SEARCH · PubMed Health

Results for “Pyrolysis”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

PubMed2002

Pyrolysis in the mesophase: a chemist's approach toward preparing carbon nano- and microparticles.

A mild pyrolytic method is proposed for the generation of different carbon micro- and nanoparticles that are either unprecedented or have never been reported under the present experimental conditions. A hexa-alkyl-substituted hexa-peri-hexabenzocoronene serves as a graphite-like starting compound that melts into a discotic liquid crystalline phase prior to heat-induced cross-linking and dehydrogenation. An essential feature of the process is that the liquid crystalline order persists even above 400 degrees C, i.e., during alkyl chain cleavage. The present approach bears a resemblance to carbomesophase formation during graphitization starting from pitch. The pyrolysis products are characterized by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry, optical microscopy, selected area electron diffraction (SAED), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM).

Journal Article↗

PubMed2005

Pyrolysis of mesoporous silica-immobilized 1,3-diphenylpropane. Impact of pore confinement and size.

Mesoporous silicas such as SBA-15 and MCM-41 are being actively investigated for potential applications in catalysis, separations, and synthesis of nanostructured materials. A new method for functionalizing these mesoporous silicas with aromatic phenols is described. The resulting novel hybrid materials possess silyl aryl ether linkages to the silica surface that are thermally stable to ca. 550 degrees C, but can be easily cleaved at room temperature with aqueous base for quantitative recovery of the organic moieties. The materials have been characterized by nitrogen physisorption, FTIR, NMR, and quantitative analysis of surface coverages. The maximum densities of 1,3-diphenylpropane (DPP) molecules that could be grafted to the surface were less than those measured on a nonporous, fumed silica (Cabosil) and were also found to decrease as a function of decreasing pore size (5.6-1.7 nm). This is a consequence of steric congestion in the pores that is magnified at the smaller pore sizes, consistent with parallel studies conducted using a conventional silylating reagent, 1,1,3,3-tetramethyldisilazane. Pyrolysis of the silica-immobilized DPP revealed that pore confinement leads to enhanced rates and altered product selectivity for this free-radical reaction compared with the nonporous silica, and the rates and selectivities also depended on pore size. The influence of confinement is discussed in terms of enhanced encounter frequencies for bimolecular reaction steps and pore surface curvature that alters the accessibility and resultant selectivity for hydrogen transfer steps.

Journal Article↗

PubMed2005

Magnetic and porous nanospheres from ultrasonic spray pyrolysis.

We have used an inexpensive high-frequency ultrasound generator from a household humidifier to create a useful source for ultrasonic spray pyrolysis and produced submicrometer silica particles that are porous on the nanometer scale. By using two heated zones, we first initiate polymerization of organic monomers in the presence of silica colloid, which creates in situ a composite of silica with an organic polymer, followed by a second heating to pyrolyze and remove the polymer. The morphology and surface area of the final porous silica are controlled by varying the silica-to-organic monomer ratio. In a single flow process, ferromagnetic cobalt nanoparticles can be easily encapsulated in the porous silica, and the resulting nanospheres are extremely resistant to air oxidation. Products were characterized by SEM, (S)TEM, EDS, XPS, and SQUID.

Journal Article↗

PubMed2005

Porous MoS2 synthesized by ultrasonic spray pyrolysis.

The hydrodesulfurization (HDS) activity of molybdenum sulfide-based catalysts is localized to the edges of this layered solid and is, therefore, highly dependent on the technique used to prepare the material. Here, ultrasonic spray pyrolysis (USP) was used to synthesize porous, nanostructured MoS2. Low surface area powders, not useful for catalysis, are generally produced by USP. This work shows that when combined with a dissolvable template, USP is capable of producing high surface area materials. An aqueous solution of ammonium tetrathiomolybdate and colloidal silica was nebulized and pyrolyzed to give a MoS2/SiO2 composite material. Leaching with HF removed the sacrificial SiO2, resulting in a highly porous MoS2 network with surface areas as high as 250 m2/g. Cobalt-promoted MoS2 networks were also synthesized. The thiophene HDS activities of these materials were substantially higher than those of unsupported MoS2 and RuS2 standards, illustrating the enhanced dispersion of the HDS active phase achieved by this synthetic technique.

Journal Article↗

PubMed2006

Optical characterization of eu-doped and undoped gd(2)o(3) nanoparticles synthesized by the hydrogen flame pyrolysis method.

Rare-earth-doped nanoparticles are promising materials for fluorescent labeling, as they are characterized by a high Stokes shift, narrow emission spectra, long lifetimes, minimized photobleaching, and low toxicity. We examined the structural and optical properties of europium-doped gadolinium oxide nanoparticles synthesized by the flame pyrolysis method, with specific emphasis on full spectral characterization and fluorescence kinetics. The emission-excitation characterization revealed the presence of predominantly monoclinic but also highly luminescent cubic phases with a prominent oxygen-to-europium charge-transfer band in the 230-260 nm range. A broad emission band in the visible region, corresponding to a similar band in undoped Gd(2)O(3), related to the matrix surface defects, was observed in time-gated spectroscopy of doped nanopowders. All of the examined nanopowders showed very short decay components, on the order of 2 ns, and much longer millisecond decay times characteristic of lanthanide ions. At intermediate times, on the order of 20-100 ns, a complex behavior of the decay was observed, indicative of progressive energy transfer to the lanthanide ion, which varied with different intrashell transitions. Structural characterization data by means of XRD measurements allowed for unambiguous determination of the Eu:Gd(2)O(3) crystallographic structure and cell dimensions to be consistent with a predominantly monoclinic phase.

Journal Article↗

PubMed2006

Formation of nearly monodisperse In2O3 nanodots and oriented-attached nanoflowers: hydrolysis and alcoholysis vs pyrolysis.

Single crystalline and nearly monodisperse In2O3 nanocrystals with both dot and flower shapes were synthesized in a simple reaction system. This system used indium carboxylates as the precursors with or without alcohol as the activating reagents in a hydrocarbon solvent under elevated temperatures. Limited ligand protection (LLP) led to three-dimensional (3D) oriented attachment of nanodots, resulting in 3D nanoflowers. When the system had sufficient ligand protection for the nanocrystals, nanodots were found to be the stable products. The diameters of nearly monodisperse nanodots and nanoflowers were varied in a range from approximately 5 to approximately 15 nm and approximately 15 to approximately 60 nm, respectively. The simple reaction system made it possible to have a systematic study of the reaction mechanisms along with the growth kinetics of nanocrystals. Hydrolysis and alcoholysis were identified as the major paths for this system, as opposed to pyrolysis. Both nearly monodispersed nanodots and nanoflowers can be made through either of the reaction pathways. Hydrolysis was found as a reversible pathway, and alcoholysis was confirmed to be irreversible. Consequently, a sufficient amount of alcohol was able to force the yield of nanocrystals, both dots and flowers, to unity.

Journal Article↗

PubMed2001

Flavor authenticity studies by (2)h/(1)h ratio determination using on-line gas chromatography pyrolysis isotope ratio mass spectrometry.

Based on (2)H/(1)H ratio measurements of commercial synthetic and "natural" references, the recently developed on-line gas chromatography pyrolysis isotope ratio mass spectrometry (HRGC-P-IRMS) technique was used to determine the delta(2)H(SMOW) values of the flavor compounds decanal, linalool, and linalyl acetate, as well as those of E-2-hexenal and E-2-hexenol in foods and essential oils. In preceding model studies, the influence of sample preparation steps (simultaneous distillation extraction, SDE; solvent extraction, SE; liquid liquid extraction, LLE) on the delta(2)H values was found to be negligible. For decanal, the typical (2)H abundance, with higher content of (2)H for synthetic material (delta(2)H(SMOW) from -90 to -156 per thousand) and lower (2)H content for natural references (delta(2)H(SMOW) from -138 to -262 per thousand) was observed. Although the delta(2)H data recorded for linalool did not allow one to distinguish between synthetic (delta(2)H(SMOW) from -207 to -301 per thousand) and natural (delta(2)H(SMOW) from -234 to -333 per thousand) materials, the situation was somewhat more encouraging for linalyl acetate; delta(2)H(SMOW) values from -199 to -239 per thousand and from -213 to -333 per thousand were found for synthetic and natural samples, respectively. E-2-Hexenal and E-2-hexenol showed clear-cut origin-dependent differences in their (2)H/(1)H ratios; that is, delta(2)H(SMOW) values from -14 to -109 per thousand and from -263 to -415 per thousand as well as from -41 to -131 per thousand and from -238 to -348 per thousand were recorded for products from synthetic and natural origins, respectively.

Acyclic Monoterpenes↗

PubMed2002

Pyrolysis of lignin in the presence of tetramethylammonium hydroxide (TMAH): products stemming from beta-5 substructures.

Lignin model compounds, synthetic lignins, and cedar wood have been analyzed by pyrolysis-gas chromatography(-mass spectrometry) in the presence of tetramethylammonium hydroxide (TMAH) to examine the behavior of beta-5 substructures specifically under these conditions. Two model compounds contained a beta-5 linkage and a gamma-CH2OH group. The phenolic model compound produced stilbene products by way of a formaldehyde elimination of the gamma-CH2OH. The nonphenolic model compound underwent dehydration to give arylbenzofuran products. Dehydrogenation polymers of coniferyl alcohol gave a large amount of stilbene products in TMAH/pyrolysis. TMAH/pyrolysis of a Japanese cedar (Cryptomeria japonica) wood yielded a very small amount of stilbene products. The results demonstrated that synthetic lignins are rich in terminal beta-5 substructures, but cedar (a softwood) contains a paucity of the terminal beta-5 substructures.

Gas Chromatography-Mass Spectrometry↗

PubMed2005

SPME-GC-pyrolysis-AFS determination of methylmercury in marine fish products by alkaline sample preparation and aqueous phase phenylation derivatization.

Characterization of a cost-efficient analytical method based on alkaline sample digestion with KOH and NaOH, followed by aqueous phase phenylation derivatization with NaBPh4 and solid phase microextraction (SPME) for the determination of methylmercury in typical fish-containing food samples commercially available in Hungary, is reported. The sample preparation procedure along with the applied SPME-GC-pyrolysis-AFS system was validated by measuring certified reference materials (CRM) BCR-464, TORT-2, and a candidate CRM BCR 710. To carry out an estimation of average Hungarian methylmercury exposures via marine fish and/or fish-containing food consumption, 16 commercially available products and 3 pooled representative seafood samples of-according to a previous European survey--the three most consumed fish species in Hungary, herring, sardines, and hake, were analyzed. Methylmercury concentrations of the analyzed samples were in the range 0.016-0.137 microg of MeHg g(-1) dry weight as Hg.

Chromatography, Gas↗

PubMed1999

Influence of the moisture content on the composition of the liquid smoke produced in the pyrolysis process of Fagus sylvatica L. wood.

The pyrolysis of several samples of sawdust of Fagus sylvatica L. wood with different moisture contents was carried out, keeping all other smoke generation parameters constant. However, parameters such as smoke production length and maximum temperature reached were affected by the moisture content of the sample and varied in the different pyrolytic runs. The acidity and the composition of the liquid smokes obtained were determined, this latter by means of gas chromatography/mass spectrometry and gas chromatography with flame ionization detection. The acidity and composition of the liquid smoke produced were affected not only by the moisture content of the sawdust sample but also by the smoke generation length and by the temperature of the process. The highest yields in components were produced from samples with low moisture content that underwent a short pyrolytic process. Some compounds, with important properties from an organoleptic and preservative point of view, were not generated from samples with high moisture content. Equations that closely relate yield of the total components or of groups of components or of individual components with parameters such as moisture content, length of the process, and temperature were obtained; these equations predict yield data of liquid smoke components with a satisfactory degree of approximation.

Flame Ionization↗

PubMed2001

Flash vacuum pyrolysis over solid catalysts. 1. Pyrazoles over zeolites.

Flash vacuum pyrolysis (fvp) reactions of 1H-pyrazole (1), 3,5-dimethylpyrazole (2), and 3,5-diphenylpyrazole (3) were carried out over zeolites. Reactions were performed using ZCOY-7, NH(4)-Y, and Na-Y zeolites. Reaction temperatures of heterogeneous reactions were lower than the corresponding temperatures in the homogeneous system, showing a catalytic effect of the zeolites. Compounds 1-3 afforded nitrogen extrusion in homogeneous fvp reactions while in the heterogeneous ones different reactions were present. Compounds 1 and 2 also afforded nitrogen extrusion; products arising from ring fragmentation were found in reactions of 2 and 3 while an isomeric imidazole was isolated in reactions of 3. Isomerization of 3 is attributed to a transition-state selectivity by the catalyst due to the relation between the size of the molecule and the cavity of the zeolite. This isomerization reaction was present only when zeolites with active Brönsted sites were used.

Journal Article↗

PubMed2002

Pyrolysis of p-benzosemiquinone.

In contrast to the thermolysis of p-benzoquinone, which does not decompose until the temperature is over 800 degrees C, and then primarily yields vinylacetylene, the corresponding anion radical, precipitated from liquid ammonia [Na(+)(NH(3))C(6)H(4)O(2)(*-)], decomposes at 380 degrees C and fragments primarily into phenol, hydroquinone, ammonia, methane, carbon monoxide, hydrogen, and minor amounts of other simple compounds. When the benzoquinone is replaced with perdeuteriobenzoquinone, deuterium and hydrogen are randomly scrambled into the products, and both ND(3) and CH(4) are formed. When the hot pyrolysis container is completely sealed, preventing the escape of volatile materials, p-aminophenol, as opposed to phenol, is the major liquid product.

Aminophenols↗

PubMed2002

Flash vacuum pyrolysis over solid catalysts. 2. pyrazoles over hydrotalcites.

Flash vacuum pyrolysis (fvp) reactions of NH-pyrazole (1) and 3,5-diphenylpyrazole (2) were investigated in the presence of anionic clays having hydrotalcite structure (HT). Solid catalysts with Mg:Al ratio equal to 2:1 containing carbonate (HT-1), nitrate (HT-2), and silicate (HT-3) as interlayer anions were employed. Between 400 and 600 degrees C, compound 1 remained almost unchanged and only unidentified volatile products were detected in small amounts. In contrast, 2 afforded benzonitrile (3) and phenylacetonitrile (4) by a ring fragmentation reaction at 450 degrees C. At a higher temperature (660 degrees C), the same products obtained in homogeneous fvp reactions, i.e., 2-phenylindene (5) and 3-phenylindene (6), were obtained showing no catalysis by HT under these conditions. Results showed that the yield is strongly dependent on the nature of the interlayer anion in the hydrotalcite structure. In comparison with reactions of 2 over zeolites, HTs exhibit selectivity for ring fragmentation reaction.

Journal Article↗

PubMed2005

N-Vinyl- and C-vinylpyrroles from azafulvenium methides. flash vacuum pyrolysis route to 5-Oxo-5H-pyrrolizines and 1-azabenzo[f]azulenes.

1-Azafulvenium methides, generated from pyrrolo[1,2-c]thiazole-2,2-dioxides' thermal extrusion of sulfur dioxide, led to the synthesis of functionalized pyrroles. The intramolecular trapping of these transient 8pi 1,7-dipoles in pericyclic reactions, namely sigmatropic [1,8]H shifts and 1,7-electrocyclization, allowed the synthesis of N-vinylpyrroles and C-vinylpyrroles which, under flash vacuum pyrolysis conditions, are converted into 5-oxo-5H-pyrrolizines or 4-oxo-1,4-dihydro-1-aza-benzo[f]azulenes, respectively. These heterocycles can also be obtained directly from FVP of pyrrolo[1,2-c]thiazole 2,2-dioxides. The synthesis and X-ray structure of a new 6-oxocyclopenta[b]pyrrole derivative is also reported.

Journal Article↗

PubMed2005

Theoretical studies on the vibrational spectra, thermodynamic properties, detonation properties, and pyrolysis mechanisms for polynitroadamantanes.

To look for high energy density materials (HEDM), the relationships between the structures and the performances of polynitroadamantanes (PNAs) were studied. The assigned infrared spectra of PNAs obtained at the density functional theory (DFT) B3LYP/6-31G level were used to compute the thermodynamic properties on the basis of the principle of statistical thermodynamics. The thermodynamic properties are linearly related with the number of nitro groups as well as with the temperatures. Detonation properties of PNAs were evaluated by using the Kamlet-Jacobs equation based on the calculated densities and heats of formation for titled compounds, and it is found that only when the number of nitro groups of PNA is equal to or more than eight can it be possible for PNAs to be used as HEDMs. The relative stabilities of PNAs were studied by the pyrolysis mechanism using the UHF-PM3 method. The homolysis of the C-NO2 bond is predicted to be the initial step of thermal decomposition. The activation energies (Ea) for the homolysis decrease with the number of nitro groups being increased on the whole. The stability order of dinitroadamantane isomers derived from the interactions among nitro groups is consistent with what is determined by Ea. The relations between the Ea's and the electronic structure parameters were discussed. In combination with the stability, PNA (1,2,3,4,5,6,7,8,9,10-) is recommended as the target of HEDM with insensitivity.

Journal Article↗

PubMed2005

A systematically generated, pressure-dependent mechanism for high-conversion ethane pyrolysis. 2. Radical disproportionations, missing reaction families, and the consequences of pressure dependence.

A previous, companion paper of this work (preceding paper in this issue) systematically developed a pressure-dependent reaction mechanism for the high-conversion pyrolysis of ethane, as studied experimentally by Glasier and Pacey. By combining conventional equilibrium, sensitivity, and reaction pathway analyses, that study identified a complex set of reaction pathways governing the formation and destruction of the important minor products acetylene, propylene, 1,3-butadiene, and benzene, which are pyrocarbon deposition precursors. To more confidently understand, and potentially manipulate, the complex chemistry governing deposition precursors, this work examines in more detail (1) the role of large sets of radical disproportionation reactions in forming the minor products, (2) the consequence of ignoring certain reactions during mechanism construction, (3) the appropriateness of the plug flow assumption used to model the reactor, and (4) the importance of reaction pressure dependence to the predictions of the minor product concentrations. We find that the predicted benzene concentration is sensitive to the presence of a specific, large collection of radical disproportionation reactions, typically neglected in most modeling efforts and of consequence only in the aggregate. Reaction families allowing Diels-Alder reaction, ene reaction, and triplet ethylene formation are safely ignored during model construction for the experimental conditions, but two specific reactions proposed in the literature, which rapidly convert fulvene to benzene, potentially explain the underprediction of benzene by the generated model. However, the rates proposed for these reactions are either unrealistically fast, or unconfirmed. We find the plug flow assumption reasonable in most respects, but its neglect of H-atom diffusion could explain the mechanism's systematic underprediction of hydrogen concentration at longer residence times. Finally, we demonstrate that accurate predictions of the minor product predictions appear to require the systematic treatment of pressure dependence employed by our mechanism generation algorithm. Changing the pressure in the experimental reactor alters the distribution of the minor products, or deposition precursors, through changes in the pressure-dependent reaction rates involved in their formation. We close with suggestions for the future development of automated mechanism generation tools, based on the current results.

Journal Article↗

PubMed2005

Synthesis, characterization, and stability of Fe-MCM-41 for production of carbon nanotubes by acetylene pyrolysis.

Fe-substituted MCM-41 molecular sieves with ca. 1, 2, and 3 wt % Fe were synthesized hydrothermally using different sources of colloidal silica (HiSil and Cab-O-Sil) and characterized by ICP, XRD, N2 physisorption, UV-vis, EPR, TPR, and X-ray absorption. Catalysts synthesized from Cab-O-Sil showed higher structural order and stability than those from HiSil. The local environment of Fe in the mesoporous material as studied by UV-vis reveals the dominance of framework Fe in all the as-synthesized Fe-MCM-41 samples. Dislodgement of some Fe species to extraframework location occurs upon calcination, and this effect is more severe for Fe-MCM-41 (2 wt %) and Fe-MCM-41 (3 wt %), as confirmed by EPR and X-ray absorption. These materials have been used as catalytic templates for the production of carbon nanotubes (CNTs) by acetylene pyrolysis at atmospheric pressure. A relationship between the Fe loading in MCM-41 and the carbon species produced during this reaction has been established. Using our optimized conditions for this system, Fe-MCM-41 with ca. 2 wt % Fe showed the best results with particularly high selectivity for single-wall carbon nanotube (SWNT) production. This catalyst was selective for carbon nanotubes with a low amount of amorphous carbon for a narrow range of temperatures from 1073 to 1123 K. To account for the different selectivity of these catalysts for CNTs production, the local environment and chemical state of Fe in the used catalyst was further probed by X-band EPR.

Journal Article↗

PubMed2006

Formation of naphthalene, indene, and benzene from cyclopentadiene pyrolysis: a DFT study.

Four new reaction pathways for polycyclic aromatic hydrocarbon growth from cyclopentadiene pyrolysis are proposed and investigated using the B3LYP/6-31G(d,p) level of theory. These pathways allow for the production of indene, naphthalene, and benzene through intramolecular addition, C-H beta-scission, and C-C beta-scission reaction mechanisms, respectively. Results show that the intramolecular addition channel is favored at low temperatures, and the C-H beta-scission channel and the newly identified C-C beta-scission pathway become significant when the temperature increases. These results are in qualitative agreement with the experimental results previously obtained by this research group indicating that the main product at low temperature is indene, while benzene and naphthalene production dominate at the high-temperature end.

Algorithms↗