size of the polymer on the solid surface enabled in turn the control of surfactant binding, with the largest loop allowing the maximum amount of surfactant to bind and vice versa. The kinetic plot of the binding showed three distinct segments. The first segment followed convective-diffusive kinetics. The second and third segments followed first-order kinetics with the second rate being significantly faster than the first one. Careful analysis of the second segment showed that it is possible to divide it into two different segments, each following a first-order kinetics, with the second rate being slightly slower than the first one suggesting a gradual slow down of the reaction due to convolution from the polymer conformational changes. Mechanistically, the sudden increase in the rate for the third segment of surfactant binding implies that the polymer matrix is opening up so as to incorporate more surfactant molecules. This was attributed to the formation of charged double surfactant species the repulsive interaction of which prevented the polymer network from imploding. Studies using unmodified polymers suggested the possibility of sudden conformational rearrangement in the polymer network, with progress in surfactant binding. Furthermore, the reflectance of the SPR spectrum was found to increase upon surfactant binding, implying that there is a decreased efficiency of coupling of the incident radiation into the surface plasmon mode of the metal, which suggests that the surfactant actually penetrated the polymer matrix.

Journal Article↗

PubMed1995

Absorption of lactose, glucose polymers, or combination in premature infants.

STUDY OBJECTIVE: To determine the digestion and absorption of lactose, a combination of lactose and glucose polymers, and glucose polymers alone in infants born at 28 to 42 weeks of gestation. DESIGN: Each infant received the three carbohydrate solutions (85 gm/L concentration) in random order. SETTING: Tertiary care urban children's hospital. INTERVENTIONS: A double-lumen perfusion catheter was placed in the duodenum-jejunum. Absorption was defined as the disappearance of the carbohydrate and all its components (e.g., for lactose: galactose, glucose). MEASUREMENTS AND MAIN RESULTS: Absorption of lactose was less than that of the lactose-glucose polymer combination and the glucose polymers alone. There was no relationship between lactose absorption and postnatal age, whereas absorption of the lactose-glucose polymer combination and the glucose polymers alone correlated with age. Lactose absorption was not related to the number of days that the infants received full-strength feedings or the total number of days of feeding before the study, whereas absorption of both the lactose-glucose polymer combination and the glucose polymers alone was related to both. Absorption of the three solutions was not related to gestational age or to the number of days before the initial feeding. Lactose absorption was greater in infants who received formula alone than in infants fed formula together with human milk. CONCLUSIONS: Premature infants do not digest and absorb lactose as well as glucose polymers. However, lactose does not impair the absorption of glucose polymers. Lactose assimilation is not affected by maturation, but the type of diet may affect lactose digestion and absorption. In contrast, digestion and absorption of glucose polymers are related to both postnatal age and diet.

Absorption↗

PubMed1992

Formation of urothelial structures in vivo from dissociated cells attached to biodegradable polymer scaffolds in vitro.

The use of autologous urothelium would be advantageous for urothelial replacement in many genitourinary reconstructive procedures. Urothelial tissue grafts might be created using isolated populations of transitional epithelium or tissue in concert with an appropriate synthetic substrate. We describe the results of experiments designed to determine the feasibility of using biodegradable polymers as delivery vehicles for the creation of new urothelial structures in vivo from dissociated cells. Primary cultures enriched in uroepithelial cells were obtained from New Zealand white rabbits using a new technique of cell harvest. Cells were seeded onto nonwoven meshes of polyglycolic acid polymers in culture and, after 1 to 4 days in vitro, the cell-polymer scaffolds were implanted into the mesentery, omentum or retroperitoneum of athymic mice. Polymers implanted without cells served as controls. Animals were sacrificed at 5, 10, 20 and 30 days after implantation and 75 implants were examined histologically. Ten days after implantation isolated single cell layers were seen lining the polymer fibers. At 20 and 30 days polymer degradation was evident and urothelial cells lined the polymer in continuous layers of 1 to 3-cell thickness. Anticytokeratin western blots demonstrated the presence of a urothelium-associated cytokeratin in cell-polymer implants recovered after 30 days. These results demonstrate that urothelial cells can be successfully harvested, survive in culture and attach to artificial biodegradable polymers. The urothelial-polymer scaffolds can be implanted into host animals and the implanted cells can achieve spatial orientation as the polymer undergoes biodegradation. These findings suggest that it may be possible to use autologous urothelium, reconfigured on a synthetic substrate, in reconstructive procedures involving the ureter, bladder and urethra.

Animals↗

PubMed2003

Coupling thermal field-flow fractionation with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the analysis of synthetic polymers.

Thermal field-flow fractionation (ThFFF) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) have been coupled to yield a powerful combination of techniques for polymer analysis. Thermal FFF's high molecular weight (MW) selectivity and sensitivity to chemical composition are used to separate polydisperse polymers and polymer mixtures into the narrow polydispersity and homogeneous chemical composition fractions essential for MALDI-TOFMS analyses. On the other hand, MALDI-TOFMS's ability to directly measure molecular weight alleviates the need for polymer standards for ThFFF. In this first-time coupling of ThFFF and MALDI-TOFMS, compatibility issues were addressed and optimum conditions and procedures were identified and developed to maximize the capabilities of the combined technique. Depending on the polymer MW and the method of MALDI sample deposition, fractions from 1-10 ThFFF runs were combined for MALDI-TOFMS analysis. Binary solvents were used to enhance ThFFF retention and resolution of low-MW (<15-kDa) polymers, and methods were developed to allow routine MALDI-TOFMS analyses of polystyrene polymers up to 575 kDa. Overall, the MW compatibility of the two techniques was extended from several kilodaltons to several hundred kilodaltons. Polymer fractions were collected after separation by ThFFF and analyzed either by MALDI-TOFMS or reinjection into the ThFFF system. Good agreement was observed between the MW distribution data obtained by MALDI-TOFMS and ThFFF. The application of ThFFF/MALDI-TOFMS to polydisperse polymers and polymer mixtures was demonstrated. This combined technique was also shown to be a viable means for preparing standards from the original polymer sample.

Journal Article↗

PubMed2006

Stamping patterns of insulated gold nanowires with self-organized ultrathin polymer films.

A thermal contact transfer technique is presented for the fabrication of nanoscaled to microscaled patterns of polymer-insulated metal structures on ceramic surfaces using metal-coated, thermoplastic stamps. The thermally activated formation of polymer-metal-polymer (PMP) heterostructures occurs spontaneously when a metal-coated thermoplastic stamp is compressed against a ceramic substrate and subsequently heated. The presented technique exploits the dynamics of ultrathin polymer films localized at interfaces and interfacial forces to prompt local reorganization of polymer stamp materials during processing. Intercalation of polymer stamp materials into the metal-substrate interface yields a cohesive polymer layer that binds the metal layer to the substrate. Disproportionate adhesion between the bulk polymer and the polymer layer at the stamp-metal interface leaves a capping layer upon separation of the stamp from the substrate. Here we demonstrate this technique with single use, bilevel polymer stamps which afford transfer of two distinct general products. The transfer of insulated submicrometer wide wires from the raised stamp features affords patterns of trilayered PMP structures with uniform wire dimensions. Concomitant transfer from the recessed stamp features allows fabrication of multilayered PMP architectures with sub-100 nm spacing from microstructured polymer stamps. Thus, patterns with two different insulated nanowire widths are readily fabricated in a single stamping process. A variety of ceramic substrates, thermoplastic materials, and metals can be used; e.g., inexpensive gold-coated CD or DVD media can be used as stamps, where the combination of materials dictates the relative interfacial forces and the processing parameters.

Journal Article↗

PubMed2004

Oil core-polymer shell microcapsules prepared by internal phase separation from emulsion droplets. I. Characterization and release rates for microcapsules with polystyrene shells.

Microcapsules with an oil core surrounded by a polymeric shell have been prepared by the controlled phase separation of polymer dissolved within the oil droplets of an oil-in-water emulsion. The dispersed oil phase consists of the shell polymer (polystyrene), a good solvent for the polymer (dichloromethane), and a poor solvent for the polymer (typically hexadecane). Removal of the good solvent results in phase separation of the polymer within the oil droplets. If the three interfacial tensions between the core oil, the shell-forming polymer, and the continuous phase are of the required relative magnitudes, a polymer shell forms surrounding the poor solvent. A UV-responsive organic molecule was added to the oil phase, prior to emulsification, to investigate the release of a model active ingredient from the microcapsules. This molecule should be soluble in the organic core but also have some water solubility to provide a driving force for release into the continuous aqueous phase. As the release rate of the active ingredient is a function of the thickness of the polymeric shell, for controlled release applications, it is necessary to control this parameter. For the preparative method described here, the thickness of the shell formed is directly related to the mass of polymer dissolved in the oil phase. The rate of volatile solvent removal influences the porosity of the polymer shell. Rapid evaporation leads to cracks in the shell and a relatively fast release rate of the active ingredient. If a more gentle evaporation method is employed, the porosity of the polymer shell is decreased, resulting in a reduction in release rate. Cross-linking the polymer shell after capsule formation was also found to decrease both the release rate and the yield of the active ingredient. The nature of the oil core also affected the release yield.

Journal Article↗

PubMed2006

Flocculation mechanism induced by cationic polymers investigated by light scattering.

Three cationic polymers with molecular weights and charge densities of 3.0 x 10(5) g/mol and 10%, 1.1 x 10(5) g/mol and 40%, and 1.2 x 10(5) g/mol and 100% were chosen as flocculants to aggregate silica particles (90 nm), under various conditions, including change in polymer dosage, particle concentration, background electrolyte concentration, and shear rate. The size and structure of flocs produced were determined using the static light scattering technique. On the basis of measurements of polymer adsorption and its effect on the zeta potential and floc properties, it has been found that the polymer charge density plays an important role in determining the flocculation mechanism. Polymers with a 10% charge density facilitate bridging, 40% charged polymers bring about either a combination of charge neutralization and bridging or bridging, depending on the polymer dosage, and polymers with the charge density of 100% induce electrostatic patch flocculation mechanism at the optimum polymer dosage and below but bring about bridging mechanism at the polymer dosage approaching the adsorption plateau value. Bridging aggregation can readily be affected by the particle concentration, and an increase in particle concentration results in the formation of larger but looser aggregates, whereas electrostatic patch aggregation is independent of particle concentration. The addition of a background electrolyte aids in bridging aggregation while it is detrimental to electrostatic patch aggregation. It has also been found that the effect of shear rate on the mass fractal dimension depends on polymer charge density.

Journal Article↗

PubMed2004

Structural investigations of polymer electrolyte poly(propylene oxide)-LiClO4 using diffraction experiments and reverse Monte Carlo simulation.

The structure of an amorphous polymer electrolyte, poly(propylene oxide) (PPO) complexed with LiClO4, has been studied using reverse Monte Carlo (RMC) simulations. The simulations require no force field but are based on experimental data only, in this case from x-ray and neutron diffraction experiments. Excellent agreement between the experimental data and the structures resulting from the RMC simulation is obtained. Samples with ether-oxygen to lithium concentrations (molar ratios) O:Li=16:1 and 5:1 were studied and compared to results of pure PPO from a previous study. We focus on the effects of the solvated salt on the structure of the polymer matrix, the spatial distribution of ions, and the correlations between the anions and the polymer chains. Analyzing the structures produced in the simulations, we find that for a concentration 16:1, the interchain distance is approximately the same as in pure PPO but more well defined. For a concentration 5:1, we find a larger and less well-defined interchain distance compared to the 16:1 concentration. This signifies that at the 16:1 salt concentration, there is enough free volume in the polymer host to accommodate the ions, and that the solvation of salt induces ordering of the polymer matrix. At the higher salt concentration 5:1, the polymer network must expand and become less ordered to host the ions. We also note, in accordance with previous studies, that the solvation of salt changes the conformation of the polymer chain towards more gauche states. The simulations furthermore reveal marked correlations between the polymer chains and the anions, which we suggest arise predominantly from an interaction mediated via cations, which can simultaneously coordinate both ether oxygens in the polymer chains and anions. Interanionic distances at 5 A, which are consistent with two or more anions being coordinated around the same cation, are also observed. On a larger scale, the RMC structure of PPO-LiClO4 16:1 clearly indicates the presence of salt-rich and salt-depleted domains having a length scale of <20 A. In view of such a heterogeneous structure of PPO-LiClO4 16:1, it is plausible that the increased ordering of the polymer matrix is due to rather well-defined structural arrangements within the salt-rich domains, and that the characteristic interchain distance in the salt-rich domains is similar to that of the pure polymer.

Journal Article↗

PubMed2001

Cultured chondrocytes produce injectable tissue-engineered cartilage in hydrogel polymer.

The purpose of this study was to determine if chondrocytes cultured through several subcultures at very low plating density would produce new cartilage matrix after being reimplanted in vivo with or without a hydrogel polymer scaffold. Chondrocytes were initially plated in low-density monolayer culture, grown to confluence, and passaged four times. After each passage cells were suspended in purified porcine fibrinogen and injected into the subcutaneous space of nude mice while simultaneously polymerizing with thrombin to reach a final concentration of 40 million cells/cc. Controls were made by injecting fresh, uncultured cells with fibrin polymer and by injecting the cultured cells in saline (without polymer). All samples were harvested at 6 weeks. When injected in polymer, both fresh cells and cells that had undergone only one passage in culture produced cartilaginous nodules. Cultured cells did not produce cartilage, regardless of length of time spent in culture, when injected without polymer. Cartilage was also not recovered from samples with cells kept in culture for longer than one passage, even when provided with a polymer matrix. All samples harvested were subjected to histological analysis and assayed for total DNA, glycosaminoglycan (GAG), and type II collagen. There was histological evidence of cartilage in the groups that used fresh cells and cultured cells suspended in fibrin polymer that only underwent one passage. No other group contained areas that would be consistent with cartilage histologically. All experimental samples had a higher percent of DNA than native swine cartilage, and there was no statistical difference between the DNA content of the groups containing cultured or fresh cells in fibrin polymer. Whereas the GAG content of native cartilage was 8.39% of dry weight and fresh cells in fibrin polymer was 12.85%, cultured cells in fibrin polymer never exceded the 2.48% noted from first passage cells. In conclusion, this study demonstrates that porcine chondrocytes that have been cultured in monolayer for one passage will produce cartilage in vivo when suspended in fibrin polymer.

Animals↗

PubMed2002

Synthesis, biodegradability, and biocompatibility of lysine diisocyanate-glucose polymers.

The success of a tissue-engineering application depends on the use of suitable biomaterials that degrade in a timely manner and induce the least immunogenicity in the host. With this purpose in mind, we have attempted to synthesize a novel nontoxic biodegradable lysine diisocyanate (LDI)- and glucose-based polymer via polymerization of highly purified LDI with glucose and its subsequent hydration to form a spongy matrix. The LDI-glucose polymer was degradable in aqueous solutions at 37, 22, and 4 degrees C, and yielded lysine and glucose as breakdown products. The degradation products of the LDI-glucose polymer did not significantly affect the pH of the solution. The physical properties of the polymer were found to be adequate for supporting cell growth in vitro, as evidenced by the fact that rabbit bone marrow stromal cells (BMSCs) attached to the polymer matrix, remained viable on its surface, and formed multilayered confluent cultures with retention of their phenotype over a period of 2 to 4 weeks. These observations suggest that the LDI-glucose polymer and its degradation products were nontoxic in vitro. Further examination in vivo over 8 weeks revealed that subcutaneous implantation of hydrated matrix degraded in vivo three times faster than in vitro. The implanted polymer was not immunogenic and did not induce antibody responses in the host. Histological analysis of the implanted polymer showed that LDI-glucose polymer induced a minimal foreign body reaction, with formation of a capsule around the degrading polymer. The results suggest that biodegradable peptide-based polymers can be synthesized, and may potentially find their way into biomedical applications because of their biodegradability and biocompatibility.

Biocompatible Materials↗

PubMed1991

Surface polymers of the nematode-trapping fungus Arthrobotrys oligospora.

The nematophagous fungus Arthrobotrys oligospora captures nematodes using adhesive polymers present on special hyphae (traps) which form a three-dimensional network. To understand further the adhesion mechanisms, A. oligospora surface polymers were visualized by transmission electron microscopy and characterized by chemical methods. Both traps and hyphae were surrounded by a fibrillar layer of extracellular polymers which stained with ruthenium red. The polymer layer was resistant to most of the chemicals and enzymes tested. However, part of the layer was removed by sonication in a Tris-buffer or by extraction in a chaotropic salt solution (LiCl), and the structure of the polymers was modified by treatment with Pronase E. Chemical analysis showed that the crude extracts of surface polymers removed by sonication or LiCl solution contained neutral sugars, uronic acids and proteins. Gel chromatography of the extracts revealed that the major carbohydrate-containing polymer(s) had a molecular mass of at least 100 kDa, containing neutral sugars (75% by weight, including glucose, mannose and galactose), uronic acids (6%) and proteins (19%). There was more polymer in mycelium containing trap-bearing cells than in vegetative hyphae. SDS-PAGE of the extracted polymers showed that the trap-forming cells contained at least one protein, with a molecular mass of approx. 32 kDa, not present on vegetative hyphae. Examining the capture of nematodes by traps of A. oligospora in which the layer of surface polymers was modified, or removed by chemical or enzymic treatments, showed that both proteins and carbohydrate surface polymers were involved in the adhesion process.

Animals↗

PubMed2005

Electro-optics and structural peculiarities of liquid crystal-nanoparticle-polymer composites.

The structural peculiarities and electro-optic performance of liquid crystal (LC)-colloidal nanoparticle (NP)-polymer (P) composites formed by photoinduced phase separation are considered. We classify these materials under two groups according to two limiting cases of polymer morphology. The first group corresponding to small polymer concentration comprises LCs filled with NPs that are stabilized with a polymer network. It is found that, in addition to the light scattering caused by the LC orientational defects, the refractive index mismatch between LC and NP aggregates may significantly affect the electro-optic contrast and its angular characteristics. The second group is represented by polymer dispersed liquid crystals (PDLCs) filled with NPs. It is established that, in the process of photoinduced phase separation of the LC-NP-prepolymer mixture, the nanoparticles are mainly involved with the polymer, serving as building blocks for the polymer matrix. When the aggregation rate of the NPs is high or their size is large, the NPs enhance light scattering in the polymer. For low aggregation rate, NPs modify the effective refractive index and/or the absorption coefficient of the polymer phase without producing any noticeable optical inhomogeneity. Additionally, we found that TiO2 NPs may cause a photochromic effect, which manifests itself in color changes in the course of the photoinduced phase separation. For PDLCs with optically transparent polymer matrices modified by NPs, it is shown that doping with NPs can be used to control the refractive index ratio of the LC and polymer. In this way one can modify the contrast and substantially reduce the off-axis haze of the PDLC. The observed effects show LC-NP-P composites as materials of considerable promise for LCD and other electro-optic applications.

Journal Article↗

PubMed2006

Formalism for calculation of polymer-solvent-mediated potential.

A simple theoretical approach is proposed for calculation of a solvent-mediated potential (SMP) between two colloid particles immersed in a polymer solvent bath in which the polymer is modeled as a chain with intramolecular degrees of freedom. The present recipe is only concerned with the estimation of the density profile of a polymer site around a single solute colloid particle instead of two solute colloid particles separated by a varying distance as done in existing calculational methods for polymer-SMP. Therefore the present recipe is far simpler for numerical implementation than the existing methods. The resultant predictions for the polymer-SMP and polymer solvent-mediated mean force (polymer-SMMF) are in very good agreement with available simulation data. With the present recipe, change tendencies of the contact value and second virial coefficiency of the SMP as a function of size ratio between the colloid particle and polymer site, the number of sites per chain, and the polymer concentration are investigated in detail. The metastable critical polymer concentration as a function of size ratio and the number of sites per chain is also reported for the first time. To yield the numerical solution of the present recipe at less than on a personal computer, a rapid and accurate algorithm for the numerical solution of the classical density functional theory is proposed to supply rapid and accurate estimation of the density profile of the polymer site as an input into the present formalism.

Journal Article↗

PubMed2006

Distortion and unwinding of the helical structure in polymer-stabilized short-pitch ferroelectric liquid crystal.

We report the effect of an anisotropic polymer network formed from an achiral photoreactive monomer in a short-pitch chiral SmC* phase on the distortion and the unwinding of the helical structure of the ferroelectric phase. The electro-optical behaviour and ferroelectric properties were experimentally determined for films containing various polymer concentrations. The critical field, E(u), for the transition from the distorted structure to the homogeneous state was measured as a function of polymer concentration. A linear increase of E(u) versus polymer concentration was observed, showing that the helical structure of the short-pitch SmC* phase was stabilized by the polymer network. This behaviour was expected to be a consequence of the increase of the apparent elastic constants of the ferroelectric liquid crystal stabilized by the anisotropic polymer network films. The polymer network morphology was investigated using atomic-force microscopy, revealing a twisted structure of the polymer fibers. This twisted structure was transferred onto a polymer network during the polymerization process within a short-pitch SmC* phase. The increase of the apparent elasticity can then be interpreted by a strong interaction between polymer network and the liquid-crystal molecules. From our experimental data, the coupling coefficient, W(p), characterizing this interaction was evaluated for all studied polymer concentrations.

Journal Article↗

PubMed2003

Etanidazole-loaded microspheres fabricated by spray-drying different poly(lactide/glycolide) polymers: effects on microsphere properties.

In this work, a spraying technique was used to encapsulate etanidazole (a hypoxic radiosensitizer) into different poly(lactide/glycolide) polymers. The properties of the obtained microspheres, especially the particle size and distribution, morphology and release rate were investigated. Unexpectedly, poly(L-lactide) (PLLA) shows a fast release rate, comparable to PLGA 50: 50, due to the dissociation of the microspheres although the release rate of the spray-dried microspheres of other polymers decreases with increasing lactide ratio. It is also interesting to note that, contrary to the viscosity sequence of the polymer solutions, the particle size of the microspheres decreases in the order PLGA 50: 50, PLGA 65: 35, PLGA 85: 15 and PDLA. The morphology of microspheres can be affected by polymer properties (e.g. lactide/glycolide ratio, molecular weight, crystallinity and Tg) and fabrication conditions (e.g. solvent and polymer concentration to be sprayed). Although most of the microspheres fabricated by EA have a donghnut-like shape with smooth surface, it is possible to obtain spherical particles by choosing proper polymer type and polymer concentration. A further examination of the mechanisms of the atomization process and the solvent evaporation process reveals their respective effect on droplet formation and particle formation, both of which are essential for the spray-drying technique. It is found that polymer phase transition (affected by the polymer solubility) and its subsequent solvent evaporation processes can finally determine the morphology and the particle size of the spray-dried particles made from different polymers. In essence, the lactide/glycolide ratio of the polymers plays a more important role in affecting the properties of the spray-dried microspheres.

Biocompatible Materials↗