SEARCH · PubMed Health

Results for “Chlorine Compounds”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

PubMed1988

Brain metabolites of lindane and related isomers: identification by negative ion mass spectrometry.

The application of a new method of gas chromatography-mass spectrometry (GC-MS) to the study of some aspects of the metabolism of hexachlorocyclohexanes is presented. Instead of the classical mode of ionization (Electron Impact, EI), this method uses chemical ionization, recording only the negative ions produced. This enables a tremendous enhancement of the signal when chlorinated compounds elute from the chromatographic column. The mass spectra obtained consist generally in the ions corresponding to the molecular weight of the compound analyzed. The sensitivity of the method is higher than any other GC method described: the limit of detection of several organochlorine compounds can be as low as 60 femtograms. Using this method we have been able to identify several Lindane metabolites (tetra-, penta- and hexachlorocyclohexenes, tetra- and pentachlorobenzene) in rat brain homogenates without any purification step. Using this method, a quantitative study of the main metabolites found in brain after treatment with 4 different HCH isomers has been performed. This study reveals that the HCH isomers are cleared from the brain via different metabolic pathways, with a rate of production of metabolites which is inversely correlated to their half lives in brain.

Administration, Oral↗

PubMed1989

Carcinogenic activity associated with halogenated acetones and acroleins in the mouse skin assay.

Several chlorinated acetones have been identified in drinking water and these, as well as a number of chlorinated acroleins, are produced by chlorination of humic acid solutions. Many of these chlorinated compounds and the brominated acrolein analog were positive in the Ames Assay in the laboratory. To determine if carcinogenic activity was associated with these chemicals the following acetone derivatives: monochloro (MCA); 1,1-dichloro (1,1-DCA), 1,3-dichloro (1,3-DCA), 1,1,1-trichloro (1,1,1-TCA), 1,1,3-trichloro (1,1,3-TCA), and substituted acroleins: 2-chloro (CAC), 3,3-dichloro (DCAC), 2,3,3-trichloro (TCAC) and 2-bromo (BAC), were applied topically to SENCAR mice (25, 30, or 40/group) at the following dose levels: 50 mg/kg (MCA and 1,1,3-TCA); 50, 75 and 100 mg/kg (1,3-DCA); 100, 200 and 400 mg/kg (CAC, DCAC, and TCAC); 200 and 300 mg/kg (BAC); and 400, 600, and 800 mg/kg (1,1-DCA, and 1,1,1-TCA). Doses were applied six times over a 2-week period in 0.2 ml ethanol per application. 1,3-DCA was also tested with single doses of 37.5, 75, 150 and 300 mg/kg in 0.2 ml ethanol. Control animals received 0.2 ml ethanol per application as a single dose or multiple doses to match corresponding studies. Two weeks after the final dose, 1.0 microgram TPA in 0.2 ml acetone was applied three times weekly for 20 weeks. After 24 weeks the percentage of animals with tumors for dose groups above were: MCA (8); 1,1,3-TCA (10); 1,3-DCA, multiple doses (48, 45, 32); CAC (30, 28, 38); DCAC (3, 0, 0); TCAC (10, 5, 0); BAC (54, 43); 1,1-DCA (0, 5, 0); 1,1,1-TCA (10, 5, 0); 1,3-DCA, single doses (47, 47, 63, 20); controls (12--Table 3, 9--Table 4 average). These data show that 1,3-DCA, CAC and BAC, when applied topically, initiate tumors in the mouse skin. These chemicals administered orally in a 2% emulphor solution, at doses described in Table 3, did not initiate tumors in the mouse skin.

Acetone↗

PubMed1988

Modeling the tissue solubilities and metabolic rate constant (Vmax) of halogenated methanes, ethanes, and ethylenes.

Experimental solvent:air and tissue:air partition coefficients for 25 halogenated methanes, ethanes, and ethylenes in saline solution; olive oil; and rat blood, muscle, liver, and fat tissues have been examined using theoretical molecular modeling techniques. The metabolic rate constant, Vmax, was also investigated by these techniques for 19 chlorinated compounds in this group. Two graph theoretical approaches (the distance method of Wiener and the connectivity index method of Randic, Kier, and Hall) and an approach utilizing ad hoc molecular descriptors were employed. Satisfactory regression models for solubility were obtained with both the Randic-Kier-Hall approach and the ad hoc descriptors approach. Fluorine substituents decrease tissue solubilities, whereas both clorine and bromine substituents increase tissue solubilities, with the relative influence being Cl less than Br. Tissue solubilities can also be represented conveniently in terms of contributions from oil and saline solubilities, a procedure reinforced by factor analysis of the data. Equations derived by these methods adequately estimated the solubilities for eight additional compounds. No approach could successfully model Vmax for all 19 compounds, but a subset of 16 compounds was modeled using the connectivity indices. The equation is limited in its use but indicated future modeling directions for Vmax.

Adipose Tissue↗

PubMed1995

Liquid-gel partitioning using Lipidex in the determination of polychlorinated biphenyls, naphthalenes, dibenzo-p-dioxins and dibenzofurans in blood plasma.

A method was developed for the transfer of fat, polychlorinated biphenyls (PCBs), naphthalenes (PCNs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) from blood plasma into the lipophilic gel Lipidex 5000. Subsequent elution of the gel separated about 70% of the fat from the analytes. Different adsorbents and activated charcoal were applied for further purification of the sample and separation of analytes. Identification and determination of the chlorinated compounds were made by gas chromatography with electron-capture detection (GC-ECD) or gas chromatography-mass spectrometry (GC-MS). Recoveries were studied by addition of Halowax 1014 and different congeners of PCBs, PCNs, PCDDs and PCDFs to 50 ml of plasma. The mean recoveries of the individual compounds studied were 72-99%. By using the liquid-gel partitioning technique emulsions were avoided. Concentrations of lipids in plasma obtained by the present method agreed well with the concentrations obtained using liquid-liquid partitioning with chloroform-methanol.

Adipose Tissue↗

PubMed1989

Sexual behavior of intact female rats after treatment with o,p'-DDT or p,p'-DDT.

Sexual behavior of adult, female rats was tested following treatment with o,p'-DDT or with p,p'-DDT during either diestrus or proestrus. Both chlorinated compounds decreased lordosis behavior, but o,p'-DDT did so only after treatment on diestrus. p,p'-DDT in contrast, decreased sexual behavior under all treatment conditions. o,p'-DDT may have altered behavior by disrupting the estrous cycle while p,p'-DDT had a major effect on the female's proceptivity and receptivity without modifying vaginal cyclicity. p,p'-DDT disrupted sexual behavior at doses as low as 25 mg/kg while 100 to 200 mg/kg o,p'-DDT were required. Since commercially prepared DDT contained a predominant proportion of p,p'-DDT, these results suggest that many reproductive effects of DDT may have resulted from p,p'-DDT rather than from o,p'-DDT.

Animals↗

PubMed2004

Detoxification of hexachlorobenzene by dechlorination with potassium-sodium alloy.

Dechlorination of hexachlorobenzene (HCB) was achieved by a liquid potassium-sodium (K-Na)-alloy. HCB in a cyclohexane/benzene solution (22 mmol/l, 4.67 g/l as chlorine) was dechlorinated by almost 100% after a 30-min reaction, indicating high reactivity of K-Na alloy and high proton donating power of cyclohexane. Decreasing orders of chlorobenzenes identified after a 15-min reaction, by amount were 1,2,3,4->1,2,3,5->1,2,4,5- for tetrachlorobenzenes, 1,2,4->1,2,3->1,3,5- for trichlorobenzenes, and 1,4->1,3->1,2- for dichlorobenzenes. It was hypothesized that once one chlorine atom in HCB was replaced with a proton, the adjacent chlorine atom to the proton tended to be replaced with another hydrogen atom. A total of 63 PCBs formed via the Wurtz-Fittig reaction were identified as by-products in the sample after a 15-min reaction. Among PCBs found, 2,3',4',5-tetrachlorobiphenyl, which was a product from 1,2,4-trichlorobenzene formed via the Wurtz-Fittig reaction, was detected in relatively high concentration (48.9 nmol/ml). The sample obtained from a reaction mixture after 30 min contained only 14 PCBs in trace amounts, indicating that the PCBs formed were also further dechlorinated by K-Na alloy. Non-chlorinated compounds--such as methylbenzene, dimethylbenzene, dimer of tetrahydrofuran, and dicyclohexyl (dimer of cyclohexane)--were also identified in the samples. A method using K-Na alloy developed in the present study dechlorinated satisfactorily HCB at room temperature.

Alloys↗

PubMed2004

Cosolvent effect on the catalytic reductive dechlorination of PCE.

Reductive dechlorination of chlorinated organic contaminants is an effective approach to treat this widespread group of environmentally hazardous substances. Metalloporphyrins can be used to catalyze reduction reactions by shuttling electrons from a reducing agent (electron donor) to chlorinated organic contaminants, thus rendering them to non-chlorinated acetylene, ethylene or ethane as major products. Iron, nickel and vanadium oxide tetraphenyl porphyrins (TPPs) were used as models of non-soluble metalloporphyrins that are common in subsurface environments, and hence may inflect on the ability to use natural ones. The effect of cosolvents on metalloporphyrins is demonstrated to switch the reduction of tetrachlorethylene (PCE) from no reaction to complete PCE transformation within 24 h and the production of final non-chlorinated compounds. Variations in product distributions for the different metalloporphyrins indicate that changes in the core metal can influence reaction rates and effective pathways. Furthermore, different cosolvents can generate varied product distributions, again suggesting that different pathways and/or rates are operative in the reduction reactions. Comparison of different cosolvent effects on PCE reduction using vitamin B12--a soluble natural metalloporphyrinogen--as the catalyst shows less pronounced differences between reactions in various cosolvent solutions versus only aqueous solution.

Catalysis↗

PubMed2004

State-of-the art of selective detection and identification of I-, Br-, Cl-, and F-containing compounds in gas chromatography and liquid chromatography.

This review article presents an overview of halogen-specific detection in gas chromatography (GC) and liquid chromatography (LC). Attention is primarily focused on the use of plasma emission spectroscopy and plasma mass spectrometry as detectors, but other halogen-selective detection principles are also mentioned. Different instrumental configurations are discussed both with respect to technical set-up and performance, the principal reasons for halogen-selective detection are highlighted, and recent applications are reviewed from areas such as environmental chemistry, petroleum characterization, and drug analysis.

Animals↗

PubMed2006

Microwave-assisted extraction of organophosphate flame retardants and plasticizers from indoor dust samples.

A procedure for the determination of eight organophosphate flame retardants and plasticizers in dust samples is presented. Microwave-assisted extraction and gas chromatography (GC) with nitrogen-phosphorus detection (NPD) were used for sample preparation and analytes quantification, respectively. Influence of different variables (type and volume of organic solvent, temperature, time, agitation, etc.) on the yield of the extraction step was evaluated. The most important factor was the type of solvent, with the highest efficiencies corresponding to acetone. Under final conditions 10 mL of this solvent were employed. The extraction was carried out at 130 degrees C and satisfactory yields, similar to those obtained with the Soxhlet technique, were achieved. Due to the high content of organic carbon in dust samples, primary acetone extracts had to be subjected to intensive clean-up. Dilution with ultrapure water followed by concentration on a reversed-phase sorbent and further purification using silica, allowed a significant reduction of co-extracted interferences. Application of the developed methodology to indoor dust from private houses showed important concentrations of several organophosphate esters. The highest levels, up to 19 microg/g, corresponded to tris(butoxyethyl) phosphate; moreover, average values of two chlorinated compounds, used as flame retardants and considered as the most concerning species in the group, exceeded the 1 microg/g level.

Acetates↗

PubMed2005

Polychlorinated biphenyls in mountain pine (Pinus uncinata) needles from Central Pyrenean high mountains (Catalonia, Spain).

The polychlorobiphenyl (PCB) composition of pine needles of Pinus uncinata from the Pyrenean high mountains has been investigated. Samples from four altitudes (1750, 1950, 2150, and 2250 m above sea level) were collected in March 2002 and June 2002 in a central area near Lake Redon. The observed concentrations were similar to those found in pine trees from rural areas in Europe. A correlation between log-transformed PCB concentrations and reciprocal of absolute average air temperature was observed for all congeners studied except No. 28, the most volatile congener studied. The highest concentrations were found at the lowest temperatures. Phase-change enthalpies calculated from the slopes of the concentration-temperature dependencies showed a good agreement with the enthalpies of vaporization. The pine needle-atmosphere partition coefficients of the studied PCB congeners increased with higher degrees of compound chlorination and with lower average air temperatures. They exhibit a good linear relationship with log(K(oa)) but the temperature dependence was stronger for log(K(pa)) than log(K(oa)).

Altitude↗

PubMed2004

Assessment of the microbial integrity, sensu G.S. Wilson, of piped and bottled drinking water in the condition as ingested.

The second half of the 20th century witnessed substantial progress in the assurance and verification of microbiological integrity, i.e., safety and sensory quality, of drinking water. Enteropathogenic agents, such as particular viruses and protozoa, not previously identified as transmitted by industrially provided water supplies, were demonstrated to cause disease outbreaks, when ingested with piped water. The potential harm posed by carry-over of orally toxic metabolites of organisms, producing 'algal' (cyanophytic) blooms, was considered. In addition, earlier observations on the colonization of attenuated drinking water bodies by a variety of oligotrophic Gram-negative bacteria were confirmed and extended. This new evidence called for updating both water purification technologies and analytical methodology, serving to verify that goals had been attained. For the former purpose, the hazard analysis empowering control of critical practices (HACCP) strategy, introduced about 1960 in industrial food processing, was successfully adopted. Elimination, devitalization or barrier technologies for the more recently identified water-borne pathogens were elaborated, taking account of the hazard of production of chlorinated compounds with alleged adverse health effects. Biofilm formation throughout water distribution networks was brought under control by strict limitation of concentrations of compounds, assimilable by oligotrophic bacteria. Upon acknowledging that direct detection tests for pathogens were futile, because of their most sporadic and erratic distribution, Schardinger's marker organism concept was anew embraced, rigorously revised and substantially enlarged. Misleading designations, like searches for 'faecal coliforms' were replaced by boundary testing for Escherichia coli and appropriate Enterococcus spp. In addition, though still to be perfected, detection protocols for relevant bacteriophages or index viruses and, to a certain extent, also for spores of aerobic and anaerobic sporing rods were also elaborated. In all monitoring account was taken of sublethally injured target organisms, surviving purification technologies, though not deprived of their ecological significance. A need remains for a rigorously standardized operating procedure (SOP) for colony counts of psychrotrophic, oligotrophic Gram-negative rod-shaped bacteria ('heterotrophic plate count'), which constitute a useful criterion of indicator value. As in the contemporary HACCP approach to food safety, guidelines for assessing success or failure in control of integrity (Water Safety Objectives) were empirically elaborated. These rely on surveys on water samples, originating from drinking water supplies, previously verified as complying with longitudinally integrated HACCP-based purification technologies. Structured Academic dissemination of these innovations, through professional microbiologists to operator and executive levels, is recommended. Web based Distance Learning MSc Programmes, like the one, since the academic year 2003-2004, offered by the University of Hertfordshire, Hatfield, UK, may contribute to such endeavours. Though the complete Course is centered around Food Safety, the Modules in-Residence Practicals and Science and Technology of Drinking Water can be studied as an entity while being employed.

Bacteria↗

PubMed2006

N-Chlorotaurine and ammonium chloride: an antiseptic preparation with strong bactericidal activity.

The bactericidal activity of the endogenous antiseptic N-chlorotaurine (NCT) is significantly enhanced in the presence of ammonium chloride which induces the formation of monochloramine (NH(2)Cl) whose strong bactericidal activity is well known. In this study the properties of NCT plus ammonium chloride have been investigated. The reaction of active chlorine compounds like chloramine-T (N-chlorotoluene-sulfonamide sodium), chloroisocyanuric acid derivatives, hypochlorites (NaOCl, CaOCl(2)) with ammonium chloride did not stop at the stage of monochloramine, and the pungent smelling by-products di- and trichloramine, NHCl(2) and NCl(3), were also formed. This was not the case with NCT where only monochloramine was generated. The equilibrium constant of the reaction of NCT with ammonium was found to be [Formula: see text] , which allows to estimate the equilibrium concentration of monochloramine in aqueous solutions of NCT and ammonium chloride. At concentrations each ranging between 0.01% and 1.0% it comes to [NH(2)Cl]=3.5-254 ppm. As an unexpected result the monochloramine containing formulation turned out to be most stable in plain water without buffer additives. Quantitative killing assays revealed complete inactivation of 10(6) to 10(7)CFU/mL of seven bacterial strains by 0.1% NCT plus 0.1% ammonium chloride within 5 min, while with plain 0.1% NCT an incubation time of 2-4h was needed to achieve the same effect. The highly significant increase of bactericidal activity (200-300-fold) could be assigned to the presence of monochloramine which could be isolated by vacuum distillation. Aqueous solutions of NCT and ammonium chloride provide a highly effective and well tolerable antiseptic preparation appropriate to a treatment cycle of at least 1 month if stored in the refrigerator.

Ammonium Chloride↗

PubMed2006

A thermodynamic study to evidence the alpha,omega-dichloroalkane/ block copolymer mixed aggregates formation: effect of the copolymer architecture.

The thermodynamics of alpha,omega-dichloroalkanes in aqueous solutions of (ethylene oxide)(11)(propylene oxide)(16)(ethylene oxide)(11) (L35) and (propylene oxide)(8)(ethylene oxide)(23)(propylene oxide)(8) (10R5) was determined at 298 and 305 K. Modeling the experimental data allowed to calculate the standard free energy (DeltaG(D)(o)/w) and the volume (DeltaV(D)/w) for the additive-copolymer mixed aggregates formation per additive molecule. DeltaG(D)(o)/w for Cl(2)CH(2) and Cl(2)(CH(2))(2) evidenced that the process is controlled by the forces exercising between the chlorine atoms and the OH groups of the copolymer micelles protruded into the aqueous phase. Cl(2)(CH(2))(3) experiences both the hydrophilic and hydrophobic domains into the aggregates. The hydrophobic interactions are more significant in 10R5 whereas the hydrophilic ones are more significant in L35. Temperature increase does not influence DeltaG(D)(o)/w in 10R5, whereas, it does influence DeltaG(D)(o)/w in L35, enhancing the ability of the aggregate to extract the chlorinated compounds from the aqueous phase. The DeltaV(D)/w values are consistent with the free energy results. These insights agree with those predicted by the Flory liquid lattice theory. The calculations extended to several alpha,omega-dichloroalkanes showed that Cl(2)CH(2) and Cl(2)(CH(2))(2) prefer poly(ethylene oxide) (PEO), Cl(2)(CH(2))(3) exhibits the same affinity for both PEO and poly(propylene oxide) (PPO), whereas the more hydrophobic additives show a preference for PPO. The copolymer architecture plays a relevant role in the alpha,omega-dichloroalkane solubilization into the polymeric aggregates.

Journal Article↗

PubMed2004

First lessons of the Toulouse ammonium nitrate disaster, 21st September 2001, AZF plant, France.

A terrible explosion of ammonium nitrate, killing 30 people, occurred on 21st September 2001, in Toulouse, in AZF plant belonging to Grande Paroisse Company, TotalFinaElf Group. The manufactured chemicals in the plant were mainly ammonium nitrate, ammonium nitrate-based fertilisers and other chemicals including chlorinated compounds. The origins of the accident haven't found yet an agreement among investigators (company, justice). The aim of this paper is to provide abroad an overview of some lessons learnt on that accident, from many perspectives, following the national debates and parliamentary enquiry as well as the various technical accident investigations.

Accidents, Occupational↗

PubMed2006

Electrocoagulation of synthetically prepared waters containing high concentration of NOM using iron cast electrodes.

The aim of this investigation is to evaluate the treatability of synthetically prepared water with high concentration of humic substances by electrocoagulation in batch mode using iron cast electrodes. Effects of applied potential, initial humic substance concentration and supporting electrolyte type on humic substance removal efficiency were investigated. NaNO3, Na2SO4 and NaCl were used as supporting electrolyte. Among these supporting electrolytes, Na2SO4 and NaCl have provided high removal efficiencies, whereas in the experiments using NaNO3 as supporting electrolyte have been observed no flock formation. The highest removal rate is obtainable with NaCl as supporting electrolyte. Removal efficiencies for initial humic substance concentration of 500 mg L-1 with NaCl and Na2SO4 equal to 97.95% for 35 min and 92.69% for 70 min, respectively. This behavior of the system has been derived from oxidation products, available in the bulk solution, of chloride ions. When NaCl is used as supporting electrolyte, there is an advantage of providing the disinfection of water, but humic substances and chloride ions are available in the bulk solution with risk of formation undesirable organo-chlorine compounds, so the Na2SO4 is the most favorable supporting electrolyte.

Biological Products↗

PubMed2004

A survey to determine levels of chlorinated pesticides and PCBs in mussels and seawater from the Mid-Black Sea Coast of Turkey.

A mussel and seawater monitoring survey was conducted at six sampling points between Yalikoy (Ordu) and Sinop in 1999-2000 along the Mid-Black Sea Coast of Turkey in order to assess concentrations of organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs). Chlorinated pesticides and PCBs were measured in the mussel Mytilus Galloprovincialis and in seawater. In the mussel samples, the most common pollutants in terms of average concentration per g of wet weight (ww), were DDT (max. 1800 pg/gww, min. 240 pg/gww) and its metabolites DDD (max. 5400 pg/gww, min. 240 pg/gww) and DDE (max. 2800 pg/gww, min. 70 pg/gww). Also, dieldrin, heptachlor and HCB were notable contaminants in the mussel samples. PCBs were determined in none of the biota or seawater samples. The concentrations of the OCs and PCBs in mussels were higher in coastal areas receiving river discharges and close to the largest city of the region, Samsun (especially in sampling points in the harbour area). The well-known long persistence of DDTs and other chlorinated compounds was confirmed by residues of these pollutants measured in mussels. On the other hand, even though the usage of such kind of persistent compounds in Turkey was banned, there may still be illegal usage and it is not certain whether the application of these compounds did end in the region.

Animals↗

PubMed2006

The accumulation levels of PAHs, PCBs and DDTs are related in an inverse way to the size of a benthic amphipod (Echinogammarus stammeri Karaman) in the River Po.

The accumulation of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and DDTs were investigated in gammarids captured at three sites along the middle River Po; the first was located upstream and the other two were at increasing distances downstream of the confluence of a polluted tributary, the River Lambro. Using a GC-MS technique, the levels of PCBs, PAHs and DDTs were determined separately in large and small gammarids as well as in the fine fraction of sediment samples collected along the sites of capture. Results confirm the River Lambro as a source of these chemicals to the River Po, and show that bioaccumulation differences exist between small and large individuals, the former being more contaminated particularly by PCBs and DDTs. This is likely the result of several interacting factors such as contaminant bioavailability, gammarid-size effects on kinetic parameters and feeding selectivity. The bioaccumulation patterns of PCBs and DDTs, and their higher biota-sediment accumulation factors (BSAF), are consistent with chemical properties and suggest a dietary disequilibrium found only 10 km downstream from the tributary, and in smaller amphipods. Present results show that gammarids may represent an additional source of contaminants, particularly of chlorinated compounds, to the many organisms feeding on them, with a higher risk for those which prey selectively on smaller gammarids.

Amphipoda↗

PubMed2003

Enhanced PCE dechlorination by biobarrier systems under different redox conditions.

The industrial solvent tetrachloroethylene (PCE) is among the most ubiquitous chlorinated compounds found in groundwater contamination. The objective of this study was to evaluate the (1) feasibility of enhancing PCE biodegradation using cane molasses and sludge cakes as the primary substrates under methanogenic and iron reducing conditions, and (2) potential of installation a sludge cake/cane molasses biobarrier to clean up PCE-contaminated aquifers. The biodegradability of sludge cake (from secondary wastewater treatment system) and cane molasses was tested using bioavailability experiments. Results show that biodegradable materials were released from sludge cake/cane molasses and utilized by microbial consortia. Based on the chemical oxygen demand (COD) tests, approximately 28 and 248 mg of biodegradable COD can be released from 1g of sludge cake and 1g of cane molasses under anaerobic conditions, which have the potential to convert 70 and 620 mg of PCE to ethylene (ETH), respectively. Reductive dechlorination was evaluated using microcosms containing primary substrates (sludge cake/cane molasses) and inocula (aquifer sediments). Results indicate that sludge cake and cane molasses can serve as the diffusion sources of primary substrates, and enhance the reductive dechlorination of PCE under methanogenic processes. However, results from this study were not sufficient enough to show that reductive dechlorination of PCE would occur under iron-reducing conditions. This indicates that more studies need to be performed to further evaluate the role of iron reduction on the PCE dechlorination. Results reveal that it is feasible and applicable to install a sludge cake or cane molasses biobarrier to clean up PCE contaminated aquifers. From an engineering point of view, the sludge cake/cane molasses biobarrier has the potential to become an environmentally and economically acceptable technology for PCE bioremediation.

Biodegradation, Environmental↗