SEARCH · PubMed Health

Results for “Biodegradation, Environmental”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

PubMed2001

Screening of four species of detritivorous (humus-former) earthworms for sustainable vermicomposting of paper waste.

Four specices of detritivorous (humus-former) earthworms were tested for their ability to vermicompost paper waste blended with cowdung in 6:1 (w/w) ratio. The anecic Lampito mauritii, Kinberg and the epigeic Eudrilus eugeniae, Kinberg were the most effective of the four species employed; 20 animals of each of these species generated castings amounting to about 52% of the feed mass (75 g) per fortnight. The performance of these two species was followed by the anecic Drawida willsi, Michaelsen and the epigeic Perionyx excavatus, Perrier; they achieved approximately 46% vermiconversion in comparable settings. The vermireactors were sustainable as the animals have remained consistently healthy and reproductive over a period of six months, and are continuing to remain so, turning in a steadily rising vermicast output. During this period E. eugeniae have grown to 2.3 times their original weight while the other three species have more than trebled their weights. The studies establish the feasibility of vermicomposting as a viable process for the gainful utilization of paper waste in an environmentally clean manner. They also indicate that all the four species of the worms screened by us are suitable for the process, with L. mauritii and E. eugeniae a shade more efficient than the other two species.

Animals↗

PubMed2004

Evaluation of solid-state bioconversion of domestic wastewater sludge as a promising environmental-friendly disposal technique.

Natural and environmental-friendly disposal of wastewater sludge is a great concern. Recently, biological treatment has played prominent roles in bioremediation of complex hydrocarbon- rich contaminants. Composting is quite an old biological-based process that is being practiced but it could not create a great impact in the minds of concerned researchers. The present study was conducted to evaluate the feasibility of the solid-state bioconversion (SSB) processes in the biodegradation of wastewater sludge by exploiting this promising technique to rejuvenate the conventional process. The Indah Water Konsortium (IWK) domestic wastewater treatment plant (DWTP) sludge was considered for evaluation of SSB by monitoring the microbial growth and its subsequent roles in biodegradation under two conditions: (i) flask (F) and (ii) composting bin (CB) cultures. Sterile and semi-sterile environments were allowed in the F and the CB, respectively, using two mixed fungal cultures, Trichoderma harzianum with Phanerochaete chrysosporium 2094 (T/P) and T. harzianum with Mucor hiemalis (T/M) and two bulking materials, sawdust (SD) and rice straw (RS). The significant growth and multiplication of both the mixed fungal cultures were reflected in soluble protein, glucosamine and color intensity measurement of the water extract. The color intensity and pH of the water extract significantly increased and supported the higher growth of microbes and bioconversion. The most encouraging results of microbial growth and subsequent bioconversion were exhibited in the RS than the SD. A comparatively higher decrease of organic matter (OM) % and C/N ratio were attained in the CB than the F, which implied a higher bioconversion. But the measurement of soluble protein, glucosamine and color intensity exhibited higher values in the F than the CB. The final pH drop was higher in the CB than the F, which implied that a higher nitrification occurred in the CB associated with a higher release of H+ ions. Both the mixed cultures performed almost equal roles in all cases except the changes in moisture content.

Biodegradation, Environmental↗

PubMed1999

Bioremediation of petroleum hydrocarbon contaminants in marine habitats.

Bioremediation is being increasingly seen as an effective, environmentally benign treatment for shorelines contaminated as a result of marine oil spills. Despite a relatively long history of research on oil-spill bioremediation, it remains an essentially empirical technology and many of the factors that control bioremediation have yet to be adequately understood. Nutrient amendment is a widely accepted practice in oil-spill bioremediation but there is scant understanding of the systematic effects of nutrient amendment on biodegradative microbial populations or the progress of bioremediation. Recent laboratory and field research suggests that resource-ratio theory may provide a theoretical framework that explains the effects of nutrient amendment on indigenous microbial populations. In particular, the theory has been invoked to explain recent observations that nutrient levels, and their relative concentration, influence the composition of hydrocarbon-degrading microbial populations. This in turn influences the biodegradation rate of aliphatic and aromatic hydrocarbons. If such results are confirmed in the field, then it may be possible to use this theoretical framework to select bioremediation treatments that specifically encourage the rapid destruction of the most toxic components of complex pollutant mixtures.

Anaerobiosis↗

PubMed1975

Environmental and toxicological planning in polymer production and disposal.

There is neither a prescribed format nor a rigid sequence of testing to follow for the assessment of health and environmental effects of chemicals. Conventional animal toxicity tests plus medical surveillance and monitoring of exposed human populations will provide knowledge of the biological effects of chemicals and assurance that they can be handled safely. Useful information also can be derived from other test procedures. These include extraction studies to measure the amounts of additives which can leach from polymers, toxicity tests using aquatic organisms and birds, and determination of the biodegradability of materials and their potential for accumulation and magnification in biological systems. Current concern over pyrolysis products of polymers points up the need for defining the variables involved and development of test procedures by which meaningful evaluations of potential health hazards can be made.

Animals↗

PubMed1993

Environmental fate of chlorpyrifos.

Chlorpyrifos is an organophosphorus compound that displays broad-spectrum insecticidal activity against a number of important arthropod pests. As a result, it is employed in a wide variety of agricultural and specialty pest control scenarios. Various formulations of chlorpyrifos have been developed to maximize stability and contact with pests and minimize human exposure. From corn agriculture in the United States to termite control in Japan to cotton agriculture in Egypt to citrus horticulture in Spain, chloropyrifos has been successfully employed to combat insect and other arthropod pests threatening the production of food and fiber and maintenance of human health. Due to the nonpolar nature of the chlorpyrifos molecule, it possesses a low water solubility (< 2 ppm) and great tendency to partition from aqueous into organic phases in the environment (log P of 4.7-5.3). It is characterized by an average soil and sediment sorption coefficient (Koc) of 8498 and aquatic bioconcentration factor of 100-5100 in fish. As a result of its high propensity for sorption, its movement through and over the soil profile is limited. It has been found to be relatively immobile vertically in soil and has not proved to be a groundwater contaminant. Surface runoff and erosion mobility are also low, and, in general, less than 0.3% of soil surface application has been observed to move even under the heaviest simulated precipitation conditions. Chlorpyrifos has an intermediate vapor pressure (2 x 10(-5) mm Hg, 25 degrees C), and under some conditions volatility is a significant mechanism of dissipation. This is especially true for plant foliage, from which it is the major means of loss, to some extent from water surfaces, and to a lesser degree from moist soil surfaces. Chlorpyrifos is a degradable compound, and both abiotic and biotic transformation processes effect its degradation within environmental compartments (Fig. 1). In all cases, the major pathway of transformation involves cleavage of the phosphate ester bond to form 3,5,6-trichloro-2-pyridinol (TCP). Hydrolytic transformation, although relatively slow in pure water under ideal conditions (half-lives of 29-74 d at pH 7, 25 degrees C), may be catalyzed under certain environmental conditions. These include alkaline conditions in water (pH > or = 8) and alkaline (pH > or = 7.5) and air-dry conditions in soil, and in some soils hydrolysis may be the major means of dissipation (Fig. 2).(ABSTRACT TRUNCATED AT 400 WORDS)

Agriculture↗

PubMed1998

Environmental degradation pathways for the breakdown of polydimethylsiloxanes.

The following paper describes how polydimethylsiloxane (PDMS) polymers, which are present in a wide range of consumer products may undergo environmental degradation in the environment. The mechanism involves a biological degradation by bacteria and/or fungi, which takes place after an initial abiotic reaction initiates depolymerisation. The available information indicates that ultimately PDMS is converted to its inorganic constituents, namely carbon dioxide and silicic acid.

Bacteria↗

PubMed2005

In vivo biostability of polyether polyurethanes with polyethylene oxide surface-modifying end groups; resistance to biologic oxidation and stress cracking.

Polyethylene oxide (PEO) on polymer surfaces has been reported to reduce cellular adhesion, a very desirable property for cardiac pacing leads. A Shore 80A polyether polyurethane with up to 6% PEO surface-modifying end groups (SME) was evaluated for its chronic in vivo biostability. In a short-term (12 week) screening test, strained samples appeared to develop the same surface oxidation as unmodified polymer, but did not produce visible cracking > or =500x, prompting a longer-term study. By the time the longer-term study was initiated, most of the PEO SME had disappeared from the starting material's surface. After 1 year in vivo, surface oxidation, shallow surface cracking, and environmental stress cracking (ESC) developed on highly strained samples to the point of failure, so that there was no significant difference between the SME polymer and its control (the same polymer without SME). No further change was seen for up to 2 years of implantation. Unstrained PEO SME polymer developed shallow surface cracking, but no ESC up to 2 years of implantation. Thus, PEO SME slightly delayed, but did not stop biodegradation, and under unstrained conditions, has no adverse effect on biostability.

Absorbable Implants↗

PubMed2002

Hazard identification for 3,5-dichlorophenol in the aquatic environment.

The risk assessment of substances in various environmental compartments is essential for their proper, safe and environmentally friendly production, handling, use and final deposition or destruction. Hazard identification is an important part of risk assessment. The aim of our research was to present a methodology for the hazard identification of substances dangerous to the aquatic environment according to the 93/21/EEC Directive relating to the classification, packaging and labelling of dangerous substances, from the adverse effect assessment of chemicals in European Union. A battery of toxicity tests and biodegradability studies with 3,5-dichlorophenol were performed. The substance was classified as toxic to aquatic organisms with possible long-term adverse effects. The presented methodology assures reliable data for the classification and labelling of substances according to their harmful effect on aquatic biota, suitable for the competent authorities at the national and EU level.

Animals↗

PubMed2001

Development of a novel bioreactor system for treatment of gaseous benzene.

A novel, continuous bioreactor system combining a bubble column (absorption section) and a two-phase bioreactor (degradation section) has been designed to treat a gas stream containing benzene. The bubble column contained hexadecane as an absorbent for benzene, and was systemically chosen considering physical, biological, environmental, operational, and economic factors. This solvent has infinite solubility for benzene and very low volatility. After absorbing benzene in the bubble column, the hexadecane served as the organic phase of the two-phase partitioning bioreactor, transferring benzene into the aqueous phase where it was degraded by Alcaligenes xylosoxidans Y234. The hexadecane was then continuously recirculated back to the absorber section for the removal of additional benzene. All mass transfer and biodegradation characteristics in this system were investigated prior to operation of the integrated unit, and these included: the mass transfer rate of benzene in the absorption column; the mass transfer rate of benzene from the organic phase into the aqueous phase in the two-phase bioreactor; the stripping rate of benzene out of the two-phase bioreactor, etc. All of these parameters were incorporated into model equations, which were used to investigate the effects of operating conditions on the performance of the system. Finally, two experiments were conducted to show the feasibility of this system. Based on an aqueous bioreactor volume of 1 L, when the inlet gas flow and gaseous benzene concentration were 120 L/h and 4.2 mg/L, respectively, the benzene removal efficiency was 75% at steady state. This process is believed to be very practical for the treatment of high concentrations of gaseous pollutants, and represents an alternative to the use of biofilters.

Alcaligenes↗

PubMed2004

EROD activities in a primary cell culture of grass carp (Ctenopharyngodon idellus) hepatocytes exposed to polychlorinated aromatic hydrocarbonas.

Aryl hydrocarbon (Ah) receptor (Ah-agonist) effects of environmental samples containing polychlorinated aromatic hydrocarbons were evaluated using a 7-ethoxyresorufin-O-deethylase (EROD) assay of a primary hepatocyte culture from grass carp (Ctenopharyngodon idellus). The results were compared with those obtained from the assay using the rat hepatoma cell line H4IIE and chemical analysis using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). A dose-response relationship was observed between the EROD activities, either from primary hepatocyte culture assay or from H4IIE assay, and concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). The results showed that the assay based on the H4IIE cell line (EC50=0.83 pg/mL) is more sensitive to TCDD than the assay based on primary hepatocyte culture (EC50=9.7 pg/mL). In tests of environmental samples, the results from the assay using primary hepatocyte culture were comparable to those from the assay using the H4IIE cell line and chemical analysis of concentrations of mixtures of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF). The lack of a change in the activities of glutathione-S-transferase (GST) and lactate dehydrogenase (LDH) in cell culture upon exposure to TCDD indirectly indicates that the compound is persistent to biodegradation in the cell culture system.

Animals↗

PubMedDate not supplied

Chromatographic enantiomer separation of chiral xenobiotics and their metabolites--a versatile tool for process studies in marine and terrestrial ecosystems.

A review discussing methodical aspects of enantioselective chromatographic separation of chiral environmental xenobiotics as well as examples for process studies reported in literature. The process studies include microbial transformation of chiral pollutants in aquatic ecosystems, their enzymatic transformation in biota, their photochemical degradation, air/sea exchange processes and atmospheric long range transport, and enantioselective toxic effects.

Animals↗

PubMed2005

Fate and transport of monoterpenes through soils. Part I. Prediction of temperature dependent soil fate model input-parameters.

Monoterpenes are C10H(n)O(n') compounds of natural origin and are potentially environmentally safe substitutes for traditional pesticides. Still, an assessment of their environmental behaviour is required. As a first step in a theoretical study focussing on monoterpenes applied as pesticides to terrestrial environments, soil fate model input-parameters were determined for 20 monoterpenes with widely different structural characteristics. Input-parameters are the water solubility (S(W)), vapour pressure (P), n-octanol-water partition coefficient (K(OW)), atmospheric air and bulk water diffusion coefficients (D(A)air and D(W)water), first order biodegradation rate constants (k), and their temperature dependence. Values for these parameters were estimated or taken from previous experimental work. The quality of the estimations was discussed by focussing on their statistics and by comparison with available experimental data. From these properties, the air-water partition coefficient (K(AW), Henry's Law constant), the interface-water partition coefficient (K(IW)) and the organic matter-water partition coefficient (K(OM)) could be estimated with varying levels of accuracy. In general, little experimental data turned out to be available on biodegradation rate constants and on the temperature dependence of physico-chemical parameters.

1-Octanol↗

PubMed2006

An integrated numerical and physical modeling system for an enhanced in situ bioremediation process.

Groundwater contamination due to releases of petroleum products is a major environmental concern in many urban districts and industrial zones. Over the past years, a few studies were undertaken to address in situ bioremediation processes coupled with contaminant transport in two- or three-dimensional domains. However, they were concentrated on natural attenuation processes for petroleum contaminants or enhanced in situ bioremediation processes in laboratory columns. In this study, an integrated numerical and physical modeling system is developed for simulating an enhanced in situ biodegradation (EISB) process coupled with three-dimensional multiphase multicomponent flow and transport simulation in a multi-dimensional pilot-scale physical model. The designed pilot-scale physical model is effective in tackling natural attenuation and EISB processes for site remediation. The simulation results demonstrate that the developed system is effective in modeling the EISB process, and can thus be used for investigating the effects of various uncertainties.

Biodegradation, Environmental↗

PubMed2004

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes.

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.

Bacteria, Anaerobic↗

PubMed2006

Application of monitored natural attenuation to remediate a petroleum-hydrocarbon spill site.

Contamination of groundwater by petroleum-hydrocarbons is a serious environmental problem. The Monitored Natural Attenuation (MNA) approach is a passive remediation to degrade and dissipate groundwater contaminants in situ. In this study, a full-scale natural bioremediation investigation was conducted at a gasoline spill site. Results show that concentrations of major contaminants (benzene, toluene, ethylbenzene, and xylenes) dropped to below detection limit before they reached the downgradient monitor well located 280 m from the spill location. The results also reveal that natural biodegradation was the major cause of the observed contaminant reduction. The calculated natural first-order attenuation rates for BTEX and 1,2,4-trimethylbenzene (1,2,4-TMB) ranged from 0.051 (benzene) to 0.189 1/day (1,2,4-TMB). Evidence for the occurrence of natural attenuation includes the following: (1) depletion of dissolved oxygen, nitrate, and sulfate; (2) production of dissolved ferrous iron, sulfide, and CO2; (3) decreased BTEX concentrations and BTEX as carbon to TOC ratio along the transport path; (4) increased alkalinity and microbial populations; (5) limited spreading of the BTEX plume; and (6) preferential removal of certain BTEX components along the transport path. Additionally, the biodegradation capacity (44.73 mg/L) for BTEX and 1,2,4-TMB was much higher than other detected contaminants within the plume. Hence, natural attenuation can effectively contain the plume, and biodegradation processes played an important role in contaminant removal.

Benzene Derivatives↗

PubMedDate not supplied

Surface-active lipids in rhodococci.

Like other hydrocarbon-oxidising bacteria, rhodococci respond to the presence of alkanes by producing biosurfactant molecules to improve their ability to utilise these hydrophobic compounds as growth substrates. In the rhodococci these surfactants are predominantly glycolipids, the majority of which remain cell-bound during unrestricted growth. Most work has been done on the trehalose mycolates formed by Rhodococcus erythropolis, but nitrogen-limited conditions lead to the production of anionic trehalose tetraesters also. As surfactants, these compounds, whether purified or in crude form, are able to reduce the surface tension of water from 72 mN m-1 to a low of 26, thus making them among the most potent biosurfactants known. They are also able to reduce the interfacial tension between water and a hydrophobic phase (e.g. n-hexadecane) from 43 mN m-1 to values less than one (Table 1). Biosurfactants have about a ten- to 40-fold lower critical micelle concentration than synthetic surfactants. Such properties suggest a range of industrial applications, where a variety of surface-active characteristics are appropriate. Interest in biosurfactants as industrial chemicals results from the toxicity of many petrochemical-derived surfactants. Currently world-wide surfactant production is on a very large scale, and the demand for them is increasing. However, the drive towards less environmentally damaging chemicals makes biosurfactants attractive as they have lower toxicity. The reason they have not achieved a significant market share is the cost of production, which is considerably higher than for synthetic surfactants. This problem is being addressed using several strategies. An approach where there is great scope for improvement with the rhodococci is an understanding of the genetic basis of glycolipid production, which is largely unknown. They may find applications in the near future in the environmental remediation industries, where the requirement for purified molecules is of less importance. This review summarises knowledge of the chemistry, biochemistry and production of Rhodococcus surface-active lipids. Where they have been used, or there is potential for use, in industrial applications is discussed.

Biodegradation, Environmental↗

PubMedDate not supplied

Analysis of transgenic Indian mustard plants for phytoremediation of metal-contaminated mine tailings.

Transgenic Indian mustard [Brassica juncea (L.) Czern.] plants overproducing the enzymes gamma-glutamylcysteine synthetase (ECS) or glutathione synthetase (GS) were shown previously to have increased levels of the metal-binding thiol peptides phytochelatins and glutathione, and enhanced Cd tolerance and accumulation. Furthermore, transgenic Indian mustard plants overexpressing adenosine triphosphate sulfurylase (APS) were shown to have higher levels of glutathione and total thiols. These results were obtained with a solution culture. To better examine the phytoremediation potential of these transgenics, a greenhouse experiment was performed in which the transgenics were grown on metal-contaminated soil collected from a USEPA Superfund site near Leadville, Colorado. A grass mixture used for revegetation of the site was included for comparison. The ECS and GS transgenics accumulated significantly (P < 0.05) more metal in their shoot than wild-type (WT) Indian mustard, while the APS plants did not. Of the six metals tested, the ECS and GS transgenics accumulated 1.5-fold more Cd, and 1.5- to 2-fold more Zn, compared with wild-type Indian mustard. Furthermore, the ECS transgenics accumulated 2.4- to 3-fold more Cr, Cu, and Pb, relative to WT. The grass mixture accumulated significantly less metal than Indian mustard: approximately 2-fold less Cd, Cu, Mn, and Zn, and 5.7-fold less Pb than WT Indian mustard. All transgenics removed significantly more metal from the soil compared with WT Indian mustard or an unplanted control. While WT did not remove more metal than the unplanted control for any of the metals tested, all three types of transgenics significantly reduced the soil metal concentration, and removed between 6% (Zn) and 25% (Cd) of the soil metal. This study is the first to demonstrate enhanced phytoextraction potential of transgenic plants using polluted environmental soil. The results confirm the importance of metal-binding peptides for plant metal accumulation and show that results from hydroponic systems have value as an indicator for phytoremediation potential.

Biodegradation, Environmental↗

PubMed2004

Batch experiment on H2S degradation by bacteria immobilised on activated carbons.

Biological treatments of odorous compounds, as compared to chemical or physical technologies, are in general ecologically and environmentally favourable. However, there are some inefficiencies relative to the media used in biofiltration processes, such as the need for an adequate residence time; the limited lifetime, and pore blockage of media, which at present render the technology economically non-viable. The aim of the study is to develop novel active media to be used in performance-enhanced biofiltration processes, by achieving an optimum balance and combination of the media adsorption capacity with the biodegradation of H2S through the bacteria immobilised on the media. An enrichment culture was obtained from activated sludges in order to metabolise thiosulphate. Batch-wise experiments were conducted to optimise the bacteria immobilisation on activated carbon, so as to develop a novel "biocarbon". Biofilm was mostly developed through culturing the bacteria with the presence of carbons in mineral media. SEM and BET tests of the carbon along with the culturing process were used to identify, respectively, the biofilm development and biocarbon porosity. Breakthrough tests evaluated the biocarbon performance with varying gas resistance time, inlet H2S concentration, and type of support materials. Fundamental issues were discussed, including type of support material, mode of bacteria immobilisation, pore blockages, and biodegradation kinetics, etc. This batch-wise study provides a basis for our future research on optimisation of the biofiltration process using a bio-trickling reactor.

Adsorption↗