PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Particulate Matter”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

Spatial variability of different fractions of particulate matter within an urban environment and between urban and rural sites.

The spatial variability of different fractions of particulate matter (PM) was investigated in the city of Basel, Switzerland, based on measurements performed throughout 1997 with a mobile monitoring station at six sites and permanently recorded measurements from a fixed site. Additionally, PM10 measurements from the following year, which were concurrently recorded at two urban and two rural sites, were compared. Generally, the spatial variability of PM4, PM10, and total suspended particulates (TSP) within this Swiss urban environment (area = 36 km2) was rather limited. With the exception of one site in a street canyon next to a traffic light, traffic density had only a weak tendency to increase the levels of PM. Mean PM10 concentration at six sites with different traffic densities was in the range of less than +/- 10% of the mean urban PM10 level. However, comparing the mean PM levels on workdays to that on weekends indicated that the impact of human activities, including traffic, on ambient PM levels may be considerable. Differences in the daily PM10 concentrations between urban and more elevated rural sites were strongly influenced by the stability of the atmosphere. In summer, when no persistent surface inversions exist, differences between urban and rural sites were rather small. It can therefore be concluded that spatial variability of annual mean PM concentration between urban and rural sites in the Basel area may more likely be caused by varying altitude than by distance to the city center.

Air Pollution↗

Urban dust particulate matter alters PAH-induced carcinogenesis by inhibition of CYP1A1 and CYP1B1.

The polycyclic aromatic hydrocarbons (PAHs) benzo[a]pyrene (B[a]P) and dibenzo[a,l]pyrene (DB[a,l]P) are well-studied environmental carcinogens, however, their potency within a complex mixture is uncertain. We investigated the influence of urban dust particulate matter (UDPM) on the bioactivation and tumor initiation of B[a]P and DB[a,l]P in an initiation-promotion tumorigenesis model. SENCAR mice were treated topically with UDPM or in combination with B[a]P or DB[a,l]P, followed by weekly application of the promoter 12-O-tetradecanoylphorbol-13 acetate. UDPM exhibited weak tumor-initiating activity but significantly delayed the onset of B[a]P-induced tumor initiation by two-fold. When cotreated with UDPM, DB[a,l]P-treated animals displayed no significant difference in tumor-initiating activity, compared with DB[a,l]P alone. Tumor initiation correlated with PAH-DNA adducts, as detected by (33)P-postlabeling and reversed-phase high-performance liquid chromatography. Induction of cytochrome P450 (CYP)1A1 and 1B1 proteins was also detected following UDPM treatment or cotreatment with B[a]P or DB[a,l]P, indicating PAH bioactivation. Further genotoxicity analyses by the comet assay revealed that cotreatment of UDPM plus B[a]P or DB[a,l]P resulted in increased DNA strand breaks, compared with PAH treatment alone. The metabolizing activities of CYP1A1 and CYP1B1, as measured by the 7-ethoxyresorufin O-deethylation (EROD) assay, revealed that UDPM noncompetitively inhibited CYP1A1 and CYP1B1 EROD activity in a dose-dependent manner. Overall, these data suggest that components within complex mixtures can alter PAH-induced carcinogenesis by inhibiting CYP bioactivation and influence other genotoxic effects, such as oxidative DNA damage. These data further suggest that in addition to the levels of potent PAH, the effects of other mixture components must be considered when predicting human cancer risk.

Animals↗

Long-term exposure to particulate matter and all-cause and cause-specific mortality in an analysis of multiple Asian cohorts.

BACKGROUND: Exposure to ambient air pollution is associated with a significant number of deaths. Much of the evidence associating air pollution with adverse effects is from North American and Europe, partially due to incomplete data in other regions limiting location specific examinations. The aim of the current paper is to leverage satellite derived air quality data to examine the relationship between ambient particulate matter and all-cause and cause-specific mortality in Asia. METHODS: Six cohorts from the Asia Cohort Consortium provided residential information for participants, recruited between 1991 and 2008, across six countries (Bangladesh, India, Iran, Japan, South Korea, and Taiwan). Ambient particulate material (PM2·5) levels for the year of enrolment (or 1998 if enrolled earlier) were assigned utilizing satellite and sensor-based maps. Cox proportional models were used to examine the association between ambient air pollution and all-cause and cause-specific mortality (all cancer, lung cancer, cardiovascular and lung disease). Models were additionally adjusted for urbanicity (representing urban and built characteristics) and stratified by smoking status in secondary analyses. Country-specific findings were pooled via random-effects meta-analysis. FINDINGS: More than 300,000 participants across six cohorts were included, representing more than 4-million-person years. A positive relationship was observed between a 5 µg/m (Dockery et al., 1993) increase in PM2·5 and cardiovascular mortality (HR: 1·06, 95 % CI: 0.99, 1·13). The additional adjustment for urbanicity resulted in increased associations between PM2.5 and mortality outcomes, including all-cause mortality (1·04, 95 % CI: 0·97, 1·11). Results were generally similar regardless of whether one was a current, never, or ex-smoker. INTERPRETATION: Using satellite and remote sensing technology we showed that associations between PM2.5 and all-cause and cause-specific Hazard Ratios estimated are similar to those reported for U.S. and European cohorts. FUNDING: This project was supported by the Health Effects Institute. Grant number #4963-RFA/18-5. Specific funding support for individual cohorts is described in the Acknowledgements.

Humans↗

Study on suspended particulate matter and polycyclic aromatic hydrocarbons in indoor and outdoor air.

To study changes in the concentration of suspended particulate matter (SPM) in indoor and outdoor air, a new portable sampler (AND sampler) was designed that could separately collect particles exhibiting aerodynamic diameters of greater than 10 microns, 2-10 microns, and less than 2 microns. The relationship between the airborne particle concentration in indoor air and that in outdoor air varied with the aerodynamic diameter of the particles. The concentration of SPM in the indoor air increased in proportion to that in the outdoor air. The concentration of polycyclic aromatic hydrocarbons (PAH) in SPM also varied with the aerodynamic diameter of the particles. Fine particles exhibiting an aerodynamic diameter of less than 2 microns contained high concentration of PAH. The concentrations of benzo(k)fluoranthene, benzo(a)pyrene, and benzo(ghi)perylene in indoor air increased in proportion to those in outdoor air.

Air Pollutants↗

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China).

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.

China↗

Bootstrap model averaging in time series studies of particulate matter air pollution and mortality.

The consensus from time series studies that have investigated the mortality effects of particulate matter air pollution (PM) is that increases in PM are associated with increases in daily mortality. However, recently concerns have been raised that the observed positive association between PM and mortality may be an artefact of model selection due to multiple hypothesis testing. This problem arises when a number of models are investigated, but only the "best" model is reported and all subsequent inference is based on this model, ignoring the model selection process. In this paper, we introduce the use of the bootstrap as a means of addressing the problems of model selection in PM mortality time series studies. Using the bootstrap to perform inference about the effect of PM on mortality is a process based on a set of models rather than on a single model. It is shown that using the bootstrap to overcome the problems of model selection is competitive with the existing methodology of Bayesian model averaging.

Air Pollutants↗

Characterization of elemental pollution and its variations in sediments and suspended particulate matter from the River Elbe via multi-element analysis combined with chemometric data evaluation.

Sediments and suspended particulate matter taken from about 100 sampling sites along the River Elbe from the source to the mouth during the period 1992 and 1998 have been analyzed for the concentrations of more than 60 elements in each sample. The analytical data were subsequently processed by means of multivariate statistics in order to characterize the charge of the River Elbe with inorganic pollutants to elucidate pollution trends. Using factor analysis 18 elements were found to be enriched by human activities. By means of cluster analysis--using the 18 anthropogenically influenced elements as variables--the sampling sites were aggregated into groups having similar element distributions. Thus, the entire stretch of the River Elbe was divided into three sections of characteristic elemental pollution. Finally, the trends in anthropogenic pollution within the characteristic regions since the early nineties were assessed. It turned out that most of the anthropogenically influenced elements showed a decrease in the upper and middle parts of the river, whereas no decrease could be verified in the estuary region.

Environmental Monitoring↗

Evaluation of the SKC DPM cassette for monitoring diesel particulate matter in coal mines.

In a previous study, the efficacy of commercial and prototype impactors for sampling diesel particulate matter (DPM) in coal mines was investigated. Laboratory and field samples were collected on quartz-fiber filters and analyzed for organic and elemental carbon. Coal dust contributed a minimal amount of elemental carbon when commercial cascade impactors and prototype impactors, designed by the University of Minnesota (UMN) and the US Bureau of Mines (BOM), were used to collect submicrometer dust fractions. Other impactors were not as effective at excluding coal dust. The impactors evaluated in that study were either not commercially available or were multi-stage, expensive, and difficult to use for personal measurements. A commercial version of the BOM impactor, called the DPM Cassette, was recently introduced by SKC. Tests were conducted to evaluate the performance of the DPM Cassette for measuring diesel-source elemental carbon in the presence of coal dust. Bituminous coals from three mines in two different coal provinces were examined. The dust particle diameters were small and the coal dust contained a high percentage of carbon, thereby giving a worst-case condition for non-anthracite coal mines. Results for the DPM Cassette were essentially identical to those obtained by the BOM impactors in a previous study. At a respirable coal dust concentration of 5.46 mg m(-3), which is 3.8 times the regulatory limit, the DPM Cassette collected only 34 microg m(-3) of coal-source elemental carbon.

Air Pollutants, Occupational↗

The determination of benzo[a]pyrene in the total particulate matter of cigarette smoke.

A procedure for the isolation and determination of benzo[a]pyrene in the total particulate matter of cigarette smoke is described. Two high-pressure liquid chromatographic (HPLC) techniques are employed: a normal-phase, mu Bondapak-NH2, amino column is used for isolation of the benzo[a]pyrene fraction and a reversed-phase, Vydac 201TP54, polymeric octadecyl silane column is used for quantitation. Fluorescence detection is used in both modes of chromatography. The wavelengths of excitation and emission are evaluated for analytical detection. Extraction media and various isolation techniques are compared for their extraction efficiency and isolation from interferences, respectively. The procedure is efficient, reproducible, sensitive (3 pg), and gives results that compare favorably with other techniques reported in the literature for the B[a]P content of reference cigarettes, 1R1 and 1R4F.

Benzo(a)pyrene↗

Association of fine particulate matter from different sources with daily mortality in six U.S. cities.

Previously we reported that fine particle mass (particulate matter [less than and equal to] 2.5 microm; PM(2.5)), which is primarily from combustion sources, but not coarse particle mass, which is primarily from crustal sources, was associated with daily mortality in six eastern U.S. cities (1). In this study, we used the elemental composition of size-fractionated particles to identify several distinct source-related fractions of fine particles and examined the association of these fractions with daily mortality in each of the six cities. Using specific rotation factor analysis for each city, we identified a silicon factor classified as soil and crustal material, a lead factor classified as motor vehicle exhaust, a selenium factor representing coal combustion, and up to two additional factors. We extracted daily counts of deaths from National Center for Health Statistics records and estimated city-specific associations of mortality with each source factor by Poisson regression, adjusting for time trends, weather, and the other source factors. Combined effect estimates were calculated as the inverse variance weighted mean of the city-specific estimates. In the combined analysis, a 10 microg/m(3) increase in PM(2.5) from mobile sources accounted for a 3.4% increase in daily mortality [95% confidence interval (CI), 1.7-5.2%], and the equivalent increase in fine particles from coal combustion sources accounted for a 1.1% increase [CI, 0.3-2.0%). PM(2.5) crustal particles were not associated with daily mortality. These results indicate that combustion particles in the fine fraction from mobile and coal combustion sources, but not fine crustal particles, are associated with increased mortality.

Adolescent↗

Particulate matter and gaseous contaminants in indoor environments in an isolated northern community.

OBJECTIVES: Globally, 86% of exposure to particulate matter (PM) occurs indoors. Wood furnaces and smoke curing are known sources of PM in isolated communities in northern Canada. STUDY DESIGN: Three homes with wood furnaces, three with oil furnaces, and nine tipis (smoke curing huts) in Deline, Northwest Territories were sampled for carbon monoxide, carbon dioxide, total hydrocarbons, formaldehyde, and for PM of less than 10 microns in diameter (PM10). RESULTS: All gaseous contaminants were below relevant air quality standards. In contrast, all but one environment had PM10 concentrations above standards. The presence of smokers correlated with higher PM10 levels within fuel categories. PM10 did not differ significantly between heating types (means, 0.12-0.53 mg/m3). Exposures to PM10 in tipis averaged 2.3 mg/m3. CONCLUSION: Residents were exposed to substantial concentrations of PM10 from cigarette smoking, wood stoves, and smoke curing. Concentrations were within the range where respiratory symptoms have been observed. Measures to reduce exposure should consider prevention of adverse health effects and preservation of traditional activities.

Air Pollution, Indoor↗

Chemical characterization of the PM10 fraction of airborne particulate matter in the urban atmosphere.

This study examines the chemical composition of PM10, the thoracic fraction of atmospheric particulate matter. This fraction is characterized by a very complex composition and is able to penetrate the human organism corresponding to a "cut point" at the level of the larynx. We used a sampling device to separate the PM10 from other fractions with different aerodynamic behavior. The high volume sampler collected large amounts of material, making it easier to study the micropollutants. Furthermore, it met EPA performance specifications for the measurement of suspended PM10 fraction. We collected the samples during different metereological conditions in the urban area of the town of Leghorn in Tuscany, Italy. Two sites, characterized by different settings, were chosen in the city. Both sites were marked by intense motor vehicle traffic. A better chemical characterization of the collected material became possible using different analytical techniques. The use of large-size cellulose or glass fiber filters allowed us to subdivide the sample and to submit each portion to a different investigative technique. The PAH content of the PM10 fraction was examined, particularly for those compounds of toxicological interest. The concentrations of the compounds were evaluated by HPLC with diode array UV detection. We further determined the contents of various heavy metals from anthropic or telluric sources (Pb, Cu, Fe, Cr, Cd, Mn, V, and Ni) by means of an HGA Graphite Furnace AAS-Zeeman-Effect technique or AA-Flame spectrophotometry. The results of our experiment show that motor vehicle traffic is the prevailing pollution source. The metereological conditions also play a significant role. The samples taken closer to the industrial area of the town showed a slightly higher mean content of PM10 fraction. The concentrations of both heavy metals and PM10 were lower compared with equivalent data from other European cities.

Air Pollutants↗

Carbon speciation in airborne particulate matter with C (1s) NEXAFS spectroscopy.

Recent and current research activities on the chemical characterization of carbon in airborne carbonaceous particulate matter with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy are reviewed. NEXAFS spectroscopy uses soft X-rays from synchrotron radiation facilities and allows for the bulk and surface speciation of particulates smaller than 2.5 micrometres (PM 2.5). This relatively novel technique is often superior to TEM-EELS and FTIR spectroscopy. In the extreme case, one single PM particle is sufficient for characterization. Liquids, extracts, solid core and surface functional groups can be quantified. Preliminary data on combustion derived PM such as diesel soot, wood smoke and tobacco smoke are compared with ambient samples.

Air Pollutants↗

Distribution characteristics of acid-dissolved trace metals of suspended particulate matter (SPM) in Kurashiki, Japan.

This study was undertaken to examine the distribution characteristics of such trace metals in fine particulate (especially with diameters of less than 2.1 microns). The acid-dissolved metals in suspended particulate matter (0.1-9.0 microns) were examined with consideration given to particle size over a 2-year period. It became clear the metals of artificial origin such as Pb, V, Cd, Ni, Cr exist in fine particulates (0.1 or more 2.0 microns), whereas metals of natural origin, such as Ti, Mn, Mg, and Sr primarily exist in coarse particles (2.1-9.0 microns) in Kurashiki City, near the Mizushima Industrial Area in Japan.

Acids↗

Uptake and transfer of particulate matter from the peritoneal cavity of the rat.

1. Colloidal mercuric sulfide or thorium dioxide injected intraperitoneally passes into the cytoplasm of the mesothelium of the mesentery and of the diaphragm as early as 15 to 30 minutes after the injection. 2. Between 15 minutes and 12(1/2) hours the number of particles within the mesothelial cells increases as the time between injection and termination of the experiment is lengthened. 3. The particulate matter is usually localized in the cytoplasm within clear vacuoles or bodies having a relatively dense matrix. 4. A greater quantity of the absorbed material is commonly observed within the cytoplasm of the diaphragmatic than of the mesenteric mesothelium.

Abdominal Muscles↗

On-line analysis of urban particulate matter focusing on elevated wintertime aerosol concentrations.

A 10-day winter sampling campaign was conducted in downtown Toronto for particulate matter (PM) air pollution in the fine (<2.5 microm) size range. An aerosol laser ablation mass spectrometer (LAMS), a tapered-element oscillating microbalance (TEOM), and an aerodynamic particle sizer (APS) were operated in parallel to characterize the PM on-line. In this study, the LAMS observed differences in the chemical composition between three separate episodes with higher PM2.5 mass and APS counts. LAMS results showed that in one instance of elevated PM, organic amines were present in the particulates. Temporal analyses of this episode revealed chemical transformations as the amines, characterized by m/z peaks 58(C3HeN)+, 86(C5H2N)+, and nitrates, increased in number concentration while Ca and hydrocarbon particle classes concurrently decreased. On another day, sulfates were found to have increased significantly. The third event was only 4 h in duration and exhibited an increase in the number of submicron-sized K/hydrocarbons and sulfate-containing particles. In this last event, the hydrocarbons and a K to Fe ratio enrichment indicated there was likely a contribution from a combustion source. This work offers some of the first insights into single particle size and chemistry in a cold winter climate.

Aerosols↗

Cytokine release from alveolar macrophages exposed to ambient particulate matter: heterogeneity in relation to size, city and season.

BACKGROUND: Several studies have demonstrated an association between exposure to ambient particulate matter (PM) and respiratory and cardiovascular diseases. Inflammation seems to play an important role in the observed health effects. However, the predominant particle component(s) that drives the inflammation is still not fully clarified. In this study representative coarse (2.5-10 microm) and fine (0.1-2.5 microm) particulate samples from a western, an eastern, a northern and a southern European city (Amsterdam, Lodz, Oslo and Rome) were collected during three seasons (spring, summer and winter). All fractions were investigated with respect to cytokine-inducing potential in primary macrophages isolated from rat lung. The results were related to the physical and chemical parameters of the samples in order to disclose possible connections between inflammatory potential and specific characteristics of the particles. RESULTS: Compared on a gram-by gram basis, both site-specific and seasonal variations in the PM-induced cytokine responses were demonstrated. The samples collected in the eastern (Lodz) and southern (Rome) cities appeared to be the most potent. Seasonal variation was most obvious with the samples from Lodz, with the highest responses induced by the spring and summer samples. The site-specific or seasonal variation in cytokine release could not be attributed to variations in any of the chemical parameters. Coarse fractions from all cities were more potent to induce the inflammatory cytokines interleukin-6 and tumour necrosis factor-alpha than the corresponding fine fractions. Higher levels of specific elements such as iron and copper, some polycyclic aromatic hydrocarbons (PAHs) and endotoxin/lipopolysaccaride seemed to be prevalent in the coarse fractions. However, variations in the content of these components did not reflect the variation in cytokine release induced by the different coarse fractions. Addition of polymyxin B did not affect the particle-induced cytokine release, indicating that the variations in potency among the coarse fractions are not explained by endootoxin. CONCLUSION: The inflammatory potential of ambient PM demonstrated heterogeneity in relation to city and season. The coarse particle fractions were consistently more potent than the respective fine fractions. Though a higher level of some elements, PAH and endotoxin was found in the coarse fractions, the presence of specific components was not sufficient to explain all variations in PM-induced cytokine release.

Journal Article↗

Diurnal variations of individual organic compound constituents of ultrafine and accumulation mode particulate matter in the Los Angeles Basin.

Individual organic compounds can be used as tracers for primary sources of ambient particulate matter (PM) in chemical mass balance receptor models. Previous work has examined PM2.5 only and usually over long sampling periods encompassing entire days or longer. In this study, a high-flow-rate, low-pressure-drop ultrafine particle separator was deployed to collect sufficient mass for organic speciation of ultrafine and accumulation mode aerosol on a diurnal basis. Particles between 0.18 and 2.5 microm in diameter were collected on a quartz-fiber impaction substrate, and ultrafine particles below 0.18 microm were collected downstream on a high-volume filter. Four daily time period samples (morning, midday, evening, and overnight) were sampled over five weekdays to form a weekly average composite for each diurnal period. Sampling was conducted at two sites over two seasons; summer (August) and winter (January) samples were collected at both an urban site near downtown Los Angeles (University of Southern California) and a downwind, inland site in Riverside, CA. Hopanes, used as organic markers for vehicular emissions, were found to exist primarily in the ultrafine mode. Levoglucosan, an indicator of wood combustion, was quantified in both size ranges, but more was present in the accumulation mode particles. An indicator of photochemical secondary organic aerosol formation, 1,2-benzenedicarboxylic acid, was found primarily in the accumulation mode and varied with site, season, and time of day as one would expect for a photochemical product. The atmospheric variations of particulate cholesterol and other organic acids were also considered. By examining the diurnal variation, size-fractionation, and intercorrelations of individual organic compounds, the sources and atmospheric fate of these tracers can be better understood and their utility as molecular markers can be assessed.

Acids↗