PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Polyesters”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
PubMed2001

Involvement of catalytic amino acid residues in enzyme-catalyzed polymerization for the synthesis of polyesters.

Recently, a variety of aliphatic polyesters have been synthesized using hydrolases such as lipases and PHB depolymerases, and the reaction mechanism for these enzyme-catalyzed polymerization has been discussed. In this paper, we have studied the involvement of the catalytic amino acid residues of the hydrolase in enzyme-catalyzed polymerization with an extracellular PHB depolymerase from Alcaligenes faecalis T1. A wild-type PHB depolymerase and three kinds of site-specific mutants (catalytic amino acids were substituted) were prepared and their polymerization activities for the ring-opening polymerization of (R)-beta-butyrolactone (BL) were compared. BL was polymerized at 80 degrees C in bulk by the wild-type enzyme to yield polymers consisting of cyclic and linear structures in a high monomer conversion. In contrast, none of the mutant enzymes showed obvious polymerization activity. These results have clearly demonstrated that the catalytic triad is indeed responsible for the enzyme-catalyzed polymerization of BL.

4-Butyrolactone↗
PubMedDate not supplied

Crystalline/amorphous phase structure and molecular mobility of biodegradable poly(butylene adipate-co-butylene terephthalate) and related polyesters.

Differential scanning calorimetry (DSC), atomic force microscopy (AFM), wide-angle X-ray scattering (WAXD), and solid-state (13)C NMR have been used to investigate the crystalline/amorphous structure and molecular mobility of biodegradable poly(butylene adipate-co-44 mol % butylene terephthalate) [P(BA-co-44 mol % BT)] copolyester sample crystallized from the melt. The DSC endothermic peak, which is ascribed to the melting of the crystalline region, was broad relative to those reported for conventional partially crystalline polyesters. In AFM observation, spherulitic morphology was not observed while small particles with a size of about 100 nm were detected. The WAXD pattern of the sample was very broad. These results have indicated that a melt-crystallized P(BA-co-44 mol % BT) sample contains small crystals with a wide distribution in size. A solid-state (13)C NMR technique was also used to perform molecular-level and selective analyses for both butylene terephthalate and butylene adipate units. For the butylene terephthalate units, the existence of two components with different microstructure and molecular mobility was detected: one component was assigned to the alpha-form crystal of poly(butylene terephthalate) homopolymer (PBT) and the other was in amorphous regions. In contrast, all of butylene adipate units were located in amorphous regions. Solid-state NMR data have suggested that sizes of crystalline regions are less than 3 nm.

Biodegradation, Environmental↗
PubMedDate not supplied

Chemical modification of chlorinated microbial polyesters.

Chlorination of microbial polyesters poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) was carried out by passing chlorine gas through their solutions. The chlorine contents in chlorinated PHB (PHB-Cl) and chlorinated PHO (PHO-Cl) were between 5.45 and 23.81 wt % and 28.09 and 39.09 wt %, respectively. Molecular weights of the chlorinated samples were in the range of between one-half to one-fourth of the original values because of hydrolysis during the chlorination process. Thermal properties of the PHO-Cl were dramatically changed with an increase in its glass transition (T(g) = 2 degrees C) and the melting transition (T(m)). The T(g) of PHB-Cl varied from -20 to 10 degrees C, and its T(m) decreased to 148 degrees C. The chlorinated poly(3-hydroxyalkanoate)s (PHA-Cl) were converted to their corresponding quaternary ammonium salts (PHA-N(+)R(3)), sodium sulfate salts (PHA-S), and phenyl derivatives (PHA-Ph). Cross-linked polymers were also formed by a Friedel-Crafts reaction between benzene and PHA-Cl. The modified PHO derivatives were characterized by (1)H NMR and (13)C NMR spectrometry, Fourier transform infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry techniques.

Chlorine↗
PubMedDate not supplied

Photoinitiated cross-linking of the biodegradable polyester poly(propylene fumarate). Part I. Determination of network structure.

In this work, we investigated the mechanism involved in the photoinitiated cross-linking of the polyester poly(propylene fumarate) (PPF) using the initiator bis(2,4,6-trimethylbenzoyl) phenylphosphine oxide (BAPO). It was hypothesized that BAPO has the ability to cross-link PPF into solid polymer networks, without the use of a cross-linking monomer, because two pairs of radicals, both involving a fast adding phosphinoyl radical, were formed upon UV irradiation of BAPO. Spectroscopic investigation first confirmed the addition of BAPO derived radicals to the PPF olefin. Investigations of fumarate conversion and bulk network properties were then undertaken, using the BAPO initiator and a monoacylphosphine oxide (MAPO) initiator which contains a single photolabile bond. Results show that a single BAPO phosphinoyl radical was primarily responsible for the formation of a highly cross-linked PPF network and the additional radical pair which may be formed does not dramatically alter fumarate conversion or bulk network properties. From these results, the network structure of BAPO initiated, photo-cross-linked PPF may be deduced. Finally, this study demonstrates a method for inferring cross-linked network structures by contrasting properties of bulk materials formed from similar cross-linking initiators.

Biocompatible Materials↗
PubMedDate not supplied

Preparation of a novel artificial bacterial polyester modified with pendant hydroxyl groups.

The Poly(hydroxyalkanoate) (PHA) chemical modifications represent an alternative route to introduce functional groups, which cannot be introduced by bioconversion. PHAs containing unsaturated chains were readily converted into polyesters containing a terminal hydroxyl group on the side chains. With the use of the borane-tetrahydrofuran complex, the pendant side chain alkenes were quantitatively transformed into hydroxyl functions. The conversion proceeded to completion without a significant decrease in molecular weight. The introduction of hydroxyl groups in the products was confirmed from Fourier transform infrared and 1H NMR analysis. The presence of repeating units containing pendant hydroxyl groups in the proportion 25 mol % caused an increase in hydrophilicity of these new PHAs because they were soluble in polar solvents such as ethanol. Besides, these reactive PHAs can be used to bind bio-active molecules or to prepare novel graft copolymers with desired properties.

Bacteria↗
PubMedDate not supplied

Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy.

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.

Adsorption↗
PubMedDate not supplied

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM.

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.

Adsorption↗
PubMedDate not supplied

Polynitrosated polyesters: preparation, characterization, and potential use for topical nitric oxide release.

New nitric oxide (NO) donor macromolecules, containing multiple S-nitrosothiol (S-NO) groups covalently attached to the polymer backbone, were prepared through the polycondensation reaction of diols (ethylene glycol and poly(ethylene glycol)) with mercaptosuccinic acid, followed by the S-nitrosation of the SH groups by a gaseous NO/O2 mixture. The polynitrosated polyesters (PNPEs) obtained were characterized by IR spectroscopy and gel permeation chromatography and displayed biological activity as vasodilators, leading to local hyperaemia when applied topically on healthy skin. Kinetic measurements in either dry or aqueous conditions have shown that PNPEs can provide sustained NO release for more than 20 h at physiological temperature. Their increased viscosity at low temperatures greatly reduces the rate of NO release, allowing for their storage for more than 90 days at -20 degrees C without decomposition. These results indicate that PNPEs have potential for topical delivery of NO in biomedical applications.

Administration, Topical↗
PubMed2006

Porous scaffolds from high molecular weight polyesters synthesized via enzyme-catalyzed ring-opening polymerization.

Several aliphatic polyesters have been synthesized until now using enzyme-catalyzed ring-opening polymerization (ROP) of different lactones, although their molecular weight, hence mechanical strength, was not sufficient enough to fabricate porous scaffolds from them. To achieve this target, 1,5-dioxepan-2-one (DXO) and epsilon-caprolactone (CL) were polymerized in bulk with Lipase CA as catalyst at 60 degrees C, and porous scaffolds were prepared from the polymers obtained thereof using a salt leaching technique. The CL/DXO molar feed ratio was varied from 1.5 to 10, and the reactivity ratios of CL and DXO were determined using the Kelen-Tudos method under such conditions of polymerization. NMR results showed a slightly lower CL/DXO molar ratio in the copolymers than in the feed due to high reactivity of DXO toward Lipase CA catalysis. The crystallinity of the PCL segment of the copolymers was affected by the presence of soft and amorphous DXO domains. The copolymers having high CL content were thermally more stable. The porosity of the scaffolds was in the range 82-88%, and the SEM analysis showed interconnected pores in the scaffolds. Of the two parameters which could affect the mechanical properties, viz., the copolymer composition and the scaffold pore size, the pore size showed a significant effect on the mechanical properties of the scaffolds. The porous scaffolds developed in this way for tissue engineering are free from toxic organometallic catalyst residues, and they are highly suitable for biomedical applications.

Biocompatible Materials↗
PubMed2000

Lipase-catalyzed degradation of polyesters in organic solvents. A new methodology of polymer recycling using enzyme as catalyst.

Enzymatic hydrolytic degradation of aliphatic polyesters in organic solvents has been examined. The degradation of poly(epsilon-caprolactone) took place using Candida antarctica lipase as catalyst in toluene at 60 degrees C to give oligomers with molecular weight of less than 500. The degradation behavior catalyzed by lipase was quite different than an acid-catalyzed degradation (random bond cleavage of polymer). After the removal of the solvent from the reaction mixture, the residual oligomer was polymerized in the presence of the same catalyst of lipase. These data provide a basic concept that the degradation-polymerization could be controlled by presence or absence of the solvent, providing a new methodology of plastics recycling.

Candida↗
PubMedDate not supplied

Three-dimensional mammalian cell growth on nonwoven polyester fabric disks.

Small disks of nonwoven polyester fabric (NWPF), similar to Fibra-Cel carriers, were surface treated with strong acid and used as a high surface area support matrix for in vitro culture of anchorage dependent MRC-5 cells. The disks can be autoclaved, and require inocula concentrations of only 2-5% of the final cell densities, which have reached 10(8) cells/mL of disk bed volume. Scanning electron microscopy photographs shown herein reveal that cells grow in a multilayered fashion between the randomly arrayed fibers of the nonwoven fabric, emulating in vivo growth.

Cell Adhesion↗
PubMed2002

Site-isolated luminescent europium complexes with polyester macroligands: metal-centered heteroarm stars and nanoscale assemblies with labile block junctions.

The synthesis of a series of polymeric Eu(III) complexes with polyester ligands, along with supporting emission spectra, luminescence lifetimes, and, for a Eu block copolymer film, atomic force microscopy (AFM) data, is presented. Dibenzoylmethane was derivatized with a hydroxyl initiator site (dbmOH, 1) for tin octoate catalyzed ring opening polymerization of dl-lactide. The resulting poly(lactic acid) macroligand, dbmPLA (2), was combined with EuCl3 to generate Eu(dbmPLA)3 (3). Chelation of both dbmPLA and a polycaprolactone-functionalized bipyridine ligand (bpyPCL2) led to the Eu(III)-centered heteroarm star Eu(dbmPLA)3(bpyPCL2) (4). Unpolarized emission spectra and luminescence lifetimes were recorded for the Eu polymers in CH2Cl2 and for Eu(dbmPLA)3, as a film. Solution data for Eu(dbm)3 and Eu(dbm)3(bpy) were collected for comparison. For Eu tris(dbm) complexes, data were fit to a double exponential decay, indicating the presence of multiple species. Relative amounts of the longer lifetime component increase in the series Eu(dbm)3 solutions to Eu(dbmPLA)3 solutions to Eu(dbmPLA)3 films, perhaps suggesting benefits of the "polymer shell effect" and the diminishment of aquo adducts known to shorten lifetimes. As with the nonpolymeric analogue, data for Eu(dbmPLA)3(bpyPCL2) fit to a single-exponential decay. The sharpness of the feature at 579.7 nm, attributable to the 5D0 --> 7F0 transition in the emission spectrum of 4, lends further support for a homogeneous sample. AFM studies of "as cast" thin films of 4 reveal a lamellar structure with a 17.5 nm repeat. These microstructures, inferred to contain Eu luminophores at the glassy PLA-crystalline PCL domain interfaces, are modified by thermal treatment.

2,2'-Dipyridyl↗
PubMed2005

Synthesis and properties of carborane-functionalized aliphatic polyester dendrimers.

The incorporation of multiple p-carborane cages within an aliphatic polyester dendrimer was accomplished through the preparation of a bifunctional carborane synthon. A p-carborane derivative having an acid and a protected alcohol functionality was found to efficiently couple to peripheral hydroxyl groups of low-generation dendrimers under standard esterification conditions. Deprotection of carborane hydroxyl groups allowed for further dendronization through a divergent approach using the highly reactive anhydride of benzylidene-protected 2,2-bis(hydroxymethyl)propanoic acid. This approach was used to prepare fourth- and fifth-generation dendrimers that contain 4, 8, and 16 carborane cages within their interior. Upon peripheral deprotection to liberate a polyhydroxylated dendrimer exterior, these structures exhibited aqueous solubility as long as a minimum of eight hydroxyl groups per carborane were present. Several of the water-soluble structures were found to exhibit a lower critical solution temperature. Additionally, irradiation of these materials with thermal neutrons resulted in emission of gamma radiation that is indicative of boron neutron capture events occurring within the carborane-containing dendrimers.

Acids↗
PubMed2001

Formulation of physical properties of methyl glucoside polyester by mixture response surface methodology.

Methyl glucoside polyester (MGPE), consisting of a methyl glucoside molecule esterified with four fatty acids, is a potential fat substitute. A mixture response surface methodology was employed to model the physical properties (melting point, density, and viscosity) of MGPE prepared from composite blends of fatty acid methyl esters (FAME). The measured physical properties were similar to those of soybean oil, except for a higher viscosity. The physical properties correlated significantly with the degree of saturation of their composite fatty acids. Results showed that the physical properties of MGPE prepared from a FAME mixture derived from high oleic acid safflower oil and soybean oil (molar ratio 1:1) was similar to those of soybean oil. The physical properties of MGPE can be adjusted by modifying the saturated fatty acids of synthesized MGPE to simulate the physical properties of soybean oil.

Chemical Phenomena↗
PubMed2000

Application of response surface methodology to the study of methyl glucoside polyester synthesis parameters in a solvent-free system.

Response surface methodology (RSM) and 3-level-3-factor fractional factorial design were used to evaluate the effects of synthesis parameters, including reaction time (4 to 8 h), temperature (110 to 130 degrees C), and substrate molar ratio of fatty acid methyl esters (FAME) from soybean oil to methyl glucoside (4:1 to 6:1) on the percent molar conversion to methyl glucoside polyester (MGPE), utilizing 15 g of methyl glucoside as the reactant in a solvent-free system. All synthesis variables (reaction time, temperature, and substrate molar ratio) exhibited significant effects on percent molar conversion to MPGE in the experimental range. Optimization of the synthesis reaction was suggested by ridge max analysis to compute the estimated ridge of optimum response for increasing radii from the center of the original design. Based on the ridge max analysis, optimum conditions were: reaction time 6.3 h, synthesis temperature 123.8 degrees C, and substrate molar ratio 5.9:1. The predicted molar conversion was 55.68% (i.e., 15 g methyl glucoside yielded 56.5 g MGPE) at the optimum point.

Glucosides↗
PubMed2006

Organic-inorganic hybrid nanoparticles: surface characteristics and interactions with a polyester resin.

Organic-inorganic hybrid nanoparticles, derived from silica precursors with different organic functionalities (methyl, ethyl, vinyl, and phenyl) synthesized via a modified Stöber method have been investigated. These particles are intended as modifiers for polymers and polymer matrix composites. Therefore, the characteristics of a polyester matrix have also been determined, and the likely interactions with the particles have been proposed. Particles have been characterized using inverse gas chromatography (IGC), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FT-IR). The particles show two different sets of characteristics, with methyl, ethyl, and vinyl modified silicas showing one type of behavior and the phenyl modified silica behaving rather differently. The methyl, ethyl, and vinyl groups exhibit the appearance of uniform coverage, as they are comparatively small and tightly packed, which will prevent interaction of matrix resin with retained silanol groups. The phenyl group, which is comparatively large, is not able to pack as closely, which results in a reduction of the presence and availability of silanol groups, compared to an unmodified fumed silica, but not complete inaccessibility as far as the matrix resin is concerned.

Acids↗
PubMedDate not supplied

Biological evaluation of polyester dendrimer: poly(ethylene oxide) "bow-tie" hybrids with tunable molecular weight and architecture.

High molecular weight (MW) polymers have shown promise in terms of improving the properties and the efficacy of low MW therapeutics. However, new systems that are highly biocompatible, are biodegradable, have well-defined MW, and have multiple functional groups for drug attachment are still needed. The biological evaluation of a library of eight polyester dendrimer-poly(ethylene oxide) (PEO) bow-tie hybrids is described here. The group of evaluated polymers was designed to include a range of MWs (from 20000 to 160000) and architectures with the number of PEO arms ranging from two to eight. In vitro experiments revealed that the polymers were nontoxic to cells and were degraded to lower MW species at pH 7.4 and pH 5.0. Biodistribution studies with (125)I-radiolabeled polymers showed that the high MW carriers (>40000) exhibited long circulation half-lives. Comparison of the renal clearances for the four-arm versus eight-arm polymers indicated that the more branched polymers were excreted more slowly into the urine, a result attributed to their decreased flexibility. Due to their essentially linear architecture that does not provide for good isolation of the iodinated phenolic moieties, the polymers with "two arms" were rapidly taken up by the liver. The biodistributions of two long-circulating high MW polymers in mice bearing subcutaneous B16F10 tumors were evaluated, and high levels of tumor accumulation were observed. These new carriers are therefore promising for applications in drug delivery and are also useful for improving our understanding of the effect of polymer architecture on pharmacokinetic properties.

Animals↗