PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Polystyrenes”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
PubMed1999

Napalm as an energy resource: a study of the molecular weight distribution of polystyrene in napalm and its use in middle distillate fuels.

The large quantity of napalm that is currently being treated as hazardous waste represents a viable energy resource that is too valuable to waste. However, there are significant problems to be overcome before this material can be used as an energy source. The scientific and environmental problems include: the broad molecular weight distribution of polystyrene, solubility and compatibility in a fuel matrix, methods to ensure complete combustion, high benzene concentration, low flash point due to the presence of gasoline, and safety in transportation and handling. In this paper, we present data on the molecular weight distribution of the polystyrene present in the napalm mixture, extraction of the gasoline and benzene from napalm, solubility of napalm in middle distillate fuels, simulated burner characteristics of napalm fuel mixtures, and accelerated storage stability studies of napalm fuel mixtures.

Journal Article↗
PubMed2003

Characterization and relative ionization efficiencies of end-functionalized polystyrenes by matrix-assisted laser desorption/ionization mass spectrometry.

The properties and relative ionization efficiencies of a series of polystyrenes (PS) with hydroxyl, hydrogen, tertiary amine, and quaternary amine end-functionalities were examined by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). The hydrogen and hydroxyl functionalized PS ionized via attachment of a single Ag(+) cation, as expected. However, tertiary amine PS oligomers were found in (M - H)(+) and (M + H)(+) forms, in addition to M + Ag(+), while the quaternary amine PS oligomers only ionized to the M(+) form. Analysis of tertiary amine PS spectra revealed varying ratios of the three ionic forms depending on the oligomer length, pointing to a change in ionization efficiency. When the bulk samples were compared, the quaternary amine end-functionalized PS gave a ten-fold higher ionization efficiency over all others studied, likely because of the preexisting charge on the functionality. Samples with hydroxyl and hydrogen functionalities had similar ionization efficiencies, with the tertiary amine slightly higher, depending on the molecular weight. Changes in molecular weight affected the relative ionization efficiencies in varying fashion depending on the end functionality, though average molecular weight measurements were largely unaffected by end-functionality. Quantification of end-functionalized polystyrenes with different ionization efficiencies was found to be possible if due care was taken.

Journal Article↗
PubMed2005

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry interlaboratory comparison of mixtures of polystyrene with different end groups: statistical analysis of mass fractions and mass moments.

A matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) interlaboratory comparison was conducted on mixtures of synthetic polymers having the same repeat unit and closely matching molecular mass distributions but with different end groups. The interlaboratory comparison was designed to see how well the results from a group of experienced laboratories would agree on the mass fraction, and molecular mass distribution, of each polymer in a series of binary mixtures. Polystyrenes of a molecular mass near 9000 u were used. Both polystyrenes were initiated with the same butyl initiator; however, one was terminated with -H (termed PSH) and the other was terminated with -CH2CH2OH (termed PSOH). End group composition of the individual polymers was checked by MALDI-TOF MS and by nuclear magnetic resonance (NMR). Five mixtures were created gravimetrically with mass ratios between 95:5 and 10:90 PSOH/PSH. Mixture compositions where measured by NMR and by Fourier transform infrared spectrometry (FT-IR). NMR and FT-IR were used to benchmark the performance of these methods in comparison to MALDI-TOF MS. Samples of these mixtures were sent to any institution requesting it. A total of 14 institutions participated. Analysis of variance was used to examine the influences of the independent parameters (participating laboratory, MALDI matrix, instrument manufacturer, TOF mass separation mode) on the measured mass fractions and molecular mass distributions for each polymer in each mixture. Two parameters, participating laboratory and instrument manufacturer, were determined to have a statistically significant influence. MALDI matrix and TOF mass separation mode (linear or reflectron) were found not to have a significant influence. Improper mass calibration, inadequate instrument optimization with respect to high signal-to-noise ratio across the entire mass range, and poor data analysis methods (e.g., baseline subtraction and peak integration) seemed to be the greatest obstacles in the correct application of MALDI-TOF MS to this problem. Each of these problems can be addressed with proper laboratory technique.

Journal Article↗
PubMedDate not supplied

Structural transformation of cytochrome c and apo cytochrome c induced by sulfonated polystyrene.

The structural transformation of cytochrome c (cyt c) and its heme-free precursor, apo cyt c, induced by negatively charged sulfonated polystyrene (SPS) with different charge density (degree of sulfonation) and chain length was studied to understand the factors that influence the folding and unfolding of the protein. SPS forms stable transparent nanoparticles in aqueous solution. The hydrophobic association of the backbone chain and phenyl groups is balanced by the electrostatic repulsion of the sulfonate groups on the particle surface. The binding of cyt c to negatively charged SPS particles causes an extensive disruption of the native compact structure of cyt c: the cleavage of Fe-Met80 ligand, about 40% loss of the helical structure, and the disruption of the asymmetry environment of Trp59. On the other hand, SPS particle-bound apo cyt c undergoes a conformational change from the random coil to alpha-helical structure. The folding of apo cyt c in SPS particles was influenced by pH and ionic strength of the solution, SPS concentration, and the degree of sulfonation and chain length of SPS. The folding can reach more than 90% of the alpha-helix content of native cyt c in solution. Poly(sodium 4-styrenesulfonate) (PSS), which is 100% sulfonated polystyrene and cannot form hydrophobic cores in the solution, induces only two-thirds of the alpha-helix content compared with SPS. It appears that the electrostatic interaction between PSS/SPS and apo cyt c induces an early partially folded state of apo cyt c. The hydrophobic interaction between nonpolar residues in apo cyt c and the hydrophobic cores in SPS particles extends the alpha-helical structure of apo cyt c.

Animals↗
PubMed2006

Layer-by-layer deposition of bimetallic nanoshells on functionalized polystyrene beads.

Bimetallic nanoshells on functionalized polystyrene beads have been fabricated through a layer-by-layer deposition technique exploiting electrostatic interaction. The synthesis has been achieved through the immobilization and successive reduction of the corresponding precursor ions. It has been shown that the thickness of the shell can be controlled by a number of cyclic depositions of respective metals onto the surface of the polystyrene beads.

Journal Article↗
PubMed2003

Preparation, physical properties, on-bead binding assay and spectroscopic reliability of 25 barcoded polystyrene-poly(ethylene glycol) graft copolymers.

Here we describe the preparation of 25 beaded polystyrene-poly(ethylene glycol) graft copolymers from six spectroscopically active styrene monomers: styrene, 2,5-dimethylstyrene, 4-methylstyrene, 2,4-dimethylstyrene, 4-tert-butylstyrene, and 3-methylstyrene. These polymers were thoroughly characterized by Raman, infrared, and (1)H/(13)C NMR spectroscopies, and differential scanning calorimetry. Determination of the swelling properties, peptide synthesis, and on-bead streptavidin-alkaline phosphatase (SAP) binding assay further established that their physical and chemical properties where not significantly altered by the diversity of their encoded polystyrene core. Each of the 25 resins displayed a unique Raman and infrared vibrational fingerprint, which was converted into a "spectroscopic barcode". The position of each bar matches the peak wavenumber in the corresponding spectrum but is independent of its intensity. From this simplified representation similarity maps comparing 35 000 resin pairs were generated to establish the spectroscopic barcoding as a reliable encoding methodology. In effect, in 99% of the cases, the highest similarity coefficients were obtained for resin pairs prepared from the same styrene derivatives even after SAP binding assay. We have also shown that a small but unique combination of a resin's vibrations (30-40%) is sufficient for its identification. However, in rare cases where a resin's vibrational signature has been severely compromised, both the Raman and infrared barcodes were synergistically and reliably utilized to unequivocally identify its chemical make up.

Journal Article↗
PubMed2005

Quantifying adhesion bond parameters to distinguish interactions of hydrophilic and hydrophobic blocks of polystyrene-poly-2-vinylpyridine with a silicon nitride surface.

An analysis of the loading rate dependence of the forces required to rupture an AFM tip from a block copolymer surface has provided insight into the structure of the surface-macromolecule contact, differentiation of the block contacting the tip, a measure of the polymer-surface binding energy, and the rigidity of the contact. Polystyrene-poly-2-vinylpyridine block copolymers were studied adsorbing to silicon nitride. Polystyrene makes stiff van der Waals contact with the silicon nitride surface in aqueous solution, while the bond of poly-2-vinylpyridine to the surface is more flexible and may involve a bridging water.

Journal Article↗
PubMed2004

Spontaneous formation of an exfoliated polystyrene-clay nanocomposite using a star-shaped polymer.

Mixtures of five-arm star polystyrene with an organoclay spontaneously formed exfoliated nanocomposites when annealed, validating a recent theoretical prediction by Singh and Balazs (Polym. Int. 2000, 49, 469.). An analogous linear polystyrene sample produced only an intercalated morphology under the same conditions. The nanocomposite morphologies were characterized by X-ray diffraction and transmission electron microscopy. These results suggest a general strategy for forming exfoliated nanocomposites in commodity polymers via melt compounding.

Journal Article↗
PubMed2006

Luminescent triarylborane-functionalized polystyrene: synthesis, photophysical characterization, and anion-binding studies.

A new class of highly fluorescent triarylborane polymers has been prepared from trimethylsilyl-substituted polystyrene via a modular approach that involves selective polymer modification reactions with organometallic reagents. The photophysical properties, environmental stability, and the Lewis acidity of the boron sites have been tailored through modifications in the substitution pattern on boron. The photophysical properties are indicative of electronic communication between the chromophores attached to polystyrene, which has been exploited for the efficient probing of fluoride and cyanide in the micromolar concentration range.

Journal Article↗
PubMed2005

Solvent relaxation study of pH-dependent hydration of poly(oxyethylene) shells in polystyrene-block-poly(2-vinylpyridine)-block-poly(oxyethylene) micelles in aqueous solutions.

The hydration of the poly(oxyethylene) shell in polystyrene-block-poly(2-vinylpyridine)-block-poly(oxyethylene) micelles was investigated by monitoring the solvent relaxation response of a solvent-sensitive fluorophore (patman). It has been found that the relaxation occurs on the nanosecond time scale. Results for triblock copolymer micelles have been compared with those obtained for polystyrene-block-poly(2-vinylpyridine) micelles in order to evaluate the effect of the outer polyoxyethylene layer. Considerable pH-dependent changes in the hydration of poly(oxyethylene) units at the poly(2-vinylpyridine)/polyoxyethylene interface were observed. Additionally, the paper shows that the solvent relaxation technique is a suitable tool for studying polymeric nanoparticles and that the measurement of time-dependent half-width of the emission spectrum allows for estimation of the extent of relaxation process observed by a given experimental setup.

Journal Article↗
PubMed2006

Local mechanical properties of plasma treated polystyrene surfaces.

We study how a local air plasma treatment affects the mechanical properties of polystyrene by performing indentation measurements on the polymer in the elastic and plastic regime. The local exposure to plasma was obtained by placing a shadow-mask with quadratic holes of 45 x 45 microm(2) on top of the polymer substrate, providing uncovered (exposed to the plasma) and covered (protected from the plasma) areas. We have analyzed quantitatively the topography and the elastic-plastic properties of such a sample with atomic force microscopy (AFM) measurements, both before and after plasma treatment. To enhance the differences between covered and uncovered areas, the sample has been exposed to solvent vapor. This generates regions which are differently swollen. The quantitative investigation of the mechanical properties of the swollen sample for different solvent exposure times gives further insight into the changes of polystyrene mechanical properties caused by the plasma.

Journal Article↗
PubMed2006

Transport behavior of oxygen and nitrogen through organasilicon-containing polystyrenes by molecular simulation.

Molecular dynamics (MD) simulations have been used to study the transport properties of oxygen and nitrogen in the para-substituted polystyrenes which possess one to four Si atoms in each substituent. The Condensed-phase Optimized Molecular Potentials for Atomistic Simulation Studies (COMPASS) force field was used to construct the polymers. Diffusion coefficients were obtained from molecular dynamics (NVT ensemble) with up to 3 ns simulation times. After molecular dynamic simulation, the trajectories of the small molecules in the polymer matrix were obtained. Then diffusion coefficients have been calculated from the Einstein relationship revealing a considerable agreement between the simulated and the experimental data. And solubility coefficients have been calculated by the Grand Canonical Monte Carlo (GCMC) method. The solubility of oxygen increased with increasing Si content in the polymer membrane. The para-substituted polystyrenes with a branched substituent at the alpha-position showed higher permeability than those of the nonbranched ones. The higher the glass transition temperature (T(g)) of the membrane, the larger the diffusion coefficients of oxygen and nitrogen obtained.

Journal Article↗
PubMed2004

Effect of poly(acrylic acid) block length distribution on polystyrene-b-poly(acrylic acid) block copolymer aggregates in solution. 2. A partial phase diagram.

The first paper of the series, which focused on the effect of polydispersity on the self-assembly of block copolymer vesicles, showed that an increase in the width of the poly(acrylic acid) (PAA) block length distribution resulted in a decrease in the size of the vesicles formed. In this paper, the rest of the phase diagram is explored. For the present study, a series of polystyrene-b-poly(acrylic acid) copolymers of an identical polystyrene length of 325 units but of varying degrees of polymerization of PAA was synthesized. Mixtures of the copolymers were made to artificially broaden the molecular weight distribution of PAA at a constant number average of 48 in the polydispersity index (PDI) range of 1.1-3.3. The mixtures were dissolved in dioxane, and water was added slowly to predetermined amounts. Transmission electron microscopy was used to observe aggregate morphologies at different water contents and PAA PDIs. At low water contents, dynamic light scattering was also used to measure the sizes of the aggregates. A partial phase diagram as a function of the water content and PAA PDI was obtained. Large compound micelles and spherical micelles (average diameter of 40 nm) were found at low water contents; however, at a water content of 12% (w/w), a continuum of morphologies from spheres to rods to vesicles was found with increasing PAA PDI. In addition, each copolymer was investigated by itself under identical conditions to those used for the mixtures to determine if there was any segregation of the individual polymers into separate aggregates. No evidence for such segregation was found.

Journal Article↗
PubMed2004

Synthesis of sterically stabilized polystyrene latex particles using cationic block copolymers and macromonomers and their application as stimulus-responsive particulate emulsifiers for oil-in-water emulsions.

2-(Dimethylamino)ethyl methacrylate (DMA) was block copolymerized with methyl methacrylate (MMA) using group transfer polymerization to give four AB diblock, ABA triblock, and BAB triblock copolymers of low polydispersity (Mw/Mn < 1.20). In addition, a near-monodisperse styrene-functionalized DMA-based macromonomer was synthesized via oxyanionic polymerization using a potassium 4-vinylbenzyl alcoholate initiator. These five well-defined, tertiary amine methacrylate-based copolymers were evaluated as steric stabilizers for the synthesis of polystyrene latexes via emulsion and dispersion polymerization. The most efficient steric stabilizers proved to be the DMA-MMA diblock copolymer and the DMA-based macromonomer. The polystyrene latexes were characterized in terms of their particle size and morphology, stabilizer content, surface charge, and surface activity using dynamic light scattering, scanning electron microscopy, 1H NMR spectroscopy, aqueous electrophoresis measurements, and surface tensiometry, respectively. The pH-dependent surface activity exhibited by selected latexes suggests potential applications as stimulus-responsive particulate emulsifiers for oil-in-water emulsions.

Journal Article↗
PubMed2005

Nonspherical assemblies generated from polystyrene-b-poly(L-lysine) polyelectrolyte block copolymers.

This report describes the aqueous solution self-assembly of a series of polystyrene(m)-b-poly(L-lysine)n block copolymers (m = 8-10; n = 10-70). The polymers are prepared by ring-opening polymerization of epsilon-benzyloxycarbonyl-L-lysine N-carboxyanhydride using amine terminated polystyrene macroinitiators, followed by removal of the benzyloxycarbonyl side chain protecting groups. The critical micelle concentration of the block copolymers determined using the pyrene probe technique shows a parabolic dependence on peptide block length exhibiting a maximum at n = approximately 20 (m = 8) or n = approximately 60 (m = 10). The shape and size of the aggregates has been studied by dynamic and static light scattering, small-angle neutron scattering (SANS), and analytical ultracentrifugation (AUC). Surprisingly, Holtzer and Kratky analysis of the static light scattering results indicates the presence of nonspherical, presumably cylindrical objects independent of the poly(L-lysine)n block length. This is supported by SANS data, which can be fitted well by assuming cylindrical scattering objects. AUC analysis allows the molecular weight of the aggregates to be estimated as several million g/mol, corresponding to aggregation numbers of several 10s to 100s. These aggregation numbers agree with those that can be estimated from the length and diameter of the cylinders obtained from the scattering results.

Journal Article↗
PubMed2006

Surface-anisotropic polystyrene spheres by electroless deposition.

Surfaces of sulfate-terminated polystyrene microspheres are anisotropically modified with silver nanoparticles covering 20-50% of the sphere surface using electroless deposition. A PDMS templating method is employed. Silver nanoparticles are found to deposit uniformly onto the exposed sphere surfaces. The deposition is diffusion-controlled and the nanoparticles adhere strongly to the polystyrene particles despite extensive exposure to ultrasonication. Silver content is confirmed by EDAX analysis. The final silver coverage is controlled via the PDMS pre-curing conditions.

Journal Article↗
PubMed2000

Synthesis of a triphenylphosphine reagent on non-cross-linked polystyrene support: application to the Staudinger/Aza-wittig reaction

A new triphenylphosphine reagent linked to a linear polystyrene was synthesized. The reactivity of this phosphine-bound polymer is superior to that of the phosphine bound to cross-linked polystyrene. The polymer reacted very rapidly with azides to generate iminophosphoranes which could then react with aldehydes to generate imines in good yields and high purities.

Journal Article↗